Social Cognition: New Insights from Affordance and Simon Effects

The perspective of the present project can be inscribed in the so-called “Social Cognition” framework, that in the last years moved from a focus on the individual mind toward embodied and participatory aspects of social understanding. Among the topics relevant for social cognition, the aim of the thesis was to shed more light on motor resonance and joint action, by using two well-known effects of cognitive psychology: “Affordance” and “Simon”. In the first part of the project, the Affordance effect has been considered, starting from Gibson to some post-Gibsonian theorizations. Particular attention has received the notion of “Micro-affordance”. The theoretical and empirical overview allows to understand how it can be possible to use the affordance effect to investigate the issue of motor resonance. A first study employed a priming paradigm and explored both in adults and school-age children the influence of a micro-affordance that can be defined dangerousness, and how motor resonance develops. The second part of the thesis focused on the Simon effect, starting with the presentation of the “stimulus–response (S–R) compatibility effect” to introduce the “Simon effect”. Particular attention has been dedicated to recent studies on the “joint Simon effect”. The reviewed empirical findings have been discussed in a wider theoretical perspective on joint action. The second study was aimed at investigating whether shared representations, as indexed by the presence of the joint Simon effect, are modulated by minimal ingroup–outgroup distinctions and by experienced interdependence between participants. The third study explored to what extent prior experience could modulate performance in task sharing, combining two paradigms of cognitive psychology, the joint Simon and the joint transfer-of-learning. In a general discussion the results obtained in the three studies have been summarized, emphasizing their original contribution and their importance within the Social Cognition research.

Die Vielseitigkeit von Carbazol in pi-konjugierten Materialien: Makrozyklen, Doppelstrang-Strukturen und Donor-Akzeptor-Copolymere

In dieser Arbeit wurden die vielfältigen Anwendungsmöglichkeiten von Carbazol-reichen Verbindungen in unterschiedlichen Architekturen von pi-konjugierten Materialien untersucht. Die Darstellung der Makrozyklen in Kapitel 1 erfolgte über eine templatunterstützte Synthese, da die ausschließlich über ihre para-Position verknüpften Einheiten einen Zugang über ihre Geometrie nicht erlaubten. Cyclododeca-2,7-fluoren wurde als zyklische Modellverbindung für die zahlreichen bekannten linearen Oligo- und Polyfluorene dargestellt, um den Einfluss der Ringstruktur auf die optischen Eigenschaften dieser blau emittierenden Verbindungen zu untersuchen. Motiviert von den geringen Ausbeuten bei der Zyklisierung des Rings unter Yamamoto-Bedingungen wurde nach einer alternativen Kupplungsreaktion gesucht, die den Zugang zu größeren Substanzmengen erlaubt. Die Einführung von terminalen Ethinylgruppen an die zu verknüpfenden Bausteine erlaubte über die Glaser-Eglinton-Reaktion nicht nur eine Verbesserung der Reaktionsausbeute um den Faktor 10, sondern gleichzeitig auch die Erweiterung des Durchmessers auf rund 5 nm. Demonstriert wurde dies anhand der Darstellung von Cyclo[tetrakis(2,7-diethinyltriscarbazol)] und Cyclo[tetrakis(2,7-diethinyltrisfluoren)].rnDer zweite Abschnitt der Dissertation befasste sich mit ausgedehnten zweidimensionalen Strukturen, zu denen auch mehrsträngige Polymere zählen. Für die Darstellung eines Doppelstrang-Polymers mit hoher Periodizität in den beiden in regelmäßigen Abständen verknüpften Strängen wurde ein neues Konzept entwickelt, dass den Zugang zu solchen Verbindungen erlauben sollte. Dieses basierte auf einem vierfach funktionalisierten Carbazol-Makromonomer. Die Polymerisationen wurden in zwei Schritten über Glaser-Eglinton-Reaktionen durchgeführt. Um unkontrollierte Kupplungen zu vermeiden, wurden zwei der vier reaktiven Positionen am Monomer zunächst über Schutzgruppen maskiert und nach der ersten Polymerisation wieder aktiviert. Neben diesem Ansatz über oxidative Ethinylkupplungen wurde auch eine Organometall-Variante mit einem Platin-Komplex im Polymerrückgrat vorgestellt. rnIm dritten Kapitel wurde die Darstellung von Donor-Akzeptor-Polymeren mit niedriger Bandlücke für den Einsatz in organischen Solarzellen besprochen. Im Gegensatz zu den bisherigen Ansätzen in der Literatur wurden hier ganz gezielt Donor- und Akzeptor-Einheiten mit einer Länge von mindestens 1,5 nm synthetisiert und kombiniert, um zu untersuchen, welche Auswirkungen der Einsatz solcher Makromonomere auf die Eigenschaften der Materialien hat. Dabei bestand der Akzeptor-Baustein in drei Polymeren aus Bis[2,7-di-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9,9,18,18-tetraoctylindeno[1,2-b]-yl]-indeno[1,2-b]fluoren-12,15-dion, während die Donor-Stärke durch den Übergang von einem reinen leiterverbrückten Carbazol-Monomer über eine gemischte Carbazol-Thiophen-Einheit hin zu einem reinen Thiophen-Precursor variiert wurde. Dabei zeigte das Polymer mit Thiophen als Donor den höchsten Zellwirkungsgrad von 0,41 %.rn

Shooter game 2d per piattaforme mobili

Obiettivo della tesi è quello di analizzare le diverse tecnologie messe a disposizioe dai dispositivi mobili, in particolare smartphon e tablet. Verranno analizzate le principali innovazioni portate da questi dispositivi nel campo dei videogiochi e verrà proposto un caso di sviluppo di Shooter game 2d multi piattaforma.

2D and 3D numerical modelling of multilayer detachment folding and salt tectonics

Numerical modelling was performed to study the dynamics of multilayer detachment folding and salt tectonics. In the case of multilayer detachment folding, analytically derived diagrams show several folding modes, half of which are applicable to crustal scale folding. 3D numerical simulations are in agreement with 2D predictions, yet fold interactions result in complex fold patterns. Pre-existing salt diapirs change folding patterns as they localize the initial deformation. If diapir spacing is much smaller than the dominant folding wavelength, diapirs appear in fold synclines or limbs.rnNumerical models of 3D down-building diapirism show that sedimentation rate controls whether diapirs will form and influences the overall patterns of diapirism. Numerical codes were used to retrodeform modelled salt diapirs. Reverse modelling can retrieve the initial geometries of a 2D Rayleigh-Taylor instability with non-linear rheologies. Although intermediate geometries of down-built diapirs are retrieved, forward and reverse modelling solutions deviate. rnFinally, the dynamics of fold-and-thrusts belts formed over a tilted viscous detachment is studied and it is demonstrated that mechanical stratigraphy has an impact on the deformation style, switching from thrust- to folding-dominated. The basal angle of the detachment controls the deformation sequence of the fold-and-thrust belt and results are consistent with critical wedge theory.rn

Traduction d'un texte de Tahar Ben Jelloun tiré du recueil pour une litterature-monde

In questo elaborato ho realizzato una breve analisi del concetto di 'Littérature-Monde' così come sostenuto da vari autori di lingua francese che rivendicano un mondo letterario più variegato e aperto, cosa che si realizzerebbe soprattutto nel pari riconoscimento tra scrittori francesi e scrittori francofoni: questi ultimi infatti sono stati per lungo tempo considerati ai margini della letteratura francese in quanto stranieri. Questa analisi è stata propedeutica per arrivare a capire il senso profondo del testo 'La cave de ma mémoire, le toit de ma maison sont des mots français' di Tahar Ben Jelloun, tratto dalla raccolta di testi "Pour une littérature-monde", che ho poi tradotto dal francese all'italiano.

Metodi numerici di regolarizzazione per l'inversione 2d di dati di risonanza magnetica nucleare

Molte applicazioni sono legate a tecniche di rilassometria e risonanza magnetica nucleare (NMR). Tali applicazioni danno luogo a problemi di inversione della trasformata di Laplace discreta che è un problema notoriamente mal posto. UPEN (Uniform Penalty) è un metodo numerico di regolarizzazione utile a risolvere problemi di questo tipo. UPEN riformula l’inversione della trasformata di Laplace come un problema di minimo vincolato in cui la funzione obiettivo contiene il fit di dati e una componente di penalizzazione locale, che varia a seconda della soluzione stessa. Nella moderna spettroscopia NMR si studiano le correlazioni multidimensionali dei parametri di rilassamento longitudinale e trasversale. Per studiare i problemi derivanti dall’analisi di campioni multicomponenti è sorta la necessità di estendere gli algoritmi che implementano la trasformata inversa di Laplace in una dimensione al caso bidimensionale. In questa tesi si propone una possibile estensione dell'algoritmo UPEN dal caso monodimensionale al caso bidimensionale e si fornisce un'analisi numerica di tale estensione su dati simulati e su dati reali.

A comparison between 2D and 3D cephalometry on CBCT scans of human skulls

The purpose of this study was to evaluate whether measurements on conventional cephalometric radiographs are comparable with 3D measurements on 3D models of human skulls, derived from cone beam CT (CBCT) data. A CBCT scan and a conventional cephalometric radiograph were made of 40 dry skulls. Standard cephalometric software was used to identify landmarks on both the 2D images and the 3D models. The same operator identified 17 landmarks on the cephalometric radiographs and on the 3D models. All images and 3D models were traced five times with a time-interval of 1 week and the mean value of repeated measurements was used for further statistical analysis. Distances and angles were calculated. Intra-observer reliability was good for all measurements. The reproducibility of the measurements on the conventional cephalometric radiographs was higher compared with the reproducibility of measurements on the 3D models. For a few measurements a clinically relevant difference between measurements on conventional cephalometric radiographs and 3D models was found. Measurements on conventional cephalometric radiographs can differ significantly from measurements on 3D models of the same skull. The authors recommend that 3D tracings for longitudinal research are not used in cases were there are only 2D records from the past.

Single fluoroscopic image based 2D/3D reconstruction of a scaled, patient-specific vertebral model

Purpose Accurate three-dimensional (3D) models of lumbar vertebrae can enable image-based 3D kinematic analysis. The common approach to derive 3D models is by direct segmentation of CT or MRI datasets. However, these have the disadvantages that they are expensive, timeconsuming and/or induce high-radiation doses to the patient. In this study, we present a technique to automatically reconstruct a scaled 3D lumbar vertebral model from a single two-dimensional (2D) lateral fluoroscopic image. Methods Our technique is based on a hybrid 2D/3D deformable registration strategy combining a landmark-to-ray registration with a statistical shape model-based 2D/3D reconstruction scheme. Fig. 1 shows different stages of the reconstruction process. Four cadaveric lumbar spine segments (total twelve lumbar vertebrae) were used to validate the technique. To evaluate the reconstruction accuracy, the surface models reconstructed from the lateral fluoroscopic images were compared to the associated ground truth data derived from a 3D CT-scan reconstruction technique. For each case, a surface-based matching was first used to recover the scale and the rigid transformation between the reconstructed surface model Results Our technique could successfully reconstruct 3D surface models of all twelve vertebrae. After recovering the scale and the rigid transformation between the reconstructed surface models and the ground truth models, the average error of the 2D/3D surface model reconstruction over the twelve lumbar vertebrae was found to be 1.0 mm. The errors of reconstructing surface models of all twelve vertebrae are shown in Fig. 2. It was found that the mean errors of the reconstructed surface models in comparison to their associated ground truths after iterative scaled rigid registrations ranged from 0.7 mm to 1.3 mm and the rootmean squared (RMS) errors ranged from 1.0 mm to 1.7 mm. The average mean reconstruction error was found to be 1.0 mm. Conclusion An accurate, scaled 3D reconstruction of the lumbar vertebra can be obtained from a single lateral fluoroscopic image using a statistical shape model based 2D/3D reconstruction technique. Future work will focus on applying the reconstructed model for 3D kinematic analysis of lumbar vertebrae, an extension of our previously-reported imagebased kinematic analysis. The developed method also has potential applications in surgical planning and navigation.