Minutes of meeting regarding purchase of property in Beaver Street

Digital image

Report on statement made to mayor regarding congregation's property and revenue

Digital image

Mechanical properties of nanodiamond-reinforced polymer-matrix composites

Poly(vinyl alcohol)-matrix reinforced with nanodiamond (ND) particles, with ND content up to 0.6 wt%, were synthesized. Characterization of the composites by transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS) reveal uniform distribution of the ND particles with no agglomeration in the matrix. Differential scanning calorimetry reveals that the crystallinity of the polymer increases with increasing ND content, indicating a strong interaction between ND and PVA. Nano-indentation technique was employed to assess the mechanical properties of composites. Results show that even small additions of ND lead to significant enhancement in the hardness and elastic modulus of PVA. Possible micromechanisms responsible for the enhancement of the mechanical properties are discussed.

A Novel Opto Electro Mechanical Interrogation System for Measuring Wavelength Shifts in Fiber Bragg Grating (FBG) Sensors

Here, we describe a novel FBG interrogation system in which FBGs are used as both sensing and reference elements. The reference FBGs is bonded to a mechanical flexure system having a linear amplification of 1:3.5, which is actuated using a piezo-actuator by applying a 0-150V ramp. The lengths of the reference gratings decide the maximum strain that can be applied to the reference grating, which in turn decides that strain range which can be interrogated. The main advantages of the present system are the on-line measurement of the wavelength shifts, small size, good sensitivity, multiplexing capability and low cost.

Microstructure and mechanical properties of unidirectionally solidified Al-Si-Ni ternary eutectic

Al-10.98 pct Si-4.9 pct Ni ternary eutectic alloy was unidirectionally solidified at growth rates from 1.39μm/sec to 6.95μm/sec. Binary Al-Ni and Al-Si eutectics prepared from the same purity metals were also solidified under similar conditions to characterize the growth conditions under the conditions of present study. NiAl3 phase appeared as fibers in the binary Al-Ni eutectic and silicon appeared as irregular plates in the binary Al-Si eutectic. However, in the ternary Al-Si-Ni eutectic alloy both NiAl3 and silicon phases appeared as irregular plates dispersed in α-Al phase, without any regular repctitive arrangement. The size and spacing of NiAl3 and Si platelets in cone shaped colonies decreased with an increase in the growth rate of the ternary eutectic. Examination of specimen quenched during unidirectional solidification indicated that the ternary eutectic grows with a non-planar interface with both Si and NiAl3 phases protruding into the liquid. It is concluded that it will be difficult to grow regular ternary eutectic structures even if only one phase has a high entropy of melting. The tensile strength and modulus of unidirectionally solidified Al-Si-Ni eutectic was lower than the chill cast alloys of the same composition, and decreased with a decrease in growth rate. Tensile modulus and strength of ternary Al-Si-Ni eutectic alloys was greater than binary Al-Si eutectic alloy under similar growth conditions, both in the chill cast and in unidirectionally solidified conditions.

Essays on the Economics of Intellectual Property Rights

Väitöskirjassani tarkastelen informaatiohyödykkeiden ja tekijänoikeuksien taloustiedettä kahdesta eri perspektiivistä. Niistä ensimmäinen kuuluu endogeenisen kasvuteorian alaan. Väitöskirjassani yleistän ”pool of knowledge” -tyyppisen endogeenisen kasvumallin tilanteeseen, jossa patentoitavissa olevalla innovaatiolla on minimikoko, ja jossa uudenlaisen tuotteen patentoinut yritys voi menettää monopolinsa tuotteeseen jäljittelyn johdosta. Mallin kontekstissa voidaan analysoida jäljittelyn ja innovaatioilta vaaditun ”minimikoon” vaikutuksia hyvinvointiin ja talouskasvuun. Kasvun maksimoiva imitaation määrä on mallissa aina nolla, mutta hyvinvoinnin maksimoiva imitaation määrä voi olla positiivinen. Talouskasvun ja hyvinvoinnin maksimoivalla patentoitavissa olevan innovaation ”minimikoolla” voi olla mikä tahansa teoreettista maksimia pienempi arvo. Väitöskirjani kahdessa jälkimmäisessä pääluvussa tarkastelen informaatiohyödykkeiden kaupallista piratismia mikrotaloustieteellisen mallin avulla. Informaatiohyödykkeistä laittomasti tehtyjen kopioiden tuotantokustannukset ovat pienet, ja miltei olemattomat silloin kun niitä levitetään esimerkiksi Internetissä. Koska piraattikopioilla on monta eri tuottajaa, niiden hinnan voitaisiin mikrotaloustieteen teorian perusteella olettaa laskevan melkein nollaan, ja jos näin kävisi, kaupallinen piratismi olisi mahdotonta. Mallissani selitän kaupallisen piratismin olemassaolon olettamalla, että piratismista saatavan rangaistuksen uhka riippuu siitä, kuinka monille kuluttajille piraatti tarjoaa laittomia hyödykkeitä, ja että se siksi vaikuttaa piraattikopioiden markkinoihin mainonnan kustannuksen tavoin. Kaupallisten piraattien kiinteiden kustannusten lisääminen on mallissani aina tekijänoikeuksien haltijan etujen mukaista, mutta ”mainonnan kustannuksen” lisääminen ei välttämättä ole, vaan se saattaa myös alentaa laillisten kopioiden myynnistä saatavia voittoja. Tämä tulos poikkeaa vastaavista aiemmista tuloksista sikäli, että se pätee vaikka tarkasteltuihin informaatiohyödykkeisiin ei liittyisi verkkovaikutuksia. Aiemmin ei-kaupallisen piratismin malleista on usein johdettu tulos, jonka mukaan informaatiohyödykkeen laittomat kopiot voivat kasvattaa laillisten kopioiden myynnistä saatavia voittoja jos laillisten kopioiden arvo niiden käyttäjille riippuu siitä, kuinka monet muut kuluttajat käyttävät samanlaista hyödykettä ja jos piraattikopioiden saatavuus lisää riittävästi laillisten kopioiden arvoa. Väitöskirjan viimeisessä pääluvussa yleistän mallini verkkotoimialoille, ja tutkin yleistämäni mallin avulla sitä, missä tapauksissa vastaava tulos pätee myös kaupalliseen piratismiin.

Studies on the Effects of Property Taxation, Rent Control and Housing Allowances

Tämä väitöskirja koostuu asuntomarkkinoiden taloustieteellistä analyysia esittelevästä johdantoluvusta ja kolmesta tutkimuksesta, joissa analysoidaan asuntomarkkinoihin vaikuttavia politiikkatoimenpiteitä. Luvussa 2 tutkitaan Suomen kiinteistöverojärjestelmän vaikutusta asuntorakentamiseen. Vuonna 2001 tehtiin uudistus, jonka myötä kunnat voivat verottaa rakentamatonta asuintonttia korkeammalla veroasteella kuin rakennettua tonttia. Maanomistajan rakentamispäätöksen teoreettisen mallin mukaan rakentamattoman tontin korotettu kiinteistöveron pitäisi nopeuttaa rakentamista, mutta toisaalta myös rakentamiseen investoitu rahamäärä saattaa muuttua. Asuintonttien kiinteistöverojen yleinen taso ei vaikuta maanomistajan käyttäytymiseen, sillä tontin verotusarvo ei riipu rakentamispäätöksestä. Vain rakentamattoman ja rakennetun tontin veroasteiden erolla on merkitystä. Empiiriset tulokset ovat sopusoinnussa teorian kanssa. Tulosten mukaan prosenttiyksikön nousu rakentamattoman ja rakennetun tontin veroasteiden erossa lisää omakotialoitusten määrää viidellä prosentilla lyhyellä aikavälillä. Luvussa 3 analysoidaan vuokrasääntelystä vuokralaisille aiheutuvia hyötyjä ja haittoja. Vuokrasäännellyissä asunnoissa asuvat kotitaloudet hyötyvät vuokrasääntelystä alhaisen vuokran muodossa. Heille saattaa kuitenkin koitua myös haittaa siitä, että toiveita vastaavan asunnon löytäminen on vuokrasääntelytilanteessa vaikeaa, koska vapaille asunnoille on suuri määrä ottajia. Vapaarahoitteisen vuokra-asuntokannan vuokrien sääntely purettiin Suomessa asteittain vuosina 1992–1995. Tutkimuksen empiiriset tulokset viittaavat siihen, että vuokrasääntelyn aiheuttamista suurista eroista halutun ja todellisen asuntokulutuksen välillä koituvat hyvinvointitappiot kumosivat merkittävän osan matalien vuokrien hyödyistä vuokralaisille. Luvussa 4 tutkitaan Suomen asumistukijärjestelmän kannustinvaikutuksia. Asumistuen määrää rajoittavat asunnon pinta-alalle ja neliövuokralle asetetut ylärajat. Neliövuokrarajoite voidaan tulkita asumisen laatua rajoittavana tekijänä. Tutkimuksen teoreettisessa osassa osoitetaan, että asumistukijärjestelmä luo vahvat kannustimet muuttaa asuntoihin, joissa pinta-ala- ja laaturajoitteet purevat. Empiiristen tulosten mukaan asumistukeen oikeutetut kotitaloudet eivät näytä reagoivan kannusteisiin. Tukeen oikeutettujen kotitalouksien asumisvalinnat suhteessa pinta-ala ja laaturajoitteisiin vastaavat muiden kotitalouksien valintoja ja asunnonvaihdon mahdollistama potentiaalinen asumistuen lisäys ei nosta muuttotodennäköisyyttä. Muuttamiseen liittyvät kustannukset ja vajavaiset tiedot tukijärjestelmästä saattavat selittää heikkoa reagointia asumistuen luomiin kannustimiin. Toinen mahdollinen selitys on asumistuen vajaakäyttö. Tutkimuksen mukaan vain 70–80 prosenttia asumistukeen oikeutetuista kotitalouksista nostaa tukea. Asumistuen hyödyntämisen todennäköisyys riippuu koulutustasosta, tuen määrästä ja tulo-odotuksista.

Statutory licences and third party dealings: Property analysis v statutory interpretation

Statutory licensing schemes are proliferating as a means of regulating commercial activity, resource exploitation and activities harmful to the environment. Statutes often declare that entitlements are non-transferable or are transferable only with approval or subject to conditions. Some entitlements, such as resource consents issued under the Resource Management Act 1991 (NZ), are declared not to be property. Despite these statutory declarations, entitlements are often held to be transferable in equity or to be property for the purposes of resolving private disputes. Recently, in Greenshell New Zealand Ltd v Tikapa Moana Enterprises Ltd, the High Court of New Zealand indicated that a resource consent was property that could support a claim for relief against forfeiture, continuing the trend in earlier cases that appear to depart from the statute. In this article we examine the juridical treatment of entitlements in private law. We identify factors influencing the courts’ enforcement of private arrangements which may circumvent the statutory intent. Our analysis will guide legislators in the design of provisions to implement new schemes.

Effect of creep deformations in mechanical systems under combined deterministic and random inputs

The effect of creep on the vibrations of a single degree of freedom system subjected to combined random and deterministic excitation has been studied in this paper. The deterministic part of the excitation is assumed to be a sinusoidal function while the random part of the excitation is considered as a narrow band process with a central frequency equal to the frequency of sinusoidal part of the excitation. Creep, an energy absorbing process, introduces an equivalent damping into the system. A measure of this damping and the statistical properties of the response of the mechanical system have been derived.

Impact of wildfires and floods on property values: A before and after analysis

One of the most evident casualties of a natural disaster is the property market. The private and social costs from such events run into millions of dollars. In this paper, we use a unique dataset to examine the impact on residential house prices affected by natural disasters using a hedonic property (HP) values approach. For this purpose, we use data before and after a wildfire and floods from Rockhampton in central Queensland, Australia. The data is unique because one suburb was affected by wildfires and another was affected by floods. For the analysis, three suburbs namely Frenchville, Park Avenue and Norman Gardens are used. Frenchville was significantly affected by wildfires in the latter part of 2009 and to a lesser extent in 2012, while Park Avenue was affected by floods at the end of 2010, January 2011–2013. Norman Gardens, which was relatively unaffected, is used as a control site. This enables us to examine the before and after effects on property values in the three suburbs. The results confirm that soon after a natural disaster property prices in affected areas decrease even though the large majority of individual houses remain unaffected. Furthermore, the results indicate that the largely unaffected suburb may gain immediately after a natural disaster but this gain may disappear if natural disasters continue to occur in the area/region due to the stigma created. The results have several important policy decision and welfare implications which are briefly discussed in the paper.

Effect of mechanical cycling on the stress-strain response of a martensitic Nitinol shape memory alloy

An experimental investigation into the ambient temperature, load-controlled tension�tension fatigue behavior of a martensitic Nitinol shape memory alloy (SMA) was conducted. Fatigue life for several stress levels spanning the critical stress for detwinning was determined and compared with that obtained on an alloy similar in composition but in the austenitic state at room temperature. Results show that the fatigue life of the pseudo-plastic alloy is superior to superelastic shape memory alloy. The stress�strain hysteretic response, monitored throughout the fatigue loading, reveals progressive strain accumulation with the cyclic loading. In addition, the area of hysteresis and recoverable and frictional energies were found to decrease with increasing number of fatigue cycles. Post-mortem characterization of the fatigued specimens through calorimetry and fractography was conducted in order to get further insight into the fatigue micromechanisms. These results are discussed in terms of reversible and irreversible microstructural changes that take place during cyclic loading. Aspects associated with self-heating of martensitic alloy undergoing high frequency stress cycling are discussed.

Acetylation of Transition Protein 2 (TP2) by KAT3B (p300) Alters Its DNA Condensation Property and Interaction with Putative Histone Chaperone NPM3

The hallmark of mammalian spermiogenesis is the dramatic chromatin remodeling process wherein the nucleosomal histones are replaced by the transition proteins TP1, TP2, and TP4. Subsequently these transition proteins are replaced by the protamines P1 and P2. Hyperacetylation of histone H4 is linked to their replacement by transition proteins. Here we report that TP2 is acetylated in vivo as detected by anti-acetylated lysine antibody and mass spectrometric analysis. Further, recombinant TP2 is acetylated in vitro by acetyltransferase KAT3B (p300) more efficiently than by KAT2B (PCAF). In vivo p300 was demonstrated to acetylate TP2. p300 acetylates TP2 in its C-terminal domain, which is highly basic in nature and possesses chromatin-condensing properties. Mass spectrometric analysis showed that p300 acetylates four lysine residues in the C-terminal domain of TP2. Acetylation of TP2 by p300 leads to significant reduction in its DNA condensation property as studied by circular dichroism and atomic force microscopy analysis. TP2 also interacts with a putative histone chaperone, NPM3, wherein expression is elevated in haploid spermatids.Interestingly, acetylation of TP2 impedes its interaction with NPM3. Thus, acetylation of TP2 adds a new dimension to its role in the dynamic reorganization of chromatin during mammalian spermiogenesis.

Thermo-mechanical characterization of surface-micromachined microheaters using in-line digital holography

This paper describes the application of lensless in-line digital holographic microscopy (DHM) to carry out thermo-mechanical characterization of microheaters fabricated through PolyMUMPs three-layer polysilicon surface micromachining process and subjected to a high thermal load. The mechanical deformation of the microheaters on the electrothermal excitation due to thermal stress is analyzed. The numerically reconstructed holographic images of the microheaters clearly indicate the regions under high stress. A double-exposure method has been used to obtain the quantitative measurements of the deformations, from the phase analysis of the hologram fringes. The measured deformations correlate well with the theoretical values predicted by a thermo-mechanical analytical model. The results show that lensless in-line DHM with Fourier analysis is an effective method for evaluating the thermo-mechanical characteristics of MEMS components.

Constitutive model for municipal solid waste incorporating mechanical creep and biodegradation-induced compression

A constitutive model is proposed to describe the stress-strain behavior of municipal solid waste (MSW) under loading using the critical state soil mechanics framework. The modified cam clay model is extended to incorporate the effects of mechanical creep and time dependent biodegradation to calculate total compression under loading. Model parameters are evaluated based on one-dimensional compression and triaxial consolidated undrained test series conducted on three types of MSW: (a) fresh MSW obtained from working phase of a landfill, (b) landfilled waste retrieved from a landfill after 1.5 years of degradation, and (c) synthetic MSW with controlled composition. The model captures the stress-strain and pore water pressure response of these three types of MSW adequately. The model is useful for assessing the deformation and stability of landfills and any post-closure development structures located on landfills.