Geochemistry, grain sizes and radiocarbon age of sediment core Lz1005 from Amery Oasis, East Antarctica

The clay mineralogical composition of a 552 cm long sediment core from Lake Terrasovoje in Amery Oasis, East Antarctica, was analysed and compared with that in surface sediments from other locations in the vicinity. The lower part of the sediment core is formed by sub- and proglacial sediments with a dominance of smectite and illite, and lower amounts of kaolinite and chlorite. The upper part of the core is deposited after 12 500 cal yr bp and mainly composed of illite and kaolinite, with low amounts of smectite and chlorite, such as found in samples from rock outcrops and covering sediments throughout Amery Oasis. The clay composition in the lower section of core Lz1005 suggest that the basin of Lake Terrasovoje was filled by a 150-200 m thickened Nemesis Glacier prior to 12 500 cal yr bp rather than by local ice caps.

Geochemistry of ODP Hole 128-798B

The capability of determining elemental concentrations through geochemical logging has recently been established. However, the quality of these data obtained in some environments has yet to be quantified. We assess the quality of geochemical logs compared with XRF results from a suite of core samples from Hole 798B. The resulting core/log correlations are only fair, because the tool has been adversely affected by the very high porosity of the formation. The results, however, do fall within the statistical uncertainties predicted by the processing. The recent application of a modified boron sleeve to the Ocean Drilling Program's geochemical logging tool is shown to reduce interference of borehole chlorine on the resultant chemistry.

Petrology, geochemistry and K-Ar Age determination of De Gerlache Seamount basalts

The De Gerlache Seamounts are two topographic highs in the Bellingshausen Sea, southeastern Pacific. Petrological and geochemical studies together with K-Ar age determinations were carried out on four dredged basalt samples collected during a RV Polarstern expedition (ANT-XII/4) in 1995. Minor and trace element composition suggest alkaline basalt compositions. Compared to alkaline basalts of adjacent West Antarctica (the Jones Mountains) and of Peter I Island, the samples have lower mg-numbers, lower Ni and Cr contents and lower high field-strength elements (HFSE)/Nb and large-ion lithophile elements (LILE)/HFSE ratios. Three of the four samples have low K, Rb, and Cs concentrations relative to alkaline basalts. The K-depletion and other elemental concentrations may be explained by 1.1% melting of amphibole bearing mantle material. Additionally, low Rb and Ba values suggest low concentrations of these elements in the mantle source. K-Ar age determinations yield Miocene ages (20-23 Ma) that are similar in age to other alkaline basalts of West Antarctica (Thurston Island, the Jones Mountains, Antarctic Peninsula) and the suggested timing of onset of Peter I Island volcanism (~10-20 Ma). The occurrence of the DGS and Peter I Island volcanism along an older but reactivated tectonic lineation suggests that the extrusions exploited a zone of pre-existing lithospheric weakness. The alkaline nature and age of the DGS basalts support the assumption of plume activity in the Bellingshausen Sea.

Sedimentology, geochemistry and paleomagnetic of ODP Hole 151-913B

The Eocene and Oligocene epochs (55 to 23 million years ago) comprise a critical phase in Earth history. An array of geological records (Zachos et al., 2001, doi:10.1126/science.1059412; Lear et al., 2000, doi:10.1126/science.287.5451.269; Coxall et al., 2005, doi:10.1038/nature03135; Pekar et al., 2005; doi:10.1130/B25486.1; Strand et al., 2003, doi:10.1016/S0031-0182(03)00396-1) supported by climate modelling (DeConto and Pollard, 2003, doi:10.1038/nature01290) indicates a profound shift in global climate during this interval, from a state that was largely free of polar ice caps to one in which ice sheets on Antarctica approached their modern size. However, the early glaciation history of the Northern Hemisphere is a subject of controversy (Coxall et al., 2005, doi:10.1038/nature03135; Tripati et al., 2005, doi:10.1038/nature03874; Wolf-Welling et al., 1996, doi:10.2973/odp.proc.sr.151.139.1996; Moran et al., 2006, doi:10.1038/nature04800). Here we report stratigraphically extensive ice-rafted debris, including macroscopic dropstones, in late Eocene to early Oligocene sediments from the Norwegian-Greenland Sea that were deposited between about 38 and 30 million years ago. Our data indicate sediment rafting by glacial ice, rather than sea ice, and point to East Greenland as the likely source. Records of this type from one site alone cannot be used to determine the extent of ice involved. However, our data suggest the existence of (at least) isolated glaciers on Greenland about 20 million years earlier than previously documented (Winkler et al., 2002, doi:10.1007/s005310100199), at a time when temperatures and atmospheric carbon dioxide concentrations were substantially higher.

Fe-Mn crusts from the Atlantic Ocean

Mineral and chemical compositions of a set of crust samples collected from the North, Central and South Atlantic were examined by means of analytical electron microscopy and ICP-MS, chemical, and microchemical elemental analysis. Vernadite, asbolane, and goethite are dominant mineral phases of the crusts, ferrihydrite is minor, hematite and feroxyhyte are rare. The samples show wide variability in major and trace element contents; however, their characteristic geochemical signatures indicate hydrogenous origin. A comparison between compositions of oceanic hydrogenous and hydrothermal crusts and metalliferous hydrothermal sediments from different ocean areas suggests that the geochemical approach may be insufficient in some cases and fail to identify hydrothermal input in ferromanganese crusts of mixed composition.

Analysis of Mn nodules from cruise GH72-2

The GH72-2 shipborne survey was carried out in the northwest Pacific during 31 days under the 'Basic investigations for exploration of deep sea mineral resources' program. The sediments encountered could be classified as follows: 1) Most of the brown clays occur on the abyssal plain of the basins at depth over 4500m. 2) Calcareous oozes are predominant at the top, slope and foot of seamounts and guyots. 3) Terrigeneous sediments are distributed near islands. The concentrated zone of ferromanganese nodules was located in the Magellan seamounts area. However, the metal contents in Mn, Cu, Ni and Co for these nodules are relatively poor, and these ferromanganese deposits occur at a depth over 5000m. It is interesting to note that the shape of the nodules is sometimes nearly spherical, and that the chemical composition of the nodules is characterized by the low ratio Mn/Fe and Co/Ni.

Geochemistry, minerals and b-parameter at DSDP Leg 70 Holes

Clay minerals recovered from the Galapagos hydrothermal mounds (Holes 506C, 507D, and 509B) are mainly iron-rich nontronite-like minerals enriched in potassium. Nontronites from Hole 509B show a distinct tendency to become micaceous toward the lower beds of clay sediments. Mn-crusts consist mainly of todorokite or a mixture of todorokite and nontronite. Minerals of clay and Mnrich sediments in the mounds originated from hydrothermal solutions of uncertain origin. Pelagic oozes from hydrothermal mounds and from areas between mounds (Hole 506D) consist mainly of calcite. In the carbonate beds on or near the hydrothermal mounds an admixture of smectite is often found.

Geochemistry of silicate melt inclusions from ODP Holes 137-504B and 140-504B

Geochemical data from plagioclase-hosted silicate melt inclusions from Leg 140, Hole 504B diabase dikes are reported. Hand-picked plagioclase grains were heated to 1260°-1280°C to remelt the glass inclusions and to infer trapping temperatures. The samples were then polished to expose the inclusions, which were analyzed by electron and ion microprobes. Inclusion compositions are mainly in equilibrium with the host plagioclase and are more depleted in incompatible elements than the host rock. Simple crystal-liquid equilibrium calculations show that the melt inclusions could have been in equilibrium with depleted abyssal peridotite diopsides, whereas whole-rock basalt compositions generally could not have been. The melt inclusions are significantly more depleted than normal (N-type) mid-ocean-ridge basalt (MORB) and are consistent with being produced by 8%-16% incremental or open-system melting with 2% residual porosity in the peridotite source. These magmas were formed during pressure-release melting of the mantle over a range of depths between 30 and 15 km.

Major and trace element concentration of melt inclusions from Zhupanovsky volcano, Kamchatka

The paper presents data on naturally quenched melt inclusions in olivine (Fo 69-84) from Late Pleistocene pyroclastic rocks of Zhupanovsky volcano in the frontal zone of the Eastern Volcanic Belt of Kamchatka. The composition of the melt inclusions provides insight into the latest crystallization stages (~70% crystallization) of the parental melt (~46.4 wt % SiO2, ~2.5 wt % H2O, ~0.3 wt % S), which proceeded at decompression and started at a depth of approximately 10 km from the surface. The crystallization temperature was estimated at 1100 ± 20°C at an oxygen fugacity of deltaFMQ = 0.9-1.7. The melts evolved due to the simultaneous crystallization of olivine, plagioclase, pyroxene, chromite, and magnetite (Ol: Pl: Cpx : (Crt-Mt) ~ 13 : 54 : 24 : 4) along the tholeiite evolutionary trend and became progressively enriched in FeO, SiO2, Na2O, and K2O and depleted in MgO, CaO, and Al2O3. Melt crystallization was associated with the segregation of fluid rich in S-bearing compounds and, to a lesser extent, in H2O and Cl. The primary melt of Zhupanovsky volcano (whose composition was estimated from data on the most primitive melt inclusions) had a composition of low-Si (~45 wt % SiO2) picrobasalt (~14 wt % MgO), as is typical of parental melts in Kamchatka and other island arcs, and was different from MORB. This primary melt could be derived by ~8% melting of mantle peridotite of composition close to the MORB source, under pressures of 1.5 ± 0.2 GPa and temperatures 20-30°C lower than the solidus temperature of 'dry' peridotite (1230-1240°C). Melting was induced by the interaction of the hot peridotite with a hydrous component that was brought to the mantle from the subducted slab and was also responsible for the enrichment of the Zhupanovsky magmas in LREE, LILE, B, Cl, Th, U, and Pb. The hydrous component in the magma source of Zhupanovsky volcano was produced by the partial slab melting under water-saturated conditions at temperatures of 760-810°C and pressures of ~3.5 GPa. As the depth of the subducted slab beneath Kamchatkan volcanoes varies from 100 to 125 km, the composition of the hydrous component drastically changes from relatively low-temperature H2O-rich fluid to higher temperature H2O-bearing melt. The geothermal gradient at the surface of the slab within the depth range of 100-125 km beneath Kamchatka was estimated at 4°C/km.

Chemical composition of basalts from ODP Leg 115

Leg 115 of the Ocean Drilling Program recovered basalts from four locations along the hotspot track that leads from the Deccan flood basalts in India to Reunion Island in the western Indian Ocean (Sites 706, 707, 713, and 715). The drilled basalts range in age from 35 Ma (Site 706) to 64 Ma (Site 707), and including the Deccan basalts (66 to 68 Ma), Mauritius Island (0.2 to 8 Ma), and Reunion Island (0 to 2 Ma), seven sites are provided for sampling the volcanic record of the 5000-km-long hotspot track. Chemical and age comparisons indicate that Site 707 lavas correlate with basalt units near the top of the Deccan flood basalt sequence. The lavas of Site 715 (55 to 60 Ma) are most similar to the islands of Mauritius and Reunion. Site 713 basalts (48 Ma) are similar to the earliest lavas of the Deccan province, and Site 706 basalts are intermediate in chemistry between those of central Indian spreading-ridge basalts and Reunion. Differences in lava compositions along the hotspot track can be related to variable mixing of plume and asthenospheric mantle, depending on the changing position of spreading-ridge segments and the hotspot during the opening of the Indian Ocean. Alternatively, time-dependent changes in the composition of hotspot melts may be due to a decrease in partial melting of a heterogeneous plume or to intrinsic changes in the composition of material supplied by the plume.

Age and chemical composition of volcaniclastic rocks from the Sea of Japan

Petrographic and geochemical studies showed that Oligocene - Early Miocene volcaniclastic rocks from the southern part of the Sea of Japan are ascribed to high-potassium aluminous rocks of sub-alkaline volcanic series from active continental margins. A comparative analysis revealed spatiotemporal relation of Oligocene - Early Miocene subaerial volcanism of the Sea of Japan with Late Cretaceous and Eocene - Early Miocene ignimbrite volcanism of the East Eurasian margin. This allows to refer the volcaniclastic rocks of the Sea of Japan to the stage of ignimbrite volcanism that occurred during relative quiescence against general extension in the continental margin setting.

Investigation of manganese nodules from the Malvinas (Falkland) Plateau

Manganese nodules occurring within marine sediments of presumably Upper Miocene-Lower Pliocene age from cores obtained by the Argentine oceanographic vessel ARA Islas Orcadas in 1977 on the Malvinas (Falkland) Plateau and neighbouring Scotia Sea were studied with the aim of comparing them with other fossil nodules found on the mainland of Argentina that were also ascribed to the marine environment. After optical mineralogical, chemical, X-ray and trace element analysis, the studied "nodules" proved to be actually wacke clasts cemented by manganese oxides with a high Fe/Mn ratio corresponding to a continental environment. The studied "nodules" thus differ from the Argentine mainland nodules and are supposed to have been transported from continental environments and then deposited in the marine realms. The wacke clasts became then nuclei for the deposition of the marine manganese oxides of the coatings. The proportion of trace elements, which is high, suggests the growth of the nodules in the marine environment.

A study of the formation of amorphous calcium phosphate and hydroxyapatite on melt quenched Bioglass(A (R)) using surface sensitive shallow angle X-ray diffraction

Melt quenched silicate glasses containing calcium, phosphorous and alkali metals have the ability to promote bone regeneration and to fuse to living bone. These glasses, including 45S5 Bioglass(A (R)) [(CaO)(26.9)(Na2O)(24.4)(SiO2)(46.1)(P2O5)(2.6)], are routinely used as clinical implants. Consequently there have been numerous studies on the structure of these glasses using conventional diffraction techniques. These studies have provided important information on the atomic structure of Bioglass(A (R)) but are of course intrinsically limited in the sense that they probe the bulk material and cannot be as sensitive to thin layers of near-surface dissolution/growth. The present study therefore uses surface sensitive shallow angle X-ray diffraction to study the formation of amorphous calcium phosphate and hydroxyapatite on Bioglass(A (R)) samples, pre-reacted in simulated body fluid (SBF). Unreacted Bioglass(A (R)) is dominated by a broad amorphous feature around 2.2 A...(-1) which is characteristic of sodium calcium silicate glass. After reacting Bioglass(A (R)) in SBF a second broad amorphous feature evolves similar to 1.6 A...(-1) which is attributed to amorphous calcium phosphate. This feature is evident for samples after only 4 h reacting in SBF and by 8 h the amorphous feature becomes comparable in magnitude to the background signal of the bulk Bioglass(A (R)). Bragg peaks characteristic of hydroxyapatite form after 1-3 days of reacting in SBF.

An examination of the calcium and strontium site distribution in bioactive glasses through isomorphic neutron diffraction, X-ray diffraction, EXAFS and multinuclear solid state NMR.

Strontium has been substituted for calcium in the glass series (SiO2)49.46(Na2O)26.38(P2O5)1.07(CaO)23.08x(SrO)x (where x = 0, 11.54, 23.08) to elucidate their underlying atomic-scale structural characteristics as a basis for understanding features related to the bioactivity. These bioactive glasses have been investigated using isomorphic neutron and X-ray diffraction, Sr K-edge EXAFS and solid state 17O, 23Na, 29Si, 31P and 43Ca magic-angle-spinning (MAS) NMR. An effective isomorphic substitution first-order difference function has been applied to the neutron diffraction data, confirming that Ca and Sr behave in a similar manner within the glass network, with residual differences attributed to solely the variation in ionic radius between the two species. The diffraction data provides the first direct experimental evidence of split Ca–O nearest-neighbour correlations in these melt quench bioactive glasses, together with an analogous splitting of the Sr–O correlations; the correlations are attributed to the metal ions correlated either to bridging or to non-bridging oxygen atoms. Triple quantum (3Q) 43Ca MAS NMR corroborates the split Ca–O correlations. Successful simplification of the 2 < r (A) < 3 region via the difference method has also revealed two distinct Na environments. These environments are attributed to sodium correlated either to bridging or to nonbridging oxygen atoms. Complementary multinuclear MAS NMR, Sr K-edge EXAFS and X-ray diffraction data supports the structural model presented. The structural sites present will be intimately related to their release properties in physiological fluids such as plasma and saliva, and hence the bioactivity of the material. Detailed structural knowledge is therefore a prerequisite for optimising material design.