Problem-based learning : does accounting education need it?

Problem-based learning (PBL) has been used successfully in disciplines such as medicine, nursing, law and engineering. However a review of the literature shows that there has been little use of this approach to learning in accounting. This paper extends the research in accounting education by reporting the findings of a case study of the development and implementation of PBL at the Queensland University of Technology (QUT) in a new Accountancy Capstone unit that began in 2006. The fundamentals of the PBL approach were adhered to. However, one of the essential elements of the approach adopted was to highlight the importance of questioning as a means of gathering the necessary information upon which decisions are made. This approach can be contrasted with the typical ‘give all the facts’ case studies that are commonly used. Another feature was that students worked together in the same group for an entire semester (similar to how teams in the workplace operate) so there was an intended focus on teamwork in solving unstructured, real-world accounting problems presented to students. Based on quantitative and qualitative data collected from student questionnaires over seven semesters, it was found that students perceived PBL to be effective, especially in terms of developing the skills of questioning, teamwork, and problem solving. The effectiveness of questioning is very important as this is a skill that is rarely the focus of development in accounting education. The successful implementation of PBL in accounting through ‘learning by doing’ could be the catalyst for change to bring about better learning outcomes for accounting graduates.

Calculation of volume from crank angle using reconfigurable hardware

Fast calculation of quantities such as in-cylinder volume and indicated power is important in internal combustion engine research. Multiple channels of data including crank angle and pressure were collected for this purpose using a fully instrumented diesel engine research facility. Currently, existing methods use software to post-process the data, first calculating volume from crank angle, then calculating the indicated work and indicated power from the area enclosed by the pressure-volume indicator diagram. Instead, this work investigates the feasibility of achieving real-time calculation of volume and power via hardware implementation on Field Programmable Gate Arrays (FPGAs). Alternative hardware implementations were investigated using lookup tables, Taylor series methods or the CORDIC (CoOrdinate Rotation DIgital Computer) algorithm to compute the trigonometric operations in the crank angle to volume calculation, and the CORDIC algorithm was found to use the least amount of resources. Simulation of the hardware based implementation showed that the error in the volume and indicated power is less than 0.1%.

Change-induced stressors and effective coping strategies in nursing

This study seeks to examine the causality of non-nursing and nursing stressors on the job satisfaction of nurses and how coping strategies have a mediating influence on this relationship in the context of sector-wide reform. To conceptualize the relationships, a mediation path model was developed. Data were collected at two time points using a self-completed online survey over a six monthly interval. During time 1, 306 Australian nurses completed the online survey. In the first wave (time 1), 306 Australian nurses completed the survey. In the second wave (time 2), matched survey data were collected from 119 nurses. The analysis showed a significant causal relationship between time 1 administrative and role stressors and an increase in nursing stress in time 2. A significant relationship was also identified between job specific context stressors and the adoption of effective coping strategies to deal with increased level of change-induced stress and strain and the likelihood of reporting higher level of job satisfaction in time 2. This study contributes by providing an integrated theoretical perspective on how stress affects retention that has so far been elusive. This is useful to researchers wanting to examine this phenomenon further and practitioners responsible for implementing change programs.

Modeling heat and mass transfer process during convection drying of fruit

Fruit drying is a process of removing moisture to preserve fruits by preventing microbial spoilage. It increases shelf life, reduce weight and volume thus minimize packing, storage, and transportation cost and enable storage of food under ambient environment. But, it is a complex process which involves combination of heat and mass transfer and physical property change and shrinkage of the material. In this background, the aim of this paper to develop a mathematical model to simulate coupled heat and mass transfer during convective drying of fruit. This model can be used predict the temperature and moisture distribution inside the fruits during drying. Two models were developed considering shrinkage dependent and temperature dependent moisture diffusivity and the results were compared. The governing equations of heat and mass transfer are solved and a parametric study has been done with Comsol Multiphysics 4.3. The predicted results were validated with experimental data.

End-expiratory lung volume recovers more slowly after closed endotracheal suctioning than after open suctioning : a randomized crossover study

Purpose Endotracheal suctioning causes significant lung derecruitment. Closed suction (CS) minimizes lung volume loss during suction, and therefore, volumes are presumed to recover more quickly postsuctioning. Conflicting evidence exists regarding this. We examined the effects of open suction (OS) and CS on lung volume loss during suctioning, and recovery of end-expiratory lung volume (EELV) up to 30 minutes postsuction. Material and Methods Randomized crossover study examining 20 patients postcardiac surgery. CS and OS were performed in random order, 30 minutes apart. Lung impedance was measured during suction, and end-expiratory lung impedance was measured at baseline and postsuctioning using electrical impedance tomography. Oximetry, partial pressure of oxygen in the alveoli/fraction of inspired oxygen ratio and compliance were collected. Results Reductions in lung impedance during suctioning were less for CS than for OS (mean difference, − 905 impedance units; 95% confidence interval [CI], − 1234 to –587; P < .001). However, at all points postsuctioning, EELV recovered more slowly after CS than after OS. There were no statistically significant differences in the other respiratory parameters. Conclusions Closed suctioning minimized lung volume loss during suctioning but, counterintuitively, resulted in slower recovery of EELV postsuction compared with OS. Therefore, the use of CS cannot be assumed to be protective of lung volumes postsuctioning. Consideration should be given to restoring EELV after either suction method via a recruitment maneuver.

Understanding pre-service teacher conceptual change through slowmation animation

This paper is an exploration of conceptual change. It reports on a study which utilised Hewson and Lemberger’s (2000) Conceptual Status Elements, and explores the unique contribution of Slowmation Animation in the conceptual learning of pre-service science teachers. 15 short animations were created by 55 participants in a single two hour tutorial class as a part of their methods training. Conceptual change was found to occur when their animation topic challenged their understandings of the processes within the scientific concept. The pre-service science teachers reported an enthusiasm for Slowmation Animation as a method for learning how to learn, as well as for highlighting what they thought they knew, but didn’t really know.

Multiphysics modelling of convective drying of food materials

Currently, 1.3 billion tonnes of food is lost annually due to lack of proper processing and preservation method. Drying is one of the easiest and oldest methods of food processing which can contribute to reduce that huge losses, combat hunger and promote food security. Drying increase shelf life, reduce weight and volume of food thus minimize packing, storage, and transportation cost and enable storage of food under ambient environment. However, drying is a complex process which involves combination of heat and mass transfer and physical property change and shrinkage of the food material. Modelling of this process is essential to optimize the drying kinetics and improve energy efficiency of the process. Since material properties varies with moisture content, the models should not consider constant materials properties, constant diffusion .The objective of this paper is to develop a multiphysics based mathematical model to simulate coupled heat and mass transfer during convective drying of fruit considering variable material properties. This model can be used predict the temperature and moisture distribution inside the food during drying. Effect of different drying air temperature and drying air velocity on drying kinetics has been demonstrated. The governing equations of heat and mass transfer were solved with Comsol Multiphysics 4.3.

Adapting wheat sowing dates to projected climate change in the Australian subtropics: analysis of crop water use and yield

Projected increases in atmospheric carbon dioxide concentration ([CO2]) and air temperature associated with future climate change are expected to affect crop development, crop yield, and, consequently, global food supplies. They are also likely to change agricultural production practices, especially those related to agricultural water management and sowing date. The magnitude of these changes and their implications to local production systems are mostly unknown. The objectives of this study were to: (i) simulate the effect of projected climate change on spring wheat (Triticum aestivum L. cv. Lang) yield and water use for the subtropical environment of the Darling Downs, Queensland, Australia; and (ii) investigate the impact of changing sowing date, as an adaptation strategy to future climate change scenarios, on wheat yield and water use. The multimodel climate projections from the IPCC Coupled Model Intercomparison Project (CMIP3) for the period 2030–2070 were used in this study. Climate scenarios included combinations of four changes in air temperature (08C, 18C, 28C, and 38C), three [CO2] levels (380 ppm, 500 ppm, and 600 ppm), and three changes in rainfall (–30%, 0%, and +20%), which were superimposed on observed station data. Crop management scenarios included a combination of six sowing dates (1 May, 10 May, 20 May, 1 June, 10 June, and 20 June) and three irrigation regimes (no irrigation (NI), deficit irrigation (DI), and full irrigation (FI)). Simulations were performed with the model DSSAT4.5, using 50 years of daily weather data.Wefound that: (1) grain yield and water-use efficiency (yield/evapotranspiration) increased linearly with [CO2]; (2) increases in [CO2] had minimal impact on evapotranspiration; (3) yield increased with increasing temperature for the irrigated scenarios (DI and FI), but decreased for the NI scenario; (4) yield increased with earlier sowing dates; and (5) changes in rainfall had a small impact on yield for DI and FI, but a high impact for the NI scenario.

Proceedings of the Interior Space in Other Places : An IDEA [Interior Design/Interior Architecture Educators Association] Symposium [Edited Volume of Proceedings]

Conference curatorial outline The focus of this symposium was to question whether interior design is changing relative to local conditions, and the effect globalization has on the performance of regional, particularly Southern hemisphere identities. The intention being to understand how theory and practice is transposed to ‘distant lands’, and how ideas shift from one place to another. To this extent the symposium invited papers on the export, translation and adoption of theories and practices of interior design to differing climates, cultures, and landscapes. This process, sometimes referred to as a shift from ‘the centre to the margins’, seeks new perspectives on the adoption of European and US design ideas abroad, as well as their return to their place of origin. Papers were invited from a range of perspectives including the export of ideas/attitudes to interior spaces, history of interior spaces abroad, and the adoption of ideas/processes to new conditions. Paralleling this trafficking of ideas are broader observations about interior space that emerge through specificity of place. These include new and emerging directions and differences in our understanding of interiority; both real and virtual, and an ever-changing relationship to city, suburb and country. Keeping within the Symposium theme the intention was to examine other places, particularly on the margins of the discipline’s domain. Semantic slippage aside, there are a range of approaches that engage outside events and practices enabling a transdisciplinary practice that draws from other philosophical and theoretical frameworks. Moreover as the field expands and new territories are opened up, the virtual worlds of computer gaming, animations, and interactive environments, both rely on and produce new forms of expression. This raises questions about the extent such spaces adopt or translate existing theory and practice, that is the transposition from one area to another and their return to the discipline.

Increasing learners’ satisfaction/intention to adopt more e-learning

Purpose: E-learning is an organisationally risky investment given the cost and poor levels of adoption by users. In order to gain a better understanding of this problem, a study was conducted into the use of e-learning in a rail organisation. Design/methodology/approach: Using an online survey, employees of a rail-sector organisation were questioned about their use and likelihood of adoption of e-learning. This study explores the factors that affect the way in which learners experience and perceive such systems. Using statistical analysis, twelve hypotheses are tested and explored. Relationships between learning satisfaction, intention to adopt and the characteristics of e-learning systems were established. Findings: The study found that e-learning characteristics can buffer the relationship between learner characteristics and intention to adopt further e-learning in the future. Further, we found that high levels of support can compensate individuals who are low in technological efficacy to adopt e-learning. Research limitations/implications: The cross-sectional design of the study and its focus on measuring intention to adopt as opposed to actual adoption are both limitations. Future research using longitudinal design and research employing a time lag design measuring actual adoption as well as intention are recommended. Practical implications: From a practical perspective, organizations can focus on the actual content and authenticity of the learning experience delivered by the e-learning system to significantly impact how employees will perceive and use e-learning in the future. Low technological efficacy individuals tend not to adopt new technology. Instead of changing individuals’ personalities, organizations can implement supportive policies and practices which would lead to higher e-learning adoption rate among low efficacy individuals. Originality/value: The study integrates technology adoption and learning literatures in developing enablers for e-learning in organizations. Further, this study collects data from rail employees, and therefore the findings are practical to an industry.

Eat Cook Grow : Mixing Human-Computer Interactions with Human-Food Interactions

Food has been a major agenda in political, socio-cultural, and environmental domains throughout history. The significance of food has been particularly highlighted in recent years with the growing public awareness of the unfolding impacts of climate change, challenging our understanding, practice, and expectations of our relationship with food. Parallel to this development has been the rise of web applications such as blogs, wikis, video and photo sharing sites, and social networking systems that are arguably more open, collaborative, and personalisable. These so-called ‘Web 2.0’ technologies have contributed to a more participatory Internet experience than what had previously been possible. An increasing number of these social applications are now available on mobile technologies where they take advantage of device-specific features such as sensors, location and context awareness, further expanding potential for the culture of participation and creativity. This international volume assembles a diverse collection of book chapters that contribute towards exploring and better understanding the opportunities and challenges provided by tools, interfaces, methods, and practices of social and mobile technology to enable engagement with people and creativity in the domain of food in contemporary society. It brings together an international group of academics and practitioners from a diverse range of disciplines such as computing and engineering, social sciences, digital media and human-computer interaction to critically examine a range of applications of social and mobile technology, such as social networking, mobile interaction, wikis, twitter, blogging, mapping, shared displays and urban screens, and their impact to foster a better understanding and practice of environmentally, socio-culturally, economically, and health-wise sustainable food culture.

Retirement villages : time for a change?

In retirement, many Australians relocate to a less onerous form of home occupation. Some downsize their house, or move to a strata title complex. Others, attracted by lifestyle perceptions, move into a retirement village. However, research shows Retirement Village documentation is complex and more analogous to commercial leasing than home ownership. The most recent government review by New South Wales, confirms the need for change. This paper identifies the current retirement village tenure models generally available in Australia. By comparing the various State/Territory systems the authors draw conclusions regarding the adoption of standardised documentation and uniform Australian Retirement Village legislation.

Stability and convergence of a finite volume method for the space fractional advection-dispersion equation

We consider the space fractional advection–dispersion equation, which is obtained from the classical advection–diffusion equation by replacing the spatial derivatives with a generalised derivative of fractional order. We derive a finite volume method that utilises fractionally-shifted Grünwald formulae for the discretisation of the fractional derivative, to numerically solve the equation on a finite domain with homogeneous Dirichlet boundary conditions. We prove that the method is stable and convergent when coupled with an implicit timestepping strategy. Results of numerical experiments are presented that support the theoretical analysis.