Online Graduate Degree: Hospitality Executive Perceptions

Distance education is an option that allows managers to continue with work while completing a program of study The authors report on the establishment of a distance education graduate program and describes how participants learned of the program, what their motivations for participating were, how it impacted their jobs and personal lives, and what their initial reactions to the first courses were.

An evaluation of an intervention strategy for retention and determination of predictors of success for high -risk students in an associate degree nursing program

The purpose of this study was twofold: (1) to evaluate the effect of a specific instructional Intervention, a Nursing Theory Laboratory, on increasing the retention of high risk students in the associate degree nursing program at Miami-Dade Community College in Miami, Florida; and (2) to identify predictors of success of high risk nursing students in this associate degree nursing program.^ Data were collected from the 195 nursing students enrolled in Nursing Fundamentals during the 1985-1987 academic years, and identified as high risk students. Control and experimental groups were selected based on enrollment in the Nursing Theory Laboratory.^ Results were determined by analyzing several cross-tabulations of selected variables and yielding chi square values, t-tests, and two discriminant analyses. There was no significant relationship between age or ethnic background and enrollment in the Nursing Theory Laboratory. There was no significant relationship between enrollment in the Nursing Theory Laboratory and success in Nursing 1 (Nursing Fundamentals). There was a significant relationship between enrollment in the Nursing Theory Laboratory and success in Nursing 3 (Medical-Surgical Nursing). Writing assessment test scores in two entrance tests and high risk categories, based on the number of enrollments in required science courses, were identified as predictors of success in this program.^ The conclusion was that the Nursing Theory Laboratory does not significantly improve retention of high risk associate degree nursing students if they are enrolled in this intervention at the same time they are enrolled in Nursing Fundamentals. Since those students who were enrolled in the Nursing Theory Laboratory had a significantly higher success rate in Nursing 3, than those students who were not enrolled in the Nursing Theory Laboratory, a recommendation of this study was to offer the Nursing Theory Laboratory to high risk students prior to the beginning of nursing courses. Another recommendation was that students deficient in reading and writing skills should be required to enroll in developmental courses prior to enrollment in the nursing course. ^

The knowledge and use of critical thinking teaching strategies of faculty in associate degree nursing education programs

The purpose of this study was to determine the knowledge and use of critical thinking teaching strategies by full-time and part-time faculty in Associate Degree Nursing (ADN) programs. Sander's CTI (1992) instrument was adapted for this study and pilottested prior to the general administration to ADN faculty in Southeast Florida. This modified instrument, now termed the Burroughs Teaching Strategy Inventory (BTSI), returned reliability estimates (Cronbach alphas of .71, .74, and .82 for the three constructs) comparable to the original instrument. The BTSI was administered to 113 full-time and part-time nursing faculty in three community college nursing programs. The response rate was 92% for full-time faculty (n = 58) and 61 % for part-time faculty (n = 55). The majority of participants supported a combined definition of critical thinking in nursing which represented a composite of thinking skills that included reflective thinking, assessing alternative viewpoints, and the use of problem-solving. Full-time and part-time faculty used different teaching strategies. Fulltime faculty most often used multiple-choice exams and lecture while part-time faculty most frequently used discussion within their classes. One possible explanation for specific strategy choices and differences might be that full-time faculty taught predominately in theory classes where certain strategies would be more appropriate and part-time faculty taught predominately clinical classes. Both faculty types selected written nursing care plans as the second most effective critical thinking strategy. Faculty identified several strategies as being effective in teaching critical thinking. These strategies included discussion, case studies, higher order questioning, and concept analysis. These however, were not always the strategies that were used in either the classroom or clinical setting. Based on this study, the author recommends that if the profession continues to stress critical thinking as a vital component of practice, nursing faculty should receive education in appropriate critical teaching strategies. Both in-service seminars and workshops could be used to further the knowledge and use of critical thinking strategies by faculty. Qualitative research should be done to determine why nursing faculty use self-selected teaching strategies.

Design and development of a one-degree-of-freedom force-reflecting manual controller prototype for teleoperation

The present research is carried out from the viewpoint of primarily space applications where human lives may be in danger if they are to work under these conditions. This work proposes to develop a one-degree-of-freedom (1-DOF) force-reflecting manual controller (FRMC) prototype for teleoperation, and address the effects of time delays commonly found in space applications where the control is accomplished via the earth-based control stations. To test the FRMC, a mobile robot (PPRK) and a slider-bar were developed and integrated to the 1-DOF FRMC. The software developed in Visual Basic is able to telecontrol any platform that uses an SV203 controller through the internet and it allows the remote system to send feedback information which may be in the form of visual or force signals. Time delay experiments were conducted on the platform and the effects of time delay on the FRMC system operation have been studied and delineated.

Half-degree gridded nitrogen and phosphorus fertilizer use for global agriculture production during 1900-2013

In addition to enhance agricultural productivity, synthetic nitrogen (N) and phosphorous (P) fertilizer application in croplands dramatically altered global nutrient budget, water quality, greenhouse gas balance, and their feedbacks to the climate system. However, due to the lack of geospatial fertilizer input data, current Earth system/land surface modeling studies have to ignore or use over-simplified data (e.g., static, spatially uniform fertilizer use) to characterize agricultural N and P input over decadal or century-long period. We therefore develop a global time-series gridded data of annual synthetic N and P fertilizer use rate in croplands, matched with HYDE 3,2 historical land use maps, at a resolution of 0.5º latitude by longitude during 1900-2013. Our data indicate N and P fertilizer use rates increased by approximately 8 times and 3 times, respectively, since the year 1961, when IFA (International Fertilizer Industry Association) and FAO (Food and Agricultural Organization) survey of country-level fertilizer input were available. Considering cropland expansion, increase of total fertilizer consumption amount is even larger. Hotspots of agricultural N fertilizer use shifted from the U.S. and Western Europe in the 1960s to East Asia in the early 21st century. P fertilizer input show the similar pattern with additional hotspot in Brazil. We find a global increase of fertilizer N/P ratio by 0.8 g N/g P per decade (p< 0.05) during 1961-2013, which may have important global implication of human impacts on agroecosystem functions in the long run. Our data can serve as one of critical input drivers for regional and global assessment on agricultural productivity, crop yield, agriculture-derived greenhouse gas balance, global nutrient budget, land-to-aquatic nutrient loss, and ecosystem feedback to the climate system.

Degree of conversion of different composite resins photo-activated with light-emitting diode and argon ion laser

This study evaluated the degree of conversion (DC%) of one experimental and different brands of composite resins light-cured by two light sources (one LED and one argon laser). The percentage of unreacted C = C was determined from the ratio of absorbance intensities of aliphatic C = C (peak at 1637 cm−1) against internal standards before and after curing: aromatic C–C (peak at 1610 cm−1) except for P90, where %C = C bonds was given for C–O–C (883 cm−1) and C–C (1257 cm−1). ANOVA and Tukey’s test revealed no statistically significant difference among Z350 (67.17), Z250 (69.52) and experimental (66.61 ± 2.03) with LED, just among them and Evolu-X (75.51) and P90 (32.05) that showed higher and lower DC%, respectively. For the argon laser, there were no differences among Z250 (70.67), Z350 (69.60), experimental (65.66) and Evolu-X (73, 37), however a significant difference was observed for P90 (36.80), which showed lowest DC%. The light sources showed similar DC%, however the main difference was observed regarding the composite resins. The lowest DC% was observed for the argon laser. P90 showed the lowest DC% for both light-curing sources.

Evaluation of degree of conversion and hardness of dental composites photo-activated with different light guide tips

Objective: The aim of this study was to evaluate the degree of conversion and hardness of different composite resins, photo-activated for 40 s with two different light guide tips, fiber optic and polymer. Methods: Five specimens were made for each group evaluated. The percentage of unreacted carbon double bonds (% C═C) was determined from the ratio of absorbance intensities of aliphatic C═C (peak at 1637 cm−1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm−1). The Vickers hardness measurements were performed in a universal testing machine. A 50 gf load was used and the indenter with a dwell time of 30 seconds. The degree of conversion and hardness mean values were analyzed separately by ANOVA and Tukey’s test, with a significance level set at 5%. Results: The mean values of degree of conversion for the polymer and fiber optic light guide tip were statistically different (P<.001). The hardness mean values were statistically different among the light guide tips (P<.001), but also there was difference between top and bottom surfaces (P<.001). Conclusions: The results showed that the resins photo-activated with the fiber optic light guide tip promoted higher values for degree of conversion and hardness.

Sediment age, abundance of planktonic foraminifera shells, degree of their dissolution, percentage of benthic foraminifera in total foram fauna, Core GC-11, Sea of Okhotsk

Taxonomic composition and distribution of planktonic foraminifera are studied in section of Core GC-11 penetrated through Upper Quaternary sediments of the Bowers Ridge western slope, south Bering Sea. It is shown that structure of foraminiferal assemblage and productivity varied substantially during the last 32000 calendar years in response to changes in surface water temperatures and water mass circulation in the North Pacific including the Bering Sea. Productivity was maximal during the deglaciation epoch, being notably lower in Holocene and minimal at glaciation time.

The SCUBA HAlf degree extragalactic survey - III. Identification of radio and mid-infrared counterparts to submillimetre galaxies

Determining an accurate position for a submillimetre (submm) galaxy (SMG) is the crucial step that enables us to move from the basic properties of an SMG sample - source counts and 2D clustering - to an assessment of their detailed, multiwavelength properties, their contribution to the history of cosmic star formation and their links with present-day galaxy populations. In this paper, we identify robust radio and/or infrared (IR) counterparts, and hence accurate positions, for over two-thirds of the SCUBA HAlf-Degree Extragalactic Survey (SHADES) Source Catalogue, presenting optical, 24-μm and radio images of each SMG. Observed trends in identification rate have given no strong rationale for pruning the sample. Uncertainties in submm position are found to be consistent with theoretical expectations, with no evidence for significant additional sources of error. Employing the submm/radio redshift indicator, via a parametrization appropriate for radio-identified SMGs with spectroscopic redshifts, yields a median redshift of 2.8 for the radio-identified subset of SHADES, somewhat higher than the median spectroscopic redshift. We present a diagnostic colour-colour plot, exploiting Spitzer photometry, in which we identify regions commensurate with SMGs at very high redshift. Finally, we find that significantly more SMGs have multiple robust counterparts than would be expected by chance, indicative of physical associations. These multiple systems are most common amongst the brightest SMGs and are typically separated by 2-6 arcsec, similar to 15-20/sin i kpc at z~ 2, consistent with early bursts seen in merger simulations.

Is Pairing with a Relative Heritable? : Estimating Female and Male Genetic Contributions to the Degree of Biparental Inbreeding in Song Sparrows (Melospiza melodia)

We thank the Tsawout and Tseycum First Nation bands for access to Mandarte, everyone who contributed to the long-term data collection, and the European Research Council and Royal Society for funding. We thank J.D. Hadfield, P. Bijma, E. Postma, and L.F. Keller for illuminatingdiscussions. Also, L.E.B. Kruuk, R. Bonduriansky, and an anonymous reviewer provided insightful comments that improved the manuscript.

Laboratory focussed learning of core electronic engineering concepts in the first year of an honours degree programme

In common with most universities teaching electronic engineering in the UK, Aston University has seen a shift in the profile of its incoming students in recent years. The educational background of students has moved away from traditional Alevel maths and science and if anything this variation is set to increase with the introduction of engineering diplomas. Another major change to the circumstances of undergraduate students relates to the introduction of tuition fees in 1998 which has resulted in an increased likelihood of them working during term time. This may have resulted in students tending to concentrate on elements of the course that directly provide marks contributing to the degree classification. In the light of these factors a root and branch rethink of the electronic engineering degree programme structures at Aston was required. The factors taken into account during the course revision were:. Changes to the qualifications of incoming students. Changes to the background and experience of incoming students. Increase in overseas students, some with very limited practical experience. Student focus on work directly leading to marks. Modular compartmentalisation of knowledge. The need for provision of continuous feedback on performance We discuss these issues with specific reference to a 40 credit first year electronic engineering course and detail the new course structure and evaluate the effectiveness of the changes. The new approach appears to have been successful both educationally and with regards to student satisfaction. The first cohort of students from the new course will graduate in 2010 and results from student surveys relating particularly to project and design work will be presented at the conference. © 2009 K Sugden, D J Webb and R P Reeves.

Conceptual designs of multi-degree of freedom compliant parallel manipulators composed of wire-beam based compliant mechanisms

This paper proposes conceptual designs of multi-degree(s) of freedom (DOF) compliant parallel manipulators (CPMs) including 3-DOF translational CPMs and 6-DOF CPMs using a building block based pseudo-rigid-body-model (PRBM) approach. The proposed multi-DOF CPMs are composed of wire-beam based compliant mechanisms (WBBCMs) as distributed-compliance compliant building blocks (CBBs). Firstly, a comprehensive literature review for the design approaches of compliant mechanisms is conducted, and a building block based PRBM is then presented, which replaces the traditional kinematic sub-chain with an appropriate multi-DOF CBB. In order to obtain the decoupled 3-DOF translational CPMs (XYZ CPMs), two classes of kinematically decoupled 3-PPPR (P: prismatic joint, R: revolute joint) translational parallel mechanisms (TPMs) and 3-PPPRR TPMs are identified based on the type synthesis of rigid-body parallel mechanisms, and WBBCMs as the associated CBBs are further designed. Via replacing the traditional actuated P joint and the traditional passive PPR/PPRR sub-chain in each leg of the 3-DOF TPM with the counterpart CBBs (i.e. WBBCMs), a number of decoupled XYZ CPMs are obtained by appropriate arrangements. In order to obtain the decoupled 6-DOF CPMs, an orthogonally-arranged decoupled 6-PSS (S: spherical joint) parallel mechanism is first identified, and then two example 6-DOF CPMs are proposed by the building block based PRBM method. It is shown that, among these designs, two types of monolithic XYZ CPM designs with extended life have been presented.

Does the degree of coarctation of the aorta influence wall shear stress focal heterogeneity?

The development of atherosclerosis in the aorta is associated with low and oscillatory wall shear stress for normal patients. Moreover, localized differences in wall shear stress heterogeneity have been correlated with the presence of complex plaques in the descending aorta. While it is known that coarctation of the aorta can influence indices of wall shear stress, it is unclear how the degree of narrowing influences resulting patterns. We hypothesized that the degree of coarctation would have a strong influence on focal heterogeneity of wall shear stress. To test this hypothesis, we modeled the fluid dynamics in a patient-specific aorta with varied degrees of coarctation. We first validated a massively parallel computational model against experimental results for the patient geometry and then evaluated local shear stress patterns for a range of degrees of coarctation. Wall shear stress patterns at two cross sectional slices prone to develop atherosclerotic plaques were evaluated. Levels at different focal regions were compared to the conventional measure of average circumferential shear stress to enable localized quantification of coarctation-induced shear stress alteration. We find that the coarctation degree causes highly heterogeneous changes in wall shear stress.

Degree classification and recent graduates’ ability: Is there any signalling effect?

Research across several countries has shown that degree classification (i.e. the final grade awarded to students successfully completing university) is an important determinant of graduates’ first destination outcome. Graduates leaving university with higher degree classifications have better employment opportunities and a higher likelihood of continuing education relative to those with lower degree classifications. This article investigates whether one of the reasons for this result is that employers and higher education institutions use degree classification as a signalling device for the ability that recent graduates may possess. Given the large number of applicants and the amount of time and resources typically required to assess their skills, employers and higher education institutions may decide to rely on this measure when forming beliefs about recent graduates’ abilities. Using data on two cohorts of recent graduates from a UK university, results suggest that an Upper Second degree classification may have a signalling role.

Training proposal in the degree of Master of Early Childhood Education for working the method of historical research in the classroom

Future teachers must be competent in creating educational settings, which provide tools to their students future they can develop a conscious mind, able to interpret their experiences, to make decisions and imagine innovative solutions to help you participate autonomously and responsible in society. This requires an educational system that allows them to integrate the subjective into a broader spatial and temporal context. La patrimonializatión of “Cultural artefacts” and oral history, the basis of which, are found in the active mind and links both the personal and the group experience, don’t only serve as a catalyst to achieving this goal, but rather, they facilitate the implementation of established practice in infant education. To gain this experience we offer the opportunity for students of their degree in Infant Education in the Public University of Navarre, training within the framework of social didactics, allowing students to learn about established practice from iconic, materials and oral sources in the Archive of Intangible Cultural Heritage of Navarra. The vidences points to their effectiveness and presented in a work in progress.