A crise econômica de 2008 e a Rússia: consequências e fragilidade da economia russa.

Esta dissertação tem como objetivo geral analisar as conseqüências da crise de 2008 na economia russa e como objetivos específicos: apontar as fragilidades da economia russa e a sua consequente vulnerabilidade a choques econômicos externos, além de analisar os efeitos da dependência do petróleo na geração de receitas para o governo e para o PIB do país no contexto da crise. Dessa forma, o trabalho será dividido em cinco partes: Introdução, Capítulo 2 - onde se discutirá a Crise de 2008 e os seus efeitos na economia global, Capítulo 3 - onde se abordará a crise e a Rússia, Capítulo 4 - onde será analisada a dependência russa, através de um teste estatístico de regressão linear simples, em relação às exportações de gás natural e mais profundamente às de petróleo e Conclusão.

Uma análise da jurisprudência do CADE acerca dos cartéis na revenda de combustíveis

Esta monografia analisa as decisões do Conselho Administrativo de Defesa Econômica (Cade) acerca dos cartéis no setor de revenda de combustíveis, com o objetivo de identificar as características do referido setor que propiciam a formação de cartel, bem como verificar as provas utilizadas como fundamento nas decisões e a participação da Agência Nacional do Petróleo, Gás Natural e Combustível (ANP) na defesa da concorrência no setor. Para introduzir o tema, foram apresentados alguns conceitos relevantes, como “cartel”, “acordo de leniência”, e “termo de compromisso de cessação de conduta”. Em seguida, de modo a delimitar a competência de cada um dos órgãos atuantes no setor, foi realizada uma análise da divisão de competências entre o Cade e a ANP. Dentre os resultados obtidos através de pesquisa processual, com o objetivo de levantar os Processos Administrativos levados a julgamento perante o Cade, foi destacada e aprofundada a análise da participação de Sindicatos como sendo o principal agente na formação de cartéis envolvendo a revenda de combustíveis, os tipos de provas utilizadas nas decisões do órgão antitruste e a valoração dos estudos econômicos realizados pela ANP. A conclusão deste estudo demonstra que os altos números de denúncias envolvendo a prática de cartel no setor são fundadas em indícios insuficientes para uma possível condenação, pois o Cade tem decidido tais casos com base em estudos especializados e provas capazes de comprovar efetivamente a ocorrência de cartel.

Da revolução do gás não convencional nos EUA tendo como substrato uma interferência governamental persistente no estímulo a atividade econômica e no fomento as inovações tecnológicas afetas ao setor

O presente estudo versa sobre os fatores tecnológicos e ambientais que vêm resultando no crescimento da produção de gás natural não convencional nos EUA. Os objetos de analise principais serão as políticas públicas, assim como a dinâmica entre os atores sociais e o ambiente propício que fora criado para que houvesse o adensamento do fomento e do estímulo às inovações tecnológicas sucedidas no setor.

Biogás no estado de São Paulo: novo potencial em um mercado restringido

O trabalho tem como objetivo apresentar o aproveitamento de biogás de aterros como uma alternativa potencial à utilização de gás natural no Estado de São Paulo. O trabalho descreve a produção de biogás e os principais desafios para levar o produto final ao mercado. São descritos os benefícios, tanto econômicos e energéticos quanto ambientais, do aproveitamento de um recurso que é geralmente esquecido. O trabalho analisará o perfil da produção de biogás de aterros no Brasil e como a regulação interage com uma indústria que em grande parte é nova. O trabalho propõe umas ideias a respeito de fontes de verbas para novos projetos, além de analisar algumas experiências internacionais. Utilizando teoria econômica, o trabalho tentará mostrar como esta fonte de energia poderia ser introduzida no mercado, mesmo sob condições econômicas desafiadoras.

Políticas de conteúdo local: crescimento econômico e rule of law

As chamadas Políticas de Conteúdo Local (“PCLs”) fazem parte de um grupo de políticas desenvolvimentistas adotadas em todo o mundo com o objetivo de maximizar os benefícios sociais e econômicos decorrentes de determinadas atividades econômicas. Neste trabalho, analisaram-se, principalmente, as PCLs relativas à extração e produção de petróleo e gás. O instituto é juridicamente polêmico, uma vez que, além de ser difícil de definir, é instrumentalizado por diversos atos normativos diferentes. Tal situação agrava-se com o fato de que o desenho de cada PCL pode sugerir ou impor diversas medidas de implementação diferentes, com impactos nas diferentes áreas do Direito. Considerando este cenário, aponta-se que o principal objetivo deste trabalho é a análise de transplantes ao nosso ordenamento jurídico de PCLs bem-sucedidas em ordenamentos jurídicos estrangeiros. Para isso, demonstrou-se, em um primeiro momento, que o instituto das PCLs deve ser reinterpretado à luz da Constituição vigente. Isso porque as PCLs foram criadas em uma época em que a escola desenvolvimentista principal era a keynesiana, que foi substituída atualmente pela escola do Rule of Law. Embora nosso ordenamento jurídico tenha acompanhado essa evolução (através de Emendas Constitucionais e adoção de determinadas leis), as PCLs não acompanharam e, por isso, precisam sofrer essa releitura. Nesse sentido, extraíram-se da Lei quatro elementos principais que as PCLs devem preencher para estar em consonância com o Rule of Law: (A) Benefícios aos Consumidores Finais; (B) Sustentabilidade; (C) Transetorialidade; e (D) Ampliação do Mercado de Trabalho. Em sequência, classificaram-se as diversas PCLs mapeadas, exemplificando cada uma. Ao longo da classificação, apontaram-se três critérios que facilitam a identificação das maiores dificuldades jurídicas em cada transplante: (A) Canal; (B) Natureza; e (C) Instrumento. Por fim, quatro PCLs estrangeiras bem-sucedidas foram escolhidas para uma análise mais aprofundada: a Kazakhstan Contract Agency, no Cazaquistão, a Petro Arctic Supplier Asssociation, na Noruega, o Australian Industry Participation Plan na Austrália e o Nigerian Oil & Gas Content Industry Development Act, na Nigéria. Para cada uma, é dedicada uma análise especial. As análises são seguidas pela Conclusão.

A evolução das receitas provenientes dos royalties do petróleo e seus impactos na arrecadação dos tributos de competência municipal (2002 – 2007): o caso do município de Cabo Frio/RJ

Há cerca de dez anos os municípios confrontantes com a Bacia de Campos vem registrando contínuo e vigoroso aumento das receitas oriundas das participações governamentais incidentes sobre a exploração e produção de petróleo e gás natural em função da Lei Federal n° 9.478/98 que, entre outras medidas, ampliou as alíquotas básicas de royalties de 5% para até 10% do valor da produção bem como instituiu o pagamento de participações especiais sobre o lucro obtido em campos de grande produção ou rentabilidade. Nesse trabalho buscamos analisar o comportamento, na Prefeitura Municipal de Cabo Frio, das receitas em epígrafe durante o período compreendido entre os exercícios financeiros de 2002 a 2007, verificando os efeitos quantitativos produzidos nos tributos arrecadados por aquele Executivo, bem como avaliando as gestões, através da análise dos dados coletados, no sentido de determinar em qual delas houve maior efetividade na arrecadação tributária. O estudo em tela pretende ser uma fonte de informações para futuros gestores, auxiliando-os na condução de políticas fiscais e administrativas que visem incrementar a arrecadação.

Síntese e caracterização de NiO-CGO para anodo e eletrólitos sólidos e base de Céria para SOFC

The direct use of natural gas makes the Solid Oxide Fuel Cell (SOFC) potentially more competitive with the current energy conversions technologies. The Intermediate Temperature SOFC (IT-SOFC) offer several advantages over the High Temperature SOFC (HT-SOFC), which includes better thermal compatibility among components, fast start with lower energy consumption, manufacture and operation cost reduction. The CeO2 based materials are alternatives to the Yttria Stabilized Zirconia (YSZ) to application in SOFC, as they have higher ionic conductivity and less ohmic losses comparing to YSZ, and they can operate at lower temperatures (500-800°C). Ceria has been doped with a variety of cations, although, the Gd3+ has the ionic radius closest to the ideal one to form solid solution. These electrolytes based in ceria require special electrodes with a higher performance and chemical and termomechanical compatibility. In this work compounds of gadolinia-doped ceria, Ce1-xGdxO2-δ (x = 0,1; 0,2 and 0,3), used as electrolytes, were synthesized by polymeric precursors method, Pechini, as well as the composite material NiO - Ce0,9Gd0,1O1,95, used as anode, also attained by oxide mixture method, mixturing the powders of the both phases calcinated already. The materials were characterized by X ray diffraction, dilatometry and scanning electronic microscopy. The refinement of the diffraction data indicated that all the Ce1-xGdxO2-δ powders were crystallized in a unique cubic phase with fluorite structure, and the composite synthesized by Pechini method produced smaller crystallite size in comparison with the same material attained by oxide mixture method. All the produced powders had nanometric characteristics. The composite produced by Pechini method has microstructural characteristics that can increase the triple phase boundaries (TPB) in the anode, improving the cell efficiency, as well as reducing the mass transport mechanism effect that provokes anode degradation

Sinterização de Ce1-XEuXO2-(X/2) para aplicação como eletrólito sólido em células a combustível de temperaturas intermediárias

Given the environmental concern over global warming that occurs mainly by emission of CO2 from the combustion of petroleum, coal and natural gas research focused on alternative and clean energy generation has been intensified. Among these, the highlight the solid oxide fuel cell intermediate temperature (IT-SOFC). For application as electrolyte of the devices doped based CeO2 with rare earth ions (TR+ 3) have been quite promising because they have good ionic conductivity and operate at relatively low temperatures (500-800 ° C). In this work, studied the Ce1-xEuxO2-δ (x = 0,1, 0,2 and 0,3), solid solutions synthesized by the polymeric precursor method to be used as solid electrolyte. It was also studied the processing steps of these powders (milling, compaction and two step sintering) in order to obtain dense sintered pellets with reduced grain size and homogeneous microstructure. For this, the powders were characterized by thermal analysis, X-ray diffraction, particle size distribution and scanning electrons microscopy, since the sintered samples were characterized by dilatometry, scanning electrons microscopy, density and grain size measurements. By x-ray diffraction, it was verified the formation of the solid solution for all compositions. Crystallites in the nanometric scale were found for both sintering routes but the two step sintering presented significant reduction in the average grain size

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Efeito da velocidade de aquecimento nas propriedades de produtos da cerâmica estrutural

Heating rate is one of the main variables that determine a fire cycle. In industrial processes that use high temperatures, greater fire great can reduce the cost of production and increase productivity. The use of faster and more efficient fire cycles has been little investigated by the structural ceramic industry in Brazil. However, one of the possibilities that aims at modernizing the sector is the use of roller kilns and the inclusion of natural gas as fuel. Thus, the purpose of this study is to investigate the effect of heating rate on the technological properties of structural ceramic products. Clay raw materials from the main ceramic industries in the state of Rio Grande do Norte were characterized. Some of the raw materials characterized were formulated to obtain the best physical and mechanical properties. Next, raw materials and formulations were selected to study the influence of heating rate on the final properties of the ceramic materials. The samples were shaped by pressing and extrusion and submitted to rates of 1 °C/min, 10 °C/min and 20 °C/min, with final temperatures of 850 °C, 950 °C and 1050 °C. Discontinuous cycles with rates of 10 °C/min or 15 °C/min up to 600 °C and a rate of 20 °C/min up to final temperature were also investigated. Technological properties were determined for all the samples and microstructural analysis was carried out under a number of fire conditions. Results indicate that faster and more efficient fire cycles than those currently in practice could be used, limiting only some clay doughs to certain fire conditions. The best results were obtained for the samples submitted to slow cycles up to 600 °C and fast fire sinterization up to 950 °C. This paper presents for the first time the use of a fast fire rate for raw materials and clay formulations and seeks to determine ideal dough and processing conditions for using shorter fire times, thus enabling the use of roller kilns and natural gas in structural ceramic industries

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Análise das emissões gasosas de um veículo flex funcionando com diferentes combustíveis

Efforts in research and development of new technologies to reduce emission levels of pollutant gases in the atmosphere has intensified in the last decades. In this context, it can be highlighted the modern systems of electronic engine management, new automotive catalysts and the use of renewable fuels which contributes to reduce the environmental impact. The purpose of this study was a comparative analysis of gas emissions from a automotive vehicle, operating with different fuels: natural gas, AEHC or gasoline. To execute the experimental tests, a flex vehicle was installed on a chassis dynamometer equipped with a gas analyzer and other complementary accessories according to the standard guidelines of emission and security procedures. Tests were performed according to NBR 6601 and NBR 7024, which define the urban and road driving cycle, respectively. Besides the analysis of exhaust gases in the discharge tube, before and after the catalyst, using the suction probe of the gas analyzer to simulate the vehicle in urban and road traffic, were performed tests of fuel characterization. Final results were conclusive in indicating leaded gasoline as the fuel which most contributed with pollutant emissions in atmosphere and the usual gasoline being the fuel which less contributed with pollutant emissions in atmosphere

Avaliação da corrosão em dutos por técnica gravimétrica e de resistência elétrica

With the increasing of demand for natural gas and the consequent growth of the pipeline networks, besides the importance of transport and transfer of oil products by pipeline, and when it comes to product quality and integrity of the pipeline there is an important role regarding to the monitoring internal corrosion of the pipe. This study aims to assess corrosion in three pipeline that operate with different products, using gravimetric techniques and electrical resistance. Chemical analysis of residues originated in the pipeline helps to identify the mechanism corrosive process. The internal monitoring of the corrosion in the pipelines was carried out between 2009 and 2010 using coupon weight loss and electrical resistance probe. Physico-chemical techniques of diffraction and fluorescence X-rays were used to characterize the products of corrosion of the pipelines. The corrosion rate by weight loss was analyzed for every pipeline, only those ones that has revealed corrosive attack were analyzed located corrosion rate. The corrosion potential was classified as low to pipeline gas and ranged from low to severe for oil pipelines and the pipeline derivatives. Corrosion products were identified as iron carbonate, iron oxide and iron sulfide

Acordos internacionais sobre a produção compartilhada de recursos naturais: a unitização interestatal na área do petróleo e gás sob o enfoque constitucional brasileiro

The apportionment of natural resources between sovereign States is a subject that relates many aspects of International law, as long as Constitutional Law, at the execution and application phases of international treaties that regulates the exploration of common goods. In this sense, because of their natural characteristics that creates an environment of constant migration and fixation in transboundary regions, terrestrial or maritime, the petroleum and the natural gas bound a complex juridical apparatus that can control the sovereign rights involved. This research is aim at accomplishing a study concerning the international agreements that enable the non-unilateral action, specifically the unitization treaties between sovereign States, as a manner to resolve situations related to the individualization of oil and/or gas reservoirs that go across their national borders. These agreements will be analyzed considering the international public law sources theory, bearing in mind yet the already existed experiences in this sense, not disregarding the way that this fact could affect Brazil. It will begin with an historical incursion over the unitization institute, covering its main characteristics and its formation and execution procedures, and finally it will address the Brazilian legal system and the comparative law threats the institute. The clauses of these relevant agreements will be analyzed in details, concerning its particularities and its contents. Because these agreements are international obligatory rules of law, it is indispensable that they are considered under the auspices of the international law system, focusing their nature and the subjects of international law and establishing them as sources of the international law, analyzing them, then, as international rules and the applicable law to these juridical relations, the conventional established, the consolidated international custom and the applicable International Law principles, appearing the State s responsibility as an important subject for the verification of the acts lawful practiced by States. The analysis of the apportionment of these natural resources ends with the individualization of possible exploitable marine oil fields located between the exclusive economic zone and the continental platform ends and the region administrated by the International Seabed Authority. At last, the Brazilian constitutional system appears as the mechanism of integration, application and execution of the international unitization agreements in Brazil, detaching the format and the proceedings that the international treaties take to acquire validity at the national legal system, passing through the treaties interpretation and the applicable constitutional principles, coming to its application in Brazil, considering the existing constitutional peculiarities and the role played by the National Agency of Petroleum, Natural Gas and bio-fuel ANP