Industrial districts, innovation and I-district

The I-district effect hypothesis establishes the existence of highly intense innovation in Marshallian industrial districts due to the presence of external localization economies. However, industrial districts are characterized by specific manufacturing specializations in such a way that this effect could be due to these dominant specializations. The objective of this research is to test whether the effect is explained by the conditions of the territory or by the industrial specialization and to provide additional evidence of the existence and causes of the highly intense innovation in industrial districts (I-district effect). The estimates for Spain of a fixed effects model interacting territory and industry suggest that the high innovative performance of industrial districts is maintained across sectors whereas the industrial specialization behaves differently depending on the type of local production system in which it is placed. The I-district effect is related to the conditions of the territory more than to the industrial specialization. The territory is a key variable in explaining the processes of innovation and should be considered a basic dimension in the design of innovation and industrial policies.

The Relative Efficiency of Automatic and Discretionary Industrial Aid

For the last two decades, the primary instruments for UK regional policy have been discretionary subsidies. Such aid is targeted at “additional” projects - projects that would not have been implemented without the subsidy - and the subsidy should be the minimum necessary for the project to proceed. Discretionary subsidies are thought to be more efficient than automatic subsidies, where many of the aided projects are non-additional and all projects receive the same subsidy rate. The present paper builds on Swales (1995) and Wren (2007a) to compare three subsidy schemes: an automatic scheme and two types of discretionary scheme, one with accurate appraisal and the other with appraisal error. These schemes are assessed on their expected welfare impacts. The particular focus is the reduction in welfare gain imposed by the interaction of appraisal error and the requirements for accountability. This is substantial and difficult to detect with conventional evaluation techniques.

Financial liberalisation and industrial development in Malawi

It has been suggested that financial liberalisation may be a key policy to promote industrialisation as it removes the credit access constraint on firms, especially small and medium ones. We investigate the effect of credit expansion in the wake of liberalisation on the structure of the industrial sectors in Malawi and find that, in contrast to the hypothesis above, it resulted in an increase in industrial concentration and a decrease in net firm entry, especially in sectors that are more finance dependent. The case of Malawi is interesting because financial liberalisation has been justified precisely as a means for industrial development and because the implementation of the policy has been regarded as relatively successful.

Infrastructure Finance and Industrial Takeoff in England

That financial matters did not constrain industrial takeoff in the UK is generally accepted in the historical literature; in contrast, contemporary empirical analyses have found evidence that financial development can be a causal determinant of economic growth. We look to reconcile these findings by concentrating on a particular aspect of industrialising UK where inefficiencies in finance could have had bite: The finance of physical infrastructures. We document the historical record and develop the importance of spatial disaggregation and spillovers in both technological and financial development. We develop a simple model that captures the nature of infrastructure finance within a theory of endogenous growth where financial costs are endogenous. We argue that the conception of the finance-growth nexus as a largely static, aggregative phenomenon misses out a good deal of complexity and we relate that complexity to a number of implications for regulation of both financial systems and the emergence of infrastructures

The Significance of Identifying Industrial clusters The Case of Scotland

Industrial clustering policy is now an integral part of economic development planning in most advanced economies. However, there have been concerns in some quarters over the ability of an industrial cluster-based development strategy to deliver its promised economic benefits and this has been increasingly been blamed on the failure by governments to identify industrial clusters. In a study published in 2001, the DTI identified clusters across the UK based on the comparative scale and significance of industrial sectors. The study identified thirteen industrial clusters in Scotland. However the clusters identified are not a homogeneous set and they seem to vary in terms of their geographic concentration within Scotland. This paper examines the spatial distribution of industries within Scotland, thereby identifying more localised clusters. The study follows as closely as possible the DTI methodology which was used to identify such concentrations of economic activity with particular attention directed towards the thirteen clusters identified by the DTI. The paper concludes with some remarks of the general problem of identifying the existence of industrial clusters.

Anatomy of contaminated aquifers of an industrial site: insights from the stable isotope compositions of waters and dissolved inorganic carbon

The hydrogen and oxygen isotopes of water and the carbon isotope composition of dissolved inorganic carbon (DIC) from different aquifers at an industrial site, highly contaminated by organic pollutants representing residues of the former gas production, have been used as natural tracers to characterize the hydrologic system. On the basis of their stable isotope compositions as well as the seasonal variations, different groups of waters (precipitation, surface waters, groundwaters and mineral waters) as well as seasonably variable processes of mixing between these waters can clearly be distinguished. In addition, reservoir effects and infiltration rates can be estimated. In the northern part of the site an influence of uprising mineral waters within the Quaternary aquifers, presumably along a fault zone, can be recognized. Marginal infiltration from the Neckar River in the cast and surface water infiltration adjacent to a steep hill on the western edge of the site with an infiltration rate of about one month can also be resolved through the seasonal variation. Quaternary aquifers closer to the centre of the site show no seasonal variations, except for one borehole close to a former mill channel and another borehole adjacent to a rain water channel. Distinct carbon isotope compositions and concentrations of DIC for these different groups of waters reflect variable influence of different components of the natural carbon cycle: dissolution of marine carbonates in the mineral waters, biogenic, soil-derived CO2 in ground- and surface waters, as well as additional influence of atmospheric CO2 for the surface waters. Many Quaternary aquifer waters have, however, distinctly lower delta(13)C(DIC) values and higher DIC concentrations compared to those expected for natural waters. Given the location of contaminated groundwaters at this site but also in the industrially well-developed valley outside of this site, the most likely source for the low C-13(DIC) values is a biodegradation of anthropogenic organic substances, in particular the tar oils at the site.

Spatial Takeoff in the First Industrial Revolution

Using the framework of Desmet and Rossi-Hansberg (forthcoming), we present a model of spatial takeoff that is calibrated using spatially-disaggregated occupational data for England in c.1710. The model predicts changes in the spatial distribution of agricultural and manufacturing employment which match data for c.1817 and 1861. The model also matches a number of aggregate changes that characterise the first industrial revolution. Using counterfactual geographical distributions, we show that the initial concentration of productivity can matter for whether and when an industrial takeoff occurs. Subsidies to innovation in either sector can bring forward the date of takeoff while subsidies to the use of land by manufacturing firms can significantly delay a takeoff because it decreases spatial concentration of activity.

Spatial Takeoff in the First Industrial Revolution

Using the framework of Desmet and Rossi-Hansberg (forthcoming), we present a model of spatial takeoff that is calibrated using spatially-disaggregated occupational data for England in c.1710. The model predicts changes in the spatial distribution of agricultural and manufacturing employment which match data for c.1817 and 1861. The model also matches a number of aggregate changes that characterise the first industrial revolution. Using counterfactual geographical distributions, we show that the initial concentration of productivity can matter for whether and when an industrial takeoff occurs. Subsidies to innovation in either sector can bring forward the date of takeoff while subsidies to the use of land by manufacturing firms can significantly delay a takeoff because it decreases spatial concentration of activity.

(Optimal) Spatial Aggregation in the Determinants of Industrial Location

Empirical studies on the determinants of industrial location typically use variables measured at the available administrative level (municipalities, counties, etc.). However, this amounts to assuming that the effects these determinants may have on the location process do not extent beyond the geographical limits of the selected site. We address the validity of this assumption by comparing results from standard count data models with those obtained by calculating the geographical scope of the spatially varying explanatory variables using a wide range of distances and alternative spatial autocorrelation measures. Our results reject the usual practice of using administrative records as covariates without making some kind of spatial correction. Keywords: industrial location, count data models, spatial statistics JEL classification: C25, C52, R11, R30

Purification and activity standardisation of a (166m)Ho solution.

As part of a project to use the long-lived (T(1/2)=1200a) (166m)Ho as reference source in its reference ionisation chamber, IRA standardised a commercially acquired solution of this nuclide using the 4pibeta-gamma coincidence and 4pigamma (NaI) methods. The (166m)Ho solution supplied by Isotope Product Laboratories was measured to have about 5% Europium impurities (3% (154)Eu, 0.94% (152)Eu and 0.9% (155)Eu). Holmium had therefore to be separated from europium, and this was carried out by means of ion-exchange chromatography. The holmium fractions were collected without europium contamination: 162h long HPGe gamma measurements indicated no europium impurity (detection limits of 0.01% for (152)Eu and (154)Eu, and 0.03% for (155)Eu). The primary measurement of the purified (166m)Ho solution with the 4pi (PC) beta-gamma coincidence technique was carried out at three gamma energy settings: a window around the 184.4keV peak and gamma thresholds at 121.8 and 637.3keV. The results show very good self-consistency, and the activity concentration of the solution was evaluated to be 45.640+/-0.098kBq/g (0.21% with k=1). The activity concentration of this solution was also measured by integral counting with a well-type 5''x5'' NaI(Tl) detector and efficiencies computed by Monte Carlo simulations using the GEANT code. These measurements were mutually consistent, while the resulting weighted average of the 4pi NaI(Tl) method was found to agree within 0.15% with the result of the 4pibeta-gamma coincidence technique. An ampoule of this solution and the measured value of the concentration were submitted to the BIPM as a contribution to the Système International de Référence.

A Modulated Closed Form solution for Quantitative Susceptibility Mapping - A thorough evaluation and comparison to iterative methods based on edge prior knowledge.

The aim of this study is to perform a thorough comparison of quantitative susceptibility mapping (QSM) techniques and their dependence on the assumptions made. The compared methodologies were: two iterative single orientation methodologies minimizing the l2, l1TV norm of the prior knowledge of the edges of the object, one over-determined multiple orientation method (COSMOS) and anewly proposed modulated closed-form solution (MCF). The performance of these methods was compared using a numerical phantom and in-vivo high resolution (0.65mm isotropic) brain data acquired at 7T using a new coil combination method. For all QSM methods, the relevant regularization and prior-knowledge parameters were systematically changed in order to evaluate the optimal reconstruction in the presence and absence of a ground truth. Additionally, the QSM contrast was compared to conventional gradient recalled echo (GRE) magnitude and R2* maps obtained from the same dataset. The QSM reconstruction results of the single orientation methods show comparable performance. The MCF method has the highest correlation (corrMCF=0.95, r(2)MCF =0.97) with the state of the art method (COSMOS) with additional advantage of extreme fast computation time. The l-curve method gave the visually most satisfactory balance between reduction of streaking artifacts and over-regularization with the latter being overemphasized when the using the COSMOS susceptibility maps as ground-truth. R2* and susceptibility maps, when calculated from the same datasets, although based on distinct features of the data, have a comparable ability to distinguish deep gray matter structures.