Atmospheric corrosion of quaternary bronzes (Cu-Sn-Zn-Pb): laboratory tests (accelerated ageing in wet & dry conditions)and field studies (the Bottego monument in Parma, Italy).

The interactions between outdoor bronzes and the environment, which lead to bronze corrosion, require a better understanding in order to design effective conservation strategies in the Cultural Heritage field. In the present work, investigations on real patinas of the outdoor monument to Vittorio Bottego (Parma, Italy) and laboratory studies on accelerated corrosion testing of inhibited (by silane-based films, with and without ceria nanoparticles) and non-inhibited quaternary bronzes are reported and discussed. In particular, a wet&dry ageing method was used both for testing the efficiency of the inhibitor and for patinating bronze coupons before applying the inhibitor. A wide range of spectroscopic techniques has been used, for characterizing the core metal (SEM+EDS, XRF, AAS), the corroded surfaces (SEM+EDS, portable XRF, micro-Raman, ATR-IR, Py-GC-MS) and the ageing solutions (AAS). The main conclusions were: 1. The investigations on the Bottego monument confirmed the differentiation of the corrosion products as a function of the exposure geometry, already observed in previous works, further highlighting the need to take into account the different surface features when selecting conservation procedures such as the application of inhibitors (i.e. the relative Sn enrichment in unsheltered areas requires inhibitors which effectively interact not only with Cu but also with Sn). 2. The ageing (pre-patination) cycle on coupons was able to reproduce the relative Sn enrichment that actually happens in real patinated surfaces, making the bronze specimens representative of the real support for bronze inhibitors. 3. The non-toxic silane-based inhibitors display a good protective efficiency towards pre-patinated surfaces, differently from other widely used inhibitors such as benzotriazole (BTA) and its derivatives. 4. The 3-mercapto-propyl-trimethoxy-silane (PropS-SH) additivated with CeO2 nanoparticles generally offered a better corrosion protection than PropS-SH.

Studio di fenomeni d'instabilità gravitativa sui fondali marini, con particolare riferimento all'isola di Stromboli

In the last decade the interest for submarine instability grew up, driven by the increasing exploitation of natural resources (primary hydrocarbons), the emplacement of bottom-lying structures (cables and pipelines) and by the development of coastal areas, whose infrastructures increasingly protrude to the sea. The great interest for this topic promoted a number of international projects such as: STEAM (Sediment Transport on European Atlantic Margins, 93-96), ENAM II (European North Atlantic Margin, 96-99), GITEC (Genesis and Impact of Tsunamis on the European Coast 92-95), STRATAFORM (STRATA FORmation on Margins, 95-01), Seabed Slope Process in Deep Water Continental Margin (Northwest Gulf of Mexico, 96-04), COSTA (Continental slope Stability, 00-05), EUROMARGINS (Slope Stability on Europe’s Passive Continental Margin), SPACOMA (04-07), EUROSTRATAFORM (European Margin Strata Formation), NGI's internal project SIP-8 (Offshore Geohazards), IGCP-511: Submarine Mass Movements and Their Consequences (05-09) and projects indirectly related to instability processes, such as TRANSFER (Tsunami Risk ANd Strategies For the European region, 06-09) or NEAREST (integrated observations from NEAR shore sourcES of Tsunamis: towards an early warning system, 06-09). In Italy, apart from a national project realized within the activities of the National Group of Volcanology during the framework 2000-2003 “Conoscenza delle parti sommerse dei vulcani italiani e valutazione del potenziale rischio vulcanico”, the study of submarine mass-movement has been underestimated until the occurrence of the landslide-tsunami events that affected Stromboli on December 30, 2002. This event made the Italian Institutions and the scientific community more aware of the hazard related to submarine landslides, mainly in light of the growing anthropization of coastal sectors, that increases the vulnerability of these areas to the consequences of such processes. In this regard, two important national projects have been recently funded in order to study coastal instabilities (PRIN 24, 06-08) and to map the main submarine hazard features on continental shelves and upper slopes around the most part of Italian coast (MaGIC Project). The study realized in this Thesis is addressed to the understanding of these processes, with particular reference to Stromboli submerged flanks. These latter represent a natural laboratory in this regard, as several kind of instability phenomena are present on the submerged flanks, affecting about 90% of the entire submerged areal and often (strongly) influencing the morphological evolution of subaerial slopes, as witnessed by the event occurred on 30 December 2002. Furthermore, each phenomenon is characterized by different pre-failure, failure and post-failure mechanisms, ranging from rock-falls, to turbidity currents up to catastrophic sector collapses. The Thesis is divided into three introductive chapters, regarding a brief review of submarine instability phenomena and related hazard (cap. 1), a “bird’s-eye” view on methodologies and available dataset (cap. 2) and a short introduction on the evolution and the morpho-structural setting of the Stromboli edifice (cap. 3). This latter seems to play a major role in the development of largescale sector collapses at Stromboli, as they occurred perpendicular to the orientation of the main volcanic rift axis (oriented in NE-SW direction). The characterization of these events and their relationships with successive erosive-depositional processes represents the main focus of cap.4 (Offshore evidence of large-scale lateral collapses on the eastern flank of Stromboli, Italy, due to structurally-controlled, bilateral flank instability) and cap. 5 (Lateral collapses and active sedimentary processes on the North-western flank of Stromboli Volcano), represented by articles accepted for publication on international papers (Marine Geology). Moreover, these studies highlight the hazard related to these catastrophic events; several calamities (with more than 40000 casualties only in the last two century) have been, in fact, the direct or indirect result of landslides affecting volcanic flanks, as observed at Oshima-Oshima (1741) and Unzen Volcano (1792) in Japan (Satake&Kato, 2001; Brantley&Scott, 1993), Krakatau (1883) in Indonesia (Self&Rampino, 1981), Ritter Island (1888), Sissano in Papua New Guinea (Ward& Day, 2003; Johnson, 1987; Tappin et al., 2001) and Mt St. Augustine (1883) in Alaska (Beget& Kienle, 1992). Flank landslide are also recognized as the most important and efficient mass-wasting process on volcanoes, contributing to the development of the edifices by widening their base and to the growth of a volcaniclastic apron at the foot of a volcano; a number of small and medium-scale erosive processes are also responsible for the carving of Stromboli submarine flanks and the transport of debris towards the deeper areas. The characterization of features associated to these processes is the main focus of cap. 6; it is also important to highlight that some small-scale events are able to create damage to coastal areas, as also witnessed by recent events of Gioia Tauro 1978, Nizza, 1979 and Stromboli 2002. The hazard potential related to these phenomena is, in fact, very high, as they commonly occur at higher frequency with respect to large-scale collapses, therefore being more significant in terms of human timescales. In the last chapter (cap. 7), a brief review and discussion of instability processes identified on Stromboli submerged flanks is presented; they are also compared with respect to analogous processes recognized in other submerged areas in order to shed lights on the main factors involved in their development. Finally, some applications of multibeam data to assess the hazard related to these phenomena are also discussed.

La carriera degli attori italiani di prosa dalla scena allo schermo (1909-1916)

Most actors of the Italian silent cinema in the early 1910s have a theatrical training. Some of them are already asserted or famous actors (like Cesare Dondini, Ermete Novelli, Ermete Zacconi, Giovanni Grasso) who are invited “to pose” for the cinema following their reputation, according to a strategy of an aesthetic and cultural legitimacy launched in 1909 by film d'art of the Pathé Consortium. I think it is the proverbial readiness and strength of the stage Italian actors that create a decisive contribution to the rapid development of the national cinema industry, despite its serious structural deficiencies, from the protoindustrialized phase (1909) to the golden age of divismo (starting in 1913), until the first signs of decadence (1919), and the so-called “fall” of the UCI production and distribution system. This is the main topic of the thesis: an investigation on the Italian stage actors engaged in the film industry (“from stage to screen” as the Italian title says, but in a “post-Vardac” approach) through many different sources: periodicals, memories, personal and business letters, and also contracts, found in several archive funds. A specific chapter is dedicated to the artistic career of Febo Mari (1881-1939), real name Alfredo Rodriguez, witch is a time-sample symptomatic of deep ties established between the growing film publishing and the Italian theatrical production system in the 1910s. The Mari debut in cinema and his ascent toward screen “divo” status coincides with the parable that leads from emergence to decadence of divismo in Italy.

Contributo di un software di quantificazione del segnale contrastografico(SonoLiver®) nella diagnosi ecografica di Epatocarcinoma su Cirrosi.

Introduzione La diagnosi di HCC con le tecniche di immagine ed in particolare con CEUS su fegato cirrotico secondo le ultime linee guida prevede un comportamento contrastografico di ipervascolarizzazione nella fase arteriosa e wash-out nella fase tardiva. CEUS è ormai una metodica accettata per la diagnosi ma il wash out nella fase tardiva presenta notevoli difficoltà nel determinare il comportamento contrastografico in quanto valutato soggettivamente su display, infatti il giudizio di tale fase dipende molto dall’operatore e non è rarissimo che nascono discordanza tra operatori anche per piccole differenze. Recentemente è stato proposto un nuovo software(SonoLiver, Bracco, Italy) in grado di quantificare la perfusione delle lesione durante CEUS. Pertanto lo scopo di questo studio pilota è quello di valutare l’impatto di SonoLiver nel rilevare caratteristiche contrastografiche tipiche dell’HCC e valutare la riproducibilità tra due operatori. Pazienti e metodi: Sono stati presi in considerazione 20 noduli (di dimensioni tra 12-95 mm) con diagnosi di HCC in 20 pazienti con cirrosi . La CEUS è stata valutata dapprima ad occhio nudo su display e successivamente con le curve ottenute con DVP da parte di due operatori diversi in cieco, dopo un periodo di formazione adeguata. Sono state quindi analizzate le performance di ciascuna metodica sia in termini di variabilità tra i due operatori che la variabilità tra CEUS ad occhio nudo e CEUS con SonoLiver dello stesso operatore. Risultati:Operatore 1 ha rilevato ipervascolarizzazione in fase arteriosa in 17 su 20 pazienti con valutazione ad occhio nudo su schermo e su 19/20 con le curve ottenute con DVP (+10% sensibilità) mentre operatore 2 ha rilevato ipervascolarizzazione in fase arteriosa19/20 pazienti sia con valutazione ad occhio nudo che con le curve DVP. Nella fase tardiva il wash-out è stato rilevato in 7/20 ad occhio nudo e 10/20 pazienti con le curve DVP (sensibilità aumenta da 35% a 50%) mentre operatore 2 ha rilevato rispettivamente 8/20 e 11/20 (sensibilità aumenta da 40% a 55%). La riproducibilità tra i due operatori rimane invariata con la valutazione di Sonoliver sia nella fase arteriosa che nella fase tardiva. Conclusione:La quantificazione perfusionale con SonoLiver sembra essere uno strumento promettente nella diagnosi di HCC su fegato cirrotico, aumentando aspetti tipici contrastografici.

Farm tourism: a cross-country empirical study in Germany and Italy

PROBLEM In the last few years farm tourism or agritourism as it is also referred to has enjoyed increasing success because of its generally acknowledged role as a promoter of economic and social development of rural areas. As a consequence, a plethora of studies have been dedicated to this tourist sector, focusing on a variety of issues. Nevertheless, despite the difficulties of many farmers to orient their business towards potential customers, the contribution of the marketing literature has been moderate. PURPOSE This dissertation builds upon studies which advocate the necessity of farm tourism to innovate itself according to the increasingly demanding needs of customers. Henceforth, the purpose of this dissertation is to critically evaluate the level of professionalism reached in the farm tourism market within a marketing approach. METHODOLOGY This dissertation is a cross-country perspective incorporating the marketing of farm tourism studied in Germany and Italy. Hence, the marketing channels of this tourist sector are examined both from the supply and the demand side by means of five exploratory studies. The data collection has been conducted in the timeframe of 2006 to 2009 in manifold ways (online survey, catalogues of industry associations, face-to-face interviews, etc.) according to the purpose of the research of each study project. The data have been analyzed using multivariate statistical analysis. FINDINGS A comprehensive literature review provides the state of the art of the main differences and similarities of farm tourism in the two countries of study. The main findings contained in the empirical chapters provide insights on many aspects of agritourism including how the expectations of farm operators and customers differ, which development scenarios of farm tourism are more likely to meet individuals’ needs, how new technologies can impact the demand for farm tourism, etc. ORIGINALITY/VALUE The value of this study is in the investigation of the process by which farmers’ participation in the development of this sector intersects with consumer consumption patterns. Focusing on this process should allow farm operators and others including related businesses to more efficiently allocate resources.

Impatto ambientale di sistemi di riscaldamento domestico a biomasse: applicazione della metodologia LCA (Life Cycle Assessment)

Le biomasse hanno sempre rappresentato per l’umanità una fonte estremamente versatile e rinnovabile di risorse e tutt’oggi il loro impiego risulta vantaggioso in particolare per produrre energia termica ed elettrica attraverso processi di combustione, sistemi che tuttavia emettono sostanze dannose verso la salute umana e l’ecosistema. Queste pressioni ambientali hanno indotto alcune amministrazioni regionali (fra cui la Lombardia) a bandire temporaneamente l’installazione di nuovi impianti a biomasse, per prevenire e contenere le emissioni in atmosfera a tutela della salute e dell’ambiente. Il presente studio intende approfondire l’effetto ambientale di tali sistemi di riscaldamento domestico attraverso la tecnologia di analisi LCA (Life Cycle Assessment). Lo scopo dell’elaborato di Tesi consiste nell’eseguire un’analisi dell’intero ciclo di vita di due processi di riscaldamento domestico che utilizzino biomassa legnosa: una stufa innovativa a legna e una stufa a pellet. L’analisi ha quindi posto a confronto i due scenari con mezzi di riscaldamento domestico alternativi quali il boiler a gas, il pannello solare termico integrato con caldaia a gas e la pompa di calore elettrica. È emerso che tra i due scenari a biomassa quello a legna risulti decisamente più impattante verso le categorie salute umana e qualità dell’ecosistema , mentre per il pellet si è riscontrato un impatto maggiore del precedente nella categoria consumo di risorse. Dall’analisi di contributo è emerso che l’impatto percentuale maggiore per entrambi gli scenari sia legato allo smaltimento delle ceneri, pertanto si è ipotizzata una soluzione alternativa in cui esse vengano smaltite nell’inceneritore, riducendo così gli impatti. I risultati del punteggio singolo mostrano come lo scenario di riscaldamento a legna produca un quantitativo di particolato superiore rispetto al processo di riscaldamento a pellet, chiaramente dovuto alle caratteristiche chimico-fisiche dei combustibili ed alla efficienza di combustione. Dal confronto con gli scenari di riscaldamento alternativi è emerso che il sistema più impattante per le categorie salute umana e qualità dell’ecosistema rimane quello a legna, seguito dal pellet. I processi alternativi presentano impatti maggiori alla voce consumo di risorse. Per avvalorare i risultati ottenuti per i due metodi a biomassa è stata eseguita un’analisi di incertezza attraverso il metodo Monte Carlo, ad un livello di confidenza del 95%. In conclusione si può affermare che i sistemi di riscaldamento domestico che impiegano processi di combustione della biomassa legnosa sono certamente assai vantaggiosi, poiché pareggiano il quantitativo di CO2 emessa con quella assorbita durante il ciclo di vita, ma al tempo stesso possono causare maggiori danni alla salute umana e all’ecosistema rispetto a quelli tradizionali.

Un piano territoriale per la riduzione della concentrazione di CO2 nell'atmosfera e la produzione energetica da fonti rinnovabili per mezzo della filiera delle biomasse

Il progetto propone uno studio per verificare la fattibilita' di un piano territoriale (ideato per il bacino del Po ma di fatto estendibile a tutti i bacini fluviali) per la creazione di una filiera di colture bioenergetiche (biomasse) che, trasportate per mezzo della navigazione fluviale (uno dei mezzi di trasporto a minore emissione di CO2), alimentino una o piu' centrali a nuova tecnologia che associno alla produzione di calore (teleriscaldamento e raffreddamento) e di energia la separazione dei fumi. La CO2 catturata dalla crescita delle biomasse e recuperata dalla combustione, puo' quindi essere segregata nel sottosuolo di aree costiere subsidenti contrastando il fenomeno dell’abbassamento del suolo. Ricavando benefici in tutti i passaggi di attuazione del piano territoriale (lancio dell'agricoltura bioenergetica, rilancio della navigazione a corrente libera, avvio di una economia legata alla logistica del trasporto e dello stoccaggio delle biomasse, generazione di energia pulita, lotta alla subsidenza) il progetto, di fatto, consente di catturare ingenti quantitativi di CO2 dall'atmosfera e di segregarli nel sottosuolo, riducendo l'effetto serra. Nel corso del Dottorato e' stata sviluppata una metodologia di valutazione della sostenibilita' economica ed ambientale del progetto ad un bacino fluviale, che consta di una modulistica di raccolta dei dati di base e di una procedura informatizzata di analisi.

Coastal flood vulnerability assessment with geomatic methods: Test sites of western Thailand, Sydney (Australia) and aeolian islands (south tyrrhenian sea, Italy)

The work undertaken in this PhD thesis is aimed at the development and testing of an innovative methodology for the assessment of the vulnerability of coastal areas to marine catastrophic inundation (tsunami). Different approaches are used at different spatial scales and are applied to three different study areas: 1. The entire western coast of Thailand 2. Two selected coastal suburbs of Sydney – Australia 3. The Aeolian Islands, in the South Tyrrhenian Sea – Italy I have discussed each of these cases study in at least one scientific paper: one paper about the Thailand case study (Dall’Osso et al., in review-b), three papers about the Sydney applications (Dall’Osso et al., 2009a; Dall’Osso et al., 2009b; Dall’Osso and Dominey-Howes, in review) and one last paper about the work at the Aeolian Islands (Dall’Osso et al., in review-a). These publications represent the core of the present PhD thesis. The main topics dealt with are outlined and discussed in a general introduction while the overall conclusions are outlined in the last section.

Studio di ausili tecnologici compensativi di supporto all'iter di apprendimento matematico secondario e universitario degli studenti con dislessia

Data coming out from various researches carried out over the last years in Italy on the problem of school dispersion in secondary school show that difficulty in studying mathematics is one of the most frequent reasons of discomfort reported by students. Nevertheless, it is definitely unrealistic to think we can do without such knowledge in today society: mathematics is largely taught in secondary school and it is not confined within technical-scientific courses only. It is reasonable to say that, although students may choose academic courses that are, apparently, far away from mathematics, all students will have to come to terms, sooner or later in their life, with this subject. Among the reasons of discomfort given by the study of mathematics, some mention the very nature of this subject and in particular the complex symbolic language through which it is expressed. In fact, mathematics is a multimodal system composed by oral and written verbal texts, symbol expressions, such as formulae and equations, figures and graphs. For this, the study of mathematics represents a real challenge to those who suffer from dyslexia: this is a constitutional condition limiting people performances in relation to the activities of reading and writing and, in particular, to the study of mathematical contents. Here the difficulties in working with verbal and symbolic codes entail, in turn, difficulties in the comprehension of texts from which to deduce operations that, once combined together, would lead to the problem final solution. Information technologies may support this learning disorder effectively. However, these tools have some implementation limits, restricting their use in the study of scientific subjects. Vocal synthesis word processors are currently used to compensate difficulties in reading within the area of classical studies, but they are not used within the area of mathematics. This is because the vocal synthesis (or we should say the screen reader supporting it) is not able to interpret all that is not textual, such as symbols, images and graphs. The DISMATH software, which is the subject of this project, would allow dyslexic users to read technical-scientific documents with the help of a vocal synthesis, to understand the spatial structure of formulae and matrixes, to write documents with a technical-scientific content in a format that is compatible with main scientific editors. The system uses LaTex, a text mathematic language, as mediation system. It is set up as LaTex editor, whose graphic interface, in line with main commercial products, offers some additional specific functions with the capability to support the needs of users who are not able to manage verbal and symbolic codes on their own. LaTex is translated in real time into a standard symbolic language and it is read by vocal synthesis in natural language, in order to increase, through the bimodal representation, the ability to process information. The understanding of the mathematic formula through its reading is made possible by the deconstruction of the formula itself and its “tree” representation, so allowing to identify the logical elements composing it. Users, even without knowing LaTex language, are able to write whatever scientific document they need: in fact the symbolic elements are recalled by proper menus and automatically translated by the software managing the correct syntax. The final aim of the project, therefore, is to implement an editor enabling dyslexic people (but not only them) to manage mathematic formulae effectively, through the integration of different software tools, so allowing a better teacher/learner interaction too.

Sorveglianza dell'influenza aviare: studio di un sistema di rilevazione precoce della circolazione virale in popolazioni di volatili selvatici

The emergency of infection by highly pathogenic avian influenza virus (HPAI) subtype H5N1 has focused the attention of the world scientific community, requiring the prompt provision of effective control systems for early detection of the circulation of low pathogenic influenza H5 viruses (LPAI) in populations of wild birds to prevent outbreaks of highly pathogenic (HPAI) in populations of domestic birds with possible transmission to humans. The project stems from the aim to provide, through a preliminary analysis of data obtained from surveillance in Italy and Europe, a preliminary study about the virus detection rates and the development of mathematical models, an objective assessment of the effectiveness of avian influenza surveillance systems in wild bird populations, and to point out guidelines to support the planning process of the sampling activities. The results obtained from the statistical processing quantify the sampling effort in terms of time and sample size required, and simulating different epidemiological scenarios identify active surveillance as the most suitable for endemic LPAI infection monitoring in wild waterfowl, and passive surveillance as the only really effective tool in early detecting HPAI H5N1 circulation in wild populations. Given the lack of relevant information on H5N1 epidemiology, and the actual finantial and logistic constraints, an approach that makes use of statistical tools to evaluate and predict monitoring activities effectiveness proves to be of primary importance to direct decision-making and make the best use of available resources.

Velocity structure and seismic anisotropy in the crust and upper mantle from Receiver Function analysis: three case studies in Italy

The research for this PhD project consisted in the application of the RFs analysis technique to different data-sets of teleseismic events recorded at temporary and permanent stations located in three distinct study regions: Colli Albani area, Northern Apennines and Southern Apennines. We found some velocity models to interpret the structures in these regions, which possess very different geologic and tectonics characteristics and therefore offer interesting case study to face. In the Colli Albani some of the features evidenced in the RFs are shared by all the analyzed stations: the Moho is almost flat and is located at about 23 km depth, and the presence of a relatively shallow limestone layer is a stable feature; contrariwise there are features which vary from station to station, indicating local complexities. Three seismic stations, close to the central part of the former volcanic edifice, display relevant anisotropic signatures­­­ with symmetry axes consistent with the emplacement of the magmatic chamber. Two further anisotropic layers are present at greater depth, in the lower crust and the upper mantle, respectively, with symmetry axes directions related to the evolution of the volcano complex. In Northern Apennines we defined the isotropic structure of the area, finding the depth of the Tyrrhenian (almost 25 km and flat) and Adriatic (40 km and dipping underneath the Apennines crests) Mohos. We determined a zone in which the two Mohos overlap, and identified an anisotropic body in between, involved in the subduction and going down with the Adiratic Moho. We interpreted the downgoing anisotropic layer as generated by post-subduction delamination of the top-slab layer, probably made of metamorphosed crustal rocks caught in the subduction channel and buoyantly rising toward the surface. In the Southern Apennines, we found the Moho depth for 16 seismic stations, and highlighted the presence of an anisotropic layer underneath each station, at about 15-20 km below the whole study area. The moho displays a dome-like geometry, as it is shallow (29 km) in the central part of the study area, whereas it deepens peripherally (down to 45 km); the symmetry axes of anisotropic layer, interpreted as a layer separating the upper and the lower crust, show a moho-related pattern, indicated by the foliation of the layer which is parallel to the Moho trend. Moreover, due to the exceptional seismic event occurred on April 6th next to L’Aquila town, we determined the Vs model for two station located next to the epicenter. An extremely high velocity body is found underneath AQU station at 4-10 km depth, reaching Vs of about 4 km/s, while this body is lacking underneath FAGN station. We compared the presence of this body with other recent works and found an anti-correlation between the high Vs body, the max slip patches and earthquakes distribution. The nature of this body is speculative since such high velocities are consistent with deep crust or upper mantle, but can be interpreted as a as high strength barrier of which the high Vs is a typical connotation.

Sintesi di catalizzatori supportati Pd/Cu e studio della loro reattività per l'idrodeclorurazione di molecole clorofluorurate

Il Protocollo di Montreal, che succede alla Convenzione di Vienna per la protezione dello strato di ozono richiede l’eliminazione di idrocarburi contenenti cloro (CFC). Nel corso degli ultimi decenni ha quindi assunto importanza la reazione di idrodeclorurazione di clorofluorocarburi, in particolare rivolta alla produzione di idrocarburi fluorurati che sono risultati interessanti per la produzione di polimeri con specifiche caratteristiche di resistenza meccanica, termica e chimica. In questo lavoro di tesi, svolto in collaborazione con SOLVAY SPECIALTY POLYMERS ITALY, sono stati studiati catalizzatori innovativi per la produzione di perfluorometilviniletere (MVE), mediante idrodeclorurazione di perfluorometilcloroviniletere (AM). Attualmente la reazione di produzione industriale dell’MVE, condotta con l'utilizzo di quantità stechiometriche di Zn e dimetilformammide (DMF), presenta il notevole problema dello smaltimento di grandi quantità di zinco cloruro e di DMF. La reazione studiata, condotta in catalisi eterogenea, in presenta di H2, presenta una forte dipendenza dalla natura dei metalli utilizzati oltre che dal tipo di sintesi dei catalizzatori impiegati. Nell'ambito di questo lavoro è stato sviluppato un metodo, a basso impatto ambientale, per la sintesi si nanoparticelle preformate da utilizzare per la preparazione di catalizzatori supportati si TiO2 e SiO2. Le nanosospensioni ed i sistemi catalitici prodotti sono stati caratterizzati utilizzando diverse metodologie di analisi quali: XRD, XRF, TEM, TPR-MS, che hanno permesso di ottimizzare le diverse fasi della preparazione. Allo scopo di osservare effetti sinergici tra le specie utilizzate sono stati confrontati sistemi catalitici monometallici con sistemi bimetallici, rivelando interessanti implicazioni derivanti dall’utilizzo di fasi attive nanoparticellari a base di Pd e Cu. In particolare, è stato possibile apprezzare miglioramenti significativi nelle prestazioni catalitiche in termini di selettività a perfluorometilviniletere all’aumentare del contenuto di Cu. La via di sintesi ottimizzata e impiegata per la produzione di nanoparticelle bimetalliche è risultata una valida alternativa, a basso impatto ambientale, ai metodi di sintesi normalmente usati, portando alla preparazione di catalizzatori maggiormente attivi di quelli preparati con i metalli standard.

Da alleati vittoriosi ad acerrimi rivali: i processi di ri-allineamento dopo i conflitti egemonici. Teorie a confronto e studio di casi

Why some powers manage to coordinate their security efforts while others confront each other as rivals is still one of the most relevant and debated questions in the field of IR theory. The dissertation wants to give a contribution to this important debate. In particular, the main goal of the research is to analyse the dynamics of great power interactions after the end of hegemonic conflicts, that is to understand why, following the defeat of the common enemies, some of the winning allies continue to cooperate, while others begin to engage in political and military competition. In order to understand this difference, the study compares the explanatory value of two rival theoretical perspectives: neorealism, in its main version of the balance of power framework, and a liberal approach focused on domestic politics. The thesis is divided in two sections. In the first, I do summarize the main assumptions and predictions of the theories, from which I derive two different sets of hypotheses on the evolution of post-war great power relations. In the second part, I test the hypotheses by focusing on two cases of post-war alignment dynamics: 1) the relations among Austria, Prussia, Russia, Great Britain and France after the Napoleonic wars; 2) the relations among the US, the UK, France and Italy after the end of WWI. The historical cases disconfirm the logic of the balance of power and confirm the liberal hypotheses, seeing that the results of the analysis show changes in the domestic structures of the great powers had a much larger impact on the emergence of new alliances and rivalries than did the international distribution of power. In the conclusion of the dissertation, I provide the reader with a discussion of the main theoretical implications of the empirical findings.