Three essays on organizations and their external environment

Abstract: The literature on the various links between organizations and their external environment is very extensive and fragmented. This thesis is comprised of three separate essays, each examining specific research questions related to these links. The first essay deals with the notion of industry life cycle and how the geographical concentration of an industry is linked to the particular life cycle stage in which the industry finds itself. The aim of this first essay is firstly to verify if the evolution of the Swiss hotel industry fits some of the stylized facts of the industry life cycle. The second aim is to verify if there is evidence of geographical clustering of the hotel industry, and by extension of tourism. The third aim is to verify a hypothesis that industry decline manifests itself mainly by company closures in decentralized locations. The importance for organizational survival and performance of adapting and reacting to environmental changes has long been ascertained. This adaptation requires managers, under conditions of uncertainty, to identify relevant changes in their external environment and to interpret the possible effects of those changes on their organization. Furthermore, it requires finding and adopting organizational responses in reaction to the environmental changes. The second essay explores how managers perceive their environment by reporting the results of two workshops held with managers from the European hotel industry. In the third essay we examine in more detail the role of uncertainty in the interpretation by executives of environmental changes. We integrate existing theories of interpretation and uncertainty into one framework, which we then test using national survey data from the hotel industry. In all three essays we are able to provide some evidence to support our main hypotheses, but.also make suggestions far further research into the topics examined.

Activity measurements of 18F and 90Y with commercial radionuclide calibrators for nuclear medicine in Switzerland.

The activity of radiopharmaceuticals in nuclear medicine is measured before patient injection with radionuclide calibrators. In Switzerland, the general requirements for quality controls are defined in a federal ordinance and a directive of the Federal Office of Metrology (METAS) which require each instrument to be verified. A set of three gamma sources (Co-57, Cs-137 and Co-60) is used to verify the response of radionuclide calibrators in the gamma energy range of their use. A beta source, a mixture of (90)Sr and (90)Y in secular equilibrium, is used as well. Manufacturers are responsible for the calibration factors. The main goal of the study was to monitor the validity of the calibration factors by using two sources: a (90)Sr/(90)Y source and a (18)F source. The three types of commercial radionuclide calibrators tested do not have a calibration factor for the mixture but only for (90)Y. Activity measurements of a (90)Sr/(90)Y source with the (90)Y calibration factor are performed in order to correct for the extra-contribution of (90)Sr. The value of the correction factor was found to be 1.113 whereas Monte Carlo simulations of the radionuclide calibrators estimate the correction factor to be 1.117. Measurements with (18)F sources in a specific geometry are also performed. Since this radionuclide is widely used in Swiss hospitals equipped with PET and PET-CT, the metrology of the (18)F is very important. The (18)F response normalized to the (137)Cs response shows that the difference with a reference value does not exceed 3% for the three types of radionuclide calibrators.

The mechanisms of agglomeration: Evidence from the effect of inter-industry relations on the location of new firms

The objective of this paper is to explore the relative importance of each of Marshall's agglomeration mechanisms by examining the location of new manufacturing firms in Spain. In particular, we estimate the count of new firms by industry and location as a function of (pre-determined) local employment levels in industries that: 1) use similar workers (labor market pooling); 2) have a customer- supplier relationship (input sharing); and 3) use similar technologies (knowledge spillovers). We examine the variation in the creation of new firms across cities and across municipalities within large cities to shed light on the geographical scope of each of the three agglomeration mechanisms. We find evidence of all three agglomeration mechanisms, although their incidence differs depending on the geographical scale of the analysis.

The mechanisms of agglomeration: Evidence from the effect of inter-industry relations on the location of new firms

The objective of this paper is to explore the relative importance of each of Marshall's agglomeration mechanisms by examining the location of new manufacturing firms in Spain. In particular, we estimate the count of new firms by industry and location as a function of (pre-determined) local employment levels in industries that: 1) use similar workers (labor market pooling); 2) have a customer- supplier relationship (input sharing); and 3) use similar technologies (knowledge spillovers). We examine the variation in the creation of new firms across cities and across municipalities within large cities to shed light on the geographical scope of each of the three agglomeration mechanisms. We find evidence of all three agglomeration mechanisms, although their incidence differs depending on the geographical scale of the analysis.

Fossil resource depletion and climate change emissions: the role of physical constrictions

[spa] En lo que concierne al cambio climático, los pronósticos de cercanos picos de combustible fósiles parecen buenas noticias pues la mayoría de las emisiones proceden de la quema de combustibles fósiles. Sin embargo, esto podría resultar engañoso de confirmarse las enormes estimaciones de reservas de carbón pues puede divisarse un intercambio de combustible fósiles con baja concentración de carbono (petróleo y gas) por otros de mayor (carbón). Ciñéndonos a esta hipótesis desarrollamos escenarios donde tan pronto el petróleo y el gas natural alcanzan su cénit la extracción de carbón crece lo necesario para compensar el descenso de los primeros. Estimamos las emisiones que se deriva de tales supuestos y las comparamos con el peor escenario del IPCC. Si bien dicho escenario parece improbable concluimos que los picos de petróleo y gas no son suficientes para evitar peligrosas sendas de gases de efecto invernadero. Las concentraciones de CO2 halladas superan con creces las 450 ppm sin signos de remisión.

Copper, zinc and manganese in soils of two watersheds in Santa Catarina with intensive use of pig slurry

Systematic pig slurry application to crop soils may lead to the accumulation of heavy metals in regions with intensive pig raising. The aim of this study was to evaluate the accumulation of Cu, Zn and Mn in soils under systematic pig slurry application. For this purpose, soil samples were collected from two of the most representative watersheds of Santa Catarina where the predominant activity is pig raising. In each watershed, 12 properties were chosen to evaluate the different systems of pig husbandry (complete cycle (CC), farrowing (FaU) and finishing units (FiU)). Based on information of the producers, soil samples were collected in areas with and without systematic manure application. To determine the total Cu, Zn and Mn content in soils and manure, a methodology proposed by the Environmental Protection Agency of the United States (USEPA), method nº 3050B, was used. For the available heavy metal content, Cu and Zn was extracted with HCl 0.1 mol L-1 and Mn with KCl 1 mol L-1. Data were subjected to multivariate analysis, using the canonical discriminant analysis to identify the metals that best differentiate the soils studied within each swine housing system. Successive pig slurry applications cause an increase in Cu, Zn and Mn availability in the soil and this indicates the need for monitoring of the metal concentrations over time. The critical values of Cu in the soil can be reached and exceeded more rapidly than Zn. The results showed that the soil type may be one of the attribute underlying the determination of public policies in pig raising and waste management because soils such as Inceptisols were shown to be more prone to possible contamination since they may more rapidly reach total critical Cu levels.

Inter-relation between soybean yield and soil compaction under degraded pasture in Brazilian Savannah

The Cerrado (Brazilian Savannah) plays an important economic and financial role in the nation, since the pastures of this biome feed cattle for half of the domestic bovine meat productivity, and its agricultural fields produce a third of the country's grain. The variability and spatial dependence between the soil physical attributes and soybean yield were evaluated in a crop rotation planted on a degraded brachiaria pasture, on a dystroferric Red Latosol of an experimental farm of the State University of São Paulo (UNESP), in the 2005/2006 growing season. The linear and spatial correlations between these attributes were also studied, to determine conditions that would allow increased agricultural productivity. In the above pasture area, a grid was installed with 124 plots, spaced 10.0 x 10.0 m and 5.0 x 5.0 m apart, in a total area of 7,500 m². From the linear and spatial point of view, the high grain yield can be explained by the number of grains per plant and soil macroporosity. The high variability observed for most soil properties indicated that the crop - livestock integration system results in environmental heterogeneity of the soil.

Workshop on Nanotechnology for Cement and Concrete, September 5, 2007

This document summarizes the discussions and findings of a workshop held in Arlington, VA, on September 5, 2007. The objective of the meeting was to provide national direction on areas of priority interest and collaboration between industry and public agencies specifically for applications of nanotechnology to cement and concrete.

Fossil resource depletion and climate change emissions: the role of physical constrictions

[spa] En lo que concierne al cambio climático, los pronósticos de cercanos picos de combustible fósiles parecen buenas noticias pues la mayoría de las emisiones proceden de la quema de combustibles fósiles. Sin embargo, esto podría resultar engañoso de confirmarse las enormes estimaciones de reservas de carbón pues puede divisarse un intercambio de combustible fósiles con baja concentración de carbono (petróleo y gas) por otros de mayor (carbón). Ciñéndonos a esta hipótesis desarrollamos escenarios donde tan pronto el petróleo y el gas natural alcanzan su cénit la extracción de carbón crece lo necesario para compensar el descenso de los primeros. Estimamos las emisiones que se deriva de tales supuestos y las comparamos con el peor escenario del IPCC. Si bien dicho escenario parece improbable concluimos que los picos de petróleo y gas no son suficientes para evitar peligrosas sendas de gases de efecto invernadero. Las concentraciones de CO2 halladas superan con creces las 450 ppm sin signos de remisión.

Contributions of fat and protein to the incretin effect of a mixed meal.

Background: The relative contributions of fat and protein to the incretin effect are still largely unknown.Objective: This study assessed the incretin effects elicited by a mixed meal, and by its fat and protein components alone, with the use of a hyperglycemic clamp combined with oral nutrients.Design: Eight healthy volunteers were studied over 6 h after ingestion of a sandwich containing 1) dried meat, butter, and white bread; 2) dried meat alone; 3) butter alone; or 4) no meal (fasting control). Meals were ingested during a hyperglycemic clamp, and the incretin effect was calculated as the increment in plasma insulin after food intake relative to the concentrations observed during the control study.Results: A significant augmentation of postprandial insulin secretion, independent of plasma glycemia, occurred after ingestion of the mixed nutrients and the lipid component of the mixed meal (203 +/- 20.7% and 167.4 +/- 22.9% of control, respectively; both P < 0.05), whereas the protein component did not induce a significant incretin effect (129.0 +/- 7.9% of control; P = 0.6)Conclusions: Fat ingestion, in an amount typical of a standard meal, increases insulin secretion during physiologic hyperglycemia and thus contributes to the incretin effect. In contrast, ingestion of protein typical of normal meals does not contribute to the augmentation of postprandial insulin secretion. This trial was registered at clinicaltrials.gov as NCT00869453.

High pressure induced changes on sarcoplasmic protein fraction and quality indicators

The combined effect of pressure and mild temperature treatments on bovine sarcoplasmic proteins and quality parameters was assessed. M. longissimus dorsi samples were pressurised in a range of 200–600 MPa and 10–30 °C. High Pressure Processing (HPP) induced a reduction of protein solubility (p < 0.001) compared to non-treated controls (NT), more pronounced above 200 MPa. HPP at pressures higher than 200 MPa induced a strong modification (p < 0.001) of meat colour and a reduction of water holding capacity (WHC). SDS–PAGE analysis demonstrated that HPP significantly modified the composition of the sarcoplasmic protein fraction. The pressurisation temperature mainly affected protein solubility and colour; a smaller effect was observed on protein profiles. Significant correlations (p < 0.001) between sarcoplasmic protein solubility and both expressible moisture (r = −0.78) and colour parameters (r = −0.81 to −0.91) suggest that pressure induced denaturation of sarcoplasmic proteins could influence to some extent WHC and colour modifications of beef. Changes in protein band intensities were also significantly correlated with protein solubility, meat lightness and expressible moisture. These results describe the changes induced by HPP on sarcoplasmic proteins and confirm a relationship between modification of the sarcoplasmic protein fraction and alteration of meat quality characteristics

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Basil conservation affected by cropping season, harvest time and storage period

Fresh basil (Ocimum basilicum L.) is used in food, phytotherapic industry, and in traditional therapeutic, due to its essential oil content and composition. Nevertheless basil can not be kept for long periods after harvest and its quality can be reduced. This work aimed to assess the influence of the season and harvest time in the postharvest conservation of basil stored for different periods. Basil was harvested at 8 am and 4 pm both in August/1999 and January/2000. Cuttings were conditioned in PVC packages and stored for 3, 6, and 9 days. During storage, chlorophyll content, essential oil content and composition were determined as well as microbiological analyses were carried out. Harvest season and the days of storage influenced the final content of essential oil. There was a linear decrease in the content of essential oil, in the chlorophyll content and in the number of mold and yeast colonies during storage. There was no effect of cropping season or harvest hour on essential oil composition, but the eugenol and linalool content increased during storage. Coliforms were under 0.3 MPN g-1 and the number of Staphylococcus aureus was under 1.0x10² UFC g-1.

Anàlisi econòmica financera del sector de càrnies català

Objectiu: Aquest treball pretén reflectir la situació econòmica i financera de les empreses càrnies catalanes en el període 2007-2011, mitjançant l'anàlisi de dades dels seus estats comptables, per tal de diagnosticar la salut empresarial del sector de càrnies catalanes. L'estudi també realitza una anàlisi descriptiva de les entitats que engloben les càrnies catalanes i la posició que ocupen dintre de les indústries agroalimentàries espanyoles, identificant les diferents variables d'anàlisi a curt termini, a llarg termini i d'anàlisi econòmica; afegint a l'anàlisi convencional informacions patrimonials i de tresoreria procedents l'Estat de canvis en el patrimoni net i l'Estat de fluxos d'efectiu. Disseny/metodologia/enfocament: Fer una anàlisis financera a curt termini, a llarg termini, de resultats i dels dos estats nous: Estat de canvis en el patrimoni net i Estat de fluxos d'efectiu sobre una mostra de 130 empreses catalanes utilitzant l'estadística descriptiva oportuna. Resultats: La principal aportació ha estat el diagnòstic d' una bona salut empresarial d'aquestes empreses càrnies en el període analitzat tot i que a partir de l'any 2011 hi ha un canvi en els indicadors financers utilitzats. Limitacions: Seria convenient estendre la mostra i observar en els exercicis posteriors al 2011 si es verifica el canvi de tendència dels indicadors. Implicacions pràctiques: Permet valorar la projecció que ha fet aquest sector d'activitat a Catalunya en el període analitzat.Implicacions socials: Els resultats de l'estudi permet veure la projecció de futur que té aquest sector amb els canvis oportuns a fer. Originalitat/valor afegit: Per les associacions d'indústries càrnies permet fer una valoració de la salut empresarial de les principals empreses associades i per emprendre els reptes de futur oportuns.