Digging Deeper than Platinum: South Africa's Participation in an Emergent Fuel Cell Industry

South’s Africa’s position as global platinum supplier provides a unique opportunity for an emergent fuel cell industry. The innovative technology’s reliance on platinum has sparked interest in the mining sector, promoting the clean energy-producing devices in their own operations. This research focuses upon contemporary structures of racial oppression within the industry, to analyse how these dynamics influence the development and implementation of innovative technology. It also challenges the sustainability discourse associated with fuel cell technology in South Africa. The study follows a qualitative research approach, incorporating a political ecology focus to highlight the politicized nature of these interactions. The methodology incorporates a literature review, key informant interviews, fieldwork observations and document analysis. Findings indicate that the implementation of fuel cell technology in South Africa’s platinum mines will disproportionately burden historically disadvantaged South Africans, with the lack in technical knowledge-base considered a major challenge. Additionally, it was found that sustainability claims surrounding fuel cell technology are largely based on environmental characteristics. This has resulted in an oversimplification and a depoliticised account of the impacts of the technology. This study looked critically at the convergence of history and innovation, placing emphasis on context, power relations and knowledge to provide a more holistic account of the research problem. Opportunities exist for making a meaningful and viable contribution towards development and sustainability by means of investing in a South African fuel cell industry. The challenge will be in deliberately seeking pathways which address the more complex components of sustainability, benefitting all stakeholders and paying particular attention to the historical, political and social contexts from which the technology emerges. It is this particular context which allows for a questioning and perhaps even a re-evaluation of the sustainability narratives broadly applied to fuel cell technology.

Improving innovation and performance of Social Enterprises: Knowing what they know

Social Enterprises (SEs) are normally micro and small businesses that trade to tackle social problems, and to improve communities, people’s life chances, and the environment. Thus, their importance to society and economies is increasing. However, there is still a need for more understanding of how these organisations operate, perform, innovate and scale-up. This knowledge is crucial to design and provide accurate strategies to enhance the sector and increase its impact and coverage. Obtaining this understanding is the main driver of this paper, which follows the theoretical lens of the Knowledge-based View (KBV) theory to develop and assess empirically a novel model for knowledge management capabilities (KMCs) development that improves performance of SEs. The empirical assessment consisted of a quantitative study with 432 owners and senior members of SEs in UK, underpinned by 21 interviews. The findings demonstrate how particular organisational characteristics of SEs, the external conditions in which they operate, and informal knowledge management activities, have created overall improvements in their performance of up to 20%, based on a year-to-year comparison, including innovation and creation of social and environmental value. These findings elucidate new perspectives that can contribute not only to SEs and SE supporters, but also to other firms.

The elderly care and domestic services sector during the recent economic crisis. The case of Italy, Spain and France.

Over the past ten years in Italy, Spain and France, the demographic pressure and the increasing women’s participation in labour market have fuelled the expansion of the private provision of domestic and care services. In order to ensure the difficult balance between affordability, quality and job creation, each countries’ response has been different. France has developed policies to sustain the demand side introducing instruments such as vouchers and fiscal schemes, since the mid of the 2000s. Massive public funding has contributed to foster a regular market of domestic and care services and France is often presented as a “best practices” of those policies aimed at encouraging a regular private sector. Conversely in Italy and Spain, the development of a private domestic and care market has been mostly uncontrolled and without a coherent institutional design: the osmosis between a large informal market and the regular private care sector has been ensured on the supply side by migrant workers’ regularizations or the introduction of new employment regulations . The analysis presented in this paper aims to describe the response of these different policies to the challenges imposed by the current economic crisis. In dealing with the retrenchment of public expenditure and the reduced households’ purchasing power, Italy, Spain and France are experiencing greater difficulties in ensuring a regular private sector of domestic and care services. In light of that, the paper analyses the recent economic conjuncture presenting some assumptions about the future risk of deeper inequalities rising along with the increase of the process of marketization of domestic and care services in all the countries under analysis.    

Validade científica de conhecimento epidemiológico gerado com base no estudo Saúde Bucal Brasil 2003

NARVAI, Paulo Capel et al. Validade científi ca de conhecimento epidemiológico gerado com base no estudo Saúde Bucal Brasil 2003. Caderno de saúde pública, Rio de Janeiro, v. 26, n. 4, p. 647-670, abr. 2010.

Multimodal attention system for an interactive robot

[EN]Social robots are receiving much interest in the robotics community. The most important goal for such robots lies in their interaction capabilities. An attention system is crucial, both as a filter to center the robot’s perceptual resources and as a mean of letting the observer know that the robot has intentionality. In this paper a simple but flexible and functional attentional model is described. The model, which has been implemented in an interactive robot currently under development, fuses both visual and auditive information extracted from the robot’s environment, and can incorporate knowledge-based influences on attention.

Redes Interorganizacionais: um estudo sobre partilha e utilização do conhecimento em organizações da Rede Associativa Empresarial da Região Centro de Portugal

Tese de doutoramento em Psicologia, na especialidade de Psicologia das Organizações, do Trabalho e dos Recursos Humanos

The Performance Characteristics of a Surface-Modified Cutting Tool

In the past, many papers have been presented which show that the coating of cutting tools often yields decreased wear rates and reduced coefficients of friction. Although different theories are proposed, covering areas such as hardness theory, diffusion barrier theory, thermal barrier theory, and reduced friction theory, most have not dealt with the question of how and why the coating of tool substrates with hard materials such as Titanium Nitride (TiN), Titanium Carbide (TiC) and Aluminium Oxide (Al203) transforms the performance and life of cutting tools. This project discusses the complex interrelationship that encompasses the thermal barrier function and the relatively low sliding friction coefficient of TiN on an undulating tool surface, and presents the result of an investigation into the cutting characteristics and performance of EDMed surface-modified carbide cutting tool inserts. The tool inserts were coated with TiN by the physical vapour deposition (PVD) method. PVD coating is also known as Ion-plating which is the general term of the coating method in which the film is created by attracting ionized metal vapour in this the metal was Titanium and ionized gas onto negatively biased substrate surface. Coating by PVD was chosen because it is done at a temperature of not more than 5000C whereas chemical Vapour Deposition CVD process is done at very high temperature of about 8500C and in two stages of heating up the substrates. The high temperatures involved in CVD affects the strength of the (tool) substrates. In this study, comparative cutting tests using TiN-coated control specimens with no EDM surface structures and TiN-coated EDMed tools with a crater-like surface topography were carried out on mild steel grade EN-3. Various cutting speeds were investigated, up to an increase of 40% of the tool manufacturer’s recommended speed. Fifteen minutes of cutting were carried out for each insert at the speeds investigated. Conventional tool inserts normally have a tool life of approximately 15 minutes of cutting. After every five cuts (passes) microscopic pictures of the tool wear profiles were taken, in order to monitor the progressive wear on the rake face and on the flank of the insert. The power load was monitored for each cut taken using an on-board meter on the CNC machine to establish the amount of power needed for each stage of operation. The spindle drive for the machine is an 11 KW/hr motor. Results obtained confirmed the advantages of cutting at all speeds investigated using EDMed coated inserts, in terms of reduced tool wear and low power loads. Moreover, the surface finish on the workpiece was consistently better for the EDMed inserts. The thesis discusses the relevance of the finite element method in the analysis of metal cutting processes, so that metal machinists can design, manufacture and deliver goods (tools) to the market quickly and on time without going through the hassle of trial and error approach for new products. Improvements in manufacturing technologies require better knowledge of modelling metal cutting processes. Technically the use of computational models has a great value in reducing or even eliminating the number of experiments traditionally used for tool design, process selection, machinability evaluation, and chip breakage investigations. In this work, much interest in theoretical and experimental investigations of metal machining were given special attention. Finite element analysis (FEA) was given priority in this study to predict tool wear and coating deformations during machining. Particular attention was devoted to the complicated mechanisms usually associated with metal cutting, such as interfacial friction; heat generated due to friction and severe strain in the cutting region, and high strain rates. It is therefore concluded that Roughened contact surface comprising of peaks and valleys coated with hard materials (TiN) provide wear-resisting properties as the coatings get entrapped in the valleys and help reduce friction at chip-tool interface. The contributions to knowledge: a. Relates to a wear-resisting surface structure for application in contact surfaces and structures in metal cutting and forming tools with ability to give wear-resisting surface profile. b. Provide technique for designing tool with roughened surface comprising of peaks and valleys covered in conformal coating with a material such as TiN, TiC etc which is wear-resisting structure with surface roughness profile compose of valleys which entrap residual coating material during wear thereby enabling the entrapped coating material to give improved wear resistance. c. Provide knowledge for increased tool life through wear resistance, hardness and chemical stability at high temperatures because of reduced friction at the tool-chip and work-tool interfaces due to tool coating, which leads to reduced heat generation at the cutting zones. d. Establishes that Undulating surface topographies on cutting tips tend to hold coating materials longer in the valleys, thus giving enhanced protection to the tool and the tool can cut faster by 40% and last 60% longer than conventional tools on the markets today.

Gestão da informação: um estudo de caso em um instituto de pesquisa tecnológica

Each two years the amount of available information in the world double. This is the Information Age, where the success depends on what one knows, not on what one has. A new economy appears with the capacity to generate, to store, to process and to apply effectively the knowledge, based on information, determining the companies productivity and competitiveness.The objective of this work is to understand the information management model of a technological research institute - CTGÁS (Gas Technology Center). The research has been done focused on the 5 main processes and the 15 support processes of the organization value chain , aiming to understand the information management in the organization based on Davenport´s Information Management model (1998). Therefore, it was necessary to identify how the necessary information for the organizational processes accomplishment are determined, obtained, distributed and used by the organization. The research can be classified as descriptive, regarding to its aims, and as a case study, related to the research ways. Interviews with the managers of the organization value chain processes have been carried through, with the objective to identify how they perceive the Information Management process that circulates in the organizational processes. Complementarily, a documentary research has been carried through, associated to the direct observation and procedures and actions follow up, involving the Information Management. The data treatment and analysis have been done from the authors theoretical support and from the managers interviews analysis, documents and processes observed by the researcher in the organization. It was noticed that the organization has raised its level of information needs that are not difficult to be determined and are satisfactorily obtained and distributed, although the majority of them are not structuralized, automatized or even classified regarding to its confidence. These peaces of information have good quality and are important, however they reflect a medium dependence on external and informal information, besides being used only in its great majority for people to know what and how to do something

Financialisation, Capital Accumulation and Economic Development : A Theoretical and Empirical Investigation of the Nigerian Economy

The primary focus of this study is to highlight those unobtrusive, yet fundamental, factors undermining economic development in Nigeria. To begin with, it posits that the decelerating pace of capital accumulation in Nigeria, which naturally occasions rising unemployment and poverty levels, and widening inequality gap, is the result of the ‘low possibility’ of capitalist enterprises in the country of earning an adequate rate of profit from their productive processes. In turn, the ‘low possibility’ is argued to be the result of the uneven development inherent in the modern capitalist structure, the high cost of capital and of production peculiar to Nigeria, and the ineffective demand for goods made in Nigeria: these elements are viewed as been precipitated by the contradictions of the contemporary political-economic arrangement that organises the Social Structures of Accumulation. For Nigeria to ‘develop’, it is contended that the unobtrusive elements inherent in the contradiction of the political-economic economic that undermine the capitalists’ ability to earn a commensurate rate of profit in the country needs to be fully addressed first. Furthermore, this study suggests that it is crucial the country embraces knowledge-based industrialisation if it is to achieve some form of ‘competitive advantage’ in the global market, which could enable its productive processes extract a commensurate level of profit from the market. To facilitate the knowledge-based industrialisation, the state should, not only create a conducive environment for industrial development but also play the lead role in transforming the peripheral and oil dependent economy to a knowledge-based economy by coordinating business organisations and investing in high-risk innovations.

Temporal reasoning about action and change

Abstract not available

La cartographie participative dans la gestion cadastrale coutumière dans la tribu de Wan Pwec à Hienghène en Nouvelle-Calédonie

La cartographie participative est l’une des multiples disciplines de la géomatique. Elle a débuté dans les années 1980 afin d’aider les populations locales des pays du Sud à développer leur territoire. C’est en Nouvelle-Calédonie, dans la tribu de Wan Pwec que nous allons voir les intérêts, d’un tel processus de cartographie participative. Il est important de souligner que ce n’est pas pour développer son territoire que cette discipline est utilisée, mais plutôt pour montrer et démontrer les logiques traditionnelles de gestion de la terre existant dans les tribus kanak : logiques traditionnelles basées sur un savoir transmis de génération en génération de façon orale. C’est sur les terres coutumières de la tribu de Wan Pwec, que nous allons voir comment la vision mentale possédée par les chefs de familles et le chef de clan administre et gère les terres familiales. C’est dans une société kanak caractérisée par une forte tradition orale et n’ayant connu aucun support papier pour conserver et archiver ses connaissances que ce mémoire s’incorpore. À l’aide de la géomatique, d’une étude de cas sur le terrain et d’autres disciplines (comme l’anthropologie, le droit, l’histoire, la géographie, etc.), ce mémoire propose les résultats de ses travaux sur le savoir traditionnel du foncier coutumier.

Decision-making process in Portuguese Erasmus student mobility: case study

With the evolution of nowadays knowledge-based economies, the labour class becomes more competitive. As a way of getting skills that bring benefits to their careers, university students take advantage of the many opportunities available and go abroad to study. This study develops and empirically tests a structural model that examines the antecedents that influence the decision-making process of an Erasmus student under mobility for studies (EMS) in Aveiro, Coimbra and Porto (2014-2015). Reliability analysis, exploratory factor analysis and linear regressions were used to evaluate the model. Based on a survey with a sample of 872 valid responses, this study has demonstrated that EMS students are also influenced by touristic factors, which gives support to what has recently been approached by other authors. Conclusions and suggestions can be applied by other organizations, mainly Higher Education Institutions in order to attract more EMS students.

Validade científica de conhecimento epidemiológico gerado com base no estudo Saúde Bucal Brasil 2003

NARVAI, Paulo Capel et al. Validade científi ca de conhecimento epidemiológico gerado com base no estudo Saúde Bucal Brasil 2003. Caderno de saúde pública, Rio de Janeiro, v. 26, n. 4, p. 647-670, abr. 2010.

Gestão do conhecimento e do capital intelectual - Estudo sobre a divulgação do capital intelectual em empresas portuguesas

Mestrado em Gestão e Empreendedorismo

Adaptability, Transformation and Complex Changes in Namibia and Tanzania: Resilience and Innovation System Development in Local Communities

This thesis is a research about the recent complex spatial changes in Namibia and Tanzania and local communities’ capacity to cope with, adapt to and transform the unpredictability engaged to these processes. I scrutinise the concept of resilience and its potential application to explaining the development of local communities in Southern Africa when facing various social, economic and environmental changes. My research is based on three distinct but overlapping research questions: what are the main spatial changes and their impact on the study areas in Namibia and Tanzania? What are the adaptation, transformation and resilience processes of the studied local communities in Namibia and Tanzania? How are innovation systems developed, and what is their impact on the resilience of the studied local communities in Namibia and Tanzania? I use four ethnographic case studies concerning environmental change, global tourism and innovation system development in Namibia and Tanzania, as well as mixed-methodological approaches, to study these issues. The results of my empirical investigation demonstrate that the spatial changes in the localities within Namibia and Tanzania are unique, loose assemblages, a result of the complex, multisided, relational and evolutional development of human and non-human elements that do not necessarily have linear causalities. Several changes co-exist and are interconnected though uncertain and unstructured and, together with the multiple stressors related to poverty, have made communities more vulnerable to different changes. The communities’ adaptation and transformation measures have been mostly reactive, based on contingency and post hoc learning. Despite various anticipation techniques, coping measures, adaptive learning and self-organisation processes occurring in the localities, the local communities are constrained by their uneven power relationships within the larger assemblages. Thus, communities’ own opportunities to increase their resilience are limited without changing the relations in these multiform entities. Therefore, larger cooperation models are needed, like an innovation system, based on the interactions of different actors to foster cooperation, which require collaboration among and input from a diverse set of stakeholders to combine different sources of knowledge, innovation and learning. Accordingly, both Namibia and Tanzania are developing an innovation system as their key policy to foster transformation towards knowledge-based societies. Finally, the development of an innovation system needs novel bottom-up approaches to increase the resilience of local communities and embed it into local communities. Therefore, innovation policies in Namibia have emphasised the role of indigenous knowledge, and Tanzania has established the Living Lab network.