Study of polymer thermal and mechanical properties using a fiber Bragg grating thermal sensor

A simple and practical method for the study of polymer thermal and mechanical properties using a fiber Bragg grating (FBG) sensor is presented for the first time, in which the FBG is embedded in a typical epoxy polymer. By measuring the sensitivity change of the FBG sensor, changes of the thermal-mechanical properties of the polymer with temperature and pressure can be measured. The experimental results show that this technique is capable of providing continuous in-line monitoring such properties with high sensitivity during transformation between the glassy state and the rubbery state of a polymer within the temperature and pressure range of 20 to 180 C and 0 to 15 MPa. (c) 2007 Society of Photo-Optical Instrumentation Engineers.

Design guidelines and characteristics of beam-shaping microstructure optical fibers

Microstructure optical fibers with flat-top fundamental mode are first proposed by introducing a low-index inner core into the core of index-guiding microstructure optical fibers. The design guidelines and characteristics of beam-shaping microstructure optical fibers are demonstrated. The interrelationships of inner-core index with laser wavelength, air hole diameter and size of inner core are investigated. The influence of the relative size of inner core on the spatial profile of the fundamental mode is demonstrated. Moreover, sensitivity of the flat-top fundamental mode profile from the slight change of the optimum inner-core index value is studied. Starting from these results we deduce that it is possible to fabricate beam-shaping microstructure fibers with nowadays technique. (C) 2005 Elsevier B.V. All rights reserved.

Study of polymer thermal and mechanical properties using a fiber Bragg grating thermal sensor

A simple and practical method for the study of polymer thermal and mechanical properties using a fiber Bragg grating (FBG) sensor is presented for the first time, in which the FBG is embedded in a typical epoxy polymer. By measuring the sensitivity change of the FBG sensor, changes of the thermal-mechanical properties of the polymer with temperature and pressure can be measured. The experimental results show that this technique is capable of providing continuous in-line monitoring such properties with high sensitivity during transformation between the glassy state and the rubbery state of a polymer within the temperature and pressure range of 20 to 180 C and 0 to 15 MPa. (c) 2007 Society of Photo-Optical Instrumentation Engineers.

Numerical analysis and comparison of three metal-oxide-type super-resolution near field structures

Based on the Fresnel-Kirchkoff diffraction theory, we build up a Gaussian diffraction model of metal-oxide-type super-resolution near field structure (super-RENS), which can describe far field optical properties. The spectral contrast induced by refractive index and the structural changes in AgOx, PtOx and PdOx thin films, which are the key functional layers in super-RENS, are studied by using this model. Comparison results indicate that the spectral contrast intensively on laser-induced distribution and change of the refractive index in the metal-oxide films. The readout mechanism of the metal-oxide-type super-RENS optical disc is further clarified. This Gaussian diffraction model can be used as a simple and effective method for choosing proper active materials in super-RENS.

A feasible approach to optical-electrical hybrid data storage using phase change material

We present our experimental results supporting optical-electrical hybrid data storage by optical recording and electrical reading using Ge2Sb2Te5as recording medium. The sheet resistance of laser- irradiated Ge2Sb2Te5. lms exhibits an abrupt change of four orders of magnitude ( from 10 7 to 10 3./ sq) with increasing laser power, current- voltage curves of the amorphous area and the laser- crystallized dots, measured by a conductive atomic force microscope ( C- AFM), show that their resistivities are 2.725 and 3.375 x 10- 3., respectively, the surface current distribution in the. lms also shows high and low resistance states. All these results suggest that the laser- recorded bit can be read electrically by measuring the change of electrical resistivity, thus making optical electrical hybrid data storage possible.

Influence of synthetic method on the properties of La0.5Ba0.5FeO3 SOFC cathode

Power Point presentado en The Energy and Materials Research Conference - EMR2015 celebrado en Madrid (España) entre el 25-27 de febrero de 2015

Effect of F- ions on emission cross-section and fluorescence lifetime of Yb3+-doped tellurite glasses

The effects of F- ions in Yb3+-doped tellurite glass systems on the emission cross-section and measured fluorescence lifetime are investigated. The results show that both the emission cross-section and the fluorescence lifetime of Yb3+ ions increase from 1.32 to 1.39 pm(2) and from 0.93 to 1.12 ms respectively with the increase of F- ions from 0 to 10 mol% and that such oxyfluoride tellurite glass system is a promising laser host matrix for high power generation. FT-IR spectra were used to analyze the effect of F- ions on the structure of tellurite glasses and the change of OH- groups in this glass system. Analysis demonstrates that the addition of fluoride decreases the symmetry of the structure of tellurite glasses resulting in increasing of the emission cross-section and removes the OH- groups resulting in increasing of the measured fluorescence lifetime of Yb3+ ions. (c) 2005 Elsevier B.V. All rights reserved.

Effect of PbCl2 addition on structure, OH- content, and upconversion luminescence in Yb3+/Er3+-codoped germanate glasses

Yb3+/ Er3+-codoped oxychloride germanate glasses have been synthesized by a conventional melting and quenching method. Structural properties were obtained based on Raman-spectra investigation, indicating that PbCl2 plays an important role in the formation of the glass network and has an important influence on the phonon density and the maximum phonon energy. The Judd - Ofelt intensity parameters and quantum efficiencies were calculated based on the Judd - Ofelt theory and lifetime measurements. The enhanced upconversion luminescence intensity of Er3+ with increasing PbCl2 content could not be explained only by the maximum phonon-energy change of the host glasses. For the first time, the effect of PbCl2 addition on phonon density, OH- content, and upconversion luminescence in oxychloride glasses has been discussed and evaluated. The results show that the effect of phonon density and OH- content on upconversion luminescence in oxychloride glasses is much stronger than that of the decrease of the maximum phonon energy. The possible upconversion luminescence mechanisms have also been estimated and are discussed.

Investigation of the effect of fluoride ions introduction on structural, OH- content and up-conversion luminescence properties in Er3+-doped heavy metal oxide glasses

Effect of fluoride ions introduction on structural, OH- content and up-conversion luminescence properties in Er3+-doped heavy metal oxide glasses have been investigated. Structure was investigated, indicating that fluoride has an important influence on the phonon density, maximum phonon energy of host glasses. With increasing fluoride content, the up-conversion luminescence intensity and quantum efficiencies increase notably, which could not be explained only by the maximum phonon energy change of host glasses. Our results show that, with the introduction of PbF2, the decrease of phonon density and OH- content contributes more to the enhanced up-conversion emissions than that of maximum phonon energy. (c) 2005 Elsevier B.V. All rights reserved.

Effect of hydroxyl groups on nonradiative decay of Er3+: I-4(13/2)-> I-4(15/2) transition in zinc tellurite glasses

A series of zinc tellurite glasses of 75TeO(2)-20ZnO-(5-x)La2O3-xEr(2)O(3) (x=0.02, 0.05, and 0.1 mol%) with the different hydroxl groups were prepared by the conventional melt-quenching method. Infrared spectra were measured in order to estimate the exact content of OH- groups in samples. The observed increase of the fluorescence lifetime with the oxygen bubbling time has been related to the reduction in the OH- content concentration as evidenced by IR transmission spectra. Various nonradiative decay rates from I-4(13/2) of Er3+ with. the change of OH content were determined from the fluorescence lifetime and radiative decay rates were calculated on the basis of Judd-Ofelt theory. (c) 2005 Elsevier B.V. All rights reserved.

Planificación técnica de compartición de infraestructuras para servicios de difusión y telefonía móvil en el municipio de Mañaria.

[EU]Mañariako udaletxeak herritarren eskaera bat erantzun nahi du, eskaera hori herriko transmisio zentruaren kokapena aldatzean datza. Auzokideek leku urrunago batean kokatzea eskatzen dute. Eskaria erantzuteko, Udaletxeak ikasketa erradioelektrikoa herrian egitea eskatu du, transmisio zentruari kokapen berri bat bilatzeko. Helburua estaldura eta kalitate berdina mantentzea izango da bai telefonia eta telebista zerbitzuetarako. Udaletxeak kokagune batzuk erraztu ditu, non elektrizitate hornikuntza eta sarbidea duten kokapenak. Ikerketa erradioelektrikoa kokapen horietatik hasiko da baina kalitate eta estaldura baldintzak betetzen ez badira, beste leku bat aurkitu beharko da. Proiektu honen amaiera kokapen berri bat aurkituko da non Udaletxeak ezarritako baldintzak betetzen diren.

Precise determination of anomalous scattering factors of Ge by using X-ray resonant scattering

Variations of peak position of the rocking curve in the Bragg case are measured from a Ge thin crystal near the K-absorption edge. The variations are caused by a phase change of the real part of the atomic scattering factor. Based on the measurement, the values of the real part are determined with an accuracy of better than 1%. The values are the most reliable ones among those reported values so far as they are directly determined from the normal atomic scattering factors.

Professores especiais para alunos especiais: uma experiência de grupo operativo na capacitação de professores

O objetivo desta pesquisa foi estudar a contribuição que a interação vivenciada em grupos operativos pode oferecer ao desenvolvimento da capacidade de aprendizagem no amplo processo de capacitação docente, numa perspectiva psicopedagógica. Buscou-se perceber como a técnica dos grupos operativos contribuiria para a modificação da pratica pedagógica desenvolvida por professores de aceleração de aprendizagem no sentido de otimizar os resultados do trabalho por eles desenvolvidos junto aos alunos dessas classes.Foram acompanhados, em dinâmica de grupo operativo, vinte docentes de classes de aceleração incluídos em um projeto de capacitação para professores desenvolvido em Mangaratiba, RJ. A tarefa explicita nesse grupo foi a elaboração de temas sobre a aprendizagem dos alunos e dos professores, considerando a auto-estima acadêmica de ambos.A base teórica adotada foi a Epistemologia Convergente, na qual Jorge Visca propõe um modelo específico de intervenção psicopedagógica. Neste modelo, a perspectiva relacional está fundada nas contribuições da psicologia social, conforme é compreendida por Pichon-Riviére. Aí, a técnica dos grupos operativos é utilizada para favorecer o desenvolvimento relacional do grupo participante, otimizando suas possibilidades de aprender. Realizou-se então, uma intervenção psicopedagógica para a capacitação de docentes de classe de aceleração de aprendizagem e um dos instrumentos dessa intervenção foi a vivencia em grupo operativo. A pesquisa acompanhou o desenvolvimento desse grupo observando e interagindo para que se produzissem os movimentos que contribuíram para mobilizar a resignificação do modelo de aprendizagem dos seus membros.Essa resignificação possibilitou ao professor considerar a capacidade para aprender em grupo fator de grande importância na tarefa docente, aspecto considerado original na capacitação realizada. Os resultados qualitativos observados tornaram-se explícitos ao longo da vivencia grupal na significativa mudança da relação do grupo com a produção de conhecimento e da auto-estima profissional dos participantes. A pesquisa concluiu que os processos de capacitação docente devem continuar buscando alternativas mais coerentes com os aspectos que se deseja formar nos professores e apresenta os grupos operativos como estratégia psicopedagógica de excelentes possibilidades na capacitação dos mesmos.Enfatiza ainda, a possibilidade de reconstrução do sentido e pratica da cidadania na dinâmica desses grupos já que neles, os sujeitos encontram oportunidades de redefinição dos papeis que desempenham, pelo exercício da flexibilização dos mesmos. Confirma a certeza de que o professor que poderá ensinar a construir conhecimento deverá, ele mesmo, ter construído o seu como a condição para que possa ajudar o aluno a superar as inúmeras dificuldades inerentes à aprendizagem presentes nas estruturas sociais, nos sistemas escolares e em sua própria historia pessoal. É nessa superação que alunos e professores já marcados pelas vivências de fracasso escolar poderão retomar no grupo social a construção de sua condição cidadã, justificando o empenho realizado pela educação escolar.

The significance of scale patterns and scale readings in the life history and habits of the salmon

This brief reports highlights the significance of scale readings of salmon. The reasons for colour change of scales and scale rings are briefly explained. Scale readings of salmon fry from the River Lune in the north west of England are presented. The salmon was captured in 1957/58.

Surface morphology and properties of zirconia thin films prepared at different deposition rates

ZrO2 thin films were prepared on BK7 glass substrates by electron beam evaporation deposition method. The influence of deposition rate varying from 1.2 to 6.3 nm s(-1) on surface morphology and other properties of ZrO2 films were examined. With increasing deposition rate, the surface defect density increased. The decrease in half width at full maximum in X-ray diffraction pattern with deposition rate indicates an increase in crystal dimension with increasing deposition rate. Electron beam deposited ZrO2 films are known to be inhomogeneous. From the change of the peak transmittance value, it can be deduced that the inhomogeneity of ZrO2 films strengthened gradually with increasing deposition rate. The type of surface defects changed from nodules to craters when the deposition rate was high enough.