958 resultados para Tooth extractions
Resumo:
Objectives: To evaluate the placement of composite materials by new graduates using three alternative placement techniques.Methods: A cohort of 34 recently qualified graduates were asked to restore class II interproximal cavities in plastic teeth using three different techniques.
(i) A conventional incremental filling technique (Herculite XRV) using increments no larger than 2-mm with an initial layer on the cervical floor of the box of 1-mm.
(ii) Flowable bulk fill technique (Dentsply SDR) bulk fill placement in a 3-mm layer followed by an incremental fill of a microhybrid resin
(iii) Bulk fill (Kerr Sonicfill) which involved restorations placed in a 5-mm layer.
The operators were instructed in each technique, didactically and with a hands-on demonstration, prior to restoration placement.
All restorations were cured according to manufacturer’s recommendations. Each participant restored 3 teeth, 1 tooth per treatment technique.
The restorations were evaluated using modified USPHS criteria to assess both the marginal adaptation and the surface texture of the restorations. Blind evaluations were carried out independently by two examiners with the aid of magnification (loupes X2.5). Examiners were standardized prior to evaluation.
Results: Gaps between the tooth margins and the restoration or between the layers of the restoration were found in 13 of Group (i), 3 of Group (ii), and 4 of Group (iii)
Statistical analysis revealed a significant difference between the incrementally filled group (i) and the flowable bulk-fill group (ii) (p=0.0043) and between the incrementally filled (i) and the bulk fill groups (iii) (p=0.012) and no statistical difference (p=0.69) between the bulk filled groups Conclusions: Bulk fill techniques may result in a more satisfactory seal of the cavity margins when restoring with composite.
Resumo:
Increasing litter size has long been a goal of pig (Sus scrofa domesticus) breeders and producers in many countries. Whilst this has economic and environmental benefits for the pig industry, there are also implications for pig welfare. Certain management interventions are used when litter size routinely exceeds the ability of individual sows to successfully rear all the piglets (ie viable piglets outnumber functional teats). Such interventions include: tooth reduction; split suckling; cross-fostering; use of nurse sow systems and early weaning, including split weaning; and use of artificial rearing systems. These practices raise welfare questions for both the piglets and sow and are described and discussed in this review. In addition, possible management approaches which might mitigate health and welfare issues associated with large litters are identified. These include early intervention to provide increased care for vulnerable neonates and improvements to farrowing accommodation to mitigate negative effects, particularly for nurse sows. An important concept is that management at all stages of the reproductive cycle, not simply in the farrowing accommodation, can impact on piglet outcomes. For example, poor stockhandling at earlier stages of the reproductive cycle can create fearful animals with increased likelihood of showing poor maternal behaviour. Benefits of good sow and litter management, including positive human-animal relationships, are discussed. Such practices apply to all production situations, not just those involving large litters. However, given that interventions for large litters involve increased handling of piglets and increased interaction with sows, there are likely to be even greater benefits for management of hyper-prolific herds. © 2013 Universities Federation for Animal Welfare.
Resumo:
Periodontal disease does not directly affect the occluding surfaces of teeth, consequently some may find a section on periodontics a surprising inclusion. Trauma from the occlusion, however, has been linked with periodontal disease for many years. Karolyi published his pioneering paper, in 1901 'Beobachtungen uber Pyorrhoea alveolaris' (occlusal stress and 'alveolar pyorrhoea'). (1) However, despite extensive research over many decades, the role of occlusion in the aetiology and pathogenesis of inflammatory periodontitis is still not completely understood.
Resumo:
Background: Mechanotransduction in the dental pulp is mediated by mechano-sensitive trigeminal afferents but accumulating evidence suggests odontoblasts also contribute to mechano-sensory functions of the pulp as evidenced by expression of TRP channels, calcium-activated potassium channels and TREK-1 potassium channels. Activation of these mechano-sensitive channels is considered critical for the mechanotransduction of fluid movement within dentinal tubules into electrical signals transmitted by the pulpal afferents to elicit tooth sensitivity and pain. Since tooth pain and sensitivity are potentiated by inflammation we hypothesise that the inflammatory cytokine TNF-α sensitizes odontoblast responses to mechanical stimuli. Objective: To investigate the effect of TNF-α on the response of odontblast-like cells to mechanical stimuli. Method: Odontoblast-like cells were derived from dental pulp cells of immature third molars as previously described (El-karim et al 20112011 Pain, 152, 2211-2223). Odontoblast response to mechanical stimuli (application of hypotonic solution) was determined using ratiometric calcium imaging. Cells were treated with TNF-α for either 24hrs or short application for 10 mins prior to calcium imaging. Result: Odontoblast-like cells responded to hypotonic solution (230 mOSM) by increase in cytoplasmic Ca2+ concentration [Ca+2]i that was reduced to near base line in the presence of the TRPV4 antagonist RN-1734. Incubation of odontoblast -like cells with TNFα for 24 hrs resulted in a significant increase in cytoplasmic Ca2+ concentration in response to hypotonic stimuli compared to untreated cells. Similar results were obtained when cells were treated with TNF-α for 10 mins prior to imaging. Conclusion: Both short and long term treatment of odontoblasts-like cells with TNF-α resulted in enhanced responses to mechanical stimuli mediated via TRPV4 channel suggesting a role for this channel in inflammatory dental pain.
Resumo:
Introduction: Accumulating evidence supports a role for odontoblasts in initiating tooth pain, however direct ionic mechanisms underlying dentine nociceptive function remain unclear. The transient receptor potential (TRP) ion channels are directly related to cellular mechanisms of nociception and thermo-sensitive function but their expression by human odontoblasts remains to be determined. Objectives: To investigate the expression and functionality of the thermo-sensitive TRP channels TRPV1, TRPV4, TRPM8 and TRPA1 in human odontoblasts. Methods: Human odontoblasts were derived from dental pulp of immature permanent third molars by explant method. Cell lysates of odontoblasts were subject to SDS- polyacrylamide gel electrophoresis and proteins were blotted onto nitrocellulose membranes. Blots were probed with primary antibodies to TRPA1, TRPM8, TRPV4 and TRPV1. Detection of bound primary antibodies was achieved using appropriate anti-species antibody conjugates and chemiluminescent substrates. Functionality of the channels was determined with Ca2+ microfluorimetry, where cells grown in cover slips and incubated with Fura 2AM prior to stimulation with capsaicin (TRPV1 agonist), 4 alpha-phorbol 12,13-didecanoate (4áPDD) (TRPV4 agonist), icilin (TRPA1 agonist) and menthol (TRPM8 agonist). Emitted fluorescence was measured and the fluorescence ratio (R) was calculated as F340/F380 to determine the level of [Ca2+]i. Results: Western blotting confirmed the molecular localisation of thermo-sensitive TRP channels in human odontoblasts. Functionality assays revealed increase in [Ca2+]i in response to capsacin, icillin, methanol and 4áPDD indicating functional expression of TRPV1, TRPA1, TRPM8 and TRPV4 respectively. Conclusions: Functional expression of thermo-sensitive TRP channels in human odontoblasts may indicate a crucial role for odontoblasts in thermally induced dental pain. (Supported by a Research Grant from the Royal College of Surgeons of Edinburgh)
Resumo:
In the dental pulp angiogenesis is crucial for tooth development and a prerequisite for successful repair following injury and inflammation. The role of neuropeptides in pulpal inflammation has been well documented but their role in the regulation of angiogenesis in the dental pulp has not been elucidated. Objectives: The aim was to profile the expression of angiogenic growth factors produced by pulp fibroblasts and to study the effects of neuropeptides on their expression. Methods: Human pulp fibroblasts derived from healthy molar teeth were stimulated with neuropeptides previously identified in dental pulp, namely, Substance P (SP), neuropeptide Y (NPY), vasoactive intestinal polypeptide (VIP) and calcitonin related gene peptide (CGRP) for 24 and 48 hrs. Simultaneous expression of ten growth factors was quantified using a novel human angiogenesis array (Ray Biotech, USA). Results: Pulp fibroblasts expressed human angiogenic growth factors, VEGF, bFGF, PDGF-BB, HGF, ANG2, HB-EGF, PIGF, angiogenin and leptin. Among the growth factors expressed VEGF, angiogenin and HGF were abundantly expressed compared to others. Neuropeptides induced variable effects on the expression of the angiogenic factors: CGRP potently up-regulated VEGF, bFGF, HGF and PIGF after 24 hr, while NPY tended to down regulate growth factors after 24 hr in culture but markedly up regulated ANG2, bFGF and leptin after 48 hr. SP down regulated expression of all angiogenic growth factors except for leptin, while VIP induced a small increase in expression of each growth factor, irrespective of time. Conclusion: Pulp fibroblasts express a range of angiogenic growth factors including angiogenin and leptin. Neuropeptides regulate the expression of these factors, suggesting an additional role for neuropeptides in the regulation of inflammation and healing in the dental pulp.
This work is supported by TC White Research Fund
Resumo:
Introduction: Protease activated receptors (PARs) are G-protein-coupled transmembrane receptors that are expressed on many cell types and implicated in various inflammatory processes in vivo. The induction of PAR2 as a result of the inflammatory response associated with dental caries remains to be determined. Objectives: The aim was to localise the expression of PAR2 in human dental pulp from carious teeth and to confirm receptor functionality using an in vitro assay. Methods: Dental pulp sections from decalcified carious teeth were examined by immunocytochemsitry. Membrane preparations from cultured pulp fibroblasts were subject to SDS-PAGE and immunoblotting to confirm fibroblast-associated immunoreactivity. The functionality of PAR2 on dental pulp fibroblasts was studied using calcium imaging in the presence of several potential activators including a PAR2 agonist (PAR2-AP), trypsin and pulpal enzymes from a carious tooth. Results: Immunocytochemistry revealed intense PAR2 immunoreactivity on pulpal fibroblasts subjacent to carious lesions but not in surrounding regions of the dental pulp. Pulp specimens from a dental injury model showed no expression of PAR2, suggesting its expression was related to cellular changes associated with ongoing caries. The localisation of PAR2 staining to pulpal fibroblasts in carious teeth was confirmed by Western blotting which revealed PAR2 immunoreactive bands in membrane fractions prepared from pulp fibroblasts. In functional studies, challenge of cultured pupal fibroblasts with PAR2-AP, trypsin and an extract of proteolytic enzymes from a carious dental pulp, showed specific activation of PAR2. Conclusions: This work demonstrates that PAR2 is functional and inducible in human dental pulp fibroblasts in response to caries and that endogenous pulpal enzymes can activate PAR2.
Resumo:
Background: Periodontal ligament (PDL) cells are exposed to physical forces in vivo in response to mastication, parafunction, speech and orthodontic tooth movement. Although it has been shown that PDL cells perceive and respond directly to mechanical stimulation, the nature of the ion channels that mediate this mechanotransduction remain to be fully elucidated. The transient receptor potential (TRP) superfamily of ion channels is believed to play a critical role in sensory physiology, where they act as transducers for thermal, chemical and mechanical stimuli. Recent studies have shown that members of the vanilloid (TRPV) and ankyrin (TRPA) subfamilies encode mechanosensitive TRPs. The vanilloid family member TRPV4 is one such non selective calcium permeable cationic channel which has been shown to be activated by chemical ligands, hypotonicity, and mechanical stimuli. Objectives: The objective of the current study was to investigate functional expression of TRPV4 in cultured human PDL cells. Methods: Human PDL cells were grown in Dulbecco's Modified Eagle Medium with L-glutamine supplemented with 10% fetal bovine serum (FBS), 100UI/ml penicillin and 100μg/ml streptomycin. Cells in passage 4-6 were used in all experiments. TRPV4 functional expression was determined using ratiometric calcium imaging. Cultured cells were loaded with intracellular Ca2+ probe fura-2 and cells were then stimulated with the TRPV4 agonists, 4alpha-phorbol 12,13-didecanoate (4alpha-PDD), GSK1016790A or hypotonic solution. The TRPV4 antagonist RN 1734 was used to block the corresponding agonist responses. Results: PDL fibroblasts responded to application of TRPV4 agonists and hypotonic stimuli by an increase in intracellular calcium which was attenuated in the presence of the TRPV4 antagonist. Conclusions: We have shown for the first time the functional expression of the mechanosensitive TRPV4 channel in human PDL cells. The molecular identity and mechanisms of activation of mechanosensitive TRP channels in PDL cells merit further investigation.
Resumo:
Objectives: Receptor Activator of NF-kappaB ligand (RANKL), through binding to its receptor (RANK), plays an important role in osteoclast differentiation and activation. Conversely, osteoprotegerin (OPG), a decoy receptor for RANKL, inhibits osteoclastogenesis and subsequent bone turnover. Little is known about the role of resident periodontal ligament fibroblasts in regulating bone turnover. The aim of this study was to determine (i) if periodontal ligament fibroblasts produced OPG in vitro and (ii) the effects of IL-1b and TGF-b1 on OPG expression. Methods: Three human periodontal ligament fibroblast populations, developed by explant culture, were grown to confluence in 6-well plates in DMEM supplemented with 10% FCS. Cells were washed in HBSS and then cultured for an additional 48 hours in serum-free media supplemented with IL-1b or TGF-b1 at 10ng/ml. OPG expression levels in the conditioned medium were determined by ELISA (R&D Systems, UK) and confirmed by Western blot. Results: All three fibroblast strains produced quantifiable levels of OPG. Both IL-1b and, to a lesser extent, TGF-b1 significantly stimulated OPG expression in all fibroblast strains (p<0.05). Pre-incubation of samples with N-glycosidase F prior to Western blots indicated glycosylation of expressed OPG. Conclusions: These data indicate that periodontal ligament fibroblasts can regulate osteoclast activation via the RANK/RANKL signalling pathway. These fibroblasts may play an important role in regulating bone turnover both in periodontal disease and orthodontic tooth movement.
Resumo:
Objectives: The inflammatory response to pulpal injury or infection has major clinical significance. The aim of the study is to investigate the presence and regulation of expression of neuropeptide receptors on human pulp fibroblasts and whole pulp tissue. This study will investigate the expression of Substance P (NK-1) and Neuropeptide Y (NPY-Y1) receptors on pulp fibroblasts, determine the effects of Transforming Growth Factor Beta-1 (TGF-b1) and Interleukin 1-Beta (IL-1b) on the expression of NK-1 and NPY-Y1 receptors on pulp fibroblasts and examine the levels of receptor expression in whole pulp samples. Methods: Primary pulp fibroblast cell lines were obtained from patients undergoing extractions for orthodontic reasons. The cells were grown to confluence and stimulated for 5 days with IL-1b or TGF-b1. Pulp tissue fragments were obtained from freshly extracted sound and carious teeth, snap frozen in liquid nitrogen and cracked open using a vice. The monolayer was removed with cell scrapers and pelleted. The cell membranes of the cultured cells and the whole tissue were isolated using a Mem-PER® Eukaryotic Membrane Protein Extraction Reagent Kit (Pierce, UK). The membrane proteins were separated by SDS-PAGE and Western blotting was used to detect the presence of NK-1 and NPY-Y1. Results: Initial results demonstrated the presence of NK-1 and NPY-Y1 in cultured pulp fibroblasts. Following the 5 day incubation with TGF-b1, the cells appeared not to express NK-1. IL-1b had a slight stimulatory effect on NK-1 expression. The NPY-Y1 expression was not affected by either TGF-b1 or IL-1b. In whole pulp samples, levels of NK-1 were increased in carious teeth compared to caries-free teeth. The NPY-Y1 levels were similar in carious and non-carious teeth. Conclusion: These findings give an insight into how pulp cells react to inflammatory stimuli with regards to neuropeptide receptor expression and their roles in health and disease
Resumo:
Successful root canal treatment requires management of the bacterial infection within the root canal space and protection of residual tooth structure with direct/indirect restorations. Long-term success depends upon prevention of re-infection of the root canal space as well as ensuring favorable distribution of the occlusal forces throughout the residual tooth structure. Appropriate planning and design of the final restoration prior to initiating root canal treatment is paramount in achieving this objective. This article describes simultaneous restorability assessment and access cavity preparation to optimize outcome of both endodontic and prosthodontic treatment of the endodontically involved tooth.
Resumo:
Nas últimas décadas verificou-se um aumento da contaminação dos solos com metais pesados resultante de processos antropogénicos. As descargas de efluentes industriais, a actividade mineira e a aplicação de lamas residuais e de fertilizantes são as principais fontes de metais pesados. Em certas regiões, a acumulação destes elementos nos solos tem atingido níveis preocupantes para o equilíbrio dos ecossistemas. Vários estudos têm demonstrado que os metais influenciam os microrganismos afectando adversamente o seu crescimento, morfologia e actividades bioquímicas resultando num decréscimo da biomassa e diversidade. Entre os microrganismos do solo, as bactérias pertencentes ao género Rhizobium têm um elevado interesse científico, económico e ecológico devido à sua capacidade para fixar azoto. Deste modo, o trabalho desenvolvido ao longo desta tese incidiu sobre o efeito da toxicidade imposta pelos metais nas bactérias fixadoras de azoto, em particular em Rhizobium leguminosarum bv. trifolii e teve como principais objectivos: determinar o efeito dos metais pesados na sobrevivência e na capacidade de fixar azoto dos isolados de rizóbio; avaliar a influência dos metais na diversidade das populações de rizóbio isoladas de solos contaminados; determinar os níveis de tolerância do rizóbio a diferentes metais e analisar a resposta ao stresse oxidativo imposto pelo cádmio. A Mina do Braçal foi o local de estudo escolhido uma vez que os seus solos estão muito contaminados com metais em resultado da extracção de minério durante mais de 100 anos. Foram escolhidos 3 solos com diferentes graus de contaminação, o solo BC com concentrações reduzidas de metais, escolhido por estar numa zona já fora da mina e designado por solo controlo e os solos BD e BA considerados medianamente e muito contaminados, respectivamente. O Pb e o Cd foram os metais predominantes nestes solos, assim como o metalóide As, cujas concentrações ultrapassaram largamente os limites previstos na lei. Sendo as enzimas do solo boas indicadoras da qualidade do mesmo, foi determinada a actividade de algumas como a desidrogenase (DHA) e a catalase (CAT). Ambas as enzimas correlacionaramse negativamente com as concentrações de metais nos solos. A dimensão das populações indígenas de rizóbio nos solos contaminados (BD e BA) foi bastante baixa, 9,1 bactérias g-1 de solo e 7,3 bactérias g-1 de solo, respectivamente, quando em comparação com a população do solo BC (4,24x104 bactérias g-1 de solo). Estes resultados parecem estar relacionados com o elevado conteúdo em metais e com o pH ácido dos solos. A capacidade simbiótica também foi afectada pela presença de metais, uma vez que os isolados originários do solo BD mostraram menor capacidade em fixar azoto do que os isolados do solo controlo. A diversidade das populações de rizóbio foi determinada com recurso à análise dos perfis de plasmídeos, perfis de REP e ERIC-PCR de DNA genómico e perfis de proteínas e lipopolissacarídeos. No conjunto dos 35 isolados analisados foram identificados 11 plasmídeos com pesos moleculares entre 669 kb e 56 kb. Embora a incidência de plasmídeos tenha sido superior nos isolados do solo BC verificou-se maior diversidade plasmídica na população isolada do solo BD. Resultados similares foram obtidos com os perfis de REP e ERIC-PCR e perfis de proteínas, que indicaram maior diversidade nas populações dos solos contaminados (BD e BA), contrariamente ao verificado por outros autores. O grau de tolerância aos metais pesados e ao arsénio dos vários isolados testados dependeu do metal e do local de origem. No geral, os isolados do solo BD mostraram maior tolerância aos metais do que os isolados do solo controlo, o que está de acordo com o esperado uma vez que geralmente as populações dos locais contaminados são mais tolerantes. Contudo, os isolados do local mais contaminado (BA) foram muito tolerantes apenas ao chumbo mostrando-se sensíveis aos restantes metais. A inoculação dos solos BC, BD e BA após irradiação com estirpes seleccionadas de rizóbio permitiu avaliar a sua sobrevivência ao longo de 12 meses em condições mais realistas. Verificou-se que após um decréscimo inicial, os isolados inoculados no solo BC conseguiram recuperar a dimensão das suas populações para números similares aos inicialmente introduzidos, contrariamente ao verificado no solo BD onde o número de rizóbios decresceu ao longo dos 12 meses. As condições adversas do solo BA apenas permitiram a sobrevivência de 4 isolados até aos 3 meses e apenas dois deles conseguiram sobreviver após 12 meses, designadamente C 3-1 e A 17-3. Estes isolados possuem um plasmídeo de 669 kb que poderá estar na base da sobrevivência destas estirpes. Por outro lado, o último isolado é originário do solo contaminado e por isso estará também mais adaptado a sobreviver às elevadas concentrações de Pb existentes no solo BA. Por fim, constatou-se que o cádmio, um dos metais presente em concentrações mais elevadas nos solos em estudo, é um indutor de stresse oxidativo nos isolados de rizóbio menos tolerantes o que foi confirmado pelo aumento de ROS e danos celulares ao nível dos lípidos.
Resumo:
Em Portugal, as indústrias corticeira e de pasta de papel constituem um importante sector económico, contudo, gerando elevadas quantidades de subprodutos. Estes subprodutos poderiam ser explorados em aplicações de alto valor acrescentado, como fonte de compostos fenólicos, por exemplo, em vez de serem apenas queimados para produção de energia. Estes compostos são conhecidos pelas suas inúmeras propriedades, entre as quais, antioxidante, anti-inflamatória e anti-trombótica. Neste estudo as frações fenólicas da maior parte dos subprodutos gerados nas indústrias corticeira e de pasta de papel foram caracterizados em detalhe, com vista à sua valorização. A fração fenólica das cascas de Eucalyptus globulus, E. grandis, E. urograndis e E. maidenii, bem como da cortiça de Quercus suber e resíduos provenientes da sua exploração, nomeadamente, o pó de cortiça e os condensados negros, foi obtida por processos convencionais de extração sólido-líquido. No caso da casca de E. globulus, foi ainda avaliado o potencial de metodologias “verdes” no processo de extração de compostos fenólicos, usando extração com CO2 supercrítico. Esta técnica foi otimizada com recurso a metodologias de superfície de resposta. Na identificação e quantificação dos compostos fenólicos foi usada cromatografia líquida de alta resolução aliada a técnicas de espectrometria de massa. O teor de fenólicos totais foi ainda determinado pelo método de Folin- Ciocalteu, essencialmente para efeitos comparativos. A caracterização da fração fenólica de cada extrato foi ainda complementada com a análise da atividade antioxidante, usando o radical 2,2-difenil-1-picrilhidrazilo (DPPH). Foram identificados trinta compostos fenólicos na casca de E. globulus, 17 deles referenciados pela primeira vez como seus constituintes, nomeadamente os ácidos quínico, di-hidroxifenilacétic, cafeico e metil-elágico, bis-hexahidroxidifenoil( HHDP)-glucose, galoil- bis-HHDP-glucose, galoil-HHDPglucose, isoramnetina—hexosídeo, quercetina-hexosídeo, ácido metil-elágicopentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, mearnsetina, floridzina, mearnsetina-hexosídeo, luteolina e uma proantocianidina B. Neste trabalho, foi estudada pela primeira vez a composição fenólica das cascas de E. grandis, E. urograndis e E. maidenii. Treze, doze e vinte e quatro compostos fenólicos foram identificados nas cascas de E. grandis, E. urograndis e E. maidenii, respetivamente. Entre estes compostos encontram-se os ácidos quínico, gálico, metilgálico, protocatequínico, clorogénico e elágico, catequina, galoil-bis-HHDP-glucose, digaloilglucose, epicatequina, quercetina-glucoronídeo, di-hidroxiisopropilcromona- hexosídeo, isoramnetina-hexosídeo, ácido elágicoramnosídeo, taxifolina, quercetina-hexosídeo, di-hidroxi- (metilpropil)isopropilcromona-hexosídeo, ácido metil-elágico-pentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, aromadendrina-ramnosídeo, mearnsetina, mearnsetina-hexosídeo, eriodictiol, quercetina, isoramnetina e naringenina. A análise da fração fenólica da cortiça permitiu identificar vinte e dois compostos fenólicos, dez deles referenciados pela primeira vez como seus constituintes, nomeadamente, os ácidos quínico, salicílico, p-hidroxifenillático e metilgálico, ácido carboxílico da brevifolina, eriodictiol, naringenina, um éster isoprenílico do ácido cafeico, isoramnetina-ramnosídeo e isoramnetina. No pó de cortiça industrial foram identificados dezasseis compostos fenólicos, nomeadamente os ácidos quínico, gálico, protocatequínico, cafeico, ferúlico, elágico e metilgálico, esculetina, ácido carboxílico da brevifolina, coniferaldeído, um éster isoprenílico do ácido cafeico, uma dilactona do ácido valoneico, ácido elágico-pentosídeo, ácido elágico-ramnosídeo, isoramnetinaramnosídeo e isoramnetina. Destes, apenas o ácido elágico foi previamente referenciado como componente do pó de cortiça. Do mesmo modo, treze compostos fenólicos foram identificados no condensado negro, doze deles referenciados pela primeira vez como seus constituintes. São eles os ácidos quínico, gálico, p-hidroxifenil-láctico, protocatequínico, p-coumarico, cafeico e elágico, vanilina, esculetina, coniferaldeído, um éster isoprenílico do ácido cafeico e o eriodictiol. A extração supercrítica de compostos fenólicos da casca de eucalipto permitiu não só verificar os parâmetros que afetam a qualidade e quantidade finais dos extratos, como também obter os valores ótimos para estes parâmetros. Esta extração mostrou ainda ser bastante seletiva para determinados grupos de compostos fenólicos, como as flavanonas eriodictiol e naringenina e para o flavonol O-metilado isoramnetina. Este é também o primeiro estudo envolvendo a determinação da atividade antioxidante de extratos da cortiça e dos resíduos da sua exploração, bem como da casca de E. grandis, E. urograndis e E. maidenii. A vasta gama de compostos fenólicos identificados em cada extrato analisado, assim como as prominentes atividades antioxidantes, todas na mesma gama de valores do bem conhecido antioxidante comercial, ácido ascórbico, são claramente um grande contributo para a valorização destes subprodutos industriais.
Resumo:
This investigation focused on the development, test and validation of methodologies for mercury fractionation and speciation in soil and sediment. After an exhaustive review of the literature, several methods were chosen and tested in well characterised soil and sediment samples. Sequential extraction procedures that divide mercury fractions according to their mobility and potential availability in the environment were investigated. The efficiency of different solvents for fractionation of mercury was evaluated, as well as the adequacy of different analytical instruments for quantification of mercury in the extracts. Kinetic experiments to establish the equilibrium time for mercury release from soil or sediment were also performed. It was found that in the studied areas, only a very small percentage of mercury is present as mobile species and that mobility is associated to higher aluminium and manganese contents, and that high contents of organic matter and sulfur result in mercury tightly bound to the matrix. Sandy soils tend to release mercury faster that clayey soils, and therefore, texture of soil or sediment has a strong influence on the mobility of mercury. It was also understood that analytical techniques for quantification of mercury need to be further developed, with lower quantification limits, particularly for mercury quantification of less concentrated fractions: water-soluble e exchangeable. Although the results provided a better understanding of the distribution of mercury in the sample, the complexity of the procedure limits its applicability and robustness. A proficiency-testing scheme targeting total mercury determination in soil, sediment, fish and human hair was organised in order to evaluate the consistency of results obtained by different laboratories, applying their routine methods to the same test samples. Additionally, single extractions by 1 mol L-1 ammonium acetate solution, 0.1 mol L-1 HCl and 0.1 mol L-1 CaCl2, as well as extraction of the organometallic fraction were proposed for soil; the last was also suggested for sediment and fish. This study was important to update the knowledge on analytical techniques that are being used for mercury quantification, the associated problems and sources of error, and to improve and standardize mercury extraction techniques, as well as to implement effective strategies for quality control in mercury determination. A different, “non chemical-like” method for mercury species identification was developed, optimised and validated, based on the thermo-desorption of the different mercury species. Compared to conventional extraction procedures, this method has advantages: it requires little to no sample treatment; a complete identification of species present is obtained in less than two hours; mercury losses are almost neglectable; can be considered “clean”, as no residues are produced; the worldwide comparison of results obtained is easier and reliable, an important step towards the validation of the method. Therefore, the main deliverables of this PhD thesis are an improved knowledge on analytical procedures for identification and quantification of mercury species in soils and sediments, as well as a better understanding of the factors controlling the behaviour of mercury in these matrices.
Resumo:
The main purpose of this thesis is to investigate the potential of ionic liquids (ILs) as a new class of extractive solvents for added-value products from biomass. These include phenolic compounds (vanillin, gallic, syringic and vanillic acids), alkaloids (caffeine) and aminoacids (L-tryptophan). The interest on these natural compounds relies on the wide variety of relevant properties shown by those families and further application in the food, cosmetic and pharmaceutical industries. Aiming at developping more benign and effective extraction/purification techniques than those used, a comprehensive study was conducted using aqueous biphasic systems (ABS) composed of ILs and inorganic/organic salts. In addition, ILs were characterized by a polarity scale, using solvatochromic probes, aiming at providing prior indications on the ILs affinity for particular added-value products. Solid-liquid (S-L) extractions from biomass and using aqueous solution of ILs were also investigated. In particular, and applying and experimental factorial design to optimize the operational conditions, caffeine was extracted from guaraná seeds and spent coffee. With both types of extractions it was found that it is possible to recover the high-value compounds and to recycle the IL and salt solutions. Finally, aiming at exploring the recovery of added-value compounds from biomass using a simpler and more suistainable technique, the solubility of gallic acid, vanillin and caffeine was studied in aqueous solutions of several ILs and common salts. With the gathered results it was possible to demonstrate that ILs act as hydrotropes and that water can be used as an adequate antisolvent. This thesis describes the use of ILs towards the development of more effective and sustainable processes.