993 resultados para pressão intraocular


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Neste trabalho investigou-se a modificação de superfície do titânio pela irradiação com feixe de Laser Nd:YAG. Os parâmetros do laser como a potência, o comprimento de onda, a frequência, a velocidade de varredura e a área de exposição foram mantidos constantes, exceto o espaçamento da matriz, o qual foi de 0,01 e 0,02 mm. A caracterização da superfície foi realizada por Microscopia Eletrônica de Varredura (MEV) e Difração de Raios X (DRX), sendo que os espectros foram refinados pelo método Rietveld. Pela análise de MEV, observou-se uma mudança na topografia, obtendo uma superfície rugosa produzida pelo fenômeno de ablação. As análises por Rietveld dos espectros de difração de raios X detectaram TiN, Ti2N, TiO2 (anatásio e rutilo), sendo que a amostra com espaçamento 0,01 mm apresentou uma maior quantidade de óxidos e nitretos. Isso pode ser devido à sobreposição do feixe, induzindo à formação de uma superfície com maior estabilidade termodinâmica. Os óxidos e nitretos obtidos são de grande importância, pois são responsáveis por produzir uma maior interação entre o osso-implante.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Fisiopatologia em Clínica Médica - FMB

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to investigate the performance of an experimental rainwater treatment system for non-potable uses. Without the first-flush discharge it was expected to control the quality of captured rainwater and to minimize the rainwater by-pass caused by the first-flush strategy. A full-scale direct filtration unit was operated and a solution of natural corn starch was used as the primary coagulant. The color, turbidity e coliform efficiencies of the unit was analyzed based on filtration loads and the net water production was estimated. The results pointed out turbidity removal up to 70.8% and color removal up to 61.0%. The backwash of the filtering system was completed in 3 minutes at the rate of 1,440 m3/m2day with consumption of treated water from 0.5% to 2.2%, based on the potentially harvesting.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Apoio à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Agricultural mechanization improved the efficiency of field operations by providing an increase in crop production. The intensified mechanization, however, has led to higher energy use mainly in the area of fuel consumption. The objective of this study was to compare the fuel consumption of tractors using two different tire pressures for two different types of soil during tillage with irrigated cotton in semi-arid regions. These tests were performed at the Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona with a Case 4x2 TDA 88kW equipped with an autopilot system. The results showed lower fuel consumption using a tire pressure of 124 kPa on sandy clay loan soil.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Currently, the efficiency in field operations and the increased productivity of crops is only possible with the use of agricultural machinery and equipment. This intensification of mechanized activities in agriculture, however, led to higher energy costs on farms mainly in the fuel consumption of agricultural tractors. The objective was to compare the fuel consumption of a tractor on tillage operations for irrigated cotton in semi-arid region varying two tire inflation pressures. The tests were conducted in Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona using a 4x2 TDA Case tractor equipped with a 88kw autopilot system. The results showed lower values in the hourly fuel consumption by using the minimum tire inflation pressure of 124 kPa for all tillage equipment used.