Estimativas inferiores para dimensão de Hausdorff de repulsores não-uniformemente expansores

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of the Vertical Position of Maxillary Central Incisors on the Perception of Smile Esthetics Among Orthodontists and Laypersons

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Role of Implant/Abutment System on Torque Maintenance of Retention Screws and Vertical Misfit of Implant-Supported Crowns Before and After Mechanical Cycling

Purpose: This study aimed to evaluate the role of the implant/abutment system on torque maintenance of titanium retention screws and the vertical misfit of screw-retained implant-supported crowns before and after mechanical cycling. Materials and Methods: Three groups were studied: morse taper implants with conical abutments (MTC group), external-hexagon implants with conical abutments (EHC group), and external-hexagon implants with UCLA abutments (EHU group). Metallic crowns casted in cobalt-chromium alloy were used (n = 10). Retention screws received insertion torque and, after 3 minutes, initial detorque was measured. Crowns were retightened and submitted to cyclic loading testing under oblique loading (30 degrees) of 130 +/- 10 N at 2 Hz of frequency, totaling 1 x 10(6) cycles. After cycling, final detorque was measured. Vertical misfit was measured using a stereomicroscope. Data were analyzed by analysis of variance, Tukey test, and Pearson correlation test (P < .05). Results: All detorque values were lower than the insertion torque both before and after mechanical cycling. No statistically significant difference was observed among groups before mechanical cycling. After mechanical cycling, a statistically significantly lower loss of detorque was verified in the MTC group in comparison to the EHC group. Significantly lower vertical misfit values were noted after mechanical cycling but there was no difference among groups. There was no significant correlation between detorque values and vertical misfit. Conclusions: All groups presented a significant decrease of torque before and after mechanical cycling. The morse taper connection promoted the highest torque maintenance. Mechanical cycling reduced the vertical misfit of all groups, although no significant correlation between vertical misfit and torque loss was found.

Investigation of the Effect of Sealer Use on the Heat Generated at the External Root Surface during Root Canal Obturation Using Warm Vertical Compaction Technique with System B Heat Source

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vertical transmission of hepatitis C virus: A tale of multiple outcomes

Globally, hepatitis C virus (HCV) infection affects approximately 130 million people and 3 million new infections occur annually. HCV is also recognized as an important cause of chronic liver disease in children. The absence of proofreading properties of the HCV RNA polymerase leads to a highly error prone replication process, allowing HCV to escape host immune response. The adaptive nature of HCV evolution dictates the outcome of the disease in many ways. Here, we investigated the molecular evolution of HCV in three unrelated children who acquired chronic HCV infection as a result of mother-to-child transmission, two of whom were also coinfected with HIV-1. The persistence of discrete HCV variants and their population structure were assessed using median joining network and Bayesian approaches. While patterns of viral evolution clearly differed between subjects, immune system dysfunction related to HIV coinfection or persistent HCV seronegativity stand as potential mechanisms to explain the lack of molecular evolution observed in these three cases. In contrast, treatment of HCV infection with PegIFN, which did not lead to sustained virologic responses in all 3 cases, was not associated with commensurate variations in the complexity of the variant spectrum. Finally, the differences in the degree of divergence suggest that the mode of transmission of the virus was not the main factor driving viral evolution. (C) 2013 Elsevier B. V. All rights reserved.

Estudo da correlação linear entre a dimensão da largura maxilar e as dimensões das larguras de outras grandezas, lineares, transversas da face, em portadores de fissura transforame incisivo unilateral, através da cefalometria radiográfica, em norma frontal

This research presents the results of a cephalometric radiography study, in frontal norm, that was used to measure the possible linear correlations between several linear dimensions of the face, in a sample of a 140 caucasian brazilians, with an average age of 20 years, who were distributed in 2 groups as follows: Control group - formed of 35 males and 35 females, with no apparent facial deformities and with dental oclusion, not necessarily, in Angle's Class I; Unilateral cleft lip and palate group - formed of 35 males and 35 females with surgical correction of the up in the first year and of the palate until the third year of life, without orthodontic treatment. ln each teleradiography, the following parameters were measured using a computer: - Lateral orbit width or external orbit width (LOe) - Medial orbit width or internal orbit width (LOI) - Zygomatic width or facial width (LZI) - Mastold width (LMa) - Maxilar width (LMx) - Nasal width (LNa) - Condilar width (LCo) - Antigonial width (LGa) The values obtained were treated statistically using quantitative analysis (arithmetic mean, standard deviation, standard mean error, Person's variation factor and Pearson factor linear correlation). Theirs significance was established by Student's t test. The Pearson factor linear correlations determined between transverse linear cephalometric width dimensions of face in frontal norm for individuals of both groups and sex, with an average age of 20 years, were: ...

A dimensão pedagógica da pesquisa nos cursos de Biblioteconomia do Mercosul: reflexões sobre uma trajetória de harmonização curricular

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A dimensão interdisciplinar da análise documental nos contextos brasileiro e espanhol no âmbito da organização do conhecimento

Information organization can be considered as a nuclear area in Information Science and its historical background has been historically built based on three theoretical approaches: subject cataloguing, under a North-American influence, Indexing, under a British influence, and document analysis, under a French influence. In this sense, although one can consider the strong influence of the logic-linguistic approach of the French tradition in information organization both in Brazil and in Spain, it is not already clear in what extent the mentioned influence specifically occurs in Brazil and Spain as well as what are the dialogical perspectives between them. So, and in order to analyze how the Information Science academic environments in Brazil and in Spain conceive the interdisciplinary relationships in the domain of document analysis (DA), it was applied a questionnaire to Brazilian and Spain DO researchers based on the records of the Brazilian and the Spanish International Society for Knowledge Organization chapters. The results (64,5% of answers in Brazil and 60,6% in Spain) allowed the identification of 35 DA interdisciplinary relationships in Brazil and 98 in Spain, whose data were so grouped in 7 matrixes ? cognitive, philosophical, historical, logic-lingusitic, quantitative, social and political, and technological. It was possible to observe that the logical-linguistic matrix is strongly predominant (90% of the answers in Brazil and in Spain) what reflects the influence of the ideas of Jean-Claude Gardin. On the other side, the graphic visualization of authors´s network showed a strong perspective of dialogical relationships among Brazilian and Spanish DA researchers, based on the convergence of theoretical conceptions, what allow us to conclude the need of joint research policies between both coountries in order to make the mention ed dialogical relationships real and fruitful.

Three-point functions and su(1 vertical bar 1) spin chains

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigation of chemical changes in sealers during application of the warm vertical compaction technique

Aim To assess (i) heat generated by pluggers during warm vertical compaction of gutta-percha and investigation of temperature changes on the external root surface during canal filling, and (ii) the chemical changes of root canal sealers induced by heat.Methodology Four sealers, namely AH Plus, MTA Plus and two other experimental sealers based on tricalcium silicate, were characterised. External temperatures generated on the root surface during warm vertical compaction of gutta-percha with different sealers inside the root canal were monitored using an infrared thermography camera. Chemical changes induced by heating the sealers were assessed by Fourier transform infrared (FT-IR) spectroscopy.Results MTA Plus and the experimental sealers were composed of a cement and radiopacifier, with epoxy resin or a water-soluble polymer as dispersant, whilst AH Plus was epoxy resin-based. The heat generated at the tips of the continuous wave pluggers was found to be lower than the temperature set and indicated on the device LCD display. The sealers reduced the heat generated on the external root surfaces during the heating phase. AH Plus sustained changes to its chemical structure after exposure to heat, whilst the other sealers were unaffected.Conclusions The temperatures recorded at the tips of continuous wave pluggers varied with their taper and were lower than the temperature set on the System B LCD display. Root canal sealers reduced the dissipation of heat generated during warm vertical compaction, with the temperature at the external root surface maintained at 37-41 degrees C, a temperature below that is necessary to cause irreversible damage to bone and periodontium. The use of AH Plus sealer during warm vertical compaction techniques results in chemical changes in the sealer. The effect on sealer properties needs to be further investigated.

Vertical distribution by demographic groups of ghost crab Ocypode quadrata (Crustacea: Brachyura)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Complex modal analysis of a slender vertical rotor by finite elements method

In this paper, natural frequencies were analyzed (axial, torsional and flexural) and frequency response of a vertical rotor with a hard disk at the edge through the classical modal and complex analysis. The equation that rules the movement was obtained through the Lagrangian formulation. The model considered the effects of bending, torsion and axial deformation of the shaft, besides the gravitational and gyroscopic effects. The finite element method was used to discretize the structure into hollow cylindrical elements with 12 degrees of freedom. Mass, stiffness and gyroscopic matrices were explained consistently. The classical modal analysis, usually applied to stationary structures, does not consider an important characteristic of rotating machinery which are the methods of forward and backward whirl. Initially, through the traditional modal analysis, axial and torsional natural frequencies were obtained in a static shaft, since they do not suffer the influence of gyroscopic effects. Later research was performed by complex modal analysis. This type of tool, based on the use of complex coordinates to describe the dynamic behavior of rotating shaft, allows the decomposition of the system in two submodes, backward and forward. Thus, it is possible to clearly visualize that the orbit and direction of the precessional motion around the line of the rotating shaft is not deformed. A finite element program was developed using MATLAB (TM) and numerical simulations were performed to validate this model. Natural frequencies and directional frequency forced response (dFRF) were obtained using the complex modal analysis for a simple vertical rotor and also for a typical drill string used in the construction of oil wells.

Entre o direito à ternura e a 'pedagogia do amor': a dimensão (sócio-) afetiva da identidade docente

No mundo globalizado, a complexidade dos processos subjetivos e objetivos envolvidos na construção das identidades singulares e culturais exige pensar como o sujeito da atualidade sofre, experimenta e vivencia a diversidade de influências culturais nas quais está imerso. Neste contexto, escolheu-se, de um lado, a figura do professor como objeto de estudo, para saber como esta complexidade de processos perpassa a construção de sua identidade docente vinculada ao desenvolvimento pessoal, mas também profissional. Por outro lado, a influência dos livros de autoajuda também será objeto de estudo por apresentar um papel cada vez mais presente no preenchimento da perda de autoestima do professor, assim como da “perda de subjetividade”, visando elevar “a moral” dos professores, mas que nos passa a compreensão de uma contribuição dúbia para o exercício da profissão. Assim, nosso olhar volta-se para a questão da construção da identidade desse professor e do exercício de sua profissionalidade, considerando a questão da dimensão afetiva como um dos constructos da autoestima docente e de sua identidade. Tendo como referência esses pressupostos, este trabalho tem como objetivos: (a) averiguar nas políticas públicas de formação de professores como a dimensão (sócio-)afetiva (ou dimensão pessoal) vem sendo tratada nas propostas de formação docente; (b) identificar nos docentes que atuam em escolas da rede de ensino, educação básica, os aspectos constitutivos da dimensão (sócio-)afetiva (ou dimensão pessoal) da identidade do professor; e (c) assinalar nas descrições dos professores respondentes (a partir de fonte documental ou questionário) a existência ou não da literatura de autoajuda no cotidiano docente. Optou-se, como procedimento metodológico, pela pesquisa qualitativa, na perspectiva do “construtivismo social”... (Resumo completo, clicar acesso eletrônico abaixo)

Fractografia quantitativa: correlação entre dimensão fractal e tenacidade à fratura em compósitos fibra de carbono/epóxi

The fracture surfaces express the sequence of events of energy release due to crack propagation by linking the relief of the fracture to the loading stresses. This study aims to evaluate the heterogeneity of the critical zone for the advancement of the crack along its entire length in a thermoset composite carbon fiber and epoxy matrix, fractured in DCB testing (Double Cantilever Beam) and ENF (End-Notched Flexure). Investigations were made from image stacks obtained by optical reflection of extended depth from focus reconstruction. The program NIH Image J was used to obtain elevation map and fully focused images of the fracture surface, whose topographies were quantitatively analyzed. The monofractal behavior for DCB samples was assessed as being heterogeneous along the crack front and along the crack for all the conditionings. For the samples fractured in ENF test, there was a strong positive correlation to the natural condition, considering the fibers at 0° for the monofractal dimension and structural dimension (Df and Ds). For fibers at 90° to crack propagation, there was a moderate positive correlation for the textural dimension of natural condition. However, for the samples under ultraviolet condition and those subjected to thermal cycles, there was no correlation between the fractal dimension and fracture toughness in mode II

A fraternidade como prática pedagógica: um estudo sobre a dimensão pessoal e a dimensão profissional do professor

Não disponível