Development of Non-Petroleum Based Binders for Use in Flexible Pavements, TR-594, 2010

Most bituminous adhesives or binders that are used for pavement materials are derived primarily from fossil fuels. With petroleum oil reserves becoming depleted and the drive to establish a bio-based economy, there is a push to produce binders from alternative sources, particularly from biorenewable resources. However, until now, no research has studied the applicability of utilizing bio-oils as a bitumen replacement (100% replacement) in the pavement industry. The main objective of this research was to test various properties of bio-oils in order to determine the applicability of using bio-oils as binders in the pavement industry. The overall conclusions about the applicability of using bio-oils as bio-binders in the pavement industry can be summarized as follows: 1. Bio-oils cannot be used as bio-binders/pavement materials without any heat pre-treatment/upgrading procedure. 2. Current testing standards and specifications, especially Superpave procedures, should be modified to comply with the properties of bio-binders. 3. The temperature range of the viscous behavior for bio-oils may be lower than that of bitumen binders by about 30°–40° C. 4. The rheological properties of the unmodified bio-binders vary in comparison to bitumen binders, but the rheological properties of these modified bio-binders change significantly upon adding polymer modifiers. 5. The high-temperature performance grade for the developed bio-binders may not vary significantly from that of the bitumen binders, but the low-temperature performance grade may vary significantly

O6-Methylguanine-DNA methyltransferase protein expression by immunohistochemistry in brain and non-brain systemic tumours: systematic review and meta-analysis of correlation with methylation-specific polymerase chain reaction

Background: The DNA repair protein O6-Methylguanine-DNA methyltransferase (MGMT) confers resistance to alkylating agents. Several methods have been applied to its analysis, with methylation-specific polymerase chain reaction (MSP) the most commonly used for promoter methylation study, while immunohistochemistry (IHC) has become the most frequently used for the detection of MGMT protein expression. Agreement on the best and most reliable technique for evaluating MGMT status remains unsettled. The aim of this study was to perform a systematic review and meta-analysis of the correlation between IHC and MSP. Methods A computer-aided search of MEDLINE (1950-October 2009), EBSCO (1966-October 2009) and EMBASE (1974-October 2009) was performed for relevant publications. Studies meeting inclusion criteria were those comparing MGMT protein expression by IHC with MGMT promoter methylation by MSP in the same cohort of patients. Methodological quality was assessed by using the QUADAS and STARD instruments. Previously published guidelines were followed for meta-analysis performance. Results Of 254 studies identified as eligible for full-text review, 52 (20.5%) met the inclusion criteria. The review showed that results of MGMT protein expression by IHC are not in close agreement with those obtained with MSP. Moreover, type of tumour (primary brain tumour vs others) was an independent covariate of accuracy estimates in the meta-regression analysis beyond the cut-off value. Conclusions Protein expression assessed by IHC alone fails to reflect the promoter methylation status of MGMT. Thus, in attempts at clinical diagnosis the two methods seem to select different groups of patients and should not be used interchangeably.

Sistema de notificación y consulta de alertas de Dynamics AX2012 para aplicación en Windows Phone mediante protocolo push

Aplicación de Windows Phone que recibe notificaciones push mediante el servicio de Microsoft Push Notification Service cada vez que se genera una alerta en el ERP Dynamics AX 2012, una vez se recibe la notificación, la aplicación puede consultar la información de la alerta mediante un servicio web y gestionarla al igual que se hace en Dynamics AX 2012.

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

A Study of African American Vernacular English in Three Novels and Colloquial Finnish in their Translations – The Dark Tower II: The Drawing of the Three, A Time to Kill and Push

Pro gradu -tutkielma käsittelee afroamerikkalaisen puhekielen (African American Vernacular English, AAVE) käyttöä kolmen englanninkielisen romaanin dialogissa ja suomen yleispuhekielen käyttöä romaanien käännöksissä. Tutkimus on pääasiassa kvantitatiivinen ja deskriptiivinen. Romaanit ovat Stephen Kingin The Dark Tower II: The Drawing of the Three (1987) (Musta torni 2, Kolme korttia pakasta 2005, suom. Kari Salminen), John Grishamin A Time to Kill (1989) (On aika tappaa 1994, suom. Kimmo Linkama) ja Sapphiren Push (1996) (Precious – harlemilaistytön tarina 2010, suom. Kristiina Drews). Alkukielisten romaanien osalta Grisham ja Sapphire suosivat lauseopillisia kielenpiirteitä, kun taas King on suosinut äänteellisiä. Sen sijaan käännöksissä piirteistä yleisimpiä ovat äänteelliset ja harvinaisimpia lauseopilliset. Vaikka käännöksissä sanastolliset piirteet ovat taajaan esiintyviä, äänteellisiä piirteitä esiintyy niitä enemmän. Poikkeuksena on On aika tappaa, jossa sanastollisia piirteitä esiintyy enemmän kuin äänteellisiä. Tulos eroaa Sampo Nevalaisen vuonna 2003 tekemästä tutkimuksesta, jossa hän sai selville, että käännöksissä käytetyt piirteet olivat enimmäkseen sanastollisia, kun taas alun perin suomeksi kirjoitetussa kaunokirjallisuudessa puhekielisyyden vaikutelma saatiin aikaan pääasiassa äänteellisin keinoin. Mahdollinen selitys tässä tutkimuksessa havaitulle erolle on se, että kahdessa romaanissa esiintyvä leimallinen AAVEn käyttö on saanut kääntäjät käyttämään samanlaisia strategioita kuin suomalaiset kirjailijat murretta kirjoittaessaan.

Crawling up the value chain: domestic institutions and non-traditional foreign direct investment in Brazil, 1990-2010

Brazil attracted relatively little innovation-intensive and export-oriented foreign investment during the liberalization period of 1990 to 2010, especially compared with competitors such as China and India. Adopting an institutionalist perspective, I argue that multinational firm investment profiles can be partly explained by the characteristics of investment promotion policies and bureaucracies charged with their implementation. Brazil's FDI policies were passive and non-discriminating in the second half of the 1990s, but became more selective under Lula. Investment promotion efforts have often been undercut by weakly coordinated and inconsistent institutions. The paper highlights the need for active, discriminating investment promotion policies if benefits from non-traditional FDI are to be realized.

[3/10/20, démonstration de push-ball au stade Elisabeth, 12e fête athlétique de Fémina-Sports] : [photographie de presse] / [Agence Rol]

Référence bibliographique : Rol, 61307

Barriers of evidence based policy making in iran's health system

La formation des sociétés fondées sur la connaissance, le progrès de la technologie de communications et un meilleur échange d'informations au niveau mondial permet une meilleure utilisation des connaissances produites lors des décisions prises dans le système de santé. Dans des pays en voie de développement, quelques études sont menées sur des obstacles qui empêchent la prise des décisions fondées sur des preuves (PDFDP) alors que des études similaires dans le monde développé sont vraiment rares. L'Iran est le pays qui a connu la plus forte croissance dans les publications scientifiques au cours de ces dernières années, mais la question qui se pose est la suivante : quels sont les obstacles qui empêchent l'utilisation de ces connaissances de même que celle des données mondiales? Cette étude embrasse trois articles consécutifs. Le but du premier article a été de trouver un modèle pour évaluer l'état de l'utilisation des connaissances dans ces circonstances en Iran à l’aide d'un examen vaste et systématique des sources suivie par une étude qualitative basée sur la méthode de la Grounded Theory. Ensuite au cours du deuxième et troisième article, les obstacles aux décisions fondées sur des preuves en Iran, sont étudiés en interrogeant les directeurs, les décideurs du secteur de la santé et les chercheurs qui travaillent à produire des preuves scientifiques pour la PDFDP en Iran. Après avoir examiné les modèles disponibles existants et la réalisation d'une étude qualitative, le premier article est sorti sous le titre de «Conception d'un modèle d'application des connaissances». Ce premier article sert de cadre pour les deux autres articles qui évaluent les obstacles à «pull» et «push» pour des PDFDP dans le pays. En Iran, en tant que pays en développement, les problèmes se situent dans toutes les étapes du processus de production, de partage et d’utilisation de la preuve dans la prise de décision du système de santé. Les obstacles qui existent à la prise de décision fondée sur des preuves sont divers et cela aux différents niveaux; les solutions multi-dimensionnelles sont nécessaires pour renforcer l'impact de preuves scientifiques sur les prises de décision. Ces solutions devraient entraîner des changements dans la culture et le milieu de la prise de décision afin de valoriser la prise de décisions fondées sur des preuves. Les critères de sélection des gestionnaires et leur nomination inappropriée ainsi que leurs remplaçants rapides et les différences de paiement dans les secteurs public et privé peuvent affaiblir la PDFDP de deux façons : d’une part en influant sur la motivation des décideurs et d'autre part en détruisant la continuité du programme. De même, tandis que la sélection et le remplacement des chercheurs n'est pas comme ceux des gestionnaires, il n'y a aucun critère pour encourager ces deux groupes à soutenir le processus décisionnel fondés sur des preuves dans le secteur de la santé et les changements ultérieurs. La sélection et la promotion des décideurs politiques devraient être basées sur leur performance en matière de la PDFDP et les efforts des universitaires doivent être comptés lors de leurs promotions personnelles et celles du rang de leur institution. Les attitudes et les capacités des décideurs et des chercheurs devraient être encouragés en leur donnant assez de pouvoir et d’habiliter dans les différentes étapes du cycle de décision. Cette étude a révélé que les gestionnaires n'ont pas suffisamment accès à la fois aux preuves nationales et internationales. Réduire l’écart qui sépare les chercheurs des décideurs est une étape cruciale qui doit être réalisée en favorisant la communication réciproque. Cette question est très importante étant donné que l'utilisation des connaissances ne peut être renforcée que par l'étroite collaboration entre les décideurs politiques et le secteur de la recherche. Dans ce but des programmes à long terme doivent être conçus ; la création des réseaux de chercheurs et de décideurs pour le choix du sujet de recherche, le classement des priorités, et le fait de renforcer la confiance réciproque entre les chercheurs et les décideurs politiques semblent être efficace.

Global Value Chain Linkages of Manufacturing Export Firms: A Study of The Kannur Home Textile Industry

The literature on the involvement of developing countries in trade has focused on the effects of different aspects of globalization on firms, regions and countries. The study attempts to examine how an export based industry, locallyembedded and originated on the basis of regional strengths has been inserted into the global trade framework. Though the unit of analysis is the manufacturing export firm in the region of Kannur, it represents the entire home textile export industry from the state of Kerala, as close to 90% of fabric exports in home furnishing material, textiles for upholstery and decoration and stitched or fused, and branded made ups are from the region. From a global perspective, how developing countries face newer trade restrictions and overcome non quota barriers by firm and region specific activities within a value chain framework is a major research area, which has already contributions from the Ludhiana woolen cluster (Tewari,1999 ) and the Tirupur cluster in India (Cawthorne, 1995). The study contributes to the value chain literature by examining the governance and upgrading as well as how firms benefit from linkages. India has a number of export oriented agglomerations or regions where firms have been serving export markets for many years. In many cases it is no longer the supply side policy actions that determine how they are able to penetrate new markets or expand existing market share. Based on this study it becomes possible to understand how the global value chain operates in these different industries to examine whether there is a danger of immiserisation of growth or low road growth

Revisión sistemática de la literatura: efecto de los rellenos inyectables en la región periorbitaria

Introducción: El conocimiento actual de la fisiopatología del envejecimiento periorbitario justifica la aplicación de materiales de relleno inyectables, dado que se enfocan en la restauración del volumen perdido en esta zona, convirtiéndose en una excelente alternativa a procedimientos quirúrgicos que remueven el tejido excedente. Sin embargo los efectos y la seguridad de esta naciente tendencia terapéutica aún no se sustentan en una sólida base científica. El objetivo de esta revisión es identificar el material de relleno inyectable más adecuado para el manejo de los defectos volumétricos estéticos de la región periorbitaria. Metodología: Se realizó una búsqueda exhaustiva de los artículos indexados publicados del 1º de enero de 2.000 al 30 de septiembre de 2.013, en diversas bases de datos electrónicas, se seleccionaron catorce publicaciones, se extrajo la información referente a datos demográficos, la intervención, el seguimiento y los desenlaces y se realizó un análisis de 14 estudios que cumplieron los criterios. Resultados: Todos los artículos incluidos poseían un bajo nivel de evidencia y del grado de recomendación. Todos los materiales de relleno se asociaron a altos niveles de satisfacción para el paciente, adecuada mejoría de la apariencia estética y similares efectos colaterales, el ácido hialurónico fue el material de relleno inyectable más utilizado en la región periorbitaria. Discusión: Los materiales de relleno inyectable mejoran los defectos volumétricos estéticos de la región periorbitaria pero es necesaria mayor evidencia para determinar el tipo relleno más apropiado para esta condición.

Incremento de la salud financiera mediante la utilización de la relación estratégica comunitaria y marketing.

Debido a las crisis mundiales, la perdurabilidad empresarial se ha convertido en la primera preocupación de las organizaciones, puesto que los problemas económicos en otros países pueden generar un efecto negativo en las condiciones del mercado doméstico, que junto con el entorno empresarial complejo y dinámico en el que se deben desempeñar las empresas hoy en día gracias a la globalización, sumado al aumento en la competitividad nacional e internacional, la perdurabilidad de las empresas se está viendo seriamente comprometida. Lo anterior, ha llevado a las empresas a buscar nuevas formas de mejorar su salud financiera. Para medir la salud financiera empresarial, se pueden usar distintos indicadores como lo es el flujo de caja que está asociado con la rentabilidad, el patrimonio que está asociado a las dificultades financieras, entre otros, o a través de varios modelos de bancarrota, los cuales, por medio de un conjunto de ratios financieros, reflejan el estado actual de la organización y su probabilidad de fracaso en el futuro. Las estrategias comunitarias y el marketing permiten incrementar la salud financiera de las empresas a través de la orientación al cliente y el establecimiento de relaciones gana-gana a largo plazo con las diferentes comunidades con las que se relaciona la organización.

Advances in upper limb stroke rehabilitation: a technology push

Strokes affect thousands of people worldwide leaving sufferers with severe disabilities affecting their daily activities. In recent years, new rehabilitation techniques have emerged such as constraint-induced therapy, biofeedback therapy and robot-aided therapy. In particular, robotic techniques allow precise recording of movements and application of forces to the affected limb, making it a valuable tool for motor rehabilitation. In addition, robot-aided therapy can utilise visual cues conveyed on a computer screen to convert repetitive movement practice into an engaging task such as a game. Visual cues can also be used to control the information sent to the patient about exercise performance and to potentially address psychosomatic variables influencing therapy. This paper overviews the current state-of-the-art on upper limb robot-mediated therapy with a focal point on the technical requirements of robotic therapy devices leading to the development of upper limb rehabilitation techniques that facilitate reach-to-touch, fine motor control, whole-arm movements and promote rehabilitation beyond hospital stay. The reviewed literature suggest that while there is evidence supporting the use of this technology to reduce functional impairment, besides the technological push, the challenge ahead lies on provision of effective assessment of outcome and modalities that have a stronger impact transferring functional gains into functional independence.

Crystallization of random aromatic copolyesters containing flexible spacer chains and side-groups

The crystallization behaviour of a series of random copolymers of varying chemical composition is reported. For polymers containing a high proportion of alternating rigid aromatic units and flexible spacers, conventional liquid crystalline and crystalline phase behaviour is observed. The introduction of a substantial fraction of a second shorter rigid unit containing side-chains leads to a broad endotherm in the d.s.c. scan covering some 150°C. Subsequent isothermal crystallization at any point within the broad endotherm leads to the generation of sharp endotherms at temperatures just above the recrystallization temperature. We attribute this behaviour to the crystallization of clusters of molecules containing similar random sequences. Such crystals are non-periodic along the chain direction.

Modeling image motion in airborne Three-Line-Array (TLA) push-broom cameras

This paper presents an image motion model for airborne three-line-array (TLA) push-broom cameras. Both aircraft velocity and attitude instability are taken into account in modeling image motion. Effects of aircraft pitch, roll, and yaw on image motion are analyzed based on geometric relations in designated coordinate systems. The image motion is mathematically modeled by image motion velocity multiplied by exposure time. Quantitative analysis to image motion velocity is then conducted in simulation experiments. The results have shown that image motion caused by aircraft velocity is space invariant while image motion caused by aircraft attitude instability is more complicated. Pitch,roll and yaw all contribute to image motion to different extents. Pitch dominates the along-track image motion and both roll and yaw greatly contribute to the cross-track image motion. These results provide a valuable base for image motion compensation to ensure high accuracy imagery in aerial photogrammetry.

Evaluation of positioning error-induced pixel shifts on satellite linear push-broom imagery

Georeferencing is one of the major tasks of satellite-borne remote sensing. Compared to traditional indirect methods, direct georeferencing through a Global Positioning System/inertial navigation system requires fewer and simpler steps to obtain exterior orientation parameters of remotely sensed images. However, the pixel shift caused by geographic positioning error, which is generally derived from boresight angle as well as terrain topography variation, can have a great impact on the precision of georeferencing. The distribution of pixel shifts introduced by the positioning error on a satellite linear push-broom image is quantitatively analyzed. We use the variation of the object space coordinate to simulate different kinds of positioning errors and terrain topography. Then a total differential method was applied to establish a rigorous sensor model in order to mathematically obtain the relationship between pixel shift and positioning error. Finally, two simulation experiments are conducted using the imaging parameters of Chang’ E-1 satellite to evaluate two different kinds of positioning errors. The experimental results have shown that with the experimental parameters, the maximum pixel shift could reach 1.74 pixels. The proposed approach can be extended to a generic application for imaging error modeling in remote sensing with terrain variation.