Produção, acúmulo e decomposição da serrapilhadeira e repartição da precipitação pluviométrica por espécies da caatinga

This study aimed to establish patterns of dynamics of litter and redistribution of rainfall of Caatinga vegetation. Sampling was done monthly for twenty three months in four areas: degraded, successional primary stage, secondary stage and late stage. We installed 72 collectors of 1.0 mx 1.0 m, with nylon fabric background in three areas. Litter deposited was fractionated into leaves, twigs, reproductive structures and miscellaneous, dried and weighed. To assess the stock of accumulated litter we used metal frame with dimensions of 0.5 mx 0.5 m, thrown randomly and collected monthly, taken to the laboratory for oven drying and weighed. To evaluate the decomposition, 40g of litter were placed in nylon bags (litterbags) mesh 1 mm ², dimensions 20.0 x 20.0 cm, being distributed on the soil surface and removed monthly, cleaned, dried and weighed. To evaluate the contribution of rainfall we used interceptometers installed 1.0 m above the ground surface, distributed under the canopy of six species of the caatinga, which evaluated the stemflow through collecting system installed around the stems of these species. The deposition of litter in the primary stage was 2.631,26 kg ha-1; 3.144,89 kg ha-1 in the secondary stage; 3.144,89 kg ha-1 in the late stage. The fraction of leaves was the largest contributor to the formation of litter in three stages. The degraded area showed greater accumulation of litter and decomposition has been sluggish during the dry period. We conclude that occurred greater litterfall in later stages. The late successional stage showed faster decomposition of litter, the evidence that is a better use of litter in nutrient cycling processes and incorporation of organic matter to the soil. The time required to decompose 50 % of the litter in the later stages of succession was lower indicating greater speed of release and reuse of nutrients by the vegetation. The specie jurema preta with less leaf area and consists of leaflets, showed greater internal precipitation in rain events of greater magnitude. The stemflow was not influenced by DAP and basal area. The water lost by trapping represented the largest proportion of total rainfall in all species studied

Biologia populacional de Emerita brasiliensis Schmitt (Crustacea, Hippidae) na Praia Vermelha do Norte, Ubatuba (São Paulo, Brasil)

Emerita brasiliensis Schmitt, 1935 is a common mole crab called tatuíra in Brazil, with distribution from Espírito-Santo State (Brazil) to Buenos Aires Province (Argentina). Specimens were collected bimonthly from May/1992 through March/1993 with 4mm siffers mesh, in the intertidal region at Vermelha do Norte Beach, Ubatuba, São Paulo, Brazil. The animals were sexed and measured with a precision caliper of 0.1 mm (Cl = carapace length). Males presented cl amplitude from 3.4-17.3mm (13.2±2.1mm), and females from 13.8-26.3mm (20.5±1.8mm), showing a well-defined sexual dimorfism for this variable. The population presented a smaller incidence of males in relation to females (0.54:1.00), however in May/1992 an inverse pattern occurred (1.84:1.00). Ovigerous females were present in all samples with exception of May and September/1992 with greater frequencies in July/1992 and January/1993. It is probable that female maturity occurs is reached with 17mm CL, the smallest size in wich ovigerous females were found.

Influência do relevo e erosão na variabilidade espacial de um Latossolo em Jaboticabal (SP)

Com o objetivo de avaliar as relações entre formas de paisagem e erosão em um Latossolo Vermelho eutroférrico (LVef) por meio de técnicas geoestatísticas na Fazenda Santa Isabel, município de Jaboticabal (SP), identificaram-se modelos de paisagem côncavo e linear. Coletaram-se amostras de solo em ambas as formas de paisagem em uma malha regular espaçada de 50 x 50 m em sete transeções na profundidade de 0,00-0,20 m, totalizando 412 pontos em 93 ha. Determinou-se a erodibilidade dos solos pelo método indireto, granulometria, bem como o carbono orgânico para cada ponto da malha, sendo esses valores usados na estimativa do potencial natural de erosão (pne). Os dados obtidos das propriedades de solo, erodibilidade e potencial natural de erosão foram analisados por meio de estatística descritiva e geoestatística com a modelagem de semivariogramas, sendo este utilizado para a confecção de mapas de krigagem. Segundo os resultados, as propriedades do solo e do pne apresentaram maior variabilidade espacial na pedoforma côncava, apesar de esta forma de paisagem apresentar menores perdas de solo por erosão e menor variabilidade espacial da erodibilidade. Deste modo, conclui-se que a erosão não adicionou variabilidade espacial para as propriedades do solo na mesma magnitude do relevo.

Forma da paisagem como critério para otimização amostral de latossolos sob cultivo de cana-de-açúcar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do conteúdo de água e da compactação do solo na produção de soja

A compactação do solo tem sido fator físico limitante ao crescimento das plantas. Este trabalho objetivou avaliar a produção de soja (Glycine max cv. Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 48) em razão do conteúdo de água e da compactação do solo. Usou-se o delineamento inteiramente casualizado, em esquema fatorial 4x2, ou seja, quatro níveis de resistência à penetração (entre 0,27 e 4,32 MPa) e dois níveis de retenção de água pelo solo (0,05 e 0,01 MPa). Foram utilizadas amostras de Latossolo Vermelho textura média (LVd) e Latossolo Vermelho textura argilosa (LVef), coletadas na profundidade de 020 cm, passadas em peneira de 0,4 cm e compactadas em camadas de 3 cm, em vasos de 20 cm de altura e 25 cm de diâmetro (9,82 L). Os níveis de resistência à penetração foram determinados com o penetrômetro de anel dinamométrico. O nível crítico de resistência do solo à penetração, em relação à produção de grãos, foi de 1,66 e 2,22 MPa, no LVd, e 3,05 e 2,81 MPa, no LVef, para o conteúdo de água retida na tensão de 0,05 e 0,01 MPa, respectivamente. A maior produção de grãos foi obtida na tensão de 0,01 MPa. A produção de grãos de soja é afetada em níveis críticos de resistência do solo à penetração superiores a 2 MPa em latossolos com conteúdo de água retida na tensão de 0,01 MPa.

Effectiveness of fused magnesium potassium phosphate for marandu grass

O alto custo atual do KCl e a grande dependência de sua importação para suprir a demanda nacional sugerem a necessidade de estudos que procurem avaliar a eficiência de outras fontes de K, principalmente aquelas baseadas em matéria-prima nacional. Nesse sentido, foi conduzido um experimento em casa de vegetação com amostras de um Latossolo Vermelho distrófico textura média, adotando-se o delineamento inteiramente casualizado em esquema fatorial 4 x 3 x 2, sendo quatro doses de K (0, 60, 120 e 180 mg kg-1 de K), três fontes [(cloreto de potássio (KCl)], termofosfato magnesiano potássico (FMPP) e a mistura de 70 % FMPP + 30 % KCl) e duas granulometrias (100 e 60 mesh), com três repetições. Verificou-se que a adubação potássica promoveu incrementos significativos na produção de matéria seca (parte aérea) e nos teores de K no solo e na planta, não havendo diferenças entre as fontes e suas granulometrias. Os níveis críticos de K no solo e na parte aérea das plantas foram de 1,53 mmol c dm-3 e 19,1 g kg-1, respectivamente.

Análise espacial de atributos físicos e carbono orgânico em argissolo vermelho-amarelo cultivado com cana-de-açúcar

A agricultura convencional utiliza o solo intensivamente, modificando os seus atributos. Neste estudo, objetivou-se avaliar a variabilidade espacial de alguns atributos físicos e carbono orgânico do solo em um Argissolo Vermelho-Amarelo cultivado com cana-de-açúcar, usando geoestatística. O trabalho foi realizado em Maracanaú - CE, em uma área de produção de cana-de-açúcar, manejado mediante preparo conservacionista sobre uma cobertura de palhada de cana-de-açúcar. As amostras de solo foram retiradas de uma profundidade de 0,00 - 0,20 m, em uma malha, com intervalo regular de 10 m, totalizando 100 pontos. em cada amostra, foi analisado densidade de partículas, densidade do solo, carbono orgânico, porosidade total, macroposidade e microposidade. O coeficiente de variação indicou variabilidade baixa para densidade de partículas, densidade do solo e porosidade total e média para as variáveis macroporosidade, microporosidade e carbono orgânico. As variáveis analisadas mostraram dependência espacial, a qual foi observada nos mapas de krigagem. A distribuição de poros por tamanho e a porosidade total indicam condições físicas razoavelmente boas, embora com valores de densidade do solo ligeiramente acima do nível considerado adequado para a classe textural do solo.

Uma Aplicação de Redes Neurais Auto-Organizaveis à Reconstrução Tridimensional de Superfícies

We propose a multi-resolution approach for surface reconstruction from clouds of unorganized points representing an object surface in 3D space. The proposed method uses a set of mesh operators and simple rules for selective mesh refinement, with a strategy based on Kohonen s self-organizing map. Basically, a self-adaptive scheme is used for iteratively moving vertices of an initial simple mesh in the direction of the set of points, ideally the object boundary. Successive refinement and motion of vertices are applied leading to a more detailed surface, in a multi-resolution, iterative scheme. Reconstruction was experimented with several point sets, induding different shapes and sizes. Results show generated meshes very dose to object final shapes. We include measures of performance and discuss robustness.

Análise de desempenho de sistemas de comunicação sem-fio para monitoramento de unidade de produção de poços petrolíferos terrestres

The greater part of monitoring onshore Oil and Gas environment currently are based on wireless solutions. However, these solutions have a technological configuration that are out-of-date, mainly because analog radios and inefficient communication topologies are used. On the other hand, solutions based in digital radios can provide more efficient solutions related to energy consumption, security and fault tolerance. Thus, this paper evaluated if the Wireless Sensor Network, communication technology based on digital radios, are adequate to monitoring Oil and Gas onshore wells. Percent of packets transmitted with successful, energy consumption, communication delay and routing techniques applied to a mesh topology will be used as metrics to validate the proposal in the different routing techniques through network simulation tool NS-2

Uma metodologia para modelagem e avaliação da dependabilidade de redes industriais sem fio

Ensuring the dependability requirements is essential for the industrial applications since faults may cause failures whose consequences result in economic losses, environmental damage or hurting people. Therefore, faced from the relevance of topic, this thesis proposes a methodology for the dependability evaluation of industrial wireless networks (WirelessHART, ISA100.11a, WIA-PA) on early design phase. However, the proposal can be easily adapted to maintenance and expansion stages of network. The proposal uses graph theory and fault tree formalism to create automatically an analytical model from a given wireless industrial network topology, where the dependability can be evaluated. The evaluation metrics supported are the reliability, availability, MTTF (mean time to failure), importance measures of devices, redundancy aspects and common cause failures. It must be emphasized that the proposal is independent of any tool to evaluate quantitatively the target metrics. However, due to validation issues it was used a tool widely accepted on academy for this purpose (SHARPE). In addition, an algorithm to generate the minimal cut sets, originally applied on graph theory, was adapted to fault tree formalism to guarantee the scalability of methodology in wireless industrial network environments (< 100 devices). Finally, the proposed methodology was validate from typical scenarios found in industrial environments, as star, line, cluster and mesh topologies. It was also evaluated scenarios with common cause failures and best practices to guide the design of an industrial wireless network. For guarantee scalability requirements, it was analyzed the performance of methodology in different scenarios where the results shown the applicability of proposal for networks typically found in industrial environments

Degradação de silagens de capim-elefante contendo subproduto do urucum

To evaluate the dry matter, neutral detergent fiber and crude protein in situ degradation of elephant grass silages with five levels (0; 4; 8; 12 and 16%, on a fresh matter basis) of annatto grain by-product (AGBP), this work was carried out. A split-plot design, consisting on the addition levels the plots and the incubation times the sub-plots, with four replicates, was adopted. For the silages making, the elephant grass was cut 70 days-old and mixed to the by-product, in 20 plastic drums. The samples were dried, grid in a bolter of 5 mm mesh, being used 3 g of samples in each nylon bag, for incubation in the rumem for 0; 6; 48 e 96 hours; 2 ram without defined breed were used. Was observed increased the disappearance of the DM until the level 13.37% of addition of (AGBP) the elephant grass silages for the incubation time 48 hours, this level was that presented the most disappearance DM. For the NDF the disappearance increased until 16% of addition. For the whole of parameters of degradation, was observed that the level of addition of 16% of (AGBP) presented the most values for the potential and effective degradability of variables in question. The inclusion of the annatto grain by-product for elephant grass silage results in greater potential and effective degradability.

Revisitando o problema de visibilidade para visualização tridimensional

We revisit the problem of visibility, which is to determine a set of primitives potentially visible in a set of geometry data represented by a data structure, such as a mesh of polygons or triangles, we propose a solution for speeding up the three-dimensional visualization processing in applications. We introduce a lean structure , in the sense of data abstraction and reduction, which can be used for online and interactive applications. The visibility problem is especially important in 3D visualization of scenes represented by large volumes of data, when it is not worthwhile keeping all polygons of the scene in memory. This implies a greater time spent in the rendering, or is even impossible to keep them all in huge volumes of data. In these cases, given a position and a direction of view, the main objective is to determine and load a minimum ammount of primitives (polygons) in the scene, to accelerate the rendering step. For this purpose, our algorithm performs cutting primitives (culling) using a hybrid paradigm based on three known techniques. The scene is divided into a cell grid, for each cell we associate the primitives that belong to them, and finally determined the set of primitives potentially visible. The novelty is the use of triangulation Ja 1 to create the subdivision grid. We chose this structure because of its relevant characteristics of adaptivity and algebrism (ease of calculations). The results show a substantial improvement over traditional methods when applied separately. The method introduced in this work can be used in devices with low or no dedicated processing power CPU, and also can be used to view data via the Internet, such as virtual museums applications

Lixiviação de potássio na avaliação da qualidade fisiológica de sementes de amendoim

O presente trabalho teve como objetivo investigar a possibilidade de se obter indicações sobre a qualidade fisiológica de sementes de amendoim através do teste de lixiviação de potássio, cuja eficiência foi avaliada comparativamente às informações fornecidas por outros testes de vigor e à emergência de plântulas em campo. Para tanto, utilizou-se dois lotes de sementes de amendoim da cultivar Tatu (peneira 20/64) que foram submetidos aos testes de germinação, primeira contagem de germinação, envelhecimento acelerado, condutividade elétrica (3 e 24 horas), emergência de plântulas em campo, índice de velocidade de emergência de plântulas, peso de matéria seca de plântulas e determinação do grau de umidade. Além destes, foram conduzidos estudos de lixiviação de potássio, cálcio e magnésio utilizando-se amostras de sementes fisicamente puras. A quantificação de potássio foi conduzida em fotômetro de chama e as de cálcio e magnésio em espectrofotometro de absorção atômica após 3, 6, 9, 12, 15, 18, 21, 24, 27 e 30 horas de embebição a 20ºC. As avaliações da lixiviação de potássio mostraram-se promissoras para a identificação de lotes com diferentes níveis de qualidade.

Aproveitamento de resíduo de caulim em cerâmica branca

The world market of Kaolin has been growing as new investments for better quality of materials have been applied. This market produces amounts of dross that are put in the environment in a wrong way, causing damages to it. Trying to reduce these damages, researches have been done in an attempt to use kaolin dross in ceramic. The disposal of kaolin dross in the environment by the industries of the states of Rio Grande do Norte and Paraiba have great impact in society. Usually this dross is disposed clandestinely in places like roads, river banks and lands of small cities. The present work shows the characteristics of the kaolin produced by the mining company in Junco do Seridó, Paraiba state, western Seridó, 300 km from Natal, in the border of both states. After that, researches were done to study its physical and the chemistry characteristics, trying to see if it can be used in white ceramic. The samples got were bolted in fabric of 325# . The technological characteristics tried to use it as a product in white ceramic. For that, it was made a haracterization of the subject matter through enlargement analyses, ATG and ATD, elaborating three formulations that were burned in four different temperatures, 1175, 1200, 1250 and 1300 degrees centigrade up to 30 minutes. After the burning, the subjects were submitted to water absorbing tests, linear retreating, apparent porosity, apparent specific mass, resistance to flexibility and MEV. For one of the mixtures it was obtained demanded properties for a semi porous material

Otimização de forma aplicando B-splines sob critério integral de tensões

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient