Design, Fabrication, and Characterization of Carbon Nanotube Field Emission Devices for Advanced Applications

Carbon nanotubes (CNTs) have recently emerged as promising candidates for electron field emission (FE) cathodes in integrated FE devices. These nanostructured carbon materials possess exceptional properties and their synthesis can be thoroughly controlled. Their integration into advanced electronic devices, including not only FE cathodes, but sensors, energy storage devices, and circuit components, has seen rapid growth in recent years. The results of the studies presented here demonstrate that the CNT field emitter is an excellent candidate for next generation vacuum microelectronics and related electron emission devices in several advanced applications.

The work presented in this study addresses determining factors that currently confine the performance and application of CNT-FE devices. Characterization studies and improvements to the FE properties of CNTs, along with Micro-Electro-Mechanical Systems (MEMS) design and fabrication, were utilized in achieving these goals. Important performance limiting parameters, including emitter lifetime and failure from poor substrate adhesion, are examined. The compatibility and integration of CNT emitters with the governing MEMS substrate (i.e., polycrystalline silicon), and its impact on these performance limiting parameters, are reported. CNT growth mechanisms and kinetics were investigated and compared to silicon (100) to improve the design of CNT emitter integrated MEMS based electronic devices, specifically in vacuum microelectronic device (VMD) applications.

Improved growth allowed for design and development of novel cold-cathode FE devices utilizing CNT field emitters. A chemical ionization (CI) source based on a CNT-FE electron source was developed and evaluated in a commercial desktop mass spectrometer for explosives trace detection. This work demonstrated the first reported use of a CNT-based ion source capable of collecting CI mass spectra. The CNT-FE source demonstrated low power requirements, pulsing capabilities, and average lifetimes of over 320 hours when operated in constant emission mode under elevated pressures, without sacrificing performance. Additionally, a novel packaged ion source for miniature mass spectrometer applications using CNT emitters, a MEMS based Nier-type geometry, and a Low Temperature Cofired Ceramic (LTCC) 3D scaffold with integrated ion optics were developed and characterized. While previous research has shown other devices capable of collecting ion currents on chip, this LTCC packaged MEMS micro-ion source demonstrated improvements in energy and angular dispersion as well as the ability to direct the ions out of the packaged source and towards a mass analyzer. Simulations and experimental design, fabrication, and characterization were used to make these improvements.

Finally, novel CNT-FE devices were developed to investigate their potential to perform as active circuit elements in VMD circuits. Difficulty integrating devices at micron-scales has hindered the use of vacuum electronic devices in integrated circuits, despite the unique advantages they offer in select applications. Using a combination of particle trajectory simulation and experimental characterization, device performance in an integrated platform was investigated. Solutions to the difficulties in operating multiple devices in close proximity and enhancing electron transmission (i.e., reducing grid loss) are explored in detail. A systematic and iterative process was used to develop isolation structures that reduced crosstalk between neighboring devices from 15% on average, to nearly zero. Innovative geometries and a new operational mode reduced grid loss by nearly threefold, thereby improving transmission of the emitted cathode current to the anode from 25% in initial designs to 70% on average. These performance enhancements are important enablers for larger scale integration and for the realization of complex vacuum microelectronic circuits.

Surgical Procedure Characteristics and Risk of Sharps-Related Blood and Body Fluid Exposure.

OBJECTIVE To use a unique multicomponent administrative data set assembled at a large academic teaching hospital to examine the risk of percutaneous blood and body fluid (BBF) exposures occurring in operating rooms. DESIGN A 10-year retrospective cohort design. SETTING A single large academic teaching hospital. PARTICIPANTS All surgical procedures (n=333,073) performed in 2001-2010 as well as 2,113 reported BBF exposures were analyzed. METHODS Crude exposure rates were calculated; Poisson regression was used to analyze risk factors and account for procedure duration. BBF exposures involving suture needles were examined separately from those involving other device types to examine possible differences in risk factors. RESULTS The overall rate of reported BBF exposures was 6.3 per 1,000 surgical procedures (2.9 per 1,000 surgical hours). BBF exposure rates increased with estimated patient blood loss (17.7 exposures per 1,000 procedures with 501-1,000 cc blood loss and 26.4 exposures per 1,000 procedures with >1,000 cc blood loss), number of personnel working in the surgical field during the procedure (34.4 exposures per 1,000 procedures having ≥15 personnel ever in the field), and procedure duration (14.3 exposures per 1,000 procedures lasting 4 to <6 hours, 27.1 exposures per 1,000 procedures lasting ≥6 hours). Regression results showed associations were generally stronger for suture needle-related exposures. CONCLUSIONS Results largely support other studies found in the literature. However, additional research should investigate differences in risk factors for BBF exposures associated with suture needles and those associated with all other device types. Infect. Control Hosp. Epidemiol. 2015;37(1):80-87.

La croyance au Père Noël a une date de péremption

La plupart des enfants en Occident sont en contact avec le Père Noël au cours de leur enfance. Pour la plupart des parents, il s’agit d’une croyance anodine destinée à conférer à la fête de Noël un certain mystère. Certains parents considèrent toutefois que promouvoir la croyance au Père Noël, c’est valoriser le mensonge. L’objectif de ce texte est de passer en revue les arguments des uns et des autres. Nous mettons d’abord en évidence quelques variables susceptibles de favoriser ou non cette croyance. Par la suite, nous présentons les travaux qui se sont intéressés à l’impact de la croyance au Père Noël et de la découverte de la vérité. Nous considérerons alors le point de vue des enfants et celui des parents. Nous évoquons enfin le caractère adaptatif du mensonge dans une perspective évolutionniste.

Responsiveness and clinical utility of the geriatric self-efficacy index for urinary incontinence

OBJECTIVES: To report on the responsiveness testing and clinical utility of the 12-item Geriatric Self-Efficacy Index for Urinary Incontinence (GSE-UI). DESIGN: Prospective cohort study. SETTING: Six urinary incontinence (UI) outpatient clinics in Quebec, Canada. PARTICIPANTS: Community-dwelling incontinent adults aged 65 and older. MEASUREMENTS: The abridged 12-item GSE-UI, measuring older adults' level of confidence for preventing urine loss, was administered to all new consecutive incontinent patients 1 week before their initial clinic visit, at baseline, and 3 months posttreatment. At follow-up, a positive rating of improvement in UI was ascertained from patients and their physicians using the Patient's and Clinician's Global Impression of Improvement scales, respectively. Responsiveness of the GSE-UI was calculated using Guyatt's change index. Its clinical utility was determined using receiver operating curves. RESULTS: Eighty-nine of 228 eligible patients (39.0%) participated (mean age 72.6+5.8, range 65–90). At 3-month follow-up, 22.5% of patients were very much better, and 41.6% were a little or much better. Guyatt's change index was 2.6 for patients who changed by a clinically meaningful amount and 1.5 for patients having experienced any level of improvement. An improvement of 14 points on the 12-item GSE-UI had a sensitivity of 75.1% and a specificity of 78.2% for detecting clinically meaningful changes in UI status. Mean GSE-UI scores varied according to improvement status (P<.001) and correlated with changes in quality-of-life scores (r=0.7, P<.001) and reductions in UI episodes (r=0.4, P=.004). CONCLUSION: The GSE-UI is responsive and clinically useful.

Processus d'action organisée d'un groupe de paysans de Fonds-Jean-Noël, Jacmel, Haïti

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Seawater carbonate chemistry and net calcification during experiments with coral communities, 2009

Acidification of seawater owing to oceanic uptake of atmospheric CO2 originating from human activities such as burning of fossil fuels and land-use changes has raised serious concerns regarding its adverse effects on corals and calcifying communities. Here we demonstrate a net loss of calcium carbonate (CaCO3) material as a result of decreased calcification and increased carbonate dissolution from replicated subtropical coral reef communities (n=3) incubated in continuous-flow mesocosms subject to future seawater conditions. The calcifying community was dominated by the coral Montipora capitata. Daily average community calcification or Net Ecosystem Calcification (NEC=CaCO3 production - dissolution) was positive at 3.3 mmol CaCO3 m-2 h-1 under ambient seawater pCO2 conditions as opposed to negative at -0.04 mmol CaCO3 m-2 h-1 under seawater conditions of double the ambient pCO2. These experimental results provide support for the conclusion that some net calcifying communities could become subject to net dissolution in response to anthropogenic ocean acidification within this century. Nevertheless, individual corals remained healthy, actively calcified (albeit slower than at present rates), and deposited significant amounts of CaCO3 under the prevailing experimental seawater conditions of elevated pCO2.

Experimental and RANS-CFD Study of Nacelle Drag

The drag on a nacelle model was investigated experimentally and computationally to provide guidance and insight into the capabilities of RANS-based CFD. The research goal was to determine whether industry constrained CFD could participate in the aerodynamic design of nacelle bodies. Grid refinement level, turbulence model and near wall treatment settings, to predict drag to the highest accuracy, were key deliverables. Cold flow low-speed wind tunnel experiments were conducted at a Reynolds number of 6∙〖10〗^5, 293 K and a Mach number of 0.1. Total drag force was measured by a six-component force balance. Detailed wake analysis, using a seven-hole pressure probe traverse, allowed for drag decomposition via the far-field method. Drag decomposition was performed through a range of angles of attack between 0o and 45o. Both methods agreed on total drag within their respective uncertainties. Reversed flow at the measurement plane and saturation of the load cell caused discrepancies at high angles of attack. A parallel CFD study was conducted using commercial software, ICEM 15.0 and FLUENT 15.0. Simulating a similar nacelle geometry operating under inlet boundary conditions obtained through wind tunnel characterization allowed for direct comparisons with experiment. It was determined that the Realizable k-ϵ was best suited for drag prediction of this geometry. This model predicted the axial momentum loss and secondary flow in the wake, as well as the integrated surface forces, within experimental error up to 20o angle of attack. SST k-ω required additional surface grid resolution on the nacelle suction side, resulting in 15% more elements, due to separation point prediction sensitivity. It was further recommended to apply enhanced wall treatment to more accurately capture the viscous drag and separated flow structures. Overall, total drag was predicted within 5% at 0o angle of attack and 10% at 20o, each within experimental uncertainty. What is more, the form and induced drag predicted by CFD and measured by the wake traverse shared good agreement. Which indicated CFD captured the key flow features accurately despite simplification of the nacelle interior geometry.

Nafion-based composite electrolytes for proton exchange membrane fuel cells operating above 120C with titania nanoparticles and nanotubes as fillers

FAPESP:5150

Theoretical Performance Model and Initial Experimentation of a Baffled-Tube Ram Accelerator

Thesis (Master's)--University of Washington, 2016-08

Sequential Morphological Changes in the CNV Net after Intravitreal Anti-VEGF Evaluated with OCT Angiography

PURPOSE: To assess and describe sequential morphological changes in the choroidal neovascularization (CNV) net using optical coherence tomography angiography (OCTA) in patients undergoing treatment with intravitreal antivascular endothelial growth factor (VEGF). METHODS: Prospective cohort study. OCTA was performed sequentially: before (t0), 1 h (t1), 1 week (t2) and 1 month after the injection (t3), using Avanti RTVue XR equipped with the AngioVue® software (Optovue, Calif., USA). All images were classified by two independent graders. RESULTS: Ten eyes of 10 patients, with a mean age of 72.4 ± 10.5 years, were included. CNV morphology was described as tree-like in 5 eyes, glomerular in 1 and fragmented in 4. A fibrovascular capsule surrounding the CNV net was found in 4 eyes and a feeder trunk was noticed in 6. No changes were observed at t1. Loss of peripheral capillaries, vessel fragmentation and decreased vessel density were evident in 8 eyes at t2. The CNV capillary density and the peripheral anastomosis increased in all of these at t3. Two eyes remained unchanged through the whole length of follow-up. CONCLUSIONS: Significant changes in the CNV net can be observable in OCTA at least 1 week after intravitreal anti-VEGF. The safety of frequent examinations may provide a method of gauging treatment effects.

Early stage memory loss interventions: utilization, impact, and the experience of living alone.

Thesis (Ph.D.)--University of Washington, 2016-08