Chicken meat quality as a function of fasting period and water spray

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Carne de avestruz: rendimento de carcaça e aspectos físicos e químicos

O objetivo deste estudo foi avaliar o rendimento de carcaça e os aspectos físicos e químicos da carne de avestruzes abatidos comercialmente no Brasil. E para isso acompanhou-se o processo de abate e desossa de um abatedouro comercial de avestruzes. Utilizou-se 12 machos e 12 fêmeas, com idade entre 13 e 15 meses, da subespécie African Black. No momento da desossa foram avaliados: o pH, a temperatura e a coloração dos músculos. A composição química e mineral foi determinada segundo metodologias propostas pela AOAC. O pH apresenta diferença significativa em relação aos diferentes músculos. Ao avaliar a coloração dos músculos em relação ao sexo, observou-se que a luminosidade foi maior para os machos, contribuindo significativamente para que a carne fosse mais brilhante que a das fêmeas. Houve diferença significativa em relação ao sexo sobre os teores de proteína bruta e lipídios. O teor de minerais não apresentou diferença significativa em relação ao sexo. Porém, observa-se diferença significativa entre os diferentes músculos avaliados. Conclui-se então que, a rentabilidade das carcaças de avestruzes tem sido comparável à média mundial, demonstrando o empenho entre os criadores em produzir carne de avestruz de maneira competitiva, além da mesma apresentar características organolépticas e nutricionais que agradam ao consumidor.

Avaliação e caracterização da qualidade da carne de peito (Pectoralis major) de matrizes pesadas em final de ciclo produtivo

Este trabalho teve por objetivo avaliar as características da qualidade da carne de matrizes pesadas de descarte. Para isto, foram coletadas 40 amostras de filés de peito (Pectoralis major) de matrizes da linhagem Ross com 68 e 69 semanas de idade. As coletas foram divididas em duas, com 20 amostras coletadas em cada uma delas. No tempo zero (após o resfriamento) foi medido o pH e coletados fragmentos para a avaliação do valor R. Nos tempos 4 e 24 horas post-mortem, foram feitas as seguintes análises: pH, valor R, cor objetiva, perda por exsudação (drip loss), capacidade de retenção de água (CRA), capacidade de absorção de água (CAA), perdas de peso por cozimento (PPC) e força de cisalhamento (FC). Houve diferença (p < 0,05) para os valores médios de pH entre os tempos zero (após o resfriamento), 4 e 24 horas que foram de 6,49; 5,78; e 5,65, respectivamente. O resultado médio encontrado para CRA foi de 26,45. Para a cor objetiva, os resultados médios para o L*, a* e b* foram de 52,20; 3,64; 0,51, respectivamente. Portanto, conclui-se que, quando observados os resultados das análises para os parâmetros perda por exsudato, perda de peso por cozimento e capacidade de absorção de água, a carne de peito das matrizes pesadas apresenta ótima qualidade tecnológica apesar de apresentar problemas na sua textura.

Características qualitativas de produtos elaborados com carne de frango pálida e normal

Foram elaborados hambúrgueres e filés empanados com peitos de frango pálidos e normais e foram realizadas as seguintes análises de qualidade: cor, Perda de Peso por Cozimento (PPC), cisalhamento, Encolhimento por Fritura (EF), TBA, avaliação microbiológica e sensorial para os hambúrgueres, e TBA, análise microbiológica e análise sensorial para os filés empanados. As amostras de hambúrgueres elaboradas não diferiram significativamente (p > 0,05) nos parâmetros de coloração, EF, PPC e análise microbiológica e sensorial. Para análise de força de cisalhamento, houve diferença significativa (p < 0,05) entre os hambúrgueres no período de 7, 60 e 120 dias, sendo que os hambúrgueres elaborados com carne pálida (1,92; 1,31 e 1,46, respectivamente) apresentaram as menores médias quando comparados com os de carne normal (2,34; 1,85 e 1,73, respectivamente). Na análise de TBA, as amostras elaboradas com carne pálida também tiveram os maiores resultados com 90 a 180 dias de estocagem (5,28; 7,78; 8,89; 5,02) quando comparadas às de carne normal (2,62; 7,05; 8,08; 3,89). Para os filés empanados, não foram encontradas diferenças significativas (p > 0,05) entre a elaboração com carne de coloração normal e pálida para os parâmetros avaliados. Estes resultados demonstram que a carne pálida pode ser utilizada para a elaboração de produtos industrializados sem causar prejuízos em sua qualidade.

Performance and color of broilers fed diets containing Rhodocyclus gelatinosus biomass

The objective of this study was to evaluate the effect of different supplementation levels of Rhodocyclus gelatinosus biomass on the performance and pigmentation of broilers. Cobb broilers were raised in pens and were fed a sorghum-based diet until 35 days of age. At the 36th day of age, ninety-six birds were randomly distributed to four treatments consisting of experimental diets with different supplementation levels of Rhodocyclus gelatinosus biomass (0, 75, 150 and 300 ppm) added to the finisher basal diet, which were given for seven days. A completely randomized experimental design was used, with four treatments, four replicates and six broilers per parcel. Birds and diets were weighed at the 36th and at the 42nd day of age for performance analysis. There was no significant effect on broiler feed intake. Significant differences in weight gain and feed conversion were seen between the control group and the groups supplemented with 75 and 150 ppm. The treatment with the highest supplementation level and the control group had best weight gain and feed conversion. Color analysis showed that R. gelatinosus biomass supplementation resulted in more yellow breast skin and increased darkening and color purity in breast and thigh meat of broilers, but had no effect on lightness or color purity of breast and thigh skins.

Effect of Chemical Disinfection and Accelerated Aging on Color Stability of Maxillofacial Silicone with Opacifiers

Purpose: The purpose of this study was to evaluate the color stability of MDX4-4210 maxillofacial elastomer with opacifier addition submitted to chemical disinfection and accelerated aging.Materials and Methods: Ninety specimens were obtained from Silastic MDX4-4210 silicone. The specimens were divided into three groups (n = 30): Group I: colorless, Group II: barium sulfate opacifier, Group III: titanium dioxide opacifier. Specimens of each group (n = 10) were disinfected with effervescent tablets, neutral soap, or 4% chlorhexidine gluconate. Disinfection was conducted three times a week for 2 months. Afterward, the specimens were submitted to different periods of accelerated aging. Color evaluation was carried out after 60 days (disinfection period) and after 252, 504, and 1008 hours of accelerated aging, using a reflection spectrophotometer. Color alterations were calculated by the CIE L*a*b* system. Data were analyzed by three-way ANOVA and Tukey test (alpha = 0.05).Results: Group II exhibited the lowest color change, whereas Group III the highest (p < 0.05), regardless of the chemical disinfection and accelerated aging periods.Conclusion: Opacifier addition, chemical disinfection, and accelerated aging procedures affected the color stability of the maxillofacial silicone.

Effect of polymerization and accelerated aging on iris color stability of ocular prosthesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chromatic stability of acrylic resins of artificial eyes submitted to accelerated aging and polishing

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Color Stability Comparison of Silicone Facial Prostheses Following Disinfection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Color stability of maxillofacial silicone with nanoparticle pigment and opacifier submitted to disinfection and artificial aging

The purpose of this study was to evaluate the color stability of a maxillofacial elastomer with the addition of a nanoparticle pigment and/or an opacifier submitted to chemical disinfection and artificial aging. Specimens were divided into four groups (n = 30): group I: silicone without pigment or opacifier, group II: ceramic powder pigment, group III: Barium sulfate (BaSO(4)) opacifier, and group IV: ceramic powder and BaSO(4) opacifier. Specimens of each group (n = 10) were disinfected with effervescent tablets, neutral soap, or 4% chlorhexidine gluconate. Disinfection was done three times a week during two months. Afterward, specimens were submitted to different periods of artificial aging. Color evaluation was initially done, after 60 days (disinfection period) and after 252, 504, and 1008 h of artificial aging with aid of a reflection spectrophotometer. Data were analyzed by three-way ANOVA and Tukey test (alpha = 0.05). The isolated factor disinfection did not statistically influence the values of color stability among groups. The association between pigment and BaSO(4) opacifier (GIV) was more stable in relationship to color change (Delta E). All values of Delta E obtained, independent of the disinfectant and the period of artificial aging, were considered acceptable in agreement with the norms presented in literature. (C) 2011 Society of Photo-Optical Instrumentation Engineers (SPIE). [DOI: 10.1117/1.3625401]

12-Month color stability of enamel, dentine, and enamel-dentine samples after bleaching

The study aimed to quantify the color regression of enamel (E), dentine (D), and combined enamel-dentine (ED) of differently bleached ED specimens over a period of 12 months in vitro. Two ED samples were obtained from the labial surfaces of bovine teeth and prepared to a standardized thickness with the enamel and dentine layer each 1 mm. The ED samples were distributed on four groups (each n=80), in which the different bleaching products were applied on enamel (1, Whitestrips; 2, Illumine 15%; 3, Opalescence Xtra Boost) or dentine surfaces (4, mixture of sodium perborate/distilled water). Eighty ED samples were not bleached (control). Color (L*a*b*) of ED was assessed at baseline, subsequently after bleaching and at 3, 6, and 12 months of storage after bleaching (each 20 samples/group). E and D samples were prepared by removing the dentine or enamel layer of ED samples to allow for separate color analysis. Bleaching resulted in a significant color change (Delta E) of ED specimens. Within the observation period, Delta L but not Delta b declined to baseline. L* values of E and D samples also declined and were not significantly different from control samples after 12 months, while b* values did not decrease to baseline. Generally, no differences between the bleaching agents could be observed. Color change of enamel, dentine, and combined ED of in vitro bleached tooth samples is not stable over time with regard to lightness. However, yellowness did not return to baseline within 1 year.

Color alteration in teeth subjected to different bleaching techniques

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Different Light-Curing Modes on Degree of Conversion, Staining Susceptibility and Stain's Retention Using Different Beverages in a Nanofilled Composite Resin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Color stability of chemically activated reline resin after microwave disinfection: A 1-year clinical trial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)