Electrochemical promotion of a platinum catalyst supported on the high-temperature proton conductor La0.99Sr0.01NbO4-δ

The recently discovered, high-temperature proton conductor, La_0.99Sr_0.01NbO_4-δ, was used as a support for the electrochemical promotion of a platinum catalyst. Ethylene oxidation was used as a probe reaction in the temperature range 350-450 °C. Moderate non-Faradaic rate modification, attributable to a protonic promoting species, occurred under negative polarisation; some permanent promotion was also observed. In oxidative atmospheres, both the p_O2 of the reaction mixture and the temperature influenced the type and magnitude of the observed rate modification. Rate-enhancement values of up to ρ = 1.4 and Faradaic-efficiency values approaching Λ = -100 were obtained. Promotion was observed under positive polarisation and relatively dry, oxygen-rich atmospheres suggesting that some oxygen ion conductivity may occur under these conditions. Impedance spectroscopy performed in atmospheres of 4 kPa O₂/N₂ and of 5 kPa H₂/N₂ under dry and slightly humidified (0.3 kPa H₂O) conditions indicated that the electrical resistivity is heavily dominated by the grain-boundary response in the temperature range of the EPOC studies; much lower grain-boundary impedances in the wetter conditions are likely to be attributable to proton transport. © 2009 Elsevier B.V. All rights reserved.

Comparative studies between classic and wireless electrochemical promotion of a Pt catalyst for ethylene oxidation

A comparative study between a classic and a wireless electrochemical promotion experiment was undertaken as a tool towards the better understanding of both systems. The catalytic modification of a platinum catalyst for ethylene oxidation was studied. The catalyst was supported on yttria-stabilised-zirconia (YSZ), a known pure oxide ion conductor, for the classic experiment and La _0.6Sr_0.4Co_0.2Fe_0.8O _3-δ-a mixed oxide ion electronic conductor-was used for the wireless experiment. The two systems showed certain similarities in terms of the reaction classification (in both cases electrophobic behaviour was observed) and the promotion mechanism. Significant difference was observed in the time scales and the reversibility of the induced rate modification. © 2008 Springer Science+Business Media B.V.

Electrochemical promotion of catalysis controlled by chemical potential difference across a mixed ionic-electronic conducting ceramic membrane - An example of wireless NEMCA

A La_0.6Sr_0.4Co_0.2F_0.8O₃ mixed ionic electronic conducting (MIEC) membrane was used in a dual chamber reactor for the promotion of the catalytic activity of a platinum catalyst for ethylene oxidation. By controlling the oxygen chemical potential difference across the membrane, a driving force for oxygen ions to migrate across the membrane and backspillover onto the catalyst surface is established. The reaction is then promoted by the formation of a double layer of oxide anions on the catalyst surface. Thelectronic conductivity of the membrane material eliminates the need for an external circuit to pump the promoting oxide ion species through the membrane and onto the catalyst surface. This renders this "wireless" system simpler and more amenable for large-scale practical application. Preliminary experiments show that the reaction rate of ethylene oxidation can indeed be promoted by almost one order of magnitude upon exposure to an oxygen atmosphere on the sweep side of the membrane reactor, and thus inducing an oxygen chemical potential difference across the membrane, as compared to the rate under an inert sweep gas. Moreover, the rate does not return to its initial unpromoted value upon cessation of the oxygen flow on the sweep side, but remains permanently promoted. A number of comparisons are drawn between the classical electrochemical promotion that utilises an external circuit and the "wireless" system that utilises chemical potential differences. In addition a 'surface oxygen capture' model is proposed to explain the permanent promotion of the catalyst activity. © 2007 Springer Science+Business Media, LLC.

Electrochemical promotion of a metal catalyst supported on a mixed-ionic conductor

It has been found that the catalytic activity and selectivity of a metal film deposited on a solid electrolyte could be enhanced dramatically and in a reversible way by applying an electrical current or potential between the metal catalyst and the counter electrode (also deposited on the electrolyte). This phenomenon is know as NEMCA [S. Bebelis, C.G. Vayenas, Journal of Catalysis, 118 (1989) 125-146.] or electrochemical promotion (EP) [J. Prichard, Nature, 343 (1990) 592.] of catalysis. Yttria-doped barium zirconate, BaZr_0.9Y_0.1O_{3 - α} (BZY), a known proton conductor, has been used in this study. It has been reported that proton conducting perovskites can, under the appropriate conditions, act also as oxide ion conductors. In mixed conducting systems the mechanism of conduction depends upon the gas atmosphere that to which the material is exposed. Therefore, the use of a mixed ionic (oxide ion and proton) conducting membrane as a support for a platinum catalyst may facilitate the tuning of the promotional behaviour of the catalyst by allowing the control of the conduction mechanism of the electrolyte. The conductivity of BZY under different atmospheres was measured and the presence of oxide ion conduction under the appropriate conditions was confirmed. Moreover, kinetic experiments on ethylene oxidation corroborated the findings from the conductivity measurements showing that the use of a mixed ionic conductor allows for the tuning of the reaction rate. © 2006 Elsevier B.V. All rights reserved.

Electrochemical promotion of catalysis using solid-state proton-conducting membranes

A solid-state electrochemical reactor with ceramic proton-conducting membrane has been used to study the effect of electrochemically induced hydrogen spillover on the catalytic activity of platinum during ethylene oxidation. Suitable proton-conducting electrolyte membranes (Gd-doped BaPrO ₃ (BPG) and Y-doped BaZrO₃ (BZY)) were fabricated. These materials were chosen because of their protonic conductivity in the operational temperature region of the reaction (400-700 °C). The BZY-based electrochemical cell was used to investigate the open-circuit voltage (OCV) dependence on H₂ partial pressure with comparison being made to the theoretical OCV as predicted by the Nernst equation. Furthermore, the BZY pellets were used to study the effect of proton transfer of the catalytic activity of platinum during ethylene oxidation. The reaction was found to exhibit electrochemical promotion at 400 °C and to be electrophilic in nature, i.e. proton addition to the platinum surface resulted in an increase in reaction rate. At higher temperatures, the rate was not affected, within experimental error, by proton addition or removal. Under similar conditions, AC impedance showed that there was a large overall cell resistance at 400 °C with significantly decreased resistance at higher temperatures. It is possible that there could be a relationship between large cell resistances and the onset of electrochemical promotion in this system but there is, as yet, no conclusive evidence for this. © 2003 Elsevier B.V. All rights reserved.

Industrial scale microwave processing of tomato juice using a novel continuous microwave system

This study evaluated the effect of an industrial scale continuous flow microwave volumetric heating system in comparison to conventional commercial scale pasteurisation for the processing of tomato juice in terms of physicochemical properties, microbial characteristics and antioxidant capacity. The effect against oxidative stress in Caco-2 cells, after in vitro digestion was also investigated. Physicochemical and colour characteristics of juices were very similar between technologies and during storage. Both conventional and microwave pasteurisation inactivated microorganisms and kept them in low levels throughout storage. ABTS⁺ values, but not ORAC, were higher for the microwave pasteurised juice at day 0 however no significant differences between juices were observed during storage. Juice processed with the microwave system showed an increased cytoprotective effect against H₂O₂ induced oxidation in Caco-2 cells. Organoleptic analysis revealed that the two tomato juices were very similar. The continuous microwave volumetric heating system appears to be a viable alternative to conventional pasteurisation.

Laser-driven x-ray and neutron source development for industrial applications of plasma accelerators

Pulsed beams of energetic x-rays and neutrons from intense laser interactions with solid foils are promising for applications where bright, small emission area sources, capable of multi-modal delivery are ideal. Possible end users of laser-driven multi-modal sources are those requiring advanced non-destructive inspection techniques in industry sectors of high value commerce such as aerospace, nuclear and advanced manufacturing. We report on experimental work that demonstrates multi-modal operation of high power laser-solid interactions for neutron and x-ray beam generation. Measurements and Monte Carlo radiation transport simulations show that neutron yield is increased by a factor ∼2 when a 1 mm copper foil is placed behind a 2 mm lithium foil, compared to using a 2 cm block of lithium only. We explore x-ray generation with a 10 picosecond drive pulse in order to tailor the spectral content for radiography with medium density alloy metals. The impact of using >1 ps pulse duration on laser-accelerated electron beam generation and transport is discussed alongside the optimisation of subsequent bremsstrahlung emission in thin, high atomic number target foils. X-ray spectra are deconvolved from spectrometer measurements and simulation data generated using the GEANT4 Monte Carlo code. We also demonstrate the unique capability of laser-driven x-rays in being able to deliver single pulse high spatial resolution projection imaging of thick metallic objects. Active detector radiographic imaging of industrially relevant sample objects with a 10 ps drive pulse is presented for the first time, demonstrating that features of 200 μm size are resolved when projected at high magnification.

The Risk Implications of Globalisation: An Exploratory Analysis of 105 Major Industrial Incidents (1971–2010)

This paper revisits work on the socio-political amplification of risk, which predicts that those living in developing countries are exposed to greater risk than residents of developed nations. This prediction contrasts with the neoliberal expectation that market driven improvements in working conditions within industrialising/developing nations will lead to global convergence of hazard exposure levels. It also contradicts the assumption of risk society theorists that there will be an ubiquitous increase in risk exposure across the globe, which will primarily affect technically more advanced countries. Reviewing qualitative evidence on the impact of structural adjustment reforms in industrialising countries, the export of waste and hazardous waste recycling to these countries and new patterns of domestic industrialisation, the paper suggests that workers in industrialising countries continue to face far greater levels of hazard exposure than those of developed countries. This view is confirmed when a data set including 105 major multi-fatality industrial disasters from 1971 to 2000 is examined. The paper concludes that there is empirical support for the predictions of socio-political amplification of risk theory, which finds clear expression in the data in a consistent pattern of significantly greater fatality rates per industrial incident in industrialising/developing countries.

A Microgrid Testbed for Interdisciplinary Research on Cyber-Secure Industrial Control in Power Systems

This paper describes a smart grid test bed comprising embedded generation, phasor measurement units (PMUs), and supporting ICT components and infrastructure. The test bed enables the development of a use case focused on a synchronous islanding scenario, where the embedded generation becomes islanded from the mains supply. Due to the provisioned control components, control strategy, and best-practice ICT support infrastructure, the islanded portion of the grid is able to continue to operate in a secure and dependable manner.

Surviving the industrial city: the female poor and the workhouse in late nineteenth-century Belfast

In common with many British cities, but unlike the rest of Ireland, late nineteenth-century Belfast experienced rapid industrialization and physical expansion. Women formed a significant proportion of the city’s workforce, attracted by the employment opportunities represented in the burgeoning textile industry. Many of them were economically vulnerable, however, and could find themselves destitute for a number of reasons. This article sets Belfast’s Poor Law workhouse in the landscape of welfare in the city, exploring how its use reflected the development of the city and the ways in which the female poor engaged with it in order to survive.

Theorizing temporary spatial clusters and institutional boundary-work in industrial markets

To better understand the nature of temporary spatial clusters (TSC’s) in industrial marketing settings, this conceptual paper first provides a theoretical synthesis of spatial understanding from the industrial marketing (IM) and economic geography (EG) fields, focusing particularly on Doreen Massey’s work on relational space. This leads to a conceptual schema for organizing the IM literature in terms of spatiality, and which also helps clarify the ontological nature of TSCs. We then move to introduce the notion of institutional boundary-work, drawing on the work of Thomas Gieryn, and Andrea Brighenti’s examination of territorology, to conceptualize the activities of market actors engaged in the ongoing social accomplishment of TSCs. Such activities, we suggest, involve these actors ‘marching’ boundaries to assume network influence and maintain market order in IM settings. In summary, therefore, our paper addresses two fundamental questions: i) How do we conceptualize the form of TSCs in IM settings? And, ii) what function(s) are TSCs performing (and how is this being undertaken) in IM? The paper closes by providing methodological guidance for how a research agenda on TSCs within IM activity might be developed, followed by a summary of the managerial implications that emerge from our theorizations.

Students´ Engagement In Schools: Differentiation and Promotion

The objective of this work is to present elements of the project Student engagement in Schools (SES). The team consists of 10 researchers from six Universities. Student engagement in schools is a multidimensional construct that unites affective, behavioural, and cognitive dimensions of student adaptation in the school and has influence on students‘outcomes. The team of researchers conceptualized two major studies, a differential study to analyze the relations between SES and contextual factors, personal factors, student’s outcomes, and a quasi-experimental study to analyze the effects on SES of a specific intervention programmes. In study 1, the sample size is around 600 students (150 6th graders, 150 7th graders, 150 9th graders, and 150 10th graders). We shall focus on years of school transition, with rural and urban populations, on different regions of the country, and on students with different family background. We shall conduct questionnaires with national and international scales. The study 2 will involve students in 7th and 9th grade, from four classes, two of the experimental group and two of the control group. Patterns of verbal communications between a teacher and students can influence the classroom environment and SES. This model of communication would result in more effective student management and more time on-task for learning.

Reconversão e Musealização de Espaços Industriais: Actas do Colóquio de Museologia Industrial

Conjunto de comunicações alusivas a projectos de reconversão e muealização de espaços industriais na região Norte de Portugal. São, também, apresentadas comunicações que refletem sobre os conceitos e experiências neste domínio, nomeadamente, em Inglaterra e Catalunha.

Phenolic compounds from forest industrial by-products

Em Portugal, as indústrias corticeira e de pasta de papel constituem um importante sector económico, contudo, gerando elevadas quantidades de subprodutos. Estes subprodutos poderiam ser explorados em aplicações de alto valor acrescentado, como fonte de compostos fenólicos, por exemplo, em vez de serem apenas queimados para produção de energia. Estes compostos são conhecidos pelas suas inúmeras propriedades, entre as quais, antioxidante, anti-inflamatória e anti-trombótica. Neste estudo as frações fenólicas da maior parte dos subprodutos gerados nas indústrias corticeira e de pasta de papel foram caracterizados em detalhe, com vista à sua valorização. A fração fenólica das cascas de Eucalyptus globulus, E. grandis, E. urograndis e E. maidenii, bem como da cortiça de Quercus suber e resíduos provenientes da sua exploração, nomeadamente, o pó de cortiça e os condensados negros, foi obtida por processos convencionais de extração sólido-líquido. No caso da casca de E. globulus, foi ainda avaliado o potencial de metodologias “verdes” no processo de extração de compostos fenólicos, usando extração com CO2 supercrítico. Esta técnica foi otimizada com recurso a metodologias de superfície de resposta. Na identificação e quantificação dos compostos fenólicos foi usada cromatografia líquida de alta resolução aliada a técnicas de espectrometria de massa. O teor de fenólicos totais foi ainda determinado pelo método de Folin- Ciocalteu, essencialmente para efeitos comparativos. A caracterização da fração fenólica de cada extrato foi ainda complementada com a análise da atividade antioxidante, usando o radical 2,2-difenil-1-picrilhidrazilo (DPPH). Foram identificados trinta compostos fenólicos na casca de E. globulus, 17 deles referenciados pela primeira vez como seus constituintes, nomeadamente os ácidos quínico, di-hidroxifenilacétic, cafeico e metil-elágico, bis-hexahidroxidifenoil( HHDP)-glucose, galoil- bis-HHDP-glucose, galoil-HHDPglucose, isoramnetina—hexosídeo, quercetina-hexosídeo, ácido metil-elágicopentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, mearnsetina, floridzina, mearnsetina-hexosídeo, luteolina e uma proantocianidina B. Neste trabalho, foi estudada pela primeira vez a composição fenólica das cascas de E. grandis, E. urograndis e E. maidenii. Treze, doze e vinte e quatro compostos fenólicos foram identificados nas cascas de E. grandis, E. urograndis e E. maidenii, respetivamente. Entre estes compostos encontram-se os ácidos quínico, gálico, metilgálico, protocatequínico, clorogénico e elágico, catequina, galoil-bis-HHDP-glucose, digaloilglucose, epicatequina, quercetina-glucoronídeo, di-hidroxiisopropilcromona- hexosídeo, isoramnetina-hexosídeo, ácido elágicoramnosídeo, taxifolina, quercetina-hexosídeo, di-hidroxi- (metilpropil)isopropilcromona-hexosídeo, ácido metil-elágico-pentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, aromadendrina-ramnosídeo, mearnsetina, mearnsetina-hexosídeo, eriodictiol, quercetina, isoramnetina e naringenina. A análise da fração fenólica da cortiça permitiu identificar vinte e dois compostos fenólicos, dez deles referenciados pela primeira vez como seus constituintes, nomeadamente, os ácidos quínico, salicílico, p-hidroxifenillático e metilgálico, ácido carboxílico da brevifolina, eriodictiol, naringenina, um éster isoprenílico do ácido cafeico, isoramnetina-ramnosídeo e isoramnetina. No pó de cortiça industrial foram identificados dezasseis compostos fenólicos, nomeadamente os ácidos quínico, gálico, protocatequínico, cafeico, ferúlico, elágico e metilgálico, esculetina, ácido carboxílico da brevifolina, coniferaldeído, um éster isoprenílico do ácido cafeico, uma dilactona do ácido valoneico, ácido elágico-pentosídeo, ácido elágico-ramnosídeo, isoramnetinaramnosídeo e isoramnetina. Destes, apenas o ácido elágico foi previamente referenciado como componente do pó de cortiça. Do mesmo modo, treze compostos fenólicos foram identificados no condensado negro, doze deles referenciados pela primeira vez como seus constituintes. São eles os ácidos quínico, gálico, p-hidroxifenil-láctico, protocatequínico, p-coumarico, cafeico e elágico, vanilina, esculetina, coniferaldeído, um éster isoprenílico do ácido cafeico e o eriodictiol. A extração supercrítica de compostos fenólicos da casca de eucalipto permitiu não só verificar os parâmetros que afetam a qualidade e quantidade finais dos extratos, como também obter os valores ótimos para estes parâmetros. Esta extração mostrou ainda ser bastante seletiva para determinados grupos de compostos fenólicos, como as flavanonas eriodictiol e naringenina e para o flavonol O-metilado isoramnetina. Este é também o primeiro estudo envolvendo a determinação da atividade antioxidante de extratos da cortiça e dos resíduos da sua exploração, bem como da casca de E. grandis, E. urograndis e E. maidenii. A vasta gama de compostos fenólicos identificados em cada extrato analisado, assim como as prominentes atividades antioxidantes, todas na mesma gama de valores do bem conhecido antioxidante comercial, ácido ascórbico, são claramente um grande contributo para a valorização destes subprodutos industriais.