Suicide tourism: a pilot study on the swiss phenomenon

While assisted suicide (AS) is strictly restricted in many countries, it is not clearly regulated by law in Switzerland. This imbalance leads to an influx of people —‘suicide tourists’—coming to Switzerland, mainly to the Canton of Zurich, for the sole purpose of committing suicide. Political debate regarding ‘suicide tourism’ is taking place in many countries. Swiss medicolegal experts are confronted with these cases almost daily, which prompted our scientific investigation of the phenomenon. The present study has three aims: (1) to determine selected details about AS in the study group (age, gender and country of residence of the suicide tourists, the organisation involved, the ingested substance leading to death and any diseases that were the main reason for AS); (2) to find out the countries from which suicide tourists come and to review existing laws in the top three in order to test the hypothesis that suicide tourism leads to the amendment of existing regulations in foreign countries; and (3) to compare our results with those of earlier studies in Zurich. We did a retrospective data analysis of the Zurich Institute of Legal Medicine database on AS of on-Swiss residents in the last 5 years (2008–2012), and internet research for current legislation and political debate in the three foreign countries most concerned. We analysed 611 cases from 31 countries all over the world. Non-terminal conditions such as neurological and rheumatic diseases are increasing among suicide tourists. The unique phenomenon of suicide tourism in Switzerland may indeed result in the amendment or supplementary guidelines to existing regulations in foreign countries.

Avalanche related damage potential - changes of persons and mobile values since the mid-twentieth century, case study Galtür

When determining risk related to natural hazard processes, many studies neglect the investigations of the damage potential or are limited to the assessment of immobile values like buildings. However, persons as well as mobile values form an essential part of the damage potential. Knowledge of the maximum number of exposed persons in an endangered area is of great importance for elaborating evacuation plans and immediate measures in case of catastrophes. In addition, motor vehicles can also be highly damaged, as was shown by the analysis of avalanche events. With the removal of mobile values in time as a preventive measure this kind of damage can be minimised. This study presents a method for recording the maximum number of exposed persons and monetarily assessing motor vehicles in the municipality of Galt¨ur (Tyrol, Austria). Moreover, general developments of the damage potential due to significant socio-economic changes since the mid-twentieth century are pointed out in the study area. The present situation of the maximum number of persons and mobile values in the official avalanche hazard zones of the municipality is described in detail. Information on the number of persons is derived of census data, tourism and employment statistics. During the winter months, a significant increase overlaid by strong short-term fluctuation in the number of persons can be noted. These changes result from a higher demand of tourism related manpower as well as from varying occupancy rates. The number of motor vehicles in endangered areas is closely associated to the number of exposed persons. The potential number of motor vehicles is investigated by means of mapping, statistics on the stock of motor vehicles and the density distribution. Diurnal and seasonal fluctuations of the investigated damage potential are pointed out. The recording of the number of persons and mobile values in endangered areas is vital for any disaster management.

Capability of E-Bike Tourism in Switzerland

AIM OF PAPER AND RESEARCH QUESTIONS The primary aim of this investigation was to examine, if tourism in Switzerland can be stimulated by focusing on e-bike offers. Switzerland is an attractive and manifold country for bike tourism. However, there are plenty of hilly and steep areas, where the topography is quite demanding and cycling is predestined to ambitious sportsperson. Less performance-oriented bike tourists are possibly discouraged by the challenges of the landscape. E-bikes seem to be a reasonable alterna-tive to enable less trained person to attend bike tours in steeper regions as well as to keep heterogeneous groups together. E-bikes are already popular in Switzerland for daily routes as the journey to work, but they are not very common in the tour-istic context. The presented investigation evaluates the current standing of supply and demand for e-bike tourism and asks for opportunities and threats in the future development. LITERTURE REVIEW The existing frameworks to analyse capability in the field of sport tourism are limited, because of the broad variation of sports and tourism types. Still several conceptions are valuable to evaluate the opportunities of e-bike tourism in Switzer-land. According to Higham and Hinch (2009) the potential of touristic products and destinations always depends on the interaction among the factors place, people and activity. Standeven and de Knop (1999) support this position by identify-ing the experience of place as a key component of the sport tourism experience. Bull (2005) assumes that place not only affects experience. In his opinion, the specific spatially located resources are even crucial for the existence of nature sports. He identifies four factors determining the attraction of touristic products or destination, as physical characteristics, accessibility and infrastructural arrangements, political and economic resources as well as cultural and perceptual aspects. Concerning the demand side (people) the contemporary research is guided by an individual psychological focus delivering mainly results about motives and the decision making process (e.g. Görtz & Hürten, 2011). RESEARCH DESIGN AND DATA ANALYSIS The presented study is based on a between method triangulation, consisting of qualitative interviews with important stake-holders on the supply side and a cross sectional survey on the demand side. Qualitative interviews were conducted with the first provider of touristic e-bike routes and with the manager of the leading e-bike rental company in Switzerland. The interviews were evaluated by qualitative content analysis according to Mayring (2008). The survey covered a randomized sample of 748 adult persons and focused on interests and needs of potential consumers. The concluding potentials analy-sis combined the results of the interviews and the survey with the findings of literature research. As central outcome the strengths, weaknesses, opportunities and threats were evaluated and presented by SWOT-analysis. RESULTS Results showed that the development of e-bike tourism in Switzerland was not initiated by tourism promoter, but by an innovative e-bike producer. However, also for the manufacturer the fit between landscape (place), product (activity) and visitors (people) was the crucial criterion. The first e-bike tours were offered in a demanding and rural region, in order that the experience of place was able to promote a positive overall experience. Due to the success of the first touristic e-bike products, several tourism regions started to extend their portfolio with e-bike offers. To date a nationwide network for signalised e-bike tours, rental stations and changing stations for rechargeable batteries is established. Despite the attractive offer, the demand is only moderate. The obtained results of the consumer survey pointed at a certain barrier to use e-bikes for tourism activities. The most substantial barrier is the missing affinity for bike tourism in general. Another notable group considering themselves as “fit enough for normal bike tourism”. Nevertheless 55% of the respondent are interested in tour-istic e-bike products. Looking only at people with e-bike tourism experience, even 92% are interested in further activities. DISCUSSION AN CONCLUSION The current study findings are encouraging because they suggest a superior suitability and an attractive level of e-bike tourism products in Switzerland. The results of the consumer survey indicate an increasing demand for e-bike tourism. The investigation also points at some risks, as the rivalry for bike tourism or the raised safety hazard because of the increased driving speed. Summing up, the results support the conclusion, that e-bike tourism will become more important in the com-ing years. However, to reach the goal relevant trends as the requirement for customised offers must be considered and marketing activities are supposed to be extended. REFERENCES Bull, C. (2005). Sport tourism resource analysis. In J. Higham (Ed.), Sport tourism destination: Issues, opportunities and analysis (pp. 25-38). Amsterdam: Elsevier Butterworth-Heinemann. Görtz, M., & D. Hürten (2011). Motive der Radurlauber, psychografische Merkmale und Reiseverhalten. In A. Dreyer, E. Miglbauer & R. Mühlnickel (Hrsg.), Radtourismus. Entwicklungen, Potenziale, Perspektiven (S. 36-43). München: Olden-bourg. Higham, J., & Hinch, T. (2009). Sport and Tourism. Globalization, Mobility and Identity. Amsterdam: Butterworth-Heinemann. Mayring, P. (2008). Qualitative Inhaltsanalyse. Grundlagen und Techniken (10. Aufl.). Weinheim: Beltz Verlag. Standeven, J., & De Knop, P. (1999). Sport Tourism. Campaign: Human Kinetics.

¿Es Business & Tourism una empresa eficaz y eficiente?

Hoy en día es muy importante para el crecimiento y supervivencia de la empresa desempeñarse con eficacia y eficiencia tanto en los distintos puestos de trabajo, en la satisfacción de los distintos interesados y en el desarrollo de las actividades empresariales en general. Esta tesis pretende determinar si la empresa Business & Tourism S.R.L es eficaz y eficiente. Para esto se desarrollará un modelo integral de evaluación de eficacia y eficiencia de la organización, considerando las distintas dimensiones de la misma. Las evaluaciones que realizan en la actualidad las distintas empresas no presentan integridad, es decir, solo evalúan aspectos aislados y en periodos de tiempo diferentes, lo que dificulta tener una visión y apreciación integral del desempeño de la empresa. Es por este motivo que se busca proponer un modelo de evaluación de eficacia y eficiencia que abarque las distintas dimensiones de la organización. Este modelo se realizó para el caso particular de la empresa Business & Tourism S.R.L, perteneciente al rubro de Alquiler de vehículos. Se pretende que el mismo sea aplicable a cualquier otra empresa, adaptándolo a su estructura en particular.

Territorial quality and sustainable development : Indicators of performance in the context of a model for participatory rural tourism certification

El turismo rural ha sido incorporado por pequeños establecimientos agropecuarios del partido de Cnel. Suárez, provincia de Buenos Aires, Argentina, como actividad alternativa para mejorar la calidad de vida de sus miembros y superar situaciones de crisis agravadas por la marginalidad productiva del SO bonaerense, región a la que pertenecen. Bajo el programa Cambio Rural del INTA (Instituto Nacional de Tecnología Agropecuaria) conforman el Grupo 'Cortaderas II', junto a otros emprendedores interesados en valorar el medio rural. Han avanzado en el proceso de reconocimiento de su identidad y puesta en valor de recursos específicos con anclaje en el territorio. Esta identidad comienza a apreciarse internamente, a raíz de la dinámica grupal lograda y la incipiente articulación con otros actores para la construcción de un partenariado público y privado que genere sinergias y contribuya al desarrollo sustentable del territorio. Sin embargo, aún no es claramente percibida por el turista, cada vez más exigente. Por lo tanto, el presente trabajo persigue proponer indicadores para evaluar el desempeño de un Sistema de Gestión de Calidad con enfoque territorial que, adaptando el modelo europeo 'Marca de Calidad Territorial', sustente una estrategia comercial de diferenciación del servicio y simultáneamente, mida el progreso hacia una mejor calidad de vida y fortalecimiento de vínculos con la cultura local y el entorno físico-natural en el marco del desarrollo sustentable. La investigación se plantea para la micro escala, ya que se trata de un estudio de caso, relevándose información primaria mediante observación directa y entrevistas semi-estructuradas, complementada con información secundaria diagnóstica utilizada por INTA. Las características del grupo y su dinámica de funcionamiento bajo el programa Cambio Rural revelan que es posible adoptar un proceso de certificación participativa propuesto para cuatro pilares de la calidad: de Bienes y Servicios, Institucional, Social y Ambiental. El modelo se integra con indicadores de evaluación de desempeño, agrupados en áreas clave para cada una de las dimensiones de la sustentabilidad, que contemplan el paisaje y la gestión de los recursos naturales; el impacto económico de la actividad, la calidad de la oferta y satisfacción del turista; así como las relaciones sociales internas y los vínculos con otros actores del territorio. Principalmente se encontraron fortalezas en la búsqueda de partenariados y debilidades en aspectos de comunicación y promoción. Se considera que este sistema de herramientas de gestión sustentable permitiría superar las dificultades de una certificación individual, pudiendo aplicarse a emprendimientos con otra ubicación geográfica

Territorial quality and sustainable development : Indicators of performance in the context of a model for participatory rural tourism certification

El turismo rural ha sido incorporado por pequeños establecimientos agropecuarios del partido de Cnel. Suárez, provincia de Buenos Aires, Argentina, como actividad alternativa para mejorar la calidad de vida de sus miembros y superar situaciones de crisis agravadas por la marginalidad productiva del SO bonaerense, región a la que pertenecen. Bajo el programa Cambio Rural del INTA (Instituto Nacional de Tecnología Agropecuaria) conforman el Grupo 'Cortaderas II', junto a otros emprendedores interesados en valorar el medio rural. Han avanzado en el proceso de reconocimiento de su identidad y puesta en valor de recursos específicos con anclaje en el territorio. Esta identidad comienza a apreciarse internamente, a raíz de la dinámica grupal lograda y la incipiente articulación con otros actores para la construcción de un partenariado público y privado que genere sinergias y contribuya al desarrollo sustentable del territorio. Sin embargo, aún no es claramente percibida por el turista, cada vez más exigente. Por lo tanto, el presente trabajo persigue proponer indicadores para evaluar el desempeño de un Sistema de Gestión de Calidad con enfoque territorial que, adaptando el modelo europeo 'Marca de Calidad Territorial', sustente una estrategia comercial de diferenciación del servicio y simultáneamente, mida el progreso hacia una mejor calidad de vida y fortalecimiento de vínculos con la cultura local y el entorno físico-natural en el marco del desarrollo sustentable. La investigación se plantea para la micro escala, ya que se trata de un estudio de caso, relevándose información primaria mediante observación directa y entrevistas semi-estructuradas, complementada con información secundaria diagnóstica utilizada por INTA. Las características del grupo y su dinámica de funcionamiento bajo el programa Cambio Rural revelan que es posible adoptar un proceso de certificación participativa propuesto para cuatro pilares de la calidad: de Bienes y Servicios, Institucional, Social y Ambiental. El modelo se integra con indicadores de evaluación de desempeño, agrupados en áreas clave para cada una de las dimensiones de la sustentabilidad, que contemplan el paisaje y la gestión de los recursos naturales; el impacto económico de la actividad, la calidad de la oferta y satisfacción del turista; así como las relaciones sociales internas y los vínculos con otros actores del territorio. Principalmente se encontraron fortalezas en la búsqueda de partenariados y debilidades en aspectos de comunicación y promoción. Se considera que este sistema de herramientas de gestión sustentable permitiría superar las dificultades de una certificación individual, pudiendo aplicarse a emprendimientos con otra ubicación geográfica

Territorial quality and sustainable development : Indicators of performance in the context of a model for participatory rural tourism certification

El turismo rural ha sido incorporado por pequeños establecimientos agropecuarios del partido de Cnel. Suárez, provincia de Buenos Aires, Argentina, como actividad alternativa para mejorar la calidad de vida de sus miembros y superar situaciones de crisis agravadas por la marginalidad productiva del SO bonaerense, región a la que pertenecen. Bajo el programa Cambio Rural del INTA (Instituto Nacional de Tecnología Agropecuaria) conforman el Grupo 'Cortaderas II', junto a otros emprendedores interesados en valorar el medio rural. Han avanzado en el proceso de reconocimiento de su identidad y puesta en valor de recursos específicos con anclaje en el territorio. Esta identidad comienza a apreciarse internamente, a raíz de la dinámica grupal lograda y la incipiente articulación con otros actores para la construcción de un partenariado público y privado que genere sinergias y contribuya al desarrollo sustentable del territorio. Sin embargo, aún no es claramente percibida por el turista, cada vez más exigente. Por lo tanto, el presente trabajo persigue proponer indicadores para evaluar el desempeño de un Sistema de Gestión de Calidad con enfoque territorial que, adaptando el modelo europeo 'Marca de Calidad Territorial', sustente una estrategia comercial de diferenciación del servicio y simultáneamente, mida el progreso hacia una mejor calidad de vida y fortalecimiento de vínculos con la cultura local y el entorno físico-natural en el marco del desarrollo sustentable. La investigación se plantea para la micro escala, ya que se trata de un estudio de caso, relevándose información primaria mediante observación directa y entrevistas semi-estructuradas, complementada con información secundaria diagnóstica utilizada por INTA. Las características del grupo y su dinámica de funcionamiento bajo el programa Cambio Rural revelan que es posible adoptar un proceso de certificación participativa propuesto para cuatro pilares de la calidad: de Bienes y Servicios, Institucional, Social y Ambiental. El modelo se integra con indicadores de evaluación de desempeño, agrupados en áreas clave para cada una de las dimensiones de la sustentabilidad, que contemplan el paisaje y la gestión de los recursos naturales; el impacto económico de la actividad, la calidad de la oferta y satisfacción del turista; así como las relaciones sociales internas y los vínculos con otros actores del territorio. Principalmente se encontraron fortalezas en la búsqueda de partenariados y debilidades en aspectos de comunicación y promoción. Se considera que este sistema de herramientas de gestión sustentable permitiría superar las dificultades de una certificación individual, pudiendo aplicarse a emprendimientos con otra ubicación geográfica

Mejora del comportamiento térmico de los morteros de cal aditivados y su empleo en la rehabilitación de inmuebles = Improvement of thermal behaviour of additived lime mortars and their use in rehabilitation of buildings

La envolvente de la edificación es la responsable de equilibrar el intercambio energético entre el interior y el exterior, por lo tanto cualquier actuación encaminada a la reducción del consumo energético ha de establecer, como uno de sus objetivos prioritarios, la mejora del comportamiento de la misma. Las edificaciones anteriores a 1940 constituyen la mayor parte de las existentes en áreas rurales y centros urbanos. En ellas, la repercusión de la fachada sobre las transmitancias globales pone de manifiesto la necesidad de intervención. Sin embargo, su elevada inercia térmica y los importantes saltos térmicos característicos de gran parte de España plantean la importancia de que aquélla se efectúe por el exterior. A tal respecto, la falta de disponibilidad de espesor suficiente para implantar sistemas tipo SATE deriva en que, frecuentemente, la única solución viable sea la de aislar por el interior perdiendo con ello la capacidad de acumulación térmica del muro y con el asociado riesgo de condensaciones. La amplia tradición en el empleo de revestimientos, especialmente en base de cal, permiten que éstos sean utilizados no sólo como elemento estético o de protección de la obra de fábrica antigua sino también para la mejora del comportamiento térmico del soporte, si se aprovecha el mecanismo de transmisión térmica por radiación. Éste es el objetivo de la presente Tesis Doctoral en la que se estudia la modificación de las propiedades radiantes de los morteros de revestimiento para la mejora de la eficiencia energética de las construcciones históricas, principalmente las constituidas por muros monolíticos, aunque podría ser de aplicación a otro tipo de construcciones compuestas por diversas capas. Como punto de partida, se estudió y revisó la documentación disponible sobre las investigaciones de las tres áreas científico-tecnológicas que convergen en la Tesis Doctoral: rehabilitación, material y comportamiento térmico, a partir de lo cual se comprobó la inexistencia de estudios similares al objeto de la presente Tesis Doctoral. Complementariamente, se analizaron los revestimientos en lo concerniente a los materiales que los constituyen, la composición de las mezclas y características de cada una de las capas así como al enfoque que, desde el punto de vista térmico, se estimaba más adecuado para la obtención de los objetivos propuestos. Basándonos en dichos análisis, se preseleccionaron ochenta materiales que fueron ensayados en términos de reflectancia y emisividad para elegir cuatro con los que se continuó la investigación. Éstos, junto con la cal elegida para la investigación y el árido marmóreo característico de la última capa de revestimiento, fueron caracterizados térmicamente, de forma pormenorizada, así como química y físicamente. Los fundamentos teóricos y los estudios preliminares desarrollados con distintos materiales, en estado fresco y endurecido, fueron empleados en la dosificación de componentes de las mezclas, en dos proporciones distintas, para el estudio del efecto del agregado. Éstas se ensayaron en estado fresco, para comprobar su adecuación de puesta en obra y prever su VI adherencia al soporte, así como en estado endurecido a 28 y 90 días de curado, para conocer las propiedades que permitieran prever su compatibilidad con aquél y estimar el alcance de la reducción de transferencias térmicas lograda. Además, se estudiaron las características generales de las mezclas que sirvieron para establecer correlaciones entre distintas propiedades y entender los resultados mecánicos, físicos (comportamiento frente al agua) y energéticos. Del estudio conjunto de las distintas propiedades analizadas se propusieron dos mezclas, una blanca y otra coloreada, cuyas características permiten garantizar la compatibilidad con la obra de fábrica antigua, desde el punto de vista físico y mecánico, y preservar la autenticidad de los revestimientos, en cuanto a la técnica de aplicación tradicional en sistemas multicapa. El comportamiento térmico de las mismas, sobre una obra de fábrica de 40 cm de espesor, se estimó, en estado estacionario y pseudo-transitorio, demostrándose reducciones del flujo térmico entre 16-48%, en condiciones de verano, y entre el 6-11%, en invierno, en función de la coloración y de la rugosidad de la superficie, en comparación con el empleo de la mezcla tradicional. Por lo que, se constata la viabilidad de los materiales compuestos propuestos y su adecuación al objetivo de la investigación. VII ABSTRACT The envelope is responsible for balancing the energy exchange between the inside and outside in buildings. For this reason, any action aimed at reducing energy consumption must establish, as one of its key priorities, its improvement. In rural areas and urban centers, most of the constructions were built before 1940. In them, the impact of the façade on the global transmittance highlights the need for intervention. However, its high thermal inertia and fluctuation of temperatures in the majority of Spain bring up that it should be placed outside the insulation. In this regard, the lack of availability of enough thickness to implement systems such as ETICS results in that often the only viable solution is to isolate the interior, losing thereby the wall’s heat storage capacity with the associated risk of condensation. The tradition in the use of renders, especially lime-based, allows us to use them not only as an aesthetic element or to protect the ancient masonry, but also for improved thermal performance of the support by taking advantage of the heat transfer mechanism by radiation. This is the aim of this Doctoral Thesis in which the modification of the radiative properties of lime mortars for renders to improve the energy efficiency of historic buildings, mainly composed of monolithic walls, is studied, although it could be applied to other structures composed of several layers. As a starting point, the available literature in the three scientific-technological areas that converge at the Doctoral Thesis: rehabilitation, material and thermal behaviour, was reviewed, and confirmed the absence of researches similar to this Doctoral Thesis. Additionally, the renders were studied with regard to the materials that constitute them, the composition of the mixtures and the characteristics of each layer, as well as to the approach which, from a thermal point of view, was deemed the most suitable for achieving the objectives sets. Based on thre aforementioned analysis, eighty materials tested in terms of reflectance and emissivity were pre-selected, to choose four with which the research was continued. Common marble sand, used in the last layer of the renders, together with the appointed materials and hydrated lime were characterized thermally, in detail, as well as chemically and physically. The theoretical bases and preliminary studies with different materials, in fresh and hardened state, were used in the dosage of the composition of the mixtures. In order to study their effect they were used in two different proportions, that is, ten mixtures in total. These were tested in their fresh state to evaluate their setting-up suitability and foresee their adhesion to the support, as well as in their hardened state, at 28 and 90 days of curing, to establish the properties which enabled us to anticipate their compatibility with the old masonry walls and estimate the scope of the reduction of heat transfers achieved. In addition, the general characteristics of the mixtures used to establish correlations and to understand the mechanical, physical and energy results were studied. Two mixtures, one white and one colored, were proposed as the result of the different properties analysed, whose characteristics allow the guarantee of mechanical and physical compatibility VIII with the old masonry and preserve the authenticity of the renders. The thermal behavior of both, applied on a masonry wall 40 cm thick, was estimated at a steady and pseudo-transient state, with heat flow reductions between 16-48% during summertime and 6-11% during wintertime, depending on the color and surface roughness, compared to the use of the traditional mixture. So, the viability of the proposed composite materials and their fitness to the aim of the research are established.

Impact And Explosive Loads On Concrete Buildings Using Shell And Beam Type Elements

The threat of impact or explosive loads is regrettably a scenario to be taken into account in the design of lifeline or critical civilian buildings. These are often made of concrete and not specifically designed for military threats. Numerical simulation of such cases may be undertaken with the aid of state of the art explicit dynamic codes, however several difficult challenges are inherent to such models: the material modeling for the concrete anisotropic failure, consideration of reinforcement bars and important structural details, adequate modeling of pressure waves from explosions in complex geometries, and efficient solution to models of complete buildings which can realistically assess failure modes. In this work we employ LS-Dyna for calculation, with Lagrangian finite elements and explicit time integration. Reinforced concrete may be represented in a fairly accurate fashion with recent models such as CSCM model [1] and segregated rebars constrained within the continuum mesh. However, such models cannot be realistically employed for complete models of large buildings, due to limitations of time and computer resources. The use of structural beam and shell elements for this purpose would be the obvious solution, with much lower computational cost. However, this modeling requires careful calibration in order to reproduce adequately the highly nonlinear response of structural concrete members, including bending with and without compression, cracking or plastic crushing, plastic deformation of reinforcement, erosion of vanished elements etc. The main objective of this work is to provide a strategy for modeling such scenarios based on structural elements, using available material models for structural elements [2] and techniques to include the reinforcement in a realistic way. These models are calibrated against fully three-dimensional models and shown to be accurate enough. At the same time they provide the basis for realistic simulation of impact and explosion on full-scale buildings

New Constructive Solutions to Improve Energy Efficiency in Existing Buildings and their Economic Viability

The improvement of energy efficiency in existing buildings is always a challenge due to their particular, and sometimes protected, constructive solutions. New constructive regulations in Spain leave a big undefined gap when a restoration is considered because they were developed for new buildings. However, rehabilitation is considered as an opportunity for many properties because it allows owners to obtain benefits from the use of the buildings. The current financial and housing crisis has turned society point of view to existing buildings and making them more efficient is one of the Spanish government’s aims. The economic viability of a rehabilitation action should take all factors into account: both construction costs and the future operative costs of the building must be considered. Nevertheless, the application of these regulations in Spain is left to the designer’s opinion and always under a subjective point of view. With the research work described in this paper and with the help of some case-studies, the cost of adapting an existing building to the new constructive regulations will be studied and Energetic Efficiency will be evaluated depending on how the investment is recovered. The interest of the research is based on showing how new constructive solutions can achieve higher levels of efficiency in terms of energy, construction and economy and it will demonstrate that Life Cycle Costing analysis can be a mechanism to find the advantages and disadvantages of using these new constructive solutions. Therefore, this paper has the following objectives: analysing constructive solutions in existing buildings - to establish a process for assessing total life cycle costs (LCC) during the planning stages with consideration of future operating costs - to select the most advantageous operating system – To determine the return on investment in terms of construction costs based on new techniques, the achieved energy savings and investment payback periods.

Assessing the solar irradiation potential for solar photovoltaic applications in buildings at low latitudes ¿ Making the case for Brazil

In Brazil, a low-latitude country characterized by its high availability and uniformity of solar radiation, the use of PV solar energy integrated in buildings is still incipient. However, at the moment there are several initiatives which give some hints that lead to think that there will be a change shortly. In countries where this technology is already a daily reality, such as Germany, Japan or Spain, the recommendations and basic criteria to avoid losses due to orientation and tilt are widespread. Extrapolating those measures used in high latitudes to all regions, without a previous deeper analysis, is standard practice. They do not always correspond to reality, what frequently leads to false assumptions and may become an obstacle in a country which is taking the first step in this area. In this paper, the solar potential yield for different surfaces in Brazilian cities (located at latitudes between 0° and 30°S) are analyzed with the aim of providing the necessary tools to evaluate the suitability of the buildings’ envelopes for photovoltaic use