Avaliação do potencial genotóxico e citotóxico associado a queima artesanal da castanha de caju no Município de João Câmara

The Brazil is the third largest producer of cashew nuts in the world. Despite the social and economic importance of the cashew nut, its production is still carried out artisanally. One of the main problems encountered in the cashew production chain are the conditions under which the roasting of the nut occurs to obtain the kernel from the shell. In the present study was conducted a biomonitoring of the genotoxic and cytotoxicity effects associated with the elements from the cashew nut roasting in João Câmara - RN, semi-arid region of Brazil. To assess the genotoxic was used the bioassay of micronucleus (MN) in Tradescantia pallida. In addition, it was performed a comparative between the Tradescantia pallida and KU-20 and other biomarkers of DNA damage, such as the nucleoplasmic bridges (NBP) and nuclear fragments (NF) were quantified. The levels of particulate matter (PM1.0, PM2.5, PM10) and black carbon (BC) were also measured and the inorganic chemical composition of the PM2.5 collected was determined using X-ray fluorescence spectrometry analysis and the assessment of the cytotoxicity by MTT assay and exclusion method by trypan blue. . For this purpose, were chosen: the Amarelão community where the roasting occurs and the Santa Luzia farm an area without influence of this process. The mean value of PM2.5 (Jan 2124.2 μg/m3; May 1022.2 μg/m3; Sep 1291.9 μg/m3) and BC (Jan 363.6 μg/m3; May 70.0 μg/m3; Sep 69.4 μg/m3) as well as the concentration of the elements Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br and Pb obtained at Amarelão was significantly higher than at Santa Luzia farm. The genotoxicity tests with T. pallida indicated a significant increase in the number of MN, NBP and NF and it was found a negative correlation between the frequency of these biomarkers and the rainfall. The concentrations of 200 μg/mL and 400 μg/mL of PM2.5 were cytotoxic to MRC-5 cells. All together, the results indicated genotoxicity and citotoxicity for the community of Amarelão, and the high rates of PM2.5 considered a potential contributor to this effect, mainly by the high presence of transition metals, especially Fe, Ni, Cu, Cr and Zn, these elements have the potential to cause DNA damage. Other nuclear alterations, such as the NPBs and NFs may be used as effective biomarkers of DNA damage in tetrads of Tradescantia pallida. The results of this study enabled the identification of a serious occupational problem. Accordingly, preventative measures and better practices should be adopted to improve both the activity and the quality of life of the population. These measures are of fundamental importance for the sustainable development of this activity.

Coordenação entre as respostas da catalase e da ascorbato peroxidade em folhas de feijão caupi submetidas a diferentes fontes de peróxido de hidrogênio

The plants are often exposed to variations in environmental conditions that may trigger metabolic disturbances leading to a consequent loss in productivity of crops. These stressful conditions usually induce an accumulation of reactive oxygen species (ROS) in the cell, a condition known how oxidative stress. Among these species, hydrogen peroxide (H2O2) is an important molecule involved in numerous signaling mechanisms. The present study aimed to understand the relationship between the different enzymatic mechanisms of elimination of H2O2 by catalase (CAT) and ascorbate peroxidase (APX) in leaf tissues of seedlings of the species Vigna unguiculata L. Walp, under conditions of oxidative stress induced by application of CAT inhibitor, 3-amino-1,2,4-triazole (3-AT), and H2O2 itself on the roots. Three experiments were conducted. The first experiment was performed applying the compound 3-AT (5 mM) during the time (hours). In the second experiment, seedlings were exposed to different concentrations of H2O2 (2.5, 5.0, 7.5, 10 mM) for 48 h. The third strategy included the pre-treatment with H2O2 (2.5 mM) for 24 h, followed by subsequent treatment with the inhibitor 3-AT and recovery control condition. Treatment with 3-AT causes a strong inhibition of CAT activity in leaf tissues accompanied by an increase of activity of APX. However a decrease in oxidative damage to lipids is not observed as indicated by TBARS. It was observed that activity of APX is directly linked to the content of peroxide. Inductions in the activities of CAT and APX were observed mainly in the seedlings treated with 2.5 mM H2O2. This can be associated with a decrease in oxidative damage to lipids. In contrast, one same tendency was not observed in treatments with higher concentrations of this ROS. These results suggest that the concentration of 2.5 mM H2O2 can induce responses antioxidants later in seedling cowpea. This concentration when applied as pre-treatment for 24 h promoted an induction systems removers CAT and APX, both in activity and in terms of gene expression. However this increment was not observed in the recovered plants and the plants subsequently subjected to 3-AT. Additionally, the pretreatment was not sufficient to attenuate the inhibition of CAT activity and oxidative damage to lipids caused by the subsequent application of this inhibitor. The results showed that the application of 3-AT and H2O2 in the root systems of seedlings of cowpea promote changes in the parameters analyzed in leaf tissues that indicate a direct response to the presence of these factors or systemic signaling mecanisms. H2O2 appears to activate the responses of two antioxidant systems in this study thar does not promote greater protection in case of additional treatment with 3-AT. This demonstrates the importance of the CAT system. In this work, complete results indicate that there is a difference between the signaling and the effects caused by exposure to H2O2 and by treatment with 3-AT

Atividade antioxidante e antiproliferativa de extratos de folhas de Plukenetia volubilis L. (EUPHORBIACEAE)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Aplicação das fórmulas CIELAB e CIEDE2000 na avaliação da cor de folhas vegetais irradiadas por uma fonte de Cobalto-60

A cor dos alimentos está directamente associada à sua aceitação pelo consumidor. A procura de métodos de processamento seguros e eficazes destaca a radiação ionizante, já que permite a desinfecção do alimento e a extensão do seu tempo de prateleira [1]. O espaço de cor CIELAB é comummente utilizado para avaliar diferenças de cor (ΔE*) entre dois objectos. No entanto, a fórmula CIEDE2000 permite atenuar variações entre valores calculados e percepcionados [2]. O impacto da radiação ionizante na cor de um vegetal folhoso foi avaliado durante o tempo de armazenamento e os resultados discutidos utilizando ambas as fórmulas de ΔE*.

Variação sazonal da concentração de nutrientes em folhas de bananeiras, no Vale do Ribeira-SP

The Vale do Ribeira, SP, main agricultural activity is the banana crop, which accounts for most of this fruit production in the State of São Paulo. The nutritional balance of the plant is one of the most important factors for the banana plant can complete the cycle and achieve high productivity. Aiming to evaluate the seasonal variation of leaf nutrient concentration in banana plants in Vale do Ribeira-SP, we used the results of 252 chemical analyses of plant tissue, collected from August 2009 to September 2010, in the 18 representative properties for the region, ten cultivated with subgroup Cavendish banana plant and eight of subgroup Prata banana plant. The largest variation between the macronutrient occurred for K and S, and among the micronutrients, especially for Fe and B. In some dates of evaluation, there was a higher leaf concentration of P, K, Ca and Zn, in subgroup Cavendish banana plants, while the subgroup Prata banana plants showed higher leaf concentration, especially of Mn, B and N. Climatic conditions, especially rain, influenced the leaf nutrient content, especially for K, N, S, B and Fe.

Adição de cascalho de perfuração da bacia potiguar em argilas para uso em materiais cerâmicos: influência da concentração e temperatura de queima.

One of waste produced on large scale during the well drilling is the gravel drilling. There are techniques for the treatment of the same, but there isn t consensus on what are the best in terms of economic and environmental. One alternative for disposal of this waste and objective of this paper is the incorporation and immobilization of gravel clay matrix to assess their technological properties. The Raw Materials used were characterized by the following techniques: Chemical Analysis by X-ray fluorescence (XRF), mineralogical analysis by X-ray Diffraction (XRD), Grain Size Analysis (FA) and Thermal Analysis by Thermogravimetry (TG) and thermodiferential (DTA). After characterizing, samples were formulated in the following percentages: 0, 5, 10, 15, 25, 50, 75, 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered at temperatures of 850, 950 and 1050 ° C. After sintering, samples were tested for water absorption, linear shrinkage, flexural strength, porosity, density, XRD and test color. The results concluded that the incorporation of gravel drilling is a viable possibility for solid masonry bricks and ceramic blocks manufacture at concentrations and firing temperature described here. Residue incorporation reduces an environmental problem, the cost of raw materials for manufacture of ceramic products

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Experiência de agricultura sem queima, no âmbito do Projeto Ajuri Agroflorestal, Manaus - AM.

As tecnologias que adotam a eliminação do uso do fogo para a remoção da vegetação no preparo da área agrícola são as principais demandas de conhecimento dos agricultores e gestores preocupados com as questões ambientais e de conservação do solo. Objetiva o presente trabalho relatar as ações de troca de experiências, de conhecimentos científicos e populares, sobre manejos agroecológicos dos recursos naturais, com destaque para a prática da agricultura sem queima. As atividades foram realizadas durante dois anos do projeto Ajuri Agroflorestal, com a participação das populações das comunidades do Projeto de Assentamento Tarumã Mirim (PATM). A experiência foi encerrada com a realização da grande oficina denominada: "Museu Vivo: Agricultura sem Queima", com a exposição da construção e manutenção da fertilidade dos solos, em quatro unidades de referências, implantadas na área dos agricultores familiares, que ocorreu durante a XII Semana Nacional de Ciência e Tecnologia, em outubro de 2014.

Avaliação econômica do sistema de produção de mudas de seringueira (Hevea brasiliensis) com copas enxertadas resistentes ao Mal-das-Folhas.

O objetivo deste trabalho foi avaliar o custo unitário da produção de mudas de seringueira tricomposta, como possibilidade de diversificação de cultura e geração de renda entre os agricultores.

Períodos de secagem de folhas de Lippia alba no teor de óleo essencial.

O objetivo deste trabalho foi avaliar a influência do período de secagem de folhas de Lippia alba no teor de óleo essencial.

Uma ferramenta semiautomática para medição da área de lesões de Mancha Alvo em folhas de café.

Este documento apresenta uma ferramenta semiautomática que requer apenas algumas poucas interações com o usuário para medir lesões associadas com a doença mancha-alvo em folhas de café.

Caracterização de novas cultivares de copa de seringueira resistentes ao Mal-das-Folhas.

O presente trabalho teve por objetivo proceder à caracterização de cinco novas cultivares de copa de seringueira resistentes ao mal-das-folhas para registro e proteção junto ao Ministério da Agricultura Pecuária de Abastecimento (Mapa) no período de 2014 a 2015.

Folhas de Sacha-inchi na nutrição de juvenis de tambaqui.

O objetivo desta pesquisa foi avaliar níveis de inclusão das folhas de sacha-inchi na nutrição de juvenis de tambaqui.

Teores de macronutrientes em folhas de gravioleiras.

Neste trabalho analisou-se os teores de N, P, K, Ca e Mg em folhas de sete genotipos de gravioleiras: Blanca, Lisa, Morada, Graviola B, FAO ll e plantas da matriz 415 da coleção do CPATU, com um ano de idade, cultivadas em latossolo amarelo areno-argiloso, em área de cerrado do Amapá. Coletaram-se as amostras retirando-se folhas adultas nos quatro pontos cardeais. Analisando-se os dados, pode-se concluir que:1) não houve diferença significativa para N, P, K e Mg:2) o teor de Ca foi significativamente superior no genotipo Graviola B em relação a Morada, Blanca e FAO ll:3) os teores encontrados não indicam deficiência para a espécie: e 4) em ordem decrescente, encontrou-se a seguinte distribuição dos elementos: N, K, Ca, Mg e P.