Electrochemical Characterisation of Filter Media Properties and Their Exploitation in Enhanced Filtration

Streaming potential measurements for the surface charge characterisation of different filter media types and materials were used. The equipment was developed further so that measurements could be taken along the surfaces, and so that tubular membranes could also be measured. The streaming potential proved to be a very useful tool in the charge analysis of both clean and fouled filter media. Adsorption and fouling could be studied, as could flux, as functions of time. A module to determine the membrane potential was also constructed. The results collected from the experiments conducted with these devices were used in the study of the theory of streaming potential as an electrokinetic phenomenon. Several correction factors, which are derived to take into account the surface conductance and the electrokinetic flow in very narrow capillaries, were tested in practice. The surface materials were studied using FTIR and the results compared with those from the streaming potentials. FTIR analysis was also found to be a useful tool in the characterisation of filters, as well as in the fouling studies. Upon examination of the recorded spectra from different depths in a sample it was possible to determine the adsorption sites. The influence of an external electric field on the cross flow microflltration of a binary protein system was investigated using a membrane electroflltration apparatus. The results showed that a significant improvement could be achieved in membrane filtration by using the measured electrochemical properties to help adjust the process conditions.

Computational Techniques for Spectral Image Analysis

Multispectral images are becoming more common in the field of remote sensing, computer vision, and industrial applications. Due to the high accuracy of the multispectral information, it can be used as an important quality factor in the inspection of industrial products. Recently, the development on multispectral imaging systems and the computational analysis on the multispectral images have been the focus of a growing interest. In this thesis, three areas of multispectral image analysis are considered. First, a method for analyzing multispectral textured images was developed. The method is based on a spectral cooccurrence matrix, which contains information of the joint distribution of spectral classes in a spectral domain. Next, a procedure for estimating the illumination spectrum of the color images was developed. Proposed method can be used, for example, in color constancy, color correction, and in the content based search from color image databases. Finally, color filters for the optical pattern recognition were designed, and a prototype of a spectral vision system was constructed. The spectral vision system can be used to acquire a low dimensional component image set for the two dimensional spectral image reconstruction. The data obtained by the spectral vision system is small and therefore convenient for storing and transmitting a spectral image.

Private micro-irrigation costs using reclaimed water

The cost of reusing water in micro-irrigation at the field level has not been studied in depth although the use of effluents in agriculture is a viable alternative in areas where water is scarce or there is intense competition for its use. The aim of the present study is to analyse the private costs of water reuse in micro-irrigation in an experimental plot. This analysis is intended to provide information about the decision a farmer would make when the choice to use conventional or reclaimed water is guided by cost criteria. The components of the total costs of different combinations of four types of filters and five emitters that can be installed in micro-irrigation systems using reclaimed water have been studied with the data obtained from an experimental plot in conditions similar to those of fruit orchards. Different scenarios that compared the costs of using conventional or reclaimed water in terms of water price and nutrient content were also studied. The results show that a proper combination of filters and emitters can save up to 33% in irrigation costs. Capital costs and maintenance costs were the most variable among the different combinations. Scenario analysis showed that the greater price of reclaimed water could be compensated by high nutrient contents, which would reduce fertilizer costs

Monitoramento atmosférico passivo de SO2, NO2 e O3 em áreas urbanas e de influência industrial como prática de química ambiental para alunos de graduação

This study is a result of undergraduate student participation in the Environmental Chemistry discipline provided by the Chemistry Institute/UFBA. The students were involved in the development of passive samplers, a project of the LAQUAM (Environmental Analytical Chemistry Laboratory). The students' residences and other neighborhoods were used to create a passive sampling network, allowing the measurement of atmospheric levels of pollutants in urban areas and in those under industrial influence. The assembly of the passive samplers, including impregnation of filters and chemical analysis were part of the students' practice tasks. The results were analyzed taking into consideration the Brazilian legislation.

Estudo da labilidade de Cu(II), Cd(II), Mn(II) e Ni(II) em substâncias húmicas aquáticas utilizando-se membranas celulósicas organomodificadas

In this work commercial filters papers were organomodified with tetraethylorthosilicate (TEOS) and 3-aminopropyltriethoxysilane (3-APTS), aiming at the development of a new analytical procedure for in-situ speciation of labile and inert metal species in aquatic systems. Parameters that exert influence on the metal lability such as pH, chelating time, concentration and characteristics of the organic matter were studied in the laboratory using tests for metal recuperation. The results showed slower kinetics for Cu ion than for Ni, Mn and Cd in the absence of aquatic humic substances (AHS). The relative lability observed for complexed metals in aquatic humic substances using organomodified filter papers was Cu>>Cd>Ni>Mn. The pH values, structural characteristics and concentration of AHS exert strong influence on the lability of the metals. The results obtained showed that the utilization of organomodified filter papers can be an interesting and promising alternative for in situ characterization of metal lability in aquatic systems.

Protetores solares

Health problems related to UV radiation can be minimized by the appropriate use of sunscreens. Different kinds of sunscreens are reported in the literature, even though there is a misleading denomination among them and few discussions are presented about how they work. This paper describes some important aspects in order to understand sunscreen phenomena such as: solar radiation effect, type of solar filters, protection mechanism, formulations and solar protection factor (SPF). Moreover the importance of Chemistry and the interdisciplinary studies related to sunscreens and cosmetic researches are emphasized.

Hybrid LC Filter for Power Electronic Drives: Theory and Implementation

Power electronic converter drives use, for the sake of high efficiency, pulse-width modulation that results in sequences of high-voltage high-frequency steep-edged pulses. Such a signal contains a set of high harmonics not required for control purposes. Harmonics cause reflections in the cable between the motor and the inverter leading to faster winding insulation ageing. Bearing failures and problems with electromagnetic compatibility may also result. Electrical du/dt filters provide an effective solution to problems caused by pulse-width modulation, thereby increasing the performance and service life of the electrical machines. It is shown that RLC filters effectively decrease the reflection phenomena in the cable. Improved (simple, but effective) solutions are found for both differential- and common-mode signals; these solutions use a galvanic connection between the RLC filter star point and the converter DC link. Foil chokes and film capacitors are among the most widely used components in high-power applications. In actual applications they can be placed in different parts of the cabinet. This fact complicates the arrangement of the cabinet and decreases the reliability of the system. In addition, the inductances of connection wires may prevent filtration at high frequencies. This thesis introduces a new hybrid LC filter that uses a natural capacitance between the turns of the foil choke based on integration of an auxiliary layer into it. The main idea of the hybrid LC filter results from the fact that both the foil choke and the film capacitors have the same roll structure. Moreover, the capacitance between the turns (“intra capacitance”) of the foil inductors is the reason for the deterioration of their properties at high frequencies. It is shown that the proposed filter has a natural cancellation of the intra capacitance. A hybrid LC filter may contain two or more foil layers isolated from each other and coiled on a core. The core material can be iron or even air as in the filter considered in this work. One of the foils, called the main foil, can be placed between the inverter and the motor cable. Other ones, called auxiliary foils, may be connected in star to create differential-mode noise paths, and then coupled to the DC link midpoint to guarantee a traveling path, especially for the common-mode currents. This way, there is a remarkable capacitance between the main foil and the auxiliary foil. Investigations showed that such a system can be described by a simple equivalent LC filter in a wide range of frequencies. Because of its simple hybrid construction, the proposed LC filter can be a cost-effective and competitive solution for modern power drives. In the thesis, the application field of the proposed filter is considered and determined. The basics of hybrid LC filter design are developed further. High-frequency behaviour of the proposed filter is analysed by simulations. Finally, the thesis presents experimental data proving that the hybrid LC filter can be used for du/dt of PWM pulses and reduction of common-mode currents.

Estudi per a la construcció de l'EDAR mitjançant filtres verds de la Nou de Gaià (Tarragonès)

El tractament de les aigües en nuclis menors de 2000 habitants es troba pendent de completar per part de l’Agència Catalana de l’Aigua més concretament al corresponent Pla de Sanejament d’Aigües Residuals Urbanes (PSARU). El nucli de La Nou de Gaià (al Tarragonès) es troba pendent de la construcció de la corresponent instal·lació de sanejament, projectada al 2007. Alternativament a les depuradores tradicionals basades en l’ús de formigó (o materials alternatius) i en la despesa elèctrica per assegurar una aeració i una evacuació dels fangs generats, existeixen tecnologies “toves”. Aquestes tecnologies, també conegudes com a “verdes”, es basen en imitar els sistemes naturals maximitzant el seu potencial d’autodepuració. A grans trets existeixen dos formes de depurar les aigües de forma ecològica”: llacunatges (existeix una capa d’aigua lliure) i filtres verds. El present estudi es basa en l’aplicació de filtres verds de morfologia vertical i flux subsuperficial, plantat amb canyes dels generes Scirpus o Phragmites. El resultat han estat 4 bases de 35*35 per a tractar un cabal de 150 m3/d i una població equivalent de 1272.

Efeito de substâncias empregadas para remoção de cobre sobre o teor de compostos secundários da cachaça

High copper content is of great concern among producers of sugar-cane spirits who frequently use filters instead of cleaning the stills. This study compared the efficiency of activated carbon, ion-exchange-polymeric resin, and activated-carbon/iron-oxide magnetic composite for copper reduction without removing excessive organic compounds that are important for the beverage's quality. Resin was the most efficient copper adsorbent, removing fewer organic compounds. The composite also removed copper; however, it also removed large amounts of organic compounds. Activated carbon didn't remove sufficient copper to reduce its concentration to less than 5 g L-1, and it removed large amounts of higher alcohols and esters.

Influência das características das substâncias húmicas aquáticas na eficiência da coagulação com o cloreto férrico

The aim of this study was to verify the influence of the apparent molecular size of aquatic humic substances on the effectiveness of coagulation with ferric chloride. Coagulation-filtration tests using jar test and bench-scale sand filters were carried out on samples of water with true color of approximately 100 Hazen units, prepared with aquatic humic substances of different molecular sizes (F1: < 0.45 µm, F2: 100 kDa - 0.45 µm, F3: 30 - 100 kDa and F4': < 30 kDa). For the water samples with lower apparent molecular size fractions, greater dosages of coagulant was needed to remove the color around 5.0 Hanzen units, mainly because these water samples contain higher concentrations of fulvic acids, which exhibited a larger number of negatively-charged groups.

Conversioni al cattolicesimo a Roma tra Sei e Settecento. La presenza degli scandinavi nell’Ospizio dei Convertendi.

In my PhD dissertation, I have examined a group of people of Scandinavian origin received by Ospizio dei Convertendi. This group has been hitherto largely unknown to historical research. The Ospizio was an institute founded by the Oratorian Congregation in Rome in 1673 to provide religious instruction and material aid to both recent and aspirant converts to Roman Catholicism. My research traces the profile of converts and a typology of motives, examining different factors which influenced the conversion process. I show that the key factors were often of a social rather than a religious nature. Moreover, I have analyzed the hospice in the context of Counter-Reformation charity as well. In terms of numbers, the Scandinavians formed a somewhat marginal yet not insignificant group within the Roman hospice. Out of a total of 2203 guests received between 1673 and 1706, 4.6 % were Scandinavians: 74 Swedes (including Finland and Livonia) and 27 Danes (including Norway). They came from a rigorously Protestant region which reacted to Catholicism with severe legislative measures. Converts to Catholicism risked confiscation of their goods, expulsion or even capital punishment. Since both Sweden and Denmark were practically impenetrable to Catholicism at the time and clandestine missionary attempts often failed before they had even properly started, the Roman Catholic Church shifted its interest towards Northerners arriving in Rome, a preferred destination for young noblemen, artists and migrant craftsmen. The material related to Ospizio dei Convertendi, conserved in the Vatican archives, is a scarcely known yet unusually rich source, not only for the religious history of our continent, but also for social history and the study of migration in early modern Europe. It contains a wealth of information about members of the subordinate classes, of their travels and lives in Europe. The profile delineated in these documents is of individuals who had a wide range of different professions and different aspirations. These documents encompass a vast social spectrum that was highly mobile on a continent which by that time had become pluriconfessional. Therefore, these migrants faced the complex religious reality in their everyday life. The principal corpus of my research consists of two types of manuscript sources created for administrative and in a way also for apologetic purposes of the Roman Catholic Church. My starting point is the Primo registro generale of Ospizio dei Convertendi. This is a volume in which the following information about each guest was registered: name, nationality, city of origin, age, sex, profession, confession professed before converting, date of arrival, departure, abjuration and baptism. Typically, the convert was male, originating from Stockholm or Copenhagen, from 21 to 30 years of age. The biggest occupational groups in descending order were soldiers, noblemen, craftsmen and sailors. Thus the data reflects a multiform reality of interurban and long distance migration, ideals regarding the education of young noblemen and gentry as well as the need of European armies to hire foreign mercenaries in their various campaigns. Against this background the almost total absence of women is hardly surprising: there is only one woman in the material I have studied. The second main source, Nota degl’ospiti ricevuti e spese fatte per essi, sheds more light on the choices of the converts, their motivations and their lives outside Scandinavia before reaching Rome. This narrative material permits an analysis which completes but also goes far beyond the columns of the Institute’s general register. This material consists of reports written by Catholic priests based on an interview conducted upon each guest’s arrival. The material frequently includes information on what the converts would do following their departure from the Institute as well. These sources have a specific narrative form and contain short biographies, list reasons for converting and information about the journey from the North to the Mediterranean - a journey which in many cases took several years. Moreover, they show that certain unorthodox practices such as calling on the saints and pleading for help from them were not uncommon in the Protestant popular religion. The recording of information on conversions from Protestantism to Catholicism reflects both religious and social interest on the part of the receiving institute. The information obtained was used for the purposes of religious teaching, for finding adequate ways of inserting the convert into Italian society so that he could earn a living, and to find effective methods to convert others with a similar cultural and geographical background. The stories recorded were based on interviews with the newly-arrived, information obtained from a travel companion or fellow countrymen, or from written documents the aspirant converts carried with them. These sources illustrate, although sometimes in rather simplified ways, the circumstances and motivations which were relevant to the choice of changing one’s confession. In addition, I have examined petitions addressed to the hospice and other Roman authorities in order to get financial aid. These petitions were written by Italian scrittori, and they contain certain conventions and topoi of presenting the conversion with the purpose of improving the chances of obtaining financial aid. It is through these filters, which may seem initially almost invisible, that the remote voice of the converts reaches us. The results of the analysis are particularly interesting because they disagree with some of the principal conclusions of previous work on the subject. First, earlier research has focused almost exclusively on the conversions of noblemen, and has argued, second, that the Queen Christina of Sweden was the driving force behind their change of confession. The sources examined for this dissertation present a profile of long-distance migrants, many of them members of the subordinate classes, who were looking for ways to make their living in Europe. These people had in many cases left their country of origin several years earlier and not for religious reasons, so, crucially, we are not dealing with confessional migration in these cases. Rather, conversion was a complex process, intricately tied up with strategies of survival, integration and upward social mobility. At the same time, while these components are significant on their own right, they do not necessarily point to the absence of motivations of a more clearly religious nature.

Materiais híbridos orgânico-inorgânicos (ormosil) obtidos por sol-gel com potencial uso como filtro solar

This work aimed at the synthesis and characterization of particles of modified silica containing the organic filter dibenzoylmethane (DBM) by the hydrolytic sol-gel method, with modifications to the Stöber route. The structures of the resulting Xerogels were characterized by diffuse reflectance UV-VIS spectroscopy in the solid state, infrared absorption spectroscopy, Scanning Electron Microscopy (SEM) and 29Si Nuclear Magnetic Resonance (29Si NRM). The results showed favorable formation of hybrid organic-inorganic nanoparticles with efficient absorption/reflectance of radiation in the UV / VIS range, which enables their potential use as sunscreen.

Produção e caracterização de espumas cerâmicas obtidas a partir de lodo de anodização de alumínio

Ceramic foams were produced from a sludge generated in the aluminum anodizing process by using an industrial polyurethane foam (replication method) with open cell sizes of 10 ± 5 ppi (porosity = 97%) which were impregnated with suspensions containing 50-61 wt.% alumina, 1 wt.% citric acid, 6 wt.% bentonite and fired at 1600 ºC for 2 h. The aluminum anodizing sludge shows a high alumina content (87.5 wt.%) and a low particle size (~1.7 mm) after calcination and milling. The obtained filters show porosity of approximately 70%, filtration capability (mass water flow) of 1.7 kg/s and mechanical strength under compression of 2.40 MPa.

Considerações sobre o preparo de amostras contendo micropoluentes estrogênicos

In this work, the materials used in the recovery of estrogens from aqueous matrices by filtration and solid phase extraction were evaluated. The results showed that glass-fiber filters allow a recovery and repeatability compatible with this type of analysis, whereas cellulose esters lead to significant losses of the analytes, mainly due to adsorption processes. On the other hand, the transferring of the sample to the extraction cartridges should be carried out with glass or Teflon tubing, since the adsorption observed with other polymeric materials (eg. silicone, Tygon, polyethylene and PVC) dramatically reduces the recovery and repeatability of the extraction process.

Filtros digitais por transformadas de Fourier aplicados em eletroquímica

The electrochemical properties of micro and nano-electrodes are widely investigated due to their low faradaic and capacitive currents, leading to a new generation of smart and implantable devices. However, the current signals obtained in low-dimensional devices are strongly influenced by noise sources. In this paper, we show the evaluation of filters based on Fast Fourier Transform (FFT) and their implementation in a graphical user interface (GUI) in MATLAB®. As a case study, we evaluated an electrochemical reaction process of charge transfer via outer-sphere. Results showed successful removal of most of the noise in signals, thus proving a promising tool for low-scale measurement.