Plasma diagnostics and ITO film deposition by RF-assisted closed-field dual magnetron system

Deposition of indium tin oxide (ITO) among various transparent conductive materials on flexible organic substrates has been intensively investigated among academics and industrials for a whole new array of imaginative optoelectronic products. One critical challenge coming with the organic materials is their poor thermal endurances, considering that the process currently used to produce industry-standard ITO usually involves relatively high substrate temperature in excess of 200°C and post-annealing. A lower processing temperature is thus demanded, among other desires of high deposition rate, large substrate area, good uniformity, and high quality of the deposited materials. For this purpose, we developed an RF-assisted closed-field dual magnetron sputtering system. The “prototype” system consists of a 3-inch unbalanced dual magnetron operated at a closed-field configuration. An RF coil was fabricated and placed between the two magnetron cathodes to initiate a secondary plasma. The concept is to increase the ionization faction with the RF enhancement and utilize the ion energy instead of thermal energy to facilitate the ITO film growth. The closed-field unbalanced magnetrons create a plasma in the intervening region rather than confine it near the target, thus achieving a large-area processing capability. An RF-compensated Langmuir probe was used to characterize and compare the plasmas in mirrored balanced and closed-field unbalanced magnetron configurations. The spatial distributions of the electron density ne and electron temperature Te were measured. The density profiles reflect the shapes of the plasma. Rather than intensively concentrated to the targets/cathodes in the balanced magnetrons, the plasma is more dispersive in the closed-field mode with a twice higher electron density in the substrate region. The RF assistance significantly enhances ne by one or two orders of magnitude higher. The effect of various other parameters, such as pressure, on the plasma was also studied. The ionization fractions of the sputtered atoms were measured using a gridded energy analyzer (GEA) combined with a quartz crystal microbalance (QCM). The presence of the RF plasma effectively increases the ITO ionization fraction to around 80% in both the balanced and closed-field unbalanced configurations. The ionization fraction also varies with pressure, maximizing at 5-10 mTorr. The study of the ionization not only facilitates understanding the plasma behaviors in the RF-assisted magnetron sputtering, but also provides a criterion for optimizing the film deposition process. ITO films were deposited on both glass and plastic (PET) substrates in the 3-inch RF-assisted closed-field magnetrons. The electrical resistivity and optical transmission transparency of the ITO films were measured. Appropriate RF assistance was shown to dramatically reduce the electrical resistivity. An ITO film with a resistivity of 1.2×10-3 Ω-cm and a visible light transmittance of 91% was obtained with a 225 W RF enhancement, while the substrate temperature was monitored as below 110°C. X-ray photoelectron spectroscopy (XPS) was employed to confirm the ITO film stoichiometry. The surface morphology of the ITO films and its effect on the film properties were studied using atomic force microscopy (AFM). The prototype of RF-assisted closed-field magnetron was further extended to a larger rectangular shaped dual magnetron in a flat panel display manufacturing system. Similar improvement of the ITO film conductivities by the auxiliary RF was observed on the large-area PET substrates. Meanwhile, significant deposition rates of 25-42 nm/min were achieved.

Existence and weak-strong uniqueness for the Navier-Stokes-Smoluchowski system over moving domains

This dissertation concerns the well-posedness of the Navier-Stokes-Smoluchowski system. The system models a mixture of fluid and particles in the so-called bubbling regime. The compressible Navier-Stokes equations governing the evolution of the fluid are coupled to the Smoluchowski equation for the particle density at a continuum level. First, working on fixed domains, the existence of weak solutions is established using a three-level approximation scheme and based largely on the Lions-Feireisl theory of compressible fluids. The system is then posed over a moving domain. By utilizing a Brinkman-type penalization as well as penalization of the viscosity, the existence of weak solutions of the Navier-Stokes-Smoluchowski system is proved over moving domains. As a corollary the convergence of the Brinkman penalization is proved. Finally, a suitable relative entropy is defined. This relative entropy is used to establish a weak-strong uniqueness result for the Navier-Stokes-Smoluchowski system over moving domains, ensuring that strong solutions are unique in the class of weak solutions.

Rumours, Bargains and Lies: How to advocate Open Access repositories more successfully

In this workshop seminar delivered twice at the CoFHE/UCR 2006 conference the author explored aspects relating to successful advocacy of Open Access and repositories. Areas covered included preconceptions on the part of academics and support staff, as well as models of implementation of an advocacy programme. A large portion of the material pulls together experience and narrative evidence from the SHERPA Consortium partners and repository administrators; with a particular focus on their successes and failures and the lessons that have been learned.

Spectral Frame Analysis and Learning through Graph Structure

This dissertation investigates the connection between spectral analysis and frame theory. When considering the spectral properties of a frame, we present a few novel results relating to the spectral decomposition. We first show that scalable frames have the property that the inner product of the scaling coefficients and the eigenvectors must equal the inverse eigenvalues. From this, we prove a similar result when an approximate scaling is obtained. We then focus on the optimization problems inherent to the scalable frames by first showing that there is an equivalence between scaling a frame and optimization problems with a non-restrictive objective function. Various objective functions are considered, and an analysis of the solution type is presented. For linear objectives, we can encourage sparse scalings, and with barrier objective functions, we force dense solutions. We further consider frames in high dimensions, and derive various solution techniques. From here, we restrict ourselves to various frame classes, to add more specificity to the results. Using frames generated from distributions allows for the placement of probabilistic bounds on scalability. For discrete distributions (Bernoulli and Rademacher), we bound the probability of encountering an ONB, and for continuous symmetric distributions (Uniform and Gaussian), we show that symmetry is retained in the transformed domain. We also prove several hyperplane-separation results. With the theory developed, we discuss graph applications of the scalability framework. We make a connection with graph conditioning, and show the in-feasibility of the problem in the general case. After a modification, we show that any complete graph can be conditioned. We then present a modification of standard PCA (robust PCA) developed by Cand\`es, and give some background into Electron Energy-Loss Spectroscopy (EELS). We design a novel scheme for the processing of EELS through robust PCA and least-squares regression, and test this scheme on biological samples. Finally, we take the idea of robust PCA and apply the technique of kernel PCA to perform robust manifold learning. We derive the problem and present an algorithm for its solution. There is also discussion of the differences with RPCA that make theoretical guarantees difficult.

Methods matter: computational modelling in public health policy and planning

This work is aimed at understanding and unifying information on epidemiological modelling methods and how those methods relate to public policy addressing human health, specifically in the context of infectious disease prevention, pandemic planning, and health behaviour change. This thesis employs multiple qualitative and quantitative methods, and presents as a manuscript of several individual, data-driven projects that are combined in a narrative arc. The first chapter introduces the scope and complexity of this interdisciplinary undertaking, describing several topical intersections of importance. The second chapter begins the presentation of original data, and describes in detail two exercises in computational epidemiological modelling pertinent to pandemic influenza planning and policy, and progresses in the next chapter to present additional original data on how the confidence of the public in modelling methodology may have an effect on their planned health behaviour change as recommended in public health policy. The thesis narrative continues in the final data-driven chapter to describe how health policymakers use modelling methods and scientific evidence to inform and construct health policies for the prevention of infectious diseases, and concludes with a narrative chapter that evaluates the breadth of this data and recommends strategies for the optimal use of modelling methodologies when informing public health policy in applied public health scenarios.

Symbiotic Cities: Buenos Aires, Montevideo, and Mass Culture, 1910-1960

This dissertation examines how Buenos Aires emerged as a creative capital of mass culture and cultural industries in South America during a period when Argentine theater and cinema expanded rapidly, winning over a regional marketplace swelled by transatlantic immigration, urbanization and industrialization. I argue that mass culture across the River Plate developed from a singular dynamic of exchange and competition between Buenos Aires and neighboring Montevideo. The study focuses on the Argentine, Uruguayan, and international performers, playwrights, producers, cultural impresarios, critics, and consumers who collectively built regional cultural industries. The cultural industries in this region blossomed in the interwar period as the advent of new technologies like sound film created profitable opportunities for mass cultural production and new careers for countless theater professionals. Buenos Aires also became a global cultural capital in the wider Hispanic Atlantic world, as its commercial culture served a region composed largely of immigrants and their descendants. From the 1920s through the 1940s, Montevideo maintained a subordinate but symbiotic relationship with Buenos Aires. The two cities shared interlinked cultural marketplaces that attracted performers and directors from the Atlantic world to work in theatre and film productions, especially in times of political upheaval such as the Spanish Civil War and the Perón era in Argentina. As a result of this transnational process, Argentine mass culture became widely consumed throughout South America, competing successfully with Hollywood, European, and other Latin American cinemas and helping transform Buenos Aires into a cosmopolitan metropolis. By examining the relationship between regional and national frames of cultural production, my dissertation contributes to the fields of Latin American studies and urban history while seeking to de-center the United States and Europe from the central framing of transnational history.

Spatial and temporal measurements using polyoxometalate, enzymatic and biofilm layers on a CMOS 0.35 μm 64 X 64-pixel I.S.F.E.T. array sensor

This thesis presents the achievements and scientific work conducted using a previously designed and fabricated 64 x 64-pixel ion camera with the use of a 0.35 μm CMOS technology. We used an array of Ion Sensitive Field Effect Transistors (ISFETs) to monitor and measure chemical and biochemical reactions in real time. The area of our observation was a 4.2 x 4.3 mm silicon chip while the actual ISFET array covered an area of 715.8 x 715.8 μm consisting of 4096 ISFET pixels in total with a 1 μm separation space among them. The ion sensitive layer, the locus where all reactions took place was a silicon nitride layer, the final top layer of the austriamicrosystems 0.35 μm CMOS technology used. Our final measurements presented an average sensitivity of 30 mV/pH. With the addition of extra layers we were able to monitor a 65 mV voltage difference during our experiments with glucose and hexokinase, whereas a difference of 85 mV was detected for a similar glucose reaction mentioned in literature, and a 55 mV voltage difference while performing photosynthesis experiments with a biofilm made from cyanobacteria, whereas a voltage difference of 33.7 mV was detected as presented in literature for a similar cyanobacterial species using voltamemtric methods for detection. To monitor our experiments PXIe-6358 measurement cards were used and measurements were controlled by LabVIEW software. The chip was packaged and encapsulated using a PGA-100 chip carrier and a two-component commercial epoxy. Printed circuit board (PCB) has also been previously designed to provide interface between the chip and the measurement cards.

Development of business processes and sales reporting - Case recovered paper

The purpose of this research is to discover development points for business processes and sales reporting in the recovered paper sourcing organization. The processes under development are both sales and sourcing processes that were determined by the commissioning company. All of these processes have in common that there are used sales orders to organize the money flows correctly. Although the main objective is to source only recovered paper, the sourcing also brings by-products that cannot be utilized and are thus sold. As the purpose of the sales function is to only support the sourcing strategy, it should be organized as efficiently as possible. Investigating the current status of the processes and finding development points help in building proposals for enhanced process descriptions. In order that sales function could be analyzed, should the sales reporting be accurate and present the needed key figures. The current status of the processes as well as the possible problems and development ideas were researched with the help of interviews. Best practices could also be brought from other business lines in the commissioning company. The theory part was build according to relevant literature and scientific articles. The research indicates, that processes have shaped differently in sourcing organization’s business units. Local infrastructure and legislation sets certain limitations to the sourcing of recovered paper, and these circumstances cannot be changed. Customer-supplier power relations also affect to the formulation of business processes. In order to steer the processes, there has to be more internal controls. Still, the enterprise resource planning system also sets boundaries how the processes can be made more efficient.

Multiscale Modeling and Simulation of Stepped Crystal Surfaces

A primary goal of this dissertation is to understand the links between mathematical models that describe crystal surfaces at three fundamental length scales: The scale of individual atoms, the scale of collections of atoms forming crystal defects, and macroscopic scale. Characterizing connections between different classes of models is a critical task for gaining insight into the physics they describe, a long-standing objective in applied analysis, and also highly relevant in engineering applications. The key concept I use in each problem addressed in this thesis is coarse graining, which is a strategy for connecting fine representations or models with coarser representations. Often this idea is invoked to reduce a large discrete system to an appropriate continuum description, e.g. individual particles are represented by a continuous density. While there is no general theory of coarse graining, one closely related mathematical approach is asymptotic analysis, i.e. the description of limiting behavior as some parameter becomes very large or very small. In the case of crystalline solids, it is natural to consider cases where the number of particles is large or where the lattice spacing is small. Limits such as these often make explicit the nature of links between models capturing different scales, and, once established, provide a means of improving our understanding, or the models themselves. Finding appropriate variables whose limits illustrate the important connections between models is no easy task, however. This is one area where computer simulation is extremely helpful, as it allows us to see the results of complex dynamics and gather clues regarding the roles of different physical quantities. On the other hand, connections between models enable the development of novel multiscale computational schemes, so understanding can assist computation and vice versa. Some of these ideas are demonstrated in this thesis. The important outcomes of this thesis include: (1) a systematic derivation of the step-flow model of Burton, Cabrera, and Frank, with corrections, from an atomistic solid-on-solid-type models in 1+1 dimensions; (2) the inclusion of an atomistically motivated transport mechanism in an island dynamics model allowing for a more detailed account of mound evolution; and (3) the development of a hybrid discrete-continuum scheme for simulating the relaxation of a faceted crystal mound. Central to all of these modeling and simulation efforts is the presence of steps composed of individual layers of atoms on vicinal crystal surfaces. Consequently, a recurring theme in this research is the observation that mesoscale defects play a crucial role in crystal morphological evolution.

Avian flu: the creation of expectations in the interplay between science and the media

This paper examines the emerging cultural patterns and interpretative repertoires in reports of an impending pandemic of avian flu in the UK mass media and scientific journals at the beginning of 2005, paying particular attention to metaphors, pragmatic markers ('risk signals'), symbolic dates and scare statistics used by scientists and the media to create expectations and elicit actions. This study complements other work on the metaphorical framing of infectious disease, such as foot and mouth disease and SARS, tries to link it to developments in the sociology of expectations and applies insights from pragmatics both to the sociology of metaphor and the sociology of expectations.

Platinum–tin/carbon catalysts for ethanol oxidation: Influence of Sn content on the electroactivity and structural characteristics

Carbon-supported Pt–Sn catalysts commonly contain Pt–Sn alloy and/or Pt–Sn bimetallic systems (Sn oxides). Nevertheless, the origin of the promotion effect due to the presence of Sn in the Pt–Sn/C catalyst towards ethanol oxidation in acid media is still under debate and some contradictions. Herein, a series of Ptx–Sny/C catalysts with different atomic ratios are synthesized by a deposition process using formic acid as the reducing agent. Catalysts structure and chemical compositions are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) and their relationship with catalytic behavior towards ethanol electro-oxidation was established. Geometric structural changes are producing by highest Sn content (Pt1–Sn1/C) promoted the interaction of Pt and Sn forming a solid solution of Pt–Sn alloy phase, whereas, the intermediate and lowest Sn content (Pt2–Sn1/C and Pt3–Sn1/C, respectively) promoted the electronic structure modifications of Pt by Sn addition without the formation of a solid solution. The amount of Sn added affects the physical and chemical characteristics of the bimetallic catalysts as well as reducing the amount of Pt in the catalyst composition and maintaining the electrocatalytic activities at the anode. However, the influence of the Sn oxidation state in Pt–Sn/C catalysts surfaces and the alloy formation between Pt and Sn as well as with the atomic ratio on their catalytic activity towards ethanol oxidation appears minimal. Similar methodologies applied for synthesis of Ptx–Sny/C catalysts with a small change show differences with the results obtained, thus highlighting the importance of the conditions of the preparation method.

Sn@Pt and Rh@Pt core–shell nanoparticles synthesis for glycerol oxidation

The development and optimization of electrocatalysts for application in fuel cell systems have been the focus of a variety of studies where core–shell structures have been considered as a promising alternative among the materials studied. We synthesized core–shell nanoparticles of Sn x @Pt y and Rh x @Pt y (Sn@Pt, Sn@Pt2, Sn@Pt3, Rh@Pt, Rh@Pt2, and Rh@Pt3) through a reduction methodology using sodium borohydride. These nanoparticles were electrochemically characterized by cyclic voltammetry and further analyzed by cyclic voltammetry studying their catalytic activity toward glycerol electro-oxidation; chronoamperometry and potentiostatic polarization experiments were also carried out. The physical characterization was carried out by X-ray diffraction, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. The onset potential for glycerol oxidation was shifted in 130 and 120 mV on the Sn@Pt3/C and Rh@Pt3/C catalysts, respectively, compared to commercial Pt/C, while the stationary pseudo-current density, taken at 600 mV, increased 2-fold and 5-fold for these catalysts related to Pt/C, respectively. Thus, the catalysts synthesized by the developed methodology have enhanced catalytic activity toward the electro-oxidation of glycerol, representing an interesting alternative for fuel cell systems.

Platinum–rhodium–tin/carbon electrocatalysts for ethanol oxidation in acid media: effect of the precursor addition order and the amount of tin

Carbon-supported Pt x –Rh y –Sn z catalysts (x:y:z = 3:1:4, 6:2:4, 9:3:4) are prepared by Pt, Rh, and Sn precursors reduction in different addition order. The materials are characterized by X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy techniques and are evaluated for the electrooxidation of ethanol in acidic media by cyclic voltammetry, chronoamperometry, and anode potentiostatic polarization. The influence of both the order in which the precursors are added and the composition of metals in the catalysts on the electrocatalytic activity and physico-chemical characteristics of Pt x –Rh y –Sn z /C catalysts is evaluated. Oxidized Rh species prevail on the surface of catalysts synthesized by simultaneous co-precipitation, thus demonstrating the influence of synthesis method on the oxidation state of catalysts. Furthermore, high amounts of Sn in composites synthesized by co-precipitation result in very active catalysts at low potentials (bifunctional effect), while medium Sn load is needed for sequentially deposited catalysts when the electronic effect is most important (high potentials), since more exposed Pt and Rh sites are needed on the catalyst surface to alcohol oxidation. The Pt3–Rh1–Sn4/C catalyst prepared by co-precipitation is the most active at potentials lower than 0.55 V (related to bifunctional effect), while the Pt6–Rh2–Sn4/C catalyst, prepared by sequential precipitation (first Rh and, after drying, Pt + Sn), is the most active above 0.55 V.

Interoperable Resource Brokering with Policy-based Provisioning and Job Allocation

The increasing needs for computational power in areas such as weather simulation, genomics or Internet applications have led to sharing of geographically distributed and heterogeneous resources from commercial data centers and scientific institutions. Research in the areas of utility, grid and cloud computing, together with improvements in network and hardware virtualization has resulted in methods to locate and use resources to rapidly provision virtual environments in a flexible manner, while lowering costs for consumers and providers. However, there is still a lack of methodologies to enable efficient and seamless sharing of resources among institutions. In this work, we concentrate in the problem of executing parallel scientific applications across distributed resources belonging to separate organizations. Our approach can be divided in three main points. First, we define and implement an interoperable grid protocol to distribute job workloads among partners with different middleware and execution resources. Second, we research and implement different policies for virtual resource provisioning and job-to-resource allocation, taking advantage of their cooperation to improve execution cost and performance. Third, we explore the consequences of on-demand provisioning and allocation in the problem of site-selection for the execution of parallel workloads, and propose new strategies to reduce job slowdown and overall cost.

Routines in a European aquaculture company and the development of a Flavobacterium psychrophilum dose response pre-model in adult Rainbow Trout

An internship in a European company dealing with aquaculture and biotechnology - AquaBioTech Group, Malta - was undertaken to complete the Master Degree of Science in Aquaculture of the School of Tourism and Maritime Technology of the Polytechnic Institute of Leiria. Biotechnology and aquaculture are two areas that have been synergistically used to contribute for the progress and improvement of fish production. The AquaBioTech Group is an example of a company able to integrate these areas to maximizing their services. Located in Mosta (Malta) the company operates in a sustainable way using Recirculation Aquaculture Systems (RAS) to maintain aquaculture species. In collaboration with several companies and institutions, the AquaBioTech Group is involved and supports the development of important international research projects. The present report focuses on two important parts of the internship performed during 6 months. Initially, it will cover the operation and constitution of the company, describing the routines and techniques acquired. Then, it will describe a pathology trial that forms the practical and scientific component of this report. Despite the limitation to describe some confidential assays, this trial consisted in the infection of Rainbow Trout (Oncorhynchus mykiss) with the bacterium Flavobacterium psychrophilum in order to evaluate the mortality rates over time. The internship served to solidify theoretical knowledge acquired during the academic training, develop professional skills and provide an understanding of jobs available on the market.