Biotechnology applied to Annona species: a review

Annonaceae is an ancient family of plants including approximately 50 genera growing worldwide in a quite restricted area with specific agroclimatic requirements. Only few species of this family has been cultivated and exploited commercially and most of them belonging to the genus Annona such as A. muricata, A. squamosa, the hybrid A. cherimola x A. squamosa and specially Annona cherimola: the cherimoya, commercially cultivated in Spain, Chile, California, Florida, México, Australia, Ecuador, Peru, Brazil, New Zealand and several countries in South and Central America. The cherimoya shows a high degree of heterozygosis, and to obtain homogeneous and productive orchards it is necessary to avoid the propagation by seeds of this species. Additionally, the traditional methods of vegetative propagation were inefficient and inadequate, due to the low morphogenetic potential of this species, and the low rooting rate. The in vitro tissue culture methods of micropropagation can be applied successfully to cherimoya and other Annona sp to overcome these problems. Most of the protocols of micropropagation and regeneration were developed using the cultivar Fino de Jete, which is the major cultivar in Spain. First it is developed the method to micropropagate the juvenile material of cherimoya (ENCINA et al., 1994), and later it was optimized a protocol to micropropagate adult cherimoya genotypes selected by outstanding agronomical traits (PADILLA and ENCINA, 2004) and further it was improved the process through micrografting (PADILLA and ENCINA, 2011).At the present time we are involved in inducing and obtaining new elite genotypes, as part of a breeding program for the cherimoya and other Annonas, using and optimizing different methodologies in vitro: a) Adventitious organogenesis and regeneration from cellular cultures (ENCINA, 2004), b) Ploidy manipulation of the cherimoya, to obtain haploid, tetraploid and triploid plants (seedless), c) Genetic transformation, for the genes introduction to control the postharvest processes and the genes introduction to provide resistance to pathogen and insects and d) Micropropagation and regeneration of other wild Annona or related Annonaceae species such as: Annona senegalensis, A. scleroderma, A. montana, A. reticulata, A. glabra, A. diversifolia and Rollinia sp.

Identification of novel HIV restriction factors

To efficiently replicate within mammalian cells, viruses have to manoeuvre through complex host mechanisms, hijacking a network of host proteins to achieve successful propagation. To prevent this invasion, cells have evolved over time to efficiently block the incursing pathogen by direct or indirect targeting. Human immunodeficiency virus (HIV) is a retrovirus of major global public health issue. In the last decade, extensive focus on innate immune proteins has been given, and particularly restriction factors, proteins inhibiting HIV replication by affecting various stages of the viral cycle. Because of the importance of developing new HIV therapies that are associated with reduced side effects and resistances, there is an urge to understand the antiviral response against HIV. Using common features of known restriction factors as a signature to identify new anti-HIV factors, candidates were identified. Particularly multiple members of the apolipoproteins L (APOL) family were found. Cotransfection experiments confirmed very potent inhibitory effects on HIV-1 expression. Further characterization of APOL6, the best candidate, was carried out. APOL6 was not able to inhibit HIV specifically but rather inhibited any gene-encoded DNA that was cotransfected and therefore APOL6 does not classify as a bona fide restriction factor. In addition, we were able to map the activity of APOL6 to the MAD domain and mainly to residue 174. We also found that other members of the family identified in the screen, APOL1 and 3, could have similar mechanism of action as APOL6. Finally, although the complete mechanism of action of APOL6 has yet to be elucidated, it might be blocked during transfections, potentially improving transfection of primary cells. -- Pour se répliquer efficacement dans les cellules de mammifères, les virus doivent manoeuvrer à travers des mécanismes cellulaires complexes et détourner un réseau de protéines de l'hôte. Pour empêcher cette invasion, les gènes de l'hôte ont évolué dans le temps pour cibler efficacement, directement ou indirectement, l'agent pathogène. Le virus de l'immunodéficience humaine (VIH) est un rétrovirus de problème majeur de santé publique mondiale, mais le faible risque de transmission du virus pourrait être expliqué par la présence d'un système antiviral de l'hôte qui, en cas d'échec, conduit à une infection productive. Durant la dernière décennie, il y a eu un intérêt spécial porté sur les protéines immunitaires innées appelé facteurs de restriction présentant des effets inhibiteurs puissants sur la réplication du VIH en affectant différentes étapes du cycle viral. En raison de l'importance de la recherche de nouvelles thérapies anti-VIH associées à des effets secondaires et des résistances réduites comparé aux traitements actuels, il existe un besoin de comprendre la réponse antivirale innée contre le VIH. Basé sur des caractéristiques communes des facteurs de restriction connus, nous avons proposé d'identifier de nouveaux facteurs anti-VIH. Nous avons trouvé une famille de protéines, les apolipoprotéines L (APOL) montrant les effets inhibiteurs très puissants contre l'expression du VIH-1 dans des expériences de co-transfection. Nous avons décidé d'approfondir le rôle de ces protéines dans l'immunité innée et de se concentrer sur le meilleur candidat APOL6. Nous avons en outre établi qu'APOL6 n'a pas d'activité anti-virale spécifique et donc pas classé comme un facteur de bonne foi de restriction. Par ailleurs, APOL6 est capable d'inhiber fortement l'expression de tout Plasmide cotransfecté. En outre, nous avons été en mesure de cartographier l'activité d'APOL6 au domaine MAD et principalement au résidu 174. Nous avons également constaté que d'autres membres de la famille identifiés dans l'étude, APOL1 et 3, pourraient avoir le même mécanisme d'action qu'APOL6. Enfin, bien que le mécanisme d'action complet d'APOL6 reste à être élucidé, il pourrait être d'une importance biotechnologique car il pourrait potentiellement faciliter la transfection de cellules primaires après l'inhibition d'APOL6.

THE LYCHEE TREE PROPAGATION BY LAYERING

The aim of the study was to assess the influence of season and different substrates on rooting of air layers of lychee (Litchi chinensisSonn.) for the production of seedlings to ensure the formation of uniform and productive orchards. Air layers were done in plants of the Bengal cultivar using leafy and healthy woody branches, with about 0.010 to 0.015 m in diameter, in which were performed complete girdling with 0.020 m wide at a distance of 0.30 to 0.40 m below the apex. Then the branches were wrapped in moistened substrate. The layering was made at six times of theyear (January, March, May, July, September and November) and two substrates were used (coconut fiber and sphagnum) in a 6 x 2 factorial design in a randomized block with ten replicates. After 90 days, layers were separated from the matrix plant and evaluated for rooting and callus formation, root number, considering only the primary roots, length, area and volume of the roots, beyond the dry weight of roots and calluses. The months of January, March, September and November showed the best results for all analyzed variables related to rooting. With respect to the substrates, the only difference was in January and March to the root number and dry weight of roots, where the sphagnum showed the best results. The month of July was more conducive to the formation of calluses. The period between September and March was more suitable to the propagation of lychee, when there were rooting percentages above 90%, in addition to the formation of large amount of roots.

Os games digitais como um recurso cognitivo para o ensino da historia da Catalunha: um estudo de caso

Os games digitais possuem um valor educativo importante e têm sido reconhecidos pelos educadores como um rico e produtivo espaço que proporciona conteúdos de aprendizagem para os estudantes, melhorando, através dele, o desenvolvimento cognitivo do aluno. Este artigo explora as oportunidades cognitivas dos games digitais como uma ferramenta de aprendizagem e mostra um estudo de caso: o jogo de Joan de Peratallada. O objetivo desse estudo é promover o diálogo e a possível colaboração entre um jogo digital cognitivo aplicado as escolas primárias de forma a colaborar com a ensino de historia de Catalunha, Espanha.

Propuesta metodológica para la valoración de la producción en empresas ganaderas. Una aplicación práctica al sector ganadero porcino

El objetivo de este trabajo es proponer cuáles son los portadores de coste de las explotaciones ganaderas porcinas intensivas y su valoración. Para ello en primer lugar hemos descrito el proceso productivo para poder determinar los portadores de coste y finalmente la valoración de los mismos así como la producción en curso. Al tratarse de seres biológicos una de las problemáticas que se plantea para la valoración es la existencia de animales fallecidos durante el proceso productivo. A partir de este aspecto proponemos un sistema de valoración de los portadores de coste. Para comprobar que este modelo es factible, desarrollamos en el último apartado una aplicación práctica a los datos de una explotación ganadera porcina. En la elaboración del producto, en cada una de sus fases de transformación, se obtendrán los portadores de coste del proceso de producción y, eslabón a eslabón, se irá completando de forma minuciosa todo el proceso de valoración.

Estudi de la producció i de la qualitat farratgera de les pastures de la finca dels Cingles de l'Avenc (Tavertet). 2011

A Catalunya, la protecció i gestió de zones d’especial interès natural ha estat majoritàriament realitzada pel conjunt de les administracions públiques. Tot i així, en els últims anys han sorgit un conjunt d’iniciatives privades que a través d’acords de custòdia han passat a tenir un paper actiu en la protecció i gestió d’algunes finques amb un alt valor natural. És el cas de la finca els Cingles de l’Avenc, on s’ha dut a terme aquest treball, en la qual es pretén desenvolupar una activitat ramadera compatible amb la conservació dels valors naturals de la finca. L’objectiu principal d’aquest treball és conèixer la producció i qualitat farratgera dels diferents tipus de pastures que hi ha a la finca, i establir la càrrega ramadera que poden admetre. Aquest estudi ha tingut una durada de 3 anys i en aquest treball es presenten els resultats del 2011 i es fa l’anàlisi dels resultats dels 3 anys (2009, 2010, i 2011). L’estudi s’ha portat a terme en els 4 tipus principals de pastures que hi ha a la finca: joncedes, pastures mesòfiles, prats de dall i pastures sembrades. S’han utilitzat 11 parcel·les permanents excloses de la pastura, establertes l’any 2009, que inclouen la diversitat de tipus i zones de pastura. S’ha realitzat un mostreig de la biomassa mensual, d’abril a novembre, que ha consistit en dallar 4 quadrats de 50 x 50 cm, i s’ha calculat la producció anual. S’ha determinat la qualitat farratgera de l’herba de 4 moments de l’any: maig, juny, juliol i octubre. Després dels tres anys d’estudi hem obtingut que les pastures sembrades i els prats de dall són els més productius (1.067 g/m2.any i 1.005 g/m2.any, respectivament). La producció de les pastures mesòfiles i de les joncedes són més baixes (554 g/m2.any i 291 g/m2.any, respectivament). La qualitat farratgera de les pastures és bona a totes les comunitats, amb valors mitjans de proteïna digerible de 6,63%, de fibra bruta de 29,13%, de lignina de 7,29% i de 0,69 (ENL/1,700) unitats farratgeres. La producció anual global obtinguda a la finca durant aquests tres anys permet suportar una càrrega ramadera admissible d’unes 208 UBG (Unitats de Bestiar Gros. 1 U.B.G equival a 1 vaca a partir de 2 anys).

L'articulation des rapports sociaux de sexe, de classe et de race dans la migration et le travail des femmes haïtiennes

Nombre de femmes paysannes haïtiennes migrent vers Port-au-Prince où elles deviennent travailleuses domestiques. Leur service domestique permet aux femmes qui les emploient de s'investir dans le travail non-domestique et de pouvoir accéder ainsi à la migration internationale. En France, ces migrantes deviennent à leur tour travailleuses domestiques, ce qui permet aux femmes françaises de s'investir dans le travail non-domestique. Ces phénomènes témoignent de l'existence d'une chaîne de travail et de migration où s'articulent les rapports sociaux de sexe, de classe, de race et les confrontations Nord/Sud, au coeur de la mondialisation néolibérale. Quelques-unes de ces femmes racontent leur histoire qui exprime à la fois la violence des rapports sociaux et leurs stratégies pour devenir sujet. Pour penser ces « Sujettes », je propose une approche qui croise la recherche féministe et la sociologie clinique sur les plans théorique, méthodologique et épistémologique. -- Many rural Haitian women migrate to Port-au-Prince and become domestic workers. Their domestic service allows other women to invest in the non-domestic work and access to international migration as well. In France, these Haitian migrants become domestic workers in turn, which allows French women to invest in the non-domestic work. These phenomena demonstrate the existence of a global work and migration chain where gender, class, race and the North/South confrontations are articulated, in the neoliberal globalization. Some of these women tell their life story which expresses both the violence of social problems and their strategies to become subject. To think these "subjects" I propose to cross feminist research and clinical sociology on the theoretical, methodological and epistemological point of view. Intersectionality among gender, race and class, North / South confrontations, productive and reproductive labour , domestic work, domestic service, care work , internal and international migration, neoliberal globalization, clinical sociology.

Task Trade and its determinants in Spain: a national and regional analysis

Globalisation and technological advances have made possible to offshore specific productive tasks (that do not require physical proximity to the actual location of the work unit) to foreign countries where these are usually performed at lower costs. We analyse the effect of task trade (i.e. task offshorability) on Spanish regional and national employment levels correlating a newly built index of task-delocalisation index to key variables such as the region’s wealth, the worker’s age and level of education, the importance of the service sector and the technological level of the economic activities undertaken in that particular geographical area. We conclude that approximately 25 per cent of Spanish occupations are potentially affected by task trade / offshoring and that this is likely to benefit Spanish economy (and the performance of specific regions, categories of workers and sectors) being Spain a potential recipient of tasks offshored from abroad. Also we obtain that Spain’s trade in tasks correlates strongly with the above variables, presenting significant regional differences.

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Operational Reliability Analysis of a Three-Tiered Thin-Client ERP-system in an International Corporate Environment

Internationalization and the following rapid growth have created the need to concentrate the IT systems of many small-to-medium-sized production companies. Enterprise Resource Planning systems are a common solution for such companies. Deployment of these ERP systems consists of many steps, one of which is the implementation of the same shared system at all international subsidiaries. This is also one of the most important steps in the internationalization strategy of the company from the IT point of view. The mechanical process of creating the required connections for the off-shore sites is the easiest and most well-documented step along the way, but the actual value of the system, once operational, is perceived in its operational reliability. The operational reliability of an ERP system is a combination of many factors. These factors vary from hardware- and connectivity-related issues to administrative tasks and communication between decentralized administrative units and sites. To accurately analyze the operational reliability of such system, one must take into consideration the full functionality of the system. This includes not only the mechanical and systematic processes but also the users and their administration. All operational reliability in an international environment relies heavily on hardware and telecommunication adequacy so it is imperative to have resources dimensioned with regard to planned usage. Still with poorly maintained communication/administration schemes no amount of bandwidth or memory will be enough to maintain a productive level of reliability. This thesis work analyzes the implementation of a shared ERP system to an international subsidiary of a Finnish production company. The system is Microsoft Dynamics Ax, currently being introduced to a Slovakian facility, a subsidiary of Peikko Finland Oy. The primary task is to create a feasible base of analysis against which the operational reliability of the system can be evaluated precisely. With a solid analysis the aim is to give recommendations on how future implementations are to be managed.

Runkoverstaan tuotannon läpimenoajan sekä valmistusystävällisyyden kehittäminen

Diplomityö tehtiin kansainväliseen maanalaisia kaivoskoneita toimittavaan yritykseen. Diplomityön tavoitteena oli kartoittaa runkojen läpimenoaikaa robottihitsauksen ja koneistuksen osalta Normet Oy:n hitsaamon tuotannossa. Diplomityön teoriaosassa on esitelty tuotantojärjestelmiä, tuotantotekniikan kehittämisen osa-alueita, valmistusystävällisyyttä, tuotannonohjausta sekä tuotannon mittareita tuottavuuden kehittämisen näkökulmasta. Diplomityön kokeellisessa osassa tehtiin nykyisten tuotantoprosessien tarkat aikaseurannat. Ensisijaisesti koneistuksen kehittämisellä tavoiteltiin asetus- ja sivuaikojen minimointia sekä tuottavampaa lastuamista. Näin ollen uusien työkalujen sekä koneistusinnovaatioiden löytäminen oli avainasemassa kehitystyössä. Robotisoinnin kehittämisessä tärkeintä on tehokkaampien hitsausprosessien hyödyntäminen, laatutekijöiden analysointi sekä robottiystävällisten konstruktioiden käyttöönotto. Case-esimerkissä näitä menetelmiä pyritään esittämään Normetin volyymituote NT100-rungossa.

Energiaa säästävä uusi viemäriveden pumppausteknologia

Pumppaaminen kuluttaa teollisuudessa huomattavan osan energiasta, joten siellä on myös merkittäviä säästömahdollisuuksia. Maailmanlaajuisesti pumppaus kuluttaa noin viidenneksen sähkömoottorien energiantarpeesta, ja tietyillä teollisuudentoimialoilla jopa yli 50%. Jätevedenpumppaus perustuu edelleenkin pääosin 50- ja 60- luvuilla kehitettyyn tekniikkaan, merkittäviä energiansäästöjä on mahdollista saavuttaa suhteellisen pienillä investoinneilla. Työn teoriaosassa käsitellään perusteet jätevedenkäsittelystä, ja viemäriputkiston rakenteesta. Pumppuja, sähkömoottoreita ja taajuusmuuttajia käsitellään laajemmin keskittyen niiden toimintaan ja toimintaa ohjaaviin teorioihin. Empiirisessä osassa tutkitaan uuden teknologian energiansäästöpotentiaalia erilaisilla mittauksilla, sekä mittausten pohjalta tehdyillä case-analyyseillä. Näitä analyysejä varten työn aikana kehiteltiin laskin, jolla voidaan arvioida energian kulutusta tunnetulle pumpulle, kun tiedetään haluttu toimintapiste. Työssä käsitelty uusi teknologia on mahdollisesti merkittävin uudistus viemäriveden pumppausteknologiaan taajuusmuuttajien käyttöönoton jälkeen. Teknologialla päästään eroon imukaivoista liki täysin, ja sitä kautta saadaan paremmin hallittua monia ongelmia kuten hajuhaittoja. Teknologian merkittävin hyöty on kuitenkin energiansäästö. Perinteisessä teknologiassa taajuusmuuttajat ovat olleet kannattavia, mikäli geodeettisen nostokorkeuden osuus on mahdollisimman pieni. Tyypillisessä uuden teknologian sovelluskohteissa geodeettinen nostokorkeus tulee yleensä olemaan pieni, joten uuden teknologian käyttöönoton kannattavuus on näissä kohteissa erityisen hyvä.

Estudi tècnic-econòmic de l'adaptació a la Llei de Benestar Animal d'una explotació porcina de la comarca d'Osona i posterior valoració de la seva implementació

Des de la publicació de la Llei de Benestar Animal RD 1135/ 2002, de 31 d’octubre que regula els tres aspectes clau de la producció porcina‐ sistemes d’estabulació i construccions permeses; formació obligatòria dels ramaders i maneig dels animals‐ totes les granges de nova construcció han estat projectades seguint els seus preceptes. Mentre que les granges existents han hagut d’adaptar‐hi les seves instal∙lacions sota amenaça de tancament si no es complien els requisits. L’objectiu d’aquest treball ha estat l’elaboració de l’estudi tècnic‐ econòmic per a l’adaptació a la Llei de Benestar Animal d’una explotació porcina de la comarca d’Osona. Després d’avaluar la situació inicial de les instal∙lacions, establir les línies de previsió de creixement i analitzar els avantatges i inconvenients de cada sistema i model, s’opta pel sistema d’alimentació electrònic model Nedap en grup dinàmic de truges sobre sòl amb jaç de palla. Una decisió no massa extesa en granges del sud d’Europa on se sol preferir l’slat de formigó i/o superfície pavimentada, però imprescindible perquè aquesta explotació pogués aconseguir una millor gestió de les dejeccions ramaderes i assegurar una millora agronòmica de les terres de conreu. El treball conclou amb el seguiment del desenvolupament de l’alternativa escollida i una valoració dels canvis derivats de l’adaptació al Benestar Animal després del primer any i mig en ús. Les millores obtingudes en termes de maneig, funcionament de la granja, salut dels animals i índex productius són remarcables. D’una banda, cal destacar el fet de tenir un nombre de coixeres molt menor respecte les granges amb superfície dura, així com la facilitat i rapidesa en els parts degut al benestar. De l’altra,la reducció del volum de purí, l’increment de la fracció sòlida i la disponibilitat de compost per al camp. Per això, no és exagerat observar el jaç amb palla com una de les solucions més adequades i equilibrades per aquesta explotació que combina boví, porcí i terra per a la producció de cultius.

Labor Market Signaling and Self-Confidence: Wage Compression and the Gender Pay Gap

I extend Spence's signaling model by assuming that some workers are overconfident-they underestimate their marginal cost of acquiring education-and some are underconfident. Firms cannot observe workers' productive abilities and beliefs but know the fractions of high-ability, overconfident, and underconfident workers. I find that biased beliefs lower the wage spread and compress the wages of unbiased workers. I show that gender differences in self-confidence can contribute to the gender pay gap. If education raises productivity, men are overconfident, and women underconfident, then women will, on average, earn less than men. Finally, I show that biased beliefs can improve welfare.