Influence of spawning procedure on gametes fertilization success in Salminus hilarii Valenciennes, 1850 (Teleostei: Characidae): Implications for the conservation of this species

Artificial reproduction and gamete fertilization were evaluated in Salminus hilarii wild and domesticated broodstocks. Wild and domesticated broodstocks were artificially induced to reproduction using a carp pituitary treatment. Four groups were considered: Group 1 (G1), fish caught in the wild maintained for three years in the same conditions as the domesticated broodstocks and spawned naturally; Group 2 (G2), broodstock born and raised in captivity and spawned naturally; Group 3 (G3), wild broodstocks, which were manually stripped for gamete collection and dry fertilization; and Group 4 (G4), domesticated males and females, also manually stripped. Oocytes, eggs, and larvae were sampled at different time intervals throughout embryonic development. Yolk sac absorption occurred approximately 24-29 h after hatching. Twenty-six h after hatching, the larvae mouths opened. Cannibalism was identified just 28-30 h after hatching. There was no morphological difference in embryonic development among all groups. The number of released eggs per gram of female was: G1: 83.3 ± 24.5 and G2: 103.8 ± 37.4; however, the fertilization success was lower in G2 (42.0 ± 6.37 %) compared with G1 (54.7 ± 3.02%) (P = 0.011). Hand-stripping of oocytes was not successful and the fertilization rate was zero. The reproduction of this species in captivity is viable, but it is necessary to improve broodstock management to enhance fertilization rates and obtain better fingerling production for restocking programs.

Inbreeding levels in Northeast Brazil: strategies for the prospecting of new genetic disorders

A new autosomal recessive genetic condition, the SPOAN syndrome (an acronym for spastic paraplegia, optic atrophy and neuropathy syndrome), was recently discovered in an isolated region of the State of Rio Grande do Norte in Northeast Brazil, in a population that was identified by the IBGE (Brazilian Institute of Geography and Statistics) as belonging to the Brazilian communities with the highest rates of "deficiencies" (Neri, 2003), a term used to describe diseases, malformations, and handicaps in general. This prompted us to conduct a study of consanguinity levels in five of its municipal districts by directly interviewing their inhabitants. Information on 7,639 couples (corresponding to about 40% of the whole population of the studied districts) was obtained. The research disclosed the existence of very high frequencies of consanguineous marriages, which varied from about 9% to 32%, suggesting the presence of a direct association between genetic diseases such as the SPOAN syndrome, genetic drift and inbreeding levels. This fact calls for the introduction of educational programs for the local populations, as well as for further studies aiming to identify and characterize other genetic conditions. Epidemiological strategies developed to collect inbreeding data, with the collaboration of health systems available in the region, might be very successful in the prospecting of genetic disorders.

Array-CGH testing in spontaneous abortions with normal karyotypes

In about 50% of first trimester spontaneous abortion the cause remains undetermined after standard cytogenetic investigation. We evaluated the usefulness of array-CGH in diagnosing chromosome abnormalities in products of conception from first trimester spontaneous abortions. Cell culture was carried out in short- and long-term cultures of 54 specimens and cytogenetic analysis was successful in 49 of them. Cytogenetic abnormalities (numerical and structural) were detected in 22 (44.89%) specimens. Subsequent, array-CGH based on large insert clones spaced at ~1 Mb intervals over the whole genome was used in 17 cases with normal G-banding karyotype. This revealed chromosome aneuplodies in three additional cases, giving a final total of 51% cases in which an abnormal karyotype was detected. In keeping with other recently published works, this study shows that array-CGH detects abnormalities in a further ~10% of spontaneous abortion specimens considered to be normal using standard cytogenetic methods. As such, array-CGH technique may present a suitable complementary test to cytogenetic analysis in cases with a normal karyotype.

Doença granulomatosa crônica: diagnóstico no primeiro episódio infeccioso

OBJETIVO: Relatar caso ilustrativo de doença granulomatosa crônica cujo diagnóstico ocorreu durante o aparecimento do primeiro episódio infeccioso, colaborando com a iniciativa do Brazilian Group for Immunodeficiency para a sensibilização do pediatra geral em relação ao diagnóstico precoce das imunodeficiências primárias, o que está associado a melhor qualidade de vida e maior sobrevida desses indivíduos. DESCRIÇÃO DE CASO: Paciente do sexo masculino, 39 dias de vida, admitido em pronto-socorro pediátrico por febre alta há cinco dias e irritabilidade. No dia seguinte, observou-se abscesso cervical, isolando-se Staphylococcus aureus comunitário. Durante a internação, ocorreram outros abscessos superficiais e em cadeias ganglionares profundas, além de resposta lenta aos antimicrobianos. Solicitou-se investigação para imunodeficiências, que confirmou a hipótese de doença granulomatosa crônica por quantificação dos ânions superóxido e teste de redução do nitrobluetetrazolio. Paciente foi encaminhado a serviço especializado, no qual identificou-se doador de medula óssea compatível, realizando-se o transplante seis meses após o diagnóstico. Quatro meses após o transplante, ocorreu normalização do burst oxidativo, indicando sucesso. COMENTÁRIOS: O paciente mostrou apresentação típica da doença, o que permitiu seu diagnóstico por pediatras gerais já na primeira infecção, tendo como consequência o acompanhamento por especialistas em imunodeficiências primárias, a introdução da profilaxia antimicrobiana e a procura bem sucedida de doador de medula HLA-compatível.

Perspectives of vaccination in Chagas disease revisited

The perspectives for a Chagas Disease vaccine 30 years ago and today are compared. Antigens and adjuvants have improved, but logistic problems remain the same. Sterilizing vaccines have not been produced and animal models for chronic Chagas have not been developed. Vector control has been successful and Chagas incidence has come to a halt. We do not have a population candidate to vaccination now in Brazil. And if we had, we would not know how to evaluate the success of vaccination in a short time period. A vaccine may not seem important at the moment. However, scientific reasons and incertitudes about the future recommend that a search for a vaccine be continued.

Mineralogical characterization of a highly-weathered soil by the Rietveld Method

The mineralogical characterization through mineral quantification of Brazilian soils by X-ray diffraction data using the Rietveld Method is not common. A mineralogical quantification of an Acric Ferralsol from the Ponta Grossa region, state of Paraná, Brazil, was carried out using this Method with X-Ray Diffraction data to verify if this method was suitable for mineral quantification of a highly-weathered soil. The A, AB and B3 horizons were fractioned to separate the different particle sizes: clay, silt, fine sand (by Stokes Law) and coarse sand fractions (by sieving), with the procedure free of chemical treatments. X-ray Fluorescence, Inductively Coupled Plasma Atomic Emission Spectrometry, Infrared Spectroscopy and Mössbauer Spectroscopy were used in order to assist the mineral identification and quantification. The Rietveld Method enabled the quantification of the present minerals. In a general way, the quantitative mineralogical characterization by the Rietveld Method revealed that quartz, gibbsite, rutile, hematite, goethite, kaolinite and halloysite were present in the clay and silt fractions of all horizons. The silt fractions of the deeper horizons were different from the more superficial ones due to the presence of large amounts of quartz. The fine and the coarse sand fractions are constituted mainly by quartz. Therefore, a mineralogical quantification of the finer fraction (clay and silt) by the Rietveld Method was successful.

Epidemiologia da Leishmaniose Tegumentar e descrição das populações de flebotomíneos no município de Acrelândia, Acre, Brasil

São apresentadas neste artigo a distribuição da leishmaniose tegumentar (LT) e descrição das populações de flebotomíneos em Acrelândia, Acre. Os dados epidemiológicos foram obtidos a partir de fichas de notificação de casos ocorridos entre 2001 e 2004, e os dados entomológicos são provenientes de capturas com armadilhas luminosas efetuadas entre 2004 e 2005 na zona rural de Acrelândia. Ocorreram 82 novos casos de LT, com idade entre 2 e 69 anos, sendo 75,6% em homens e 83,9% na zona rural. Predominou a LT com lesões únicas (78%). A microscopia direta da lesão, intradermorreação de Montenegro e biópsia apresentaram positividade de 100%, 98% e 79,5%, respectivamente. A resposta ao tratamento farmacológico foi bem sucedida em 71,6% dos casos; a falência terapêutica foi maior em pacientes com diagnóstico exclusivamente clínico (41,2%) e nos que receberam dose diária inadequada de antimonial pentavalente (64,3%). Foram coletados 40 espécimes de flebotomíneos em propriedades rurais com casos de LT (3 gêneros, 14 espécies), sendo 3 espécies conhecidas como vetoras ou possíveis vetoras de Leishmania: Nyssomyia antunesi predominou no peridomicílio (59,1%) e em margens de matas; Nyssomyia whitmani foi freqüente no peridomicílio (15%) e a única espécie encontrada no intradomicílio, e Trichophoromyia ubiquitalis foi capturada no peridomicílio. O uso de dados epidemiológicos existentes no serviço de saúde de Acrelândia, embora com várias limitações, permitiu avaliar a eficácia do diagnóstico e o tratamento empregados no município, enquanto os dados entomológicos coletados podem orientar estudos mais amplos visando identificar os vetores e espécies circulantes na região.

Situação epidemiológica da brucelose bovina no Estado de Minas Gerais

Realizou-se um estudo para caracterizar a situação epidemiológica da brucelose bovina no Estado de Minas Gerais. O Estado foi estratificado em sete circuitos produtores. Em cada circuito foram amostradas aleatoriamente cerca de 300 propriedades e, dentro dessas, foi escolhido, de forma aleatória, um número pré-estabelecido de animais, dos quais foi obtida uma amostra de sangue. No total, foram amostrados 20.643 animais, provenientes de 2.204 propriedades. Em cada propriedade visitada aplicou-se um questionário epidemiológico para verificar o tipo de exploração e as práticas zootécnicas e sanitárias que poderiam estar associadas ao risco de infecção pela doença. O protocolo de testes utilizado foi o da triagem com o teste do antígeno acidificado tamponado e a confirmação dos positivos com o teste do 2-mercaptoetanol. O rebanho foi considerado positivo, se pelo menos um animal foi reagente às duas provas sorológicas. As prevalências de focos e de animais infectados do Estado foram de 6,0% [5,0-7,1%] e 1,1% [0,78-1,4%], respectivamente. Os resultados para os circuitos pecuários da prevalência de focos e de animais foram: circuito 1, 4,7% [2,7-7,7%] e 0,82% [0,06-1,6%]; circuito 2, 7,2% [4,6-10,6%] e 1,2% [0,53-1,8%]; circuito 3, 6,8% [4,3-10,0%] e 1,5% [0,47-2,4%]; circuito 4, 6,5% [4,1-9,8%] e 1,1% [0,39-1,7%]; circuito 5, 3,8% [2,0-6,5%] e 0,40% [0,11-0,69%]; circuito 6, 6,2% [3,8-9,6%] e 0,66% [0,29-1,0%]; circuito 7, 11,0% [7,7-15,0%] e 1,7% [0,92-2,6%], respectivamente. Os fatores de risco (odds ratio, OR) associados à condição de foco foram: compra de reprodutores (OR = 1,66 [1,13-2,44]), ocorrência de aborto nos últimos 12 meses (OR = 1,81 [1,26-2,60]) e presença de cervídeos na propriedade (OR = 1,56 [1,08-2,27]). A vacinação contra brucelose foi identificada como fator protetor (OR = 0,38 [0,19-0,79]). Concluiu-se que o programa obrigatório de vacinação de bezerras, iniciado na década de 1990, está sendo eficaz ao reduzir a prevalência em todo o Estado e em todos os sistemas de produção animal. As autoridades sanitárias devem priorizar o controle da compra de animais para reprodução, que não apresentem garantias sanitárias e incorporar essa medida às ações de educativas.

Ressignificação existencial do pretérito e longevidade humana

Existem, atualmente, mais de 300 hipóteses relativas à caracterização, função e mecanismos do envelhecimento, possivelmente devido ao aumento de idosos no mundo. Embora se avente uma função social à velhice humana, as transformações da sociedade impuseram uma cultura de descarte, incluindo pessoas como os idosos. Tal exclusão, que se associa à tristeza, depressão e morte desse grupo, é contraditória ao aumento do tempo de vida dos idosos constatado atualmente. O presente trabalho tentou determinar os aspectos ambientais envolvidos na longevidade usando uma técnica de metodologia qualitativa denominada grounded theory (ou teoria fundamentada nos dados) em dados fornecidos por ex-ferroviários longevos. Constatou-se que as representações dos ex-ferroviários confluem para a categoria central: desolação pelo aniquilamento da vida e do ambiente, no presente, devido à continuada negligência do Estado e da Sociedade na promoção e preservação das coisas boas para a vida que havia no passado. Observou-se ainda que, paralelamente à hipervalorização genérica das coisas do passado, há constatação recente de que suas existências fizeram parte da epopeia que promoveu o desenvolvimento econômico e social do interior paulista e possibilitou uma ressignificação existencial do passado, sugerindo ser um potente mecanismo de defesa que culmina em longevidade. Tal achado se insere na hipótese de que a função da longevidade seria a de preservar um contingente social com conhecimentos de um modo de vida que deu certo por ser socialmente vantajoso

Morphometric and genetic changes in a population of Apis mellifera after 34 years of Africanization

Though the replacement of European bees by Africanized honey bees in tropical America has attracted considerable attention, little is known about the temporal changes in morphological and genetic characteristics in these bee populations. We examined the changes in the morphometric and genetic profiles of an Africanized honey bee population collected near where the original African swarms escaped, after 34 years of Africanization. Workers from colonies sampled in 1968 and in 2002 were morphometrically analyzed using relative warps analysis and an Automatic Bee Identification System (ABIS). All the colonies had their mitochondrial DNA identified. The subspecies that mixed to form the Africanized honey bees were used as a comparison for the morphometric analysis. The two morphometric approaches showed great similarity of Africanized bees with the African subspecies, Apis mellifera scutellata, corroborating with other markers. We also found the population of 1968 to have the pattern of wing venation to be more similar to A. m. scutellata than the current population. The mitochondrial DNA of European origin, which was very common in the 1968 population, was not found in the current population, indicating selective pressure replacing the European with the African genome in this tropical region. Both morphometric methodologies were very effective in discriminating the A. mellifera groups; the non-linear analysis of ABIS was the most successful in identifying the bees, with more than 94% correct classifications.

The expression of genes coding for distinct types of glycine-rich proteins varies according to the biology of three metastriate ticks, Rhipicephalus (Boophilus) microplus, Rhipicephalus sanguineus and Amblyomma cajennense

Background: Ticks secrete a cement cone composed of many salivary proteins, some of which are rich in the amino acid glycine in order to attach to their hosts' skin. Glycine-rich proteins (GRPs) are a large family of heterogeneous proteins that have different functions and features; noteworthy are their adhesive and tensile characteristics. These properties may be essential for successful attachment of the metastriate ticks to the host and the prolonged feeding necessary for engorgement. In this work, we analyzed Expressed Sequence Tags (ESTs) similar to GRPs from cDNA libraries constructed from salivary glands of adult female ticks representing three hard, metastriate species in order to verify if their expression correlated with biological differences such as the numbers of hosts ticks feed on during their parasitic life cycle, whether one (monoxenous parasite) or two or more (heteroxenous parasite), and the anatomy of their mouthparts, whether short (Brevirostrata) or long (Longirostrata). These ticks were the monoxenous Brevirostrata tick, Rhipicephalus (Boophilus) microplus, a heteroxenous Brevirostrata tick, Rhipicephalus sanguineus, and a heteroxenous Longirostrata tick, Amblyomma cajennense. To further investigate this relationship, we conducted phylogenetic analyses using sequences of GRPs from these ticks as well as from other species of Brevirostrata and Longirostrata ticks. Results: cDNA libraries from salivary glands of the monoxenous tick, R. microplus, contained more contigs of glycine-rich proteins than the two representatives of heteroxenous ticks, R. sanguineus and A. cajennense (33 versus, respectively, 16 and 11). Transcripts of ESTs encoding GRPs were significantly more numerous in the salivary glands of the two Brevirostrata species when compared to the number of transcripts in the Longirostrata tick. The salivary gland libraries from Brevirostrata ticks contained numerous contigs significantly similar to silks of true spiders (17 and 8 in, respectively, R. microplus and R. sanguineus), whereas the Longirostrata tick contained only 4 contigs. The phylogenetic analyses of GRPs from various species of ticks showed that distinct clades encoding proteins with different biochemical properties are represented among species according to their biology. Conclusions: We found that different species of ticks rely on different types and amounts of GRPs in order to attach and feed on their hosts. Metastriate ticks with short mouthparts express more transcripts of GRPs than a tick with long mouthparts and the tick that feeds on a single host during its life cycle contain a greater variety of these proteins than ticks that feed on several hosts.

Evaluation technique for determining wheel performance in the grinding of aerospace materials

Nickel-based super alloys are used in a variety of applications in which high-temperature strength and resistance to creep, corrosion, and oxidation are required, such as in aircraft gas turbines, combustion chambers, and automotive engine valves. The properties that make these materials suitable for these applications also make them difficult to grind. Grinding systems for such materials are often built around vitrified cBN (cubic boron nitride) wheels to realize maximum productivity and minimum cost per part. Conditions that yield the most economical combination of stock removal rate and wheel wear are key to the successful implementation of the grinding system. Identifying the transition point for excessive wheel wear is important. The aim of this study is to compare the performance of different cBN wheels when grinding difficult-to-grind (DTG) materials by determining the 'wheel wear characteristic curve', which correlates the G-ratio to the calculated tangential force per abrasive grain. With the proposed methodology, a threshold force per grit above which the wheel wear rate increases rapidly can be quickly identified. A comparison of performance for two abrasive product formulations in the grinding of three materials is presented. The obtained results can be applied for the development of grinding applications for DTG materials.

Architecture for machining process and production monitoring based in open computer numerical control

This paper proposes an architecture for machining process and production monitoring to be applied in machine tools with open Computer numerical control (CNC). A brief description of the advantages of using open CNC for machining process and production monitoring is presented with an emphasis on the CNC architecture using a personal computer (PC)-based human-machine interface. The proposed architecture uses the CNC data and sensors to gather information about the machining process and production. It allows the development of different levels of monitoring systems with mininium investment, minimum need for sensor installation, and low intrusiveness to the process. Successful examples of the utilization of this architecture in a laboratory environment are briefly described. As a Conclusion, it is shown that a wide range of monitoring solutions can be implemented in production processes using the proposed architecture.

Analysis of the tip roundness effects on the micro- and macroindentation response of elastic-plastic materials

In this work, the effects of indenter tip roundness oil the load-depth indentation curves were analyzed using finite element modeling. The tip roundness level was Studied based on the ratio between tip radius and maximum penetration depth (R/h(max)), which varied from 0.02 to 1. The proportional Curvature constant (C), the exponent of depth during loading (alpha), the initial unloading slope (S), the correction factor (beta), the level of piling-up or sinking-in (h(c)/h(max)), and the ratio h(max)/h(f) are shown to be strongly influenced by the ratio R/h(max). The hardness (H) was found to be independent of R/h(max) in the range studied. The Oliver and Pharr method was successful in following the variation of h(c)/h(max) with the ratio R/h(max) through the variation of S with the ratio R/h(max). However, this work confirmed the differences between the hardness values calculated using the Oliver-Pharr method and those obtained directly from finite element calculations; differences which derive from the error in area calculation that Occurs when given combinations of indented material properties are present. The ratio of plastic work to total work (W(p)/W(t)) was found to be independent of the ratio R/h(max), which demonstrates that the methods for the Calculation of mechanical properties based on the *indentation energy are potentially not Susceptible to errors caused by tip roundness.

Investigation of a magnetohyperthermia system efficacy

This study reports on the successful use of magnetic albumin nanosphere (MAN) with in vivo magnetohyperthermia (MHT) in a mouse Ehrlich tumor. Maghemite nanoparticles (8.9 nm average diameter) were encapsulated within MAN (73.0 nm average diameter). Ehrlich tumor obtained after implantation of tumor cells in the subcutaneous tissue of mice was used as a model throughout this study. MHT was performed with MAN (40 mu L) containing 1.2 x 10(15) particle/mL and 40 Oe amplitude ac magnetic field oscillating at 1 MHz. Animals not treated, treated with MAN, or exposed to the ac field were used as controls. Histopathological analysis was carried out after 2, 5, or 11 days of tumor implantation. We found that the MHT most efficient condition was obtained while applying the ac field protocol twice a day during three consecutive days. Further, in this ac field-treated group no proliferation cells were detected. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3559498]