A Perturbation and Observation Routine Used To Control A Power Converter

This paper presents a programable perturbation and observation control implementation for a wind generation system and its power electronic converter. The objective of the method in this particular application is to adjust the power delivered to charge a battery to its maximum and allowable value, function of the real values of several parameters and their continuous variation, the most important the wind velocity and the turbine efficiency. Also, to improve the power throughput and to use the turbine and generator marginal zones of operation, an unusual power converter is used, allowing a wide range for the input voltage values. The implemented control is continuously measuring the actual power and looks for a new and powerful operation point. © 2014 IEEE.

Smart-HOP: a reliable handoff mechanism for mobile wireless sensor networks

Handoff processes, the events where mobile nodes select the best access point available to transfer data, have been well studied in cellular and WiFi networks. However, wireless sensor networks (WSN) pose a new set of challenges due to their simple low-power radio transceivers and constrained resources. This paper proposes smart-HOP, a handoff mechanism tailored for mobile WSN applications. This work provides two important contributions. First, it demonstrates the intrinsic relationship between handoffs and the transitional region. The evaluation shows that handoffs perform the best when operating in the transitional region, as opposed to operating in the more reliable connected region. Second, the results reveal that a proper fine tuning of the parameters, in the transitional region, can reduce handoff delays by two orders of magnitude, from seconds to tens of milliseconds.

Micro-generation Evaluation of the Zero Emissions Technologies in the Portuguese Market

Micro-generation is the small scale production of heat and/or electricity from a low carbon source and can be a powerful driver for carbon reduction, behavior change, security of supply and economic value. The energy conversion technologies can include photovoltaic panels, micro combined heat and power, micro wind, heat pumps, solar thermal systems, fuel cells and micro hydro schemes. In this paper, a small research of the availability of the conversion apparatus and the prices for the micro wind turbines and photovoltaic systems is made and a comparison between these two technologies is performed in terms of the availability of the resource and costs. An analysis of the new legal framework published in Portugal is done to realize if the incentives to individualspsila investment in sustainable and local energy production is worth for their point of view. An economic evaluation for these alternatives, accounting with the governmentpsilas incentives should lead, in most cases, into attractive return rates for the investment. Apart from the attractiveness of the investment there are though other aspects that should be taken into account and those are the benefits that these choices have to us all. The idea is that micro-generation will not only make a significant direct contribution to carbon reduction targets, it will also trigger a multiplier effect in behavior change by engaging hearts and minds, and providing more efficient use of energy by householders. The diversified profile of power generation by micro-generators, both in terms of location and timing, should reduce the impact of intermittency or plant failures with significant gains for security of supply.

Notas sobre depósitos de Taveiro estratigrafia, paleontologia, idade, paleoecologia

This paper reports some research work that has been done to support Geological Survey's field work for the 1:50.000 Carta Geológica de Portugal, (sheets 19-C Figueira da Foz and 19-D Coimbra-Lousã). Its main purpose was to establish the age of some continental formations. At Cerâmica do Mondego, Ld.ª near Taveiro, two series were observed. The lower one is mainly pelitic, montmorillonite being predominant. It also includes some sandy beds and channel deposits with high energy sediments (conglomerate with limestone pebbles). The upper series lies unconformably upon the former, and there is a neat discontinuity surface between the two. It mainly consists of sands, kaolinite being the most abundant of the clay minerals. This seems to indicate an intensive weathering, an acid, well drained environment and transportation by quite high energy running waters. No fossils were recorded. Preliminary paleontological results are presented, along with some data concerning other localities (Aveiro, etc.). Fossils found in the lower series are: gastropoda (Bulimus gaudryi, TV. 15 bed), several vertebrates (TV. 18), fishes (TV. 19?) and plants (TV. 19-TV. 24). Vertebrata belong to the same fauna as that from Vizo, Aveiro, etc. The presence of mammals is most important as only a single tooth was previously Know in Europe (Southern France) in Late Cretaceous formations. Elsewhere there are some mammalian remains in Peru besides the rich assemblages found in the USA and Mongolia. Plants are representative of the «Debeya flora» well known at several localities in Beira Litoral province, in «Buçaco sandstones», and in Lisbon's «Basaltic Complex». The most important stratigraphical conclusion is that the lower series is Upper Campanian and/or Maastrichtian in age, and not Tertiary as sometimes it has been considered. As at Aveiro, «Bebeya flora» occurs in-beds somewhat higher than those with the Aveiro-Vizo-Taveiro vertebrate fauna. Correlation with other «Debeya flora» localities are now more clear. Data concerning Taveiro lower series, in the whole, point out to a rather warm (and moist?) environment in an occasionally (seasonally?) flooded region.

Notas sobre depósitos de Taveiro estratigrafia, paleontologia, idade, paleoecologia

This paper reports some research work that has been done to support Geological Survey's field work for the 1:50.000 Carta Geológica de Portugal, (sheets 19-C Figueira da Foz and 19-D Coimbra-Lousã). Its main purpose was to establish the age of some continental formations. At Cerâmica do Mondego, Lda. near Taveiro, two series were observed. The lower one is mainly pelitic, montmorillonite being predominant. It also includes some sandy beds and channel deposits with high energy sediments (conglomerate with limestone pebbles). The upper series lies unconformably upon the former, and there is a neat discontinuity surface between the two. It mainly consists of sands, kaolinite being the most abundant of the clay minerals. This seems to indicate an intensive weathering, an acid, well drained environment and transportation by quite high energy running waters. No fossils were recorded. Preliminary paleontological results are presented, along with some data concerning other localities (Aveiro, etc). Fossils found in the lower series are: gastropoda (Bulimus gaudryi, TV. 15 bed), several vertebrates (TV. 18), fishes (TV. 19?) and plants (TV. 19-TV. 24). Vertebrata belong to the same fauna as that from Vizo, Aveiro, etc. The presence of mammals is most important as only a single tooth was previously know in Europe (Southern France) in Late Cretaceous formations. Elsewhere there are some mammalian remains in Peru besides the rich assemblages found in the USA and Mongolia. Plants are representative of the «Debeya flora» well known at several localities in Beira Litoral province, in «Buçaco sandstones», and in Lisbon's «Basaltic Complex». The most important stratigraphical conclusion is that the lower series is Upper Campanian and/or Maastrichtian in age, and not Tertiary as sometimes it has been considered. As at Aveiro, «Bebeya flora» occurs in-beds somewhat higher than those with the Aveiro-Vizo-Taveiro vertebrate fauna. Correlation with other «Debeya flora» localities are now more clear. Data concerning Taveiro lower series, in the whole, point out to a rather warm (and moist?) environment in an occasionally (seasonally?) flooded region.

An approach for reliability-based robust design optimisation of angle-ply composites

Variations of manufacturing process parameters and environmental aspects may affect the quality and performance of composite materials, which consequently affects their structural behaviour. Reliability-based design optimisation (RBDO) and robust design optimisation (RDO) searches for safe structural systems with minimal variability of response when subjected to uncertainties in material design parameters. An approach that simultaneously considers reliability and robustness is proposed in this paper. Depending on a given reliability index imposed on composite structures, a trade-off is established between the performance targets and robustness. Robustness is expressed in terms of the coefficient of variation of the constrained structural response weighted by its nominal value. The Pareto normed front is built and the nearest point to the origin is estimated as the best solution of the bi-objective optimisation problem.

Relatório de estágio em Educação Pré-Escolar

Mestrado em Educação Pré-Escolar

Evaluating Android OS for embedded real-time systems

Since its official public release, Android has captured the interest from companies, developers and the general audience. From that time up to now, this software platform has been constantly improved either in terms of features or supported hardware and, at the same time, extended to new types of devices different from the originally intended mobile ones. However, there is a feature that has not been explored yet - its real-time capabilities. This paper intends to explore this gap and provide a basis for discussion on the suitability of Android in order to be used in Open Real-Time environments. By analysing the software platform, with the main focus on the virtual machine and its underlying operating system environments, we are able to point out its current limitations and, therefore, provide a hint on different perspectives of directions in order to make Android suitable for these environments. It is our position that Android may provide a suitable architecture for real-time embedded systems, but the real-time community should address its limitations in a joint effort at all of the platform layers.

Mid-point for open-ended income category and the effect of equivalence scales on the income-health relationship

To estimate the mid-point of an open-ended income category and to assess the impact of two equivalence scales on income-health associations. Data were obtained from the 2010 Brazilian Oral Health Survey ( Pesquisa Nacional de Saúde Bucal – SBBrasil 2010). Income was converted from categorical to two continuous variables ( per capita and equivalized) for each mid-point. The median mid-point was R$ 14,523.50 and the mean, R$ 24,507.10. When per capita income was applied, 53% of the population were below the poverty line, compared with 15% with equivalized income. The magnitude of income-health associations was similar for continuous income, but categorized equivalized income tended to decrease the strength of association.

Inconstância, ausência e paradoxo na política para o livro no Estado Novo português

Neste artigo procura-se entender a dúplice forma como o Estado Novo em Portugal lidou com o livro como objecto de acção política. As tentativas de enquadrar o livro como alvo de promoção no sentido de um apoio efectivo e da adopção de medidas correctivas das disfunções do mercado, próprias de uma matriz contemporânea e aberta de sistemas políticos e sociais desenvolvidos, nunca terão verdadeiramente existido durante o período autocrático. Com efeito, desde o seu começo até meados da década de 1950 o regime hesitou entre fórmulas – isoladas – de suporte à edição e à leitura, que não pôde ou não quis consolidar, e opções tendentes a conseguir arregimentar agentes do livro (sobretudo editores e autores) à nunca concretizada literatura oficial do Estado Novo, e que obedecesse aos seus pressupostos. O caminho trilhado parece ter sido, a partir de dado momento, essencialmente o da repressão ao livro, pautando o poder a sua actuação pela ausência de propostas de fomento do mercado editorial e livreiro como as que se verificaram noutros contextos nacionais, inclusive ditatoriais.

Cut-off point for WHOQOL-bref as a measure of quality of life of older adults

OBJECTIVE To propose a cut-off for the World Health Organization Quality of Life-Bref (WHOQOL-bref) as a predictor of quality of life in older adults. METHODS Cross-sectional study with 391 older adults registered in the Northwest Health District in Belo Horizonte, MG, Southeastern Brazil, between October 8, 2010 and May 23, 2011. The older adults’ quality of life was measured using the WHOQOL-bref. The analysis was rationalized by outlining two extreme and simultaneous groups according to perceived quality of life and satisfaction with health (quality of life good/satisfactory – good or very good self-reported quality of life and being satisfied or very satisfied with health – G5; and poor/very poor quality of life – poor or very poor self-reported quality of life and feeling dissatisfied or very dissatisfied with health – G6). A Receiver-Operating Characteristic curve (ROC) was created to assess the diagnostic ability of different cut-off points of the WHOQOL-bref. RESULTS ROC curve analysis indicated a critical value 60 as the optimal cut-off point for assessing perceived quality of life and satisfaction with health. The area under the curve was 0.758, with a sensitivity of 76.8% and specificity of 63.8% for a cut-off of ≥ 60 for overall quality of life (G5) and sensitivity 95.0% and specificity of 54.4% for a cut-off of < 60 for overall quality of life (G6). CONCLUSIONS Diagnostic interpretation of the ROC curve revealed that cut-off < 60 for overall quality of life obtained excellent sensitivity and negative predictive value for tracking older adults with probable worse quality of life and dissatisfied with health.

A CMOS micro power switched-capacitor DC-DC step-up converter for indoor light energy harvesting applications

This paper presents a micro power light energy harvesting system for indoor environments. Light energy is collected by amorphous silicon photovoltaic (a-Si:H PV) cells, processed by a switched capacitor (SC) voltage doubler circuit with maximum power point tracking (MPPT), and finally stored in a large capacitor. The MPPT fractional open circuit voltage (V-OC) technique is implemented by an asynchronous state machine (ASM) that creates and dynamically adjusts the clock frequency of the step-up SC circuit, matching the input impedance of the SC circuit to the maximum power point condition of the PV cells. The ASM has a separate local power supply to make it robust against load variations. In order to reduce the area occupied by the SC circuit, while maintaining an acceptable efficiency value, the SC circuit uses MOSFET capacitors with a charge sharing scheme for the bottom plate parasitic capacitors. The circuit occupies an area of 0.31 mm(2) in a 130 nm CMOS technology. The system was designed in order to work under realistic indoor light intensities. Experimental results show that the proposed system, using PV cells with an area of 14 cm(2), is capable of starting-up from a 0 V condition, with an irradiance of only 0.32 W/m(2). After starting-up, the system requires an irradiance of only 0.18 W/m(2) (18 mu W/cm(2)) to remain operating. The ASM circuit can operate correctly using a local power supply voltage of 453 mV, dissipating only 0.085 mu W. These values are, to the best of the authors' knowledge, the lowest reported in the literature. The maximum efficiency of the SC converter is 70.3 % for an input power of 48 mu W, which is comparable with reported values from circuits operating at similar power levels.

A web-based tool to evaluate the iterative processes of direct search methods

Constrained and unconstrained Nonlinear Optimization Problems often appear in many engineering areas. In some of these cases it is not possible to use derivative based optimization methods because the objective function is not known or it is too complex or the objective function is non-smooth. In these cases derivative based methods cannot be used and Direct Search Methods might be the most suitable optimization methods. An Application Programming Interface (API) including some of these methods was implemented using Java Technology. This API can be accessed either by applications running in the same computer where it is installed or, it can be remotely accessed through a LAN or the Internet, using webservices. From the engineering point of view, the information needed from the API is the solution for the provided problem. On the other hand, from the optimization methods researchers’ point of view, not only the solution for the problem is needed. Also additional information about the iterative process is useful, such as: the number of iterations; the value of the solution at each iteration; the stopping criteria, etc. In this paper are presented the features added to the API to allow users to access to the iterative process data.

Experimental Study And Evaluation Of Paper-Based Inkjet Electrodes For ECG Signal Acquisition

Applications involving biosignals, such as Electrocardiography (ECG), are becoming more pervasive with the extension towards non-intrusive scenarios helping targeting ambulatory healthcare monitoring, emotion assessment, among many others. In this study we introduce a new type of silver/silver chloride (Ag/AgCl) electrodes based on a paper substrate and produced using an inkjet printing technique. This type of electrodes can increase the potential applications of biosignal acquisition technologies for everyday life use, given that there are several advantages, such as cost reduction and easier recycling, resultant from the approach explored in our work. We performed a comparison study to assess the quality of this new electrode type, in which ECG data was collected with three types of Ag/AgCl electrodes: i) gelled; ii) dry iii) paper-based inkjet printed. We also compared the performance of each electrode when acquired using a professional-grade gold standard device, and a low cost platform. Experimental results showed that data acquired using our proposed inkjet printed electrode is highly correlated with data obtained through conventional electrodes. Moreover, the electrodes are robust to high-end and low-end data acquisition devices. Copyright © 2014 SCITEPRESS - Science and Technology Publications. All rights reserved.

The evolution of user mobility on the Eduroam network

The emergence of smartphones with Wireless LAN (WiFi) network interfaces brought new challenges to application developers. The expected increase of users connectivity will impact their expectations for example on the performance of background applications. Unfortunately, the number and breadth of the studies on the new patterns of user mobility and connectivity that result from the emergence of smartphones is still insufficient to support this claim. This paper contributes with preliminary results on a large scale study of the usage pattern of about 49000 devices and 31000 users who accessed at least one access point of the eduroam WiFi network on the campuses of the Lisbon Polytechnic Institute. Results confirm that the increasing number of smartphones resulted in significant changes to the pattern of use, with impact on the amount of traffic and users connection time.