Long wave generation by the shoaling and breaking of transient wave groups on a beach

This paper presents new laboratory data on the generation of long waves by the shoaling and breaking of transient-focused short-wave groups. Direct offshore radiation of long waves from the breakpoint is shown experimentally for the first time. High spatial resolution enables identification of the relationship between the spatial gradients of the short-wave envelope and the long-wave surface. This relationship is consistent with radiation stress theory even well inside the surf zone and appears as a result of the strong nonlinear forcing associated with the transient group. In shallow water, the change in depth across the group leads to asymmetry in the forcing which generates significant dynamic setup in front of the group during shoaling. Strong amplification of the incident dynamic setup occurs after short-wave breaking. The data show the radiation of a transient long wave dominated by a pulse of positive elevation, preceded and followed by weaker trailing waves with negative elevation. The instantaneous cross-shore structure of the long wave shows the mechanics of the reflection process and the formation of a transient node in the inner surf zone. The wave run-up and relative amplitude of the radiated and incident long waves suggests significant modification of the incident bound wave in the inner surf zone and, the dominance of long waves generated by the breaking process. It is proposed that these conditions occur when the primary short waves and bound wave are not shallow water waves at the breakpoint. A simple criterion is given to determine these conditions, which generally occur for the important case of storm waves.

Pattern and correlates of inpatient admission during the initial acute phase of first-episode psychosis

Objectives: The first aim of this study was to examine the rate, pattern and correlates of inpatient admission during the first 3 months of treatment for first-episode psychosis (FEP). The second aim was to determine whether the pattern of inpatient admission during this period was associated with remission of psychotic symptoms or inpatient service use at 15-month follow-up. Method: One hundred and four consecutive patients with FEP at a specialist treatment service were approached to participate in a follow-up study. Patients were grouped on the basis of the pattern of inpatient admission (none, one, or multiple) during the first 3 months of treatment. Clinical ratings at baseline and 3-month follow-up, and ratings of remission of psychotic symptoms at 3 and 15-month follow-up, were available for two-thirds of the patients. Inpatient data for the 15-month follow-up period were derived from an electronic database for most patients (n = 98). Results: Eighty (76.9%) of the 104 patients were admitted to an inpatient unit during the first 3 months of treatment. Fifty-nine (56.7%) patients had a single admission and 21 (20.2%) had multiple admissions. At baseline, inpatient admission was associated with a diagnosis of affective psychosis and more severe behavioural and functional disturbance but not positive psychotic symptoms. Multiple admissions were associated with risks to self or others at baseline and 3-month follow-up, and lack of remission of positive symptoms at 3 and 15-month follow-up. There was no association between the pattern of inpatient admission during the initial 3-month period and inpatient service use during the following 12-month period. Conclusions: The substantial proportion of young patients with FEP admitted to hospital emphasizes the need for youth-friendly treatment environments and practices. Although patients with multiple admissions during the initial treatment period are less likely to achieve remission, these patients are no more likely to establish a pattern of revolving-door hospitalizations compared with other patients.

S. cerevisiae as a model for studying mutations in the human gene OPA1 associated with dominant optic atrophy and for drug discovery

L’atrofia ottica dominante (ADOA) è una malattia mitocondriale caratterizzata da difetti visivi, che si manifestano durante l’infanzia, causati da progressiva degenerazione delle cellule gangliari della retina (RGC). ADOA è una malattia genetica associata, nella maggior parte dei casi, a mutazioni nel gene OPA1 che codifica per la GTPasi mitocondriale OPA1, appartenente alla famiglia delle dinamine, principalmente coinvolta nel processo di fusione mitocondriale e nel mantenimento del mtDNA. Finora sono state identificate più di 300 mutazioni patologiche nel gene OPA1. Circa il 50% di queste sono mutazioni missenso, localizzate nel dominio GTPasico, che si pensa agiscano come dominanti negative. Questa classe di mutazioni è associata ad una sindrome più grave nota come “ADOA-plus”. Nel lievito Saccharomyces cerevisiae MGM1 è l’ortologo del gene OPA1: nonostante i due geni abbiano domini funzionali identici le sequenze amminoacidiche sono scarsamente conservate. Questo costituisce una limitazione all’uso del lievito per lo studio e la validazione di mutazioni patologiche nel gene OPA1, infatti solo poche sostituzioni possono essere introdotte e studiate nelle corrispettive posizioni del gene di lievito. Per superare questo ostacolo è stato pertanto costruito un nuovo modello di S. cerevisiae, contenente il gene chimerico MGM1/OPA1, in grado di complementare i difetti OXPHOS del mutante mgm1Δ. Questo gene di fusione contiene una larga parte di sequenza corrispondente al gene OPA1, nella quale è stato inserito un set di nuove mutazioni trovate in pazienti affetti da ADOA e ADOA-plus. La patogenicità di queste mutazioni è stata validata sia caratterizzando i difetti fenotipici associati agli alleli mutati, sia la loro dominanza/recessività nel modello di lievito. A tutt’oggi non è stato identificato alcun trattamento farmacologico per la cura di ADOA e ADOA-plus. Per questa ragione abbiamo utilizzato il nostro modello di lievito per la ricerca di molecole che agiscono come soppressori chimici, ossia composti in grado di ripristinare i difetti fenotipici indotti da mutazioni nel gene OPA1. Attraverso uno screening fenotipico high throughput sono state testate due differenti librerie di composti chimici. Questo approccio, noto con il nome di drug discovery, ha permesso l’identificazione di 23 potenziali molecole attive.

FORMAÇÃO CONTINUADA DE PROFESSORES ALFABETIZADORES: COMO APRENDE O PROFESSOR?

Este estudo versa sobre a análise do processo de aprendizagem de alguns professores alfabetizadores da Rede Estadual de Educação de São Paulo e buscou compreender onde e como este grupo de profissionais aprende os conteúdos necessários para alfabetizar na perspectiva da construção de conhecimento. A hipótese que orienta esta análise é a de que um professor bem-formado tem mais condição de intervir na aprendizagem de seus alunos e, gradativamente, contribuir para a garantia do direito de todas as crianças se alfabetizarem. Parte também da hipótese de que, compreendendo o processo de aprendizagem destes educadores, as ações de formação podem ser mais eficazes. Por meio de pesquisa empírica, revisão bibliográfica e análise documental, esta dissertação organiza-se da seguinte forma: na Introdução é anunciada a trajetória profissional da proponente e sua relação com os programas de alfabetização e com as propostas de formação de educadores das Redes Públicas de Educação de São Paulo. O primeiro Capítulo tece a fundamentação teórica na qual os programas de formação de professores alfabetizadores de São Paulo são organizados. No segundo Capítulo é realizado um breve histórico sobre os programas de formação de professores alfabetizadores da Rede Estadual de Ensino, no período de 1984 a 2010, com uma análise sobre a coerência entre as concepções de ensino e aprendizagem, e as concepções que embasam os diferentes programas institucionais. No terceiro Capítulo são descritos os caminhos percorridos no processo de realização da pesquisa empírica. Nas Considerações Finais foram retomadas, em síntese, as discussões realizadas no desenvolvimento dos capítulos, recuperando a essência das análises a partir dos dados coletados, expressando os resultados da investigação. Foram aplicados questionários de perfil e realizadas entrevistas com 13 sujeitos envolvidos com o Programa Ler e Escrever da Rede Estadual de Ensino de São Paulo, envolvendo desde professores alfabetizadores até os organizadores do Programa. A fundamentação teórica deste estudo ocorreu, principalmente, a partir das contribuições de Piaget (1967); Ferreiro e Teberosky (1985); Ferreiro (1989; 1992; 2002; 2007); Becker (1993); Coll (1992); Lerner (2002) que se orientam pela concepção de construção de conhecimento e tratam da aprendizagem da leitura e escrita, da formação do professor e da didática da alfabetização e da Matemática; e Alarcão (2008), Lerner (2002) e Tardif (2002) que abordam a formação docente. A análise dos dados foi realizada a partir da fundamentação e dos procedimentos de Análise Temática do Conteúdo, conforme Bardin (2008) que resultou na elaboração de apreciações de condições que devem ser consideradas na formação de professores alfabetizadores. Os resultados obtidos apontam para algumas inferências sobre o processo de aprendizagem dos professores alfabetizadores que, se consideradas nas propostas, podem contribuir para a maior eficiência dos programas de formação, resultando em melhor apropriação pelos professores dos conteúdos envolvidos na alfabetização, na melhoria da qualidade da aprendizagem dos alfabetizandos e, consequentemente, na formação de leitores plenos e escritores eficientes.

Transcriptome analysis of a respiratory Saccharomyces cerevisiae strain suggests the expression of its phenotype is glucose insensitive and predominantly controlled by Hap4, Cat8 and Mig1

BACKGROUND: We previously described the first respiratory Saccharomyces cerevisiae strain, KOY.TM6*P, by integrating the gene encoding a chimeric hexose transporter, Tm6*, into the genome of an hxt null yeast. Subsequently we transferred this respiratory phenotype in the presence of up to 50 g/L glucose to a yeast strain, V5 hxt1-7Delta, in which only HXT1-7 had been deleted. In this study, we compared the transcriptome of the resultant strain, V5.TM6*P, with that of its wild-type parent, V5, at different glucose concentrations. RESULTS: cDNA array analyses revealed that alterations in gene expression that occur when transitioning from a respiro-fermentative (V5) to a respiratory (V5.TM6*P) strain, are very similar to those in cells undergoing a diauxic shift. We also undertook an analysis of transcription factor binding sites in our dataset by examining previously-published biological data for Hap4 (in complex with Hap2, 3, 5), Cat8 and Mig1, and used this in combination with verified binding consensus sequences to identify genes likely to be regulated by one or more of these. Of the induced genes in our dataset, 77% had binding sites for the Hap complex, with 72% having at least two. In addition, 13% were found to have a binding site for Cat8 and 21% had a binding site for Mig1. Unexpectedly, both the up- and down-regulation of many of the genes in our dataset had a clear glucose dependence in the parent V5 strain that was not present in V5.TM6*P. This indicates that the relief of glucose repression is already operable at much higher glucose concentrations than is widely accepted and suggests that glucose sensing might occur inside the cell. CONCLUSION: Our dataset gives a remarkably complete view of the involvement of genes in the TCA cycle, glyoxylate cycle and respiratory chain in the expression of the phenotype of V5.TM6*P. Furthermore, 88% of the transcriptional response of the induced genes in our dataset can be related to the potential activities of just three proteins: Hap4, Cat8 and Mig1. Overall, our data support genetic remodelling in V5.TM6*P consistent with a respiratory metabolism which is insensitive to external glucose concentrations.

Scale-up in emulsion polymerisation

The procedure for successful scale-up of batchwise emulsion polymerisation has been studied. The relevant literature on liquid-liquid dispersion on scale-up and on emulsion polymerisation has been crit1cally reviewed. Batchwise emulsion polymerisation of styrene in a specially built 3 litre, unbaffled, reactor confirmed that impeller speed had a direct effect on the latex particle size and on the reaction rate. This was noted to be more significant at low soap concentrations and the phenomenon was related to the depletion of micelle forming soap by soap adsorption onto the monomer emulsion surface. The scale-up procedure necessary to maintain constant monomer emulsion surface area in an unbaffled batch reactor was therefore investigated. Three geometrically similar 'vessels of 152, 229 and 305mm internal diameter, and a range of impeller speeds (190 to 960 r.p.m.) were employed. The droplet sizes were measured either through photomicroscopy or via a Coulter Counter. The power input to the impeller was also measured. A scale-up procedure was proposed based on the governing relationship between droplet diameter, impeller speed and impeller diameter. The relationships between impeller speed soap concentration, latex particle size and reaction rate were investigated in a series of polymerisations employing an amended commercial recipe for polystyrene. The particle size was determined via a light transmission technique. Two computer models, based on the Smith and Ewart approach but taking into account the adsorption/desorption of soap at the monomer surface, were successful 1n predicting the particle size and the progress of the reaction up to the end of stage II, i.e. to the end of the period of constant reaction rate.

Estimating additionality and leverage:between public and private sector equity finance in Ireland (2000 – 2002)

This paper aims to contribute to the debate about the role of the public sector in stimulating greater use of private sector equity for business start-up and growth in two ways. First, to examine the extent to which the provision of public sector equity finance enables individual firms to raise additional funds in the private sector market place. Second, to consider the methodological implications for an economic impact assessment of industrial policy interventions (especially those which include an equity component) at the level of the individual firm. We assess the extent to which there may be indirect positive effects (externalities) associated with public sector financial assistance to individual firms and if so how they distort standard evaluation methodologies designed to estimate the level of additionality of that support. The paper draws upon the results of a recent study of the impact of Enterprise Ireland (EI) financial assistance to indigenous Irish industry in the period 2000 to 2002. The paper demonstrates that a process of re-calibration is necessary in estimates of economic impact in order to account for these positive externalities and the result in this study was a ‘boost’ to additionality. In operational and conceptual terms, the study underlines the importance of the relationship between private and public sector sources of equity finance as an important dynamic in the attempt by industrial and regional policy to stimulate the number of firms with viable investment proposals accessing external equity finance.

A genetic algorithm approach to optimising component placement and retrieval sequence for chip shooter machines

A chip shooter machine in printed circuit board (PCB) assembly has three movable mechanisms: an X-Y table carrying a PCB, a feeder carrier with several feeders holding components and a rotary turret with multiple assembly heads to pick up and place components. In order to get the minimal placement or assembly time for a PCB on the machine, all the components on the board should be placed in a perfect sequence, and the components should be set up on a right feeder, or feeders since two feeders can hold the same type of components, and additionally, the assembly head should retrieve or pick up a component from a right feeder. The entire problem is very complicated, and this paper presents a genetic algorithm approach to tackle it.

WASOP, a qualitative methodology for waste minimization: systems thinking, HAZOP principles and nuclear waste

Purpose – The international nuclear community continues to face the challenge of managing both the legacy waste and the new wastes that emerge from ongoing energy production. The UK is in the early stages of proposing a new convention for its nuclear industry, that is: waste minimisation through closely managing the radioactive source which creates the waste. This paper proposes a new technique (called waste and source material operability study (WASOP)) to qualitatively analyse a complex, waste-producing system to minimise avoidable waste and thus increase the protection to the public and the environment. Design/methodology/approach – WASOP critically considers the systemic impact of up and downstream facilities on the minimisation of nuclear waste in a facility. Based on the principles of HAZOP, the technique structures managers' thinking on the impact of mal-operations in interlinking facilities in order to identify preventative actions to reduce the impact on waste production of those mal-operations.' Findings – WASOP was tested with a small group of experienced nuclear regulators and was found to support their qualitative examination of waste minimisation and help them to work towards developing a plan of action. Originality/value – Given the newness of this convention, the wider methodology in which WASOP sits is still in development. However, this paper communicates the latest thinking from nuclear regulators on decision-making methodology for supporting waste minimisation and is hoped to form part of future regulatory guidance. WASOP is believed to have widespread potential application to the minimisation of many other forms of waste, including that from other energy sectors and household/general waste.

Analysis and simulation of computer controlled cellular mobile radio systems

Cellular mobile radio systems will be of increasing importance in the future. This thesis describes research work concerned with the teletraffic capacity and the canputer control requirements of such systems. The work involves theoretical analysis and experimental investigations using digital computer simulation. New formulas are derived for the congestion in single-cell systems in which there are both land-to-mobile and mobile-to-mobile calls and in which mobile-to-mobile calls go via the base station. Two approaches are used, the first yields modified forms of the familiar Erlang and Engset formulas, while the second gives more complicated but more accurate formulas. The results of computer simulations to establish the accuracy of the formulas are described. New teletraffic formulas are also derived for the congestion in multi -cell systems. Fixed, dynamic and hybrid channel assignments are considered. The formulas agree with previously published simulation results. Simulation programs are described for the evaluation of the speech traffic of mobiles and for the investigation of a possible computer network for the control of the speech traffic. The programs were developed according to the structured progranming approach leading to programs of modular construction. Two simulation methods are used for the speech traffic: the roulette method and the time-true method. The first is economical but has some restriction, while the second is expensive but gives comprehensive answers. The proposed control network operates at three hierarchical levels performing various control functions which include: the setting-up and clearing-down of calls, the hand-over of calls between cells and the address-changing of mobiles travelling between cities. The results demonstrate the feasibility of the control netwvork and indicate that small mini -computers inter-connected via voice grade data channels would be capable of providing satisfactory control

A methodology for analysis and control of discrete event dynamic systems

The rapid developments in computer technology have resulted in a widespread use of discrete event dynamic systems (DEDSs). This type of system is complex because it exhibits properties such as concurrency, conflict and non-determinism. It is therefore important to model and analyse such systems before implementation to ensure safe, deadlock free and optimal operation. This thesis investigates current modelling techniques and describes Petri net theory in more detail. It reviews top down, bottom up and hybrid Petri net synthesis techniques that are used to model large systems and introduces on object oriented methodology to enable modelling of larger and more complex systems. Designs obtained by this methodology are modular, easy to understand and allow re-use of designs. Control is the next logical step in the design process. This thesis reviews recent developments in control DEDSs and investigates the use of Petri nets in the design of supervisory controllers. The scheduling of exclusive use of resources is investigated and an efficient Petri net based scheduling algorithm is designed and a re-configurable controller is proposed. To enable the analysis and control of large and complex DEDSs, an object oriented C++ software tool kit was developed and used to implement a Petri net analysis tool, Petri net scheduling and control algorithms. Finally, the methodology was applied to two industrial DEDSs: a prototype can sorting machine developed by Eurotherm Controls Ltd., and a semiconductor testing plant belonging to SGS Thomson Microelectronics Ltd.

The use of flow control devices to improve the flow pattern and throughput of sieve trays

Compared to packings trays are more cost effective column internals because they create a large interfacial area for mass transfer by the interaction of the vapour on the liquid. The tray supports a mass of froth or spray which on most trays (including the most widely used sieve trays) is not in any way controlled. The two important results of the gas/liquid interaction are the tray efficiency and the tray throughput or capacity. After many years of practical experience, both may be predicted by empirical correlations, despite the lack of understanding. It is known that the tray efficiency is in part determined by the liquid flow pattern and the throughput by the liquid froth height which in turn depends on the liquid hold-up and vapour velocity. This thesis describes experimental work on sieve trays in an air-water simulator, 2.44 m in diameter. The liquid flow pattern, for flow rates similar to those used in commercial scale distillation, was observed experimentally by direct observation; by water-cooling, to simulate mass transfer; use of potassium permanganate dye to observe areas of longer residence time; and by height of clear liquid measurements across the tray and in the downcomer using manometers. This work presents experiments designed to evaluate flow control devices proposed to improve the gas liquid interaction and hence improve the tray efficiency and throughput. These are (a) the use of intermediate weirs to redirect liquid to the sides of the tray so as to remove slow moving/stagnant liquid and (b) the use of vapour-directing slots designed to use the vapour to cause liquid to be directed towards the outlet weir thus reducing the liquid hold-up at a given rate i.e. increased throughput. This method also has the advantage of removing slow moving/stagnant liquid. In the experiments using intermediate weirs, which were placed in the centre of the tray. it was found that in general the effect of an intermediate weir depends on the depth of liquid downstream of the weir. If the weir is deeper than the downstream depth it will cause the upstream liquid to be deeper than the downstream liquid. If the weir is not as deep as deep as the downstream depth it may have little or no effect on the upstream depth. An intermediate weir placed at an angle to the direction of flow of liquid increases the liquid towards the sides of the tray without causing an increase in liquid hold-up/ froth height. The maximum proportion of liquid caused to flow sideways by the weir is between 5% and 10%. Experimental work using vapour-directing slots on a rectangular sieve tray has shown that the horizontal momentum that is imparted to the liquid is dependent upon the size of the slot. If too much momentum is transferred to the liquid it causes hydraulic jumps to occur at the mouth of the slot coupled with liquid being entrained, The use of slots also helps to eliminate the hydraulic gradient across sieve trays and provides a more uniform froth height on the tray. By comparing the results obtained of the tray and point efficiencies, it is shown that a slotted tray reduces both values by approximately 10%. This reduction is due to the fact that with a slotted tray the liquid has a reduced residence time Ion the tray coupled also with the fact that large size bubbles are passing through the slots. The effectiveness of using vapour-directing slots on a full circular tray was investigated by using dye to completely colour the biphase. The removal of the dye by clear liquid entering the tray was monitored using an overhead camera. Results obtained show that the slots are successful in their aim of reducing slow moving liquid from the sides of the tray, The net effect of this is an increase in tray efficiency. Measurements of slot vapour-velocity found it to be approximately equal to the hole velocity.

Rolling bearing vibrations: the effects of varying compliance, manufacturing tolerances and wear

In this study some common types of Rolling Bearing vibrations are analysed in depth both theoretically and experimentally. The study is restricted to vibrations in the radial direction of bearings having pure radial load and a positive radial clearance. The general vibrational behaviour of such bearings has been investigated with respect to the effects of varying compliance, manufacturing tolerances and the interaction between the bearing and the machine structure into which it is fitted. The equations of motion for a rotor supported by a bearing in which the stiffness varies with cage position has been set up and examples of solutions,obtained by digital simulation. is given. A method to calculate amplitudes and frequencies of vibration components due to out of roundness of the inner ring and varying roller diameters has been developed. The results from these investigations have been combined with a theory for bearing/machine frame interaction using mechanical impedance technique, thereby facilitating prediction of the vibrational behaviour of the whole set up. Finally. the effects of bearing fatigue and wear have been studied with particular emphasis on the use of vibration analysis for condition monitoring purposes. A number of monitoring methods have been tried and their effectiveness discussed. The experimental investigation was carried out using two purpose built rigs. For the purpose of analysis of the experimental measurements a digital mini computer was adapted for signal processing and a suite of programs was written. The program package performs several of the commonly used signal analysis processes and :include all necessary input and output functions.

Lubrication efficiency and die design in wire drawing

With the competitive challenge facing business today, the need to keep cost down and quality up is a matter of survival. One way in which wire manufacturers can meet this challenge is to possess a thorough understanding of deformation, friction and lubrication during the wire drawing process, and therefore to make good decisions regarding the selection and application of lubricants as well as the die design. Friction, lubrication and die design during wire drawing thus become the subject of this study. Although theoretical and experimental investigations have been being carried out ever since the establishment of wire drawing technology, many problems remain unsolved. It is therefore necessary to conduct further research on traditional and fundamental subjects such as the mechanics of deformation, friction, lubrication and die design in wire drawing. Drawing experiments were carried out on an existing bull-block under different cross-sectional area reductions, different speeds and different lubricants. The instrumentation to measure drawing load and drawing speed was set up and connected to the wire drawing machine, together with a data acquisition system. A die box connected to the existing die holder for using dry soap lubricant was designed and tested. The experimental results in terms of drawing stress vs percentage area reduction curves under different drawing conditions were analysed and compared. The effects on drawing stress of friction, lubrication, drawing speed and pressure die nozzle are discussed. In order to determine the flow stress of the material during deformation, tensile tests were performed on an Instron universal test machine, using the wires drawn under different area reductions. A polynomial function is used to correlate the flow stress of the material with the plastic strain, on which a general computer program has been written to find out the coefficients of the stress-strain function. The residual lubricant film on the steel wire after drawing was examined both radially and longitudinally using an SEM and optical microscope. The lubricant film on the drawn wire was clearly observed. Therefore, the micro-analysis by SEM provides a way of friction and lubrication assessment in wire drawing.

Access to start up finance for ethnic minority graduate entrepreneurs in the West Midlands: a gendered perspective

This aim of this paper, from a study funded by the National Council for Graduate Entrepreneurship (NCGE), is to explore access to finance for ethnic minority graduate entrepreneurs (EMGEs) with a particular focus on comparisons between different ethnic groups, and men and women. The authors interviewed selected individuals based upon a review of literature on finance for ethnic minority enterprise. A number of key results from the survey, in that EMGEs: • use external finance significantly (more so than non graduates) and encounter barriers in accessing finance at start-up, in particular those belonging to poor families. • rely excessively on personal savings and family finance, at the start-up and long after the start-up stage, that has implications for the optimal capital structure. • start up businesses that are, on average, larger than non-graduate enterprises and have the potential to reduce economic inactivity amongst the ethnic population. • have, in contrast to general graduate start-ups, a high level of unemployment, take a longer period of time to enter employment and there is a higher level of dissatisfaction with career progression. These findings raise the question whether the right financial advice is taken and whether this behaviour constrains EMGEs' expansion.