AFRICA BUILD Portal: developing a social network of African health researchers and educators

One of the main outputs of the project is a collaborative platform which integrates a myriad of research and learning resources. This article presents the first prototype of this platform: the AFRICA BUILD Portal (ABP 1.0). The ABP is a Web 2.0 platform which facilitates the access, in a collaborative manner, to these resources. Through a usable web interface, the ABP has been designed to avoid, as much as possible, the connectivity problems of African institutions. In this paper, we suggest that the access to complex systems does not imply slow response rates, and that their development model guides the project to a natural technological transfer, adaptation and user acceptance. Finally, this platform aims to motivate research attitudes during the learning process and stimulate user?s collaborations.

Tutorial 2.0 on Technical Drawing 3D and Visualization

In recent years, the continuous incorporation of new technologies in the learning process has been an important factor in the educational process [1]. The Technical University of Madrid (UPM) promotes educational innovation processes and develops projects related to the improvement of the education quality. The experience that we present fits into the Educational Innovation Project (EIP) of the E.U. of Agricultural Engineering of Madrid. One of the main objectives of the EIP is to "Take advantage of the new opportunities offered by the Learning and Knowledge Technologies in order to enrich the educational processes and teaching management" [2].

A 0.0016 mm(2) 0.64 nJ leakage-based CMOS temperature sensor

This paper presents a CMOS temperature sensor based on the thermal dependencies of the leakage currents targeting the 65 nm node. To compensate for the effect of process fluctuations, the proposed sensor realizes the ratio of two measures of the time it takes a capacitor to discharge through a transistor in the subthreshold regime. Furthermore, a novel charging mechanism for the capacitor is proposed to further increase the robustness against fabrication variability. The sensor, including digitization and interfacing, occupies 0.0016 mm2 and has an energy consumption of 47.7–633 pJ per sample. The resolution of the sensor is 0.28 °C, and the 3σ inaccuracy over the range 40–110 °C is 1.17 °C.

Tutorial 2.0 on Technical Drawing 3D and Visualization

In recent years, the continuous incorporation of new technologies in the learning process has been an important factor in the educational process (1). The Technical University of Madrid (UPM) promotes educational innovation processes and develops projects related to the improvement of the education quality. The experience that we present fits into the Educational Innovation Project (EIP) of the E.U. of Agricultural Engineering of Madrid. One of the main objectives of the EIP is to Take advantage of the new opportunities offered by the Learning and Knowledge Technologies in order to enrich the educational processes and teaching management (2).

El nuevo reto de relación con los clientes: Social CRM

La evolución de Internet al modelo Web 2.0, ha creado el nuevo sistema denominado Social Media, donde han proliferado un número ingente de redes sociales, que han cambiado las formas de relación y colaboración entre los usuarios, así como la relaciones de éstos y las empresas. En respuesta a estos dramáticos cambios sociales y tecnológicos, que actualmente están dando forma a las relaciones negocio-empresa, las empresas están descubriendo que es necesario modificar la estrategia de utilización del CRM (Customer Relationship Management) con sus clientes y desarrollar nuevas capacidades que permitan la creación de valor con los clientes. Y es aquí donde aparece el concepto de Social CRM, entendido como una estrategia centrada en entender, anticiparse y responder mejor a las necesidades de los clientes existentes o potenciales, aprovechando los datos sociales, para crear unas fuertes relaciones beneficiosas para ambas partes. En este trabajo se describe un modelo de adopción de Social CRM, aplicando un método de análisis “Top-Down”, y basado en el modelo de Gartner denominado “The Eight Building Blocks of CRM” [1]. El presente trabajo descompone el modelo de adopción descrito por Gartner, en los siguientes puntos. - Una decisión estratégica de la compañía - Asomarse a la realidad social - Analizar las redes sociales. - Metodología de adopción. - Despliegue y extensión en todos los departamentos de la compañía y la adaptación de los recursos humanos. - Selección e integración con las plataformas tradicionales de CRM - Análisis de herramientas de monitorización de Social CRM El modelo propuesto tiene dos objetivos, por un lado pretende proporcionar la visión de cómo CRM puede influir en los resultados empresariales en la era del cliente social, y por otro, proporcionar a los administradores cómo las inversiones y los recursos existentes de CRM puede ser integrados con las nuevas tecnologías y procesos para formar capacidades que pueden mejorar el rendimiento del negocio. ABSTRACT. “The Internet evolution to Web 2.0 model has created a new system called Social Media, where have proliferated a huge number of social networks which have changed the relationship and collaboration forms user-to-user and user-to-company. In response to these dramatic social and technological changes that are currently shaping the business-business relationships, companies are finding it necessary to modify the strategy for use of CRM (Customer Relationship Management) with customers and develop new capabilities to creating value with customers. And here is where the concept of Social CRM appears, understood as a focus on understanding, anticipating and responding to the needs of existing and potential customers strategy, leveraging social data to create a strong mutually beneficial relationships. In this paper describes an adoption model of Social CRM, using a "Top-Down" analysis method and based on the model of Gartner called "The Eight Building Blocks of CRM" [1]. This paper decomposes the adoption model described by Gartner in the following points. - A company strategic decision. - Look at social reality. - Analyze social networks. - Methodology adoption. - Deployment and extension in all departments of the company and the adaptation of human resources. - Selection and integration with traditional CRM platforms. - Analysis of monitoring tools for Social CRM. The proposed model has two objectives, firstly aims to provide insight into how CRM can influence business outcomes in the era of the social customer, and secondly, to provide administrators how investments and existing resources can be integrated CRM with new technologies and processes for developing capabilities that can increase business performance”.

UML 1.4 versus UML 2.0 as Languages to Describe Software Architectures.

ML 1.4 is widely accepted as the standard for representing the various software artifacts generated by a development process. For this reason, there have been attempts to use this language to represent the software architec- ture of systems as well. Unfortunately, these attempts have ended in representa- tions (boxes and lines) already criticized by the software architecture commu- nity. Recently, OMG has published a draft that will constitute the future UML 2.0 specification. In this paper we compare the capacities of UML 1.4 and UML 2.0 to describe software architectures. In particular, we study extensions of both UML versions to describe the static view of the C3 architectural style (a simplification of the C2 style). One of the results of this study is the difficulties found when using the UML 2.0 metamodel to describe the concept of connector in a software architecture.

Validation of the burn-up code EVOLCODE 2.0 with PWR experimental data and with a Sensitivity/Uncertainty analysis

A validation of the burn-up simulation system EVOLCODE 2.0 is presented here, involving the experimental measurement of U and Pu isotopes and some fission fragments production ratios after a burn-up of around 30 GWd/tU in a Pressurized Light Water Reactor (PWR). This work provides an in-depth analysis of the validation results, including the possible sources of the uncertainties. An uncertainty analysis based on the sensitivity methodology has been also performed, providing the uncertainties in the isotopic content propagated from the cross sections uncertainties. An improvement of the classical Sensitivity/ Uncertainty (S/U) model has been developed to take into account the implicit dependence of the neutron flux normalization, that is, the effect of the constant power of the reactor. The improved S/U methodology, neglected in this kind of studies, has proven to be an important contribution to the explanation of some simulation-experiment discrepancies for which, in general, the cross section uncertainties are, for the most relevant actinides, an important contributor to the simulation uncertainties, of the same order of magnitude and sometimes even larger than the experimental uncertainties and the experiment- simulation differences. Additionally, some hints for the improvement of the JEFF3.1.1 fission yield library and for the correction of some errata in the experimental data are presented.

Marco de caracterización y cálculo de las métricas de calidad de los componentes web para el desarrollo de aplicaciones de usuario final

En la Web 2.0, donde usuarios finales sin grandes conocimientos de programación pueden interactuar y crear aplicaciones web utilizando componentes publicados en Internet, ofrecidos por una gran variedad de proveedores de servicio. La selección de estos componentes requiere de un análisis exhaustivo por parte de los usuarios sobre las propiedades de estos componentes en referencia a su calidad. En este proyecto, se presentan dos modelos de calidad según una estructura jerárquica, uno para componentes web como elementos autónomos y otro para componentes utilizados en aplicaciones de mashup, basado en un análisis de la emergente Web 2.0. Además, se define una herramienta de medición y anotación de calidad para los distintos niveles de los modelos. Estas herramientas pretenden ser un útil instrumento para los desarrolladores y usuarios de componentes y mashups.---ABSTRACT---In the Web 2.0, where end users without a technical programming background can interact and develop web applications leveraging web components published on the Internet, offered by a great diversity of service providers. This component selection requires an exhaustive analysis by these end users based on the requirements of these components related to their quality. In this work, two quality models are presented according to a hierarchical structure, one for web components as independent elements and another one for web components as parts of web mashup applications, based on an analysis of the emerging Web 2.0. In addition, a measuring and write down quality framework is defined to weigh the quality of all the levels of the models. These tools intend to provide a useful instrument to components and mashup developers and end users.

Linked Data Rights 2.0: extension of ODRL for Licensing Linked Data

Linked Data assets (RDF triples, graphs, datasets, mappings...) can be object of protection by the intellectual property law, the database law or its access or publication be restricted by other legal reasons (personal data pro- tection, security reasons, etc.). Publishing a rights expression along with the digital asset, allows the rightsholder waiving some or all of the IP and database rights (leaving the work in the public domain), permitting some operations if certain conditions are satisfied (like giving attribution to the author) or simply reminding the audience that some rights are reserved.

Diseño y desarrollo del backend para la explotación de componentes web empleando Google App Engine

La web vive un proceso de cambio constante, basado en una interacción mayor del usuario. A partir de la actual corriente de paradigmas y tecnologías asociadas a la web 2.0, han surgido una serie de estándares de gran utilidad, que cubre la necesidad de los desarrollos actuales de la red. Entre estos se incluyen los componentes web, etiquetas HTML definidas por el usuario que cubren una función concreta dentro de una página. Existe una necesidad de medir la calidad de dichos desarrollos, para discernir si el concepto de componente web supone un cambio revolucionario en el desarrollo de la web 2.0. Para ello, es necesario realizar una explotación de componentes web, considerada como la medición de calidad basada en métricas y definición de un modelo de interconexión de componentes. La plataforma PicBit surge como respuesta a estas cuestiones. Consiste en una plataforma social de construcción de perfiles basada en estos elementos. Desde la perspectiva del usuario final se trata de una herramienta para crear perfiles y comunidades sociales, mientras que desde una perspectiva académica, la plataforma consiste en un entorno de pruebas o sandbox de componentes web. Para ello, será necesario implementar el extremo servidor de dicha plataforma, enfocado a la labor de explotación, por medio de la definición de una interfaz REST de operaciones y un sistema para la recolección de eventos de usuario en la plataforma. Gracias a esta plataforma se podrán discernir qué parámetros influyen positivamente en la experiencia de uso de un componente, así como descubrir el futuro potencial de este tipo de desarrollos.---ABSTRACT---The web evolves into a more interactive platform. From the actual version of the web, named as web 2.0, many paradigms and standards have arisen. One of those standards is web components, a set of concepts to define new HTML tags that covers a specific function inside a web page. It is necessary to measure the quality of this kind of software development, and the aim behind this approach is to determine if this new set of concepts would survive in the actual web paradigm. To achieve this, it is described a model to analyse components, in the terms of quality measure and interconnection model description. PicBit consists of a social platform to use web components. From the point of view of the final user, this platform is a tool to create social profiles using components, whereas from the point of view of technicians, it consists of a sandbox of web components. Thanks to this platform, we will be able to discover those parameters that have a positive effect in the user experience and to discover the potential of this new set of standards into the web 2.0.

The 2.0-Å resolution crystal structure of a trimeric antibody fragment with noncognate VH–VL domain pairs shows a rearrangement of VH CDR3

The 2.0-Å resolution x-ray crystal structure of a novel trimeric antibody fragment, a “triabody,” has been determined. The trimer is made up of polypeptides constructed in a manner identical to that previously described for some “diabodies”: a VL domain directly fused to the C terminus of a VH domain—i.e., without any linker sequence. The trimer has three Fv heads with the polypeptides arranged in a cyclic, head-to-tail fashion. For the particular structure reported here, the polypeptide was constructed with a VH domain from one antibody fused to the VL domain from an unrelated antibody giving rise to “combinatorial” Fvs upon formation of the trimer. The structure shows that the exchange of the VL domain from antibody B1-8, a Vλ domain, with the VL domain from antibody NQ11, a Vκ domain, leads to a dramatic conformational change in the VH CDR3 loop of antibody B1-8. The magnitude of this change is similar to the largest of the conformational changes observed in antibody fragments in response to antigen binding. Combinatorial pairing of VH and VL domains constitutes a major component of antibody diversity. Conformationally flexible antigen-binding sites capable of adapting to the specific CDR3 loop context created upon VH–VL pairing may be employed by the immune system to maximize the structural diversity of the immune response.