Thermal modelling of semiconductor switches in three-level Neutral Point Clamped Medium Voltage DTC-inverter

The aim of this thesis is to investigate the thermal loading of medium voltage three-level NPC inverter’s semiconductor IGCT switches in different operation points. The objective is to reach both a fairly accurate off-line simulation program and also so simple a simulation model that its implementation into an embedded system could be reasonable in practice and a real time use should become feasible. Active loading limitation of the inverter can be realized with a thermal model which is practical in a real time use. Determining of the component heating has been divided into two parts; defining of component losses and establishing the structure of a thermal network. Basics of both parts are clarified. The simulation environment is Matlab-Simulink. Two different models are constructed – a more accurate one and a simplified one. Potential simplifications are clarified with the help of the first one. Simplifications are included in the latter model and the functionalities of both models are compared. When increasing the calculation time step a decreased number of considered components and time constants of the thermal network can be used in the simplified model. Heating of a switching component is dependent on its topological position and inverter’s operation point. The output frequency of the converter defines mainly which one of the switching components is – because of its losses and heating – the performance limiting component of the converter. Comparison of results given by different thermal models demonstrates that with larger time steps, describing of fast occurring switching losses becomes difficult. Generally articles and papers dealing with this subject are written for two-level inverters. Also inverters which apply direct torque control (DTC) are investigated rarely from the heating point of view. Hence, this thesis completes the former material.

Earnings Management Shareholders point of view

This paper studies the relationship of earnings management and investors. Analysis of incentives reveals that most of them are opportunistic in nature. Unfortunately the investor would need insider information to distinguish between different forms of earnings management. Investors in some countries seem to devalue earnings when government body has signaled that earnings management might be involved, unfortunately without a clear signal the behavior seems reverse among non-institutional investors.

Critical-point yield model to estimate yield damage caused by Cercospora zea-maydis in corn

A model to estimate damage caused by gray leaf spot of corn (Cercospora zea-maydis) was developed from experimental field data gathered during the summer seasons of 2000/01 and during the second crop season [January-seedtime] of 2001, in the southwest of Goiás state. Three corn hybrids were grown over two seasons and on two sites, resulting in 12 experimental plots. A disease intensity gradient (lesions per leaf) was generated through application, three times over the season, of five different doses of the fungicide propiconazol. From tasseling onward, disease intensity on the ear leaf (El), and El - 1, El - 2, El + 1, and El + 2, was evaluated weekly. A manual harvest at the physiological ripening stage was followed by grain drying and cleaning. Finally, grain yield in kg.ha-1 was estimated. Regression analysis, performed between grain yield and all combinations of the number of lesions on each leaf type, generated thirty linear equations representing the damage function. To estimate losses caused by different disease intensities at different corn growth stages, these models should first be validated. Damage coefficients may be used in determining the economic damage threshold.

Mobile system for pump working point estimation

In the current economy situation companies try to reduce their expenses. One of the solutions is to improve the energy efficiency of the processes. It is known that the energy consumption of pumping applications range from 20 up to 50% of the energy usage in the certain industrial plants operations. Some studies have shown that 30% to 50% of energy consumed by pump systems could be saved by changing the pump or the flow control method. The aim of this thesis is to create a mobile measurement system that can calculate a working point position of a pump drive. This information can be used to determine the efficiency of the pump drive operation and to develop a solution to bring pump’s efficiency to a maximum possible value. This can allow a great reduction in the pump drive’s life cycle cost. In the first part of the thesis, a brief introduction in the details of pump drive operation is given. Methods that can be used in the project are presented. Later, the review of available platforms for the project implementation is given. In the second part of the thesis, components of the project are presented. Detailed description for each created component is given. Finally, results of laboratory tests are presented. Acquired results are compared and analyzed. In addition, the operation of created system is analyzed and suggestions for the future development are given.

Energiantuotantolaitosprojektin teknisten tietojen hallinnan kehittäminen elinkaarinäkökulmasta

Tässä diplomityössä tarkastellaan HelenEngineeringin energiantuotantolaitosprojektien koneteknisten tietojen hallintaa. Työn tavoitteena oli muodostaa HelenEngineeringin energiantuotantolaitosprojektien koneteknisten tietojen hallinnankehittämisehdotuksia, joilla pyritään kehittämään koneteknisten tietojen hallintaa vastaamaan energiantuotantolaitoksen elinkaarinäkökulmasta asetettuja laatu- ja aikatauluvaatimuksia. Kehittämisehdotuksia on muodostettu koneteknisten tietojen laadunhallintaan ja käsittelyyn liittyen. Ne koskevat toimintatapoja, hallintajärjestelmiä ja niiden käyttöön tarvittavaa osaamista. Esitetyt kehittämisehdotukset perustuvat HelenEngineeringin projektien koneteknisten tietojen hallinnasta tunnistettuihin kehittämiskohtiin. Diplomityössä on muodostettu menetelmä näiden kehittämiskohtien tunnistamiseksi. Tämä menetelmä perustuu organisaation tietojen hallinnan suunnittelussa käytettävään timanttimalliin. Timanttimalli on esitelty tämän diplomityön teoriaosuudessa. Kehittämiskohtien tunnistamiseksi HelenEngineeringin energiantuotantolaitosprojektien koneteknisten tietojen hallintaprosessit on kuvattu. Lisäksi kehittämiskohtien tunnistamista varten on kerätty tarvittavia tietoja haastattelemalla asiantuntijoita.

Dialogue in the crisis of representation : realism and antirealism in the context of the conversation between theologians and quantum physicists in Göttingen 1949-1961

The aim of this study is to analyse the content of the interdisciplinary conversations in Göttingen between 1949 and 1961. The task is to compare models for describing reality presented by quantum physicists and theologians. Descriptions of reality indifferent disciplines are conditioned by the development of the concept of reality in philosophy, physics and theology. Our basic problem is stated in the question: How is it possible for the intramental image to match the external object?Cartesian knowledge presupposes clear and distinct ideas in the mind prior to observation resulting in a true correspondence between the observed object and the cogitative observing subject. The Kantian synthesis between rationalism and empiricism emphasises an extended character of representation. The human mind is not a passive receiver of external information, but is actively construing intramental representations of external reality in the epistemological process. Heidegger's aim was to reach a more primordial mode of understanding reality than what is possible in the Cartesian Subject-Object distinction. In Heidegger's philosophy, ontology as being-in-the-world is prior to knowledge concerning being. Ontology can be grasped only in the totality of being (Dasein), not only as an object of reflection and perception. According to Bohr, quantum mechanics introduces an irreducible loss in representation, which classically understood is a deficiency in knowledge. The conflicting aspects (particle and wave pictures) in our comprehension of physical reality, cannot be completely accommodated into an entire and coherent model of reality. What Bohr rejects is not realism, but the classical Einsteinian version of it. By the use of complementary descriptions, Bohr tries to save a fundamentally realistic position. The fundamental question in Barthian theology is the problem of God as an object of theological discourse. Dialectics is Barth¿s way to express knowledge of God avoiding a speculative theology and a human-centred religious self-consciousness. In Barthian theology, the human capacity for knowledge, independently of revelation, is insufficient to comprehend the being of God. Our knowledge of God is real knowledge in revelation and our words are made to correspond with the divine reality in an analogy of faith. The point of the Bultmannian demythologising programme was to claim the real existence of God beyond our faculties. We cannot simply define God as a human ideal of existence or a focus of values. The theological programme of Bultmann emphasised the notion that we can talk meaningfully of God only insofar as we have existential experience of his intervention. Common to all these twentieth century philosophical, physical and theological positions, is a form of anti-Cartesianism. Consequently, in regard to their epistemology, they can be labelled antirealist. This common insight also made it possible to find a common meeting point between the different disciplines. In this study, the different standpoints from all three areas and the conversations in Göttingen are analysed in the frameworkof realism/antirealism. One of the first tasks in the Göttingen conversations was to analyse the nature of the likeness between the complementary structures inquantum physics introduced by Niels Bohr and the dialectical forms in the Barthian doctrine of God. The reaction against epistemological Cartesianism, metaphysics of substance and deterministic description of reality was the common point of departure for theologians and physicists in the Göttingen discussions. In his complementarity, Bohr anticipated the crossing of traditional epistemic boundaries and the generalisation of epistemological strategies by introducing interpretative procedures across various disciplines.

Critical-point model to estimate yield loss caused by Asian soybean rust

ABSTRACTA model to estimate yield loss caused by Asian soybean rust (ASR) (Phakopsora pachyrhizi) was developed by collecting data from field experiments during the growing seasons 2009/10 and 2010/11, in Passo Fundo, RS. The disease intensity gradient, evaluated in the phenological stages R5.3, R5.4 and R5.5 based on leaflet incidence (LI) and number of uredinium and lesions/cm2, was generated by applying azoxystrobin 60 g a.i/ha + cyproconazole 24 g a.i/ha + 0.5% of the adjuvant Nimbus. The first application occurred when LI = 25% and the remaining ones at 10, 15, 20 and 25-day intervals. Harvest occurred at physiological maturity and was followed by grain drying and cleaning. Regression analysis between the grain yield and the disease intensity assessment criteria generated 56 linear equations of the yield loss function. The greatest loss was observed in the earliest growth stage, and yield loss coefficients ranged from 3.41 to 9.02 kg/ha for each 1% LI for leaflet incidence, from 13.34 to 127.4 kg/ha/1 lesion/cm2 for lesion density and from 5.53 to 110.0 kg/ha/1 uredinium/cm2 for uredinium density.

Accuracy and efficiency evaluation of point-centered quarter method variations for vegetation sampling in an araucaria forest

In order to verify Point-Centered Quarter Method (PCQM) accuracy and efficiency, using different numbers of individuals by per sampled area, in 28 quarter points in an Araucaria forest, southern Paraná, Brazil. Three variations of the PCQM were used for comparison associated to the number of sampled individual trees: standard PCQM (SD-PCQM), with four sampled individuals by point (one in each quarter), second measured (VAR1-PCQM), with eight sampled individuals by point (two in each quarter), and third measuring (VAR2-PCQM), with 16 sampled individuals by points (four in each quarter). Thirty-one species of trees were recorded by the SD-PCQM method, 48 by VAR1-PCQM and 60 by VAR2-PCQM. The level of exhaustiveness of the vegetation census and diversity index showed an increasing number of individuals considered by quadrant, indicating that VAR2-PCQM was the most accurate and efficient method when compared with VAR1-PCQM and SD-PCQM.

Toimintopohjainen ennustemalli palvelualan yritykselle

Kohdeorganisaatiossa on havaittu tarvetta kustannusten tarkemmalle ennustamiselle liiketoimintaympäristön ja palvelutarjooman muutosten seurauksena. Diplomityön päätavoitteena on selvittää, kuinka palvelualan yritykselle rakennetaan toimintopohjainen kustannusten ennustemalli. Päätavoitetta lähestytään selvittämällä mallin rakennusvaiheet, soveltuvuus kohdeorganisaatiolle ja siitä saatava lisäarvo. Tutkielmassa käytetään konstruktiivista tutkimusotetta. Malli pohjautuu toimintopohjaisen suunnittelun ja budjetoinnin suljetun silmukkamallin teoriaan. Empiriaosassa suoritetaan mallin rakentaminen vaiheittain. Työn tulokset osoittavat toimintopohjaisen suunnittelun ja budjetoinnin suljetun silmukkamallin soveltuvuuden kohdeorganisaation toimintojen mallinnukseen. Toimintopohjaisesta ennustemallista on saatavissa lisäarvoa budjetointiin ja skenaariotyöhön. Mallin avulla voidaan tarkastella budjetoinnin realistisuutta. Skenaariotyöstä voidaan saada tukea päätöksentekoon, koska erilaisten toimenpiteiden vaikutuksia voidaan arvioida resurssitarpeen ja kustannusten näkökulmasta.

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1811 (T4).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1826 (T31).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1826 (T30).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1829 (T37).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1821 (T23).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1822 (T24).