Otimização do tracionamento de canino impactado pela técnica do arco segmentado: relato de caso clinico

Upper canines impaction are considered the second most frequent and are associated to important esthetics and functional limitations. Among the treatment strategies described in the literature the most commonly used are the extraction of the primary canines and the surgical exposure followed by orthodontic traction, that requires an adequate interdisciplinary approach. The aim of this case report is to draw the attention of the clinician to the possibility of adapting the segmented arch technique to manage a canine impaction clinical case.

Tratamento da má oclusão de classe II com aparelho Jasper Jumper

The Jasper Jumper appliance was developed as a fixed orthopedic device that is connected to the upper and lower leveling arches to promote the Class II correction by restricting the maxillary growth (headgear effect), mandibular growth inducement (activator effect) and dentoalveolar changes.

Tratamento ortodôntico da agenesia de incisivo lateral superior com envolvimento de fratura radicular de incisivo central superior

Patients with agenesis of maxillary lateral incisor must have in your planning functional and aesthetic considerations, important to the success of the treatment, regardless of whether the choice of treatment is closing or opening and maintenance of space for rehabilitation with prosthesis. This choice will depend on factors such as skeletal and tooth structure and profile. Children and adolescents are the group of individuals most exposed to trauma and fracture of the maxillary lateral incisor due to the activities they perform. Proper diagnosis and good treatment are essential to the success of the treatment. This article aims to report a case of agenesis of the maxillary lateral incisor along with the involvement of a root fracture of the maxillary central incisor. The orthodontic treatment was successfully finished with a favorable prognosis for the fractured incisor to stay in a esthetic and functional position.

Tratamento ortodôntico lingual individualizado com o sistema Incognito

Introduction: The orthodontic treatment using lingual brackets has been desired by adult patients for esthetic factors. In this paper it is described the clinical steps of an orthodontic treatment using Incognito™ system, individualized lingual brackets and archwires designed by CAD/CAM technology. Methods: The presented case describes the treatment of a patient with mesofacial growth pattern,Class I malocclusion, with mandibular crowding and diastema between the upper central incisors, treated using 100% individualized lingual brackets. Results: After treatment, the molar relation of Class I was kept, the spaces between upper central incisors were closed and mandibular crowding corrected. Conclusion: This case report demonstrated the efficiency of the new method for lingual orthodontic treatment.

Controlling mechanical undesirable side effects with a tooth indicated for extraction: free anchorage

This manuscript describes the use of a tooth indicated for extraction due
to orthodontic reasons as an anchorage aid to receive undesirable side effects caused by orthodontic uprighting of a contralateral molar tooth. The mandibular right second molar was mesially tipped as a result of loss of the adjacent first molar. Since the treatment plan involved extraction of the mandibular left first premolar, undesirable side effects associated with the molar uprighting movement were transferred to this tooth. Once the second molar was vertical, the premolar was extracted and the treatment continued. The results suggest that treatment time can be reduced if undesirable orthodontic mechanical side effects can be directed to a tooth whose extraction is indicated.

Resistência ao cisalhamento de bráquetes fotopolimerizados com arco de plasma, LED e luz halógena utilizando diferentes tempos

This study evaluated in vitro the shear bond strength of brackets bonded with xenon plasma arc light, light-emitting diode (LED) and conventional halogen light using different curing times. Brackets were bonded to the buccal surface of 60 human maxillary premolars allocated to five groups. In groups 1 and 2, the resin was cured with the plasma arc for three and six seconds (s), respectively; in groups 3 and 4, the LED was used for five and ten s, respectively; and in group 5, the halogen light was used for 40 s. The specimens were stored in water for 24 hours and subjected to a shear force until bracket failure. The debonding pattern was classified according to the adhesive remnant index (ARI). The results were assessed by Anova and the SNK post-hoc test. No differences were detected among groups 2, 4 and 5, which showed higher averages than groups 1 and 3, which were not different between themselves. The ARI scores showed no differences among the three types of light sources in all times tested. Plasma arc and LED lights can be used with shorter curing times, within certain limits, than conventional halogen light for bonding orthodontic brackets, without decreasing bond strength.

Reparo periapical de dentes tratados endodonticamente submetidos a movimentação ortodôntica

The relationship of Orthodontics and Endodontics is being clarified with the development of evidence-based dentistry. However, few studies have reported the repair of periapical lesions with orthodontic treatment. Therefore, the aim of this study was to evaluate the available evidence on periapical repair of endodontically treated teeth during orthodontic movement. The strategy used was the electronic search with keywords and criteria including studies published up to July 2011. It was also carried out qualitative assessment of the articles methodology. Although a significant number of studies have reported this topic, only two filled the criteria for inclusion in this systematic review. The results obtained in the literature suggest that orthodontic treatment should be interrupted to perform endodontic treatment. During this therapy, the use of root canal dressing based on calcium hydroxide for at least 14 days, and sealer with adequate biological property are indicated. After this phase, orthodontic movement of the endodontically treated teeth can be resumed without waiting period.

Tratamiento de la deformidad facial causada por la hiperplasia condilar: relato de caso

The condylar hyperplasia is an acquired development anomaly, rare, characterized by an excessive and progressive growing, affecting neck, condilar head, body and the mandible bough, provoking an important facial asymmetry. In the article we present a case of male patient, 22-years-old, reclaiming of painful sintomatology in the region of temporomandibular joint and severe facial asymmetry. It was instituted an orthodontic-surgical treatment by means of orthognathic combined surgery and high condilectomy. After six years of post-surgical controlling, the patient is now in a good shape, without recurrence of facial asymmetry and condylar hyperplasia.

Uso de um distrator ósseo dentoimplantossuportado, feito a partir de tornos expansores convencionais, na reabilitação oral

Osteodistraction is a clinical reality, available in the last decades for the resolution of large bone deficiencies, in cases that there are pre-existing, but misplaced implants and teeth. The aims of thearticle is to present a case report in which a new possibility for bone distraction, based on tooth-implant bone distractors, made from standard orthodontic expansion-screws, was used in an area where there was an extensive need of alveolar bone and aesthetical recovery, allied to teeth and dental implant misplacement. This technique presented good clinical results, associated to effective simplicity and low cost, becoming viable clinical solution for bone tissue augmentation and aesthetical optimization. In resume, it is possible to say that the suggested technique achieved its objectives, improving the hard and soft tissue profile, whilst allowing completion of oral rehabilitation.

Lack of bone healing: an unusual complication following surgically assisted rapid palatal expansion

Bone defects at interdental osteotomy sites are as a complication of surgi-cally assisted rapid palatal expansion (SARPE). The replacement of osseoustissue by fibrous connective tissue impairs the spontaneous closure of adiastema between central incisors, and orthodontic tooth movementthrough the defect area may lead to root resorption. Treatment of such asituation requires an orthodontic-surgical approach. In this report, wedescribe the lack of bone healing at the midline osteotomy site after SARPE,which was treated by autogenous bone grafting as assessed by cone beamcomputed tomography. In addition, we discuss factors related to the aetiol-ogy and treatment of a bone defect after SARPE.

Considerações acerca do preparo ortodôntico direcionado à cirurgia ortognática

This work aims at contributing to increase and improve the communication between orthodontists and maxillofacial surgeons, reviewing and discussing the principles of diagnosis and orthodontic movement specific to patients with surgical indication. It describes the elective points in the conduct of the orthodontist so that their decisions could lead to an individualized and appropriate planning, striving for excellence in terms of outcomes for the surgical-orthodontic treatment of dentofacial discrepancies.

Tratamento multidisciplinar: relato de casos clínicos

Introduction: Adult patients are more prone to periodontal disease mainly caused by poor plaque control. In these patients, orthodontic movement is not contraindicated, but it is necessary to evaluate their periodontal status so that we can establish the appropriate treatment plan. Objective: The objective of this article is to describe and discuss the clinical cases of severely periodontally compromised individuals in need of oral rehabilitation. Methods: The study consisted of orthodontic treatment of two cases with periodontal involvement. After clinical and radiographic examinations, the cases were analyzed by a multidisciplinary team of Orthodontics, Periodontics and Prosthodontics, in order to provide the patient with the best possible esthetic, functional and stability outcomes. Periodontal treatment consisted of supra and subgingival scaling prior to orthodontic treatment, and regular maintenance performed on a quarterly basis throughout orthodontic movement. Activation was carried out every 45 to 50 days, with light forces. Retention remains to the present day, even after completion of the rehabilitation. Conclusion: Multidisciplinary oral rehabilitation treatment yields satisfactory results. The interaction between Orthodontics and Periodontics reveals that patients with reduced, but healthy periodontium, can receive orthodontic treatment as long as the forces applied do not exceed patient's biological limits.

Photoelasticity in Dentistry: a literature review

Introduction and Objective: Photoelasticity consists of an experimental technique of stress analysis. This technique is very used in most different areas including Dentistry. This literature review presents the several applications of photoelastic technique in Dentistry the several applications of photoelastic technique in Dentistry as well as its advantages and disadvantages. Literature review: Based on this method of analysis, it is possible the verification of the stress distribution and deformation in structures with complex geometry as maxilla and mandible. It can be used to evaluate the distribution of stress on several types of prosthesis as removable partial denture systems with different retention systems, conventional implant prosthesis, overdentures and Brånemark protocols. Moreover, photoelasticity can be used to assess the stress generated by various by various orthodontic movements, different orthodontic systems and different materials (orthodontic wires). In addition, it is used to analyze different defects of maxillectomy, splint types on traumatized tooth and post-core restoration methods. This technique can also be used to assess dental instruments such as evaluation of different designs of periodontal probe. Conclusion: The photoelastic analysis has been a technique of great importance in health area studies, more specifically in Dentistry. Based on this method of analysis, it is possible to measure the stress distribution and deformation in structures with complex geometry as maxilla and mandible.

Diretrizes para o tratamento e acompanhamento periodontal durante o tratamento ortodôntico

The aim of this paper was to search though a revision of the literature the cares before, during and after the orthodontic treatment in patients with a periodontal disease. The literature shows that the orthodontical treatment in healthy patients brings no risk to the periodontium, although the presence of an active periodontal disease counter indicates the dental movement. Thus, it is extremely important to execute a correct diagnosis of any periodontal alteration and treat them before the beginning of the orthodontical treatment. Besides, during the whole orthodontical treatment is also important to have a periodontal control with periodic reevaluations and at the end of the orthodontical treatment, a new oral hygiene orientation may be needed to finally establish the follow-up of the patient according to the risk of periodontal disease.

Influência do ciclo de sinterização da porcelana na adaptação marginal de infraestruturas de NiCrTi em função da biomecânica do preparo

A metal coping may undergo changes during porcelain firing, which compromises its marginal adaptation. The use of NiCrTi alloy proposes to minimize this effect through the high melting point of titanium present in its composition. This study evaluated the influence of porcelain firing cycle on the marginal adaptation of NiCrTi copings in different preparation designs. Forty standardized metal dies were fabricated with the following combinations finish line/convergence of the axial walls: 1) shoulder/6°; 2) shoulder/20°; 3) sloping shoulder/6°; 4) sloping shoulder/20°. On each die a metal ceramic restoration coping was made. The die/coping set was stabilized with orthodontic elastics, divided into four equidistant areas with three measurement points each and a cementation pressure was simulated. The measurements were taken under a stereomicroscope (32×). After the first measurement, the copings were submitted to sintering cycles simulating porcelain application. For repeated measurements, the same procedures described above were performed. Data were submitted to Student’s-t test, 1-way ANOVA and Tukey´s test (α = 0.05). Adaptation means (µm) before and after porcelain firing in different preparations were: 1) 111.92 and 127.31; 2) 124.15 and 135.48; 3) 122.19 and 138.77; 4) 166.09 and 186.72; respectively. The porcelain firing impaired adaptation, regardless of the preparation design. The preparation in a 20° sloping shoulder provided a worse adaptation when compared with preparations that had 6° and 20° shoulder, which were statistically equal. The 6° sloping shoulder was statistically equal to the other three preparation designs.