Efeitos da atividade física sobre equilíbrio, risco de quedas e função cognitiva de idosos com demência de Alzheimer: Salma Stéphany Soleman Hernandez. -

The Alzheimer’s dementia represents a clinical condition inherent to many chronic and neurodegenerative diseases that are usually related to a decline in the cognitive and physical functions. The objective of this experimental design research was to analyze the effects of a regular and systemized physical activity program over the cognitive functions, balance and risk of falls of elderly with Alzheimer’s Dementia (DA). The sample was made of 16 elderly with DA, distributed in two groups: a) intervention group – GI (9 subjects that had participated in a program of physical activity, that consisted of 3 weekly sessions of 60 minutes each, in alternated days and with a duration of 6 months); b) control group – GC (7 subjects that did not participate in the program of physical activity). Both groups maintained the doctoral and pharmacological assistance routine. The subjects passed through two different evaluations (pre and post-intervention) the questionnaire (Mini-exam of Mental State for cognitive functions) and motor tests (Berg Functional Balance Scale – EEFB, Timed Up-and-Go (TUG) time (TUGs) and steps (TUGp) and the test of agility and dynamic balance (AGILEQ) of the American Alliance for Health, Physical Education Recreation and Dance for elderly). The obtained results were, respectively in the pre and post-intervention moments: a) AGILEQ (GI = 39,1 ± 10,2 and 38,4 ± 8,9 and GC = 45,6 ± 16,7 and 59,9 ± 22,0 seconds) with the statistically interaction significant (ANOVA two-way; F1,14 = 32,07; p=0,01) between groups and moments; b) TUGs (GI = 9,8 ± 2,5 and 9,5 ± 3,3 and GC = 10,6 ± 4,5 and 12,7 ± 7,3 seconds) the test UMann Whitney did not appoint any significant differences between the groups in the post-intervention moment, however the analyzes of Wilcoxon evidenced a ...(Complete abstract click electronic access below)

Structural and functional characterization of barium zirconium titanate/epoxy composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical and chemical matrix effects in soil carbon quantification using laser-induced breakdown spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da força, estresse muscular e marcadores inflamatórios de indivíduos com doença pulmonar obstrutiva crônica submetidos a treinamento resistido com tubos elásticos

Pós-graduação em Fisioterapia - FCT

Microstructural, physical, and fluid dynamic assessment of spinel-based and phosphate-bonded investments for dental applications

This work reports the experimental evaluation of physical and gas permeation parameters of four spinel-based investments developed with or without inclusion of sacrificial fillers. Data were compared with those of three commercial formulations. Airflow tests were conducted from 27 to 546°C, and permeability coefficients were fitted from Forchheimer's equation. Skeletal densities found for spinel- (ρs = 3635 ± 165 kg/m3) and phosphate-bonded (ρs = 2686 ± 11 kg/m3) samples were in agreement with the literature. The developed investments were more porous and less permeable than commercial brands, and the differences were ascribed to the different pore morphologies and hydraulic pore sizes of ceramic matrices. The inclusion of both fibers and microbeads resulted in increases of total porosity (42.6–56.6%) and of Darcian permeability coefficient k1 (0.76 × 10−14–7.03 × 10−14 m2). Air permeation was hindered by increasing flow temperatures, and the effect was related to the influence of gas viscosity on ΔP, in accordance with Darcy's law. Casting quality with molten titanium (CP Ti) was directly proportional to the permeability level of the spinel-based investments. However, the high reactivity of the silica-based investment RP and the formation of α-case during casting hindered the benefits of the highest permeability level of this commercial brand.

Influence of the addition of calcium hydroxide powder on some physical and chemical properties of the sealer MTA fillapex

Objective: This study evaluated the flow, pH and calcium release of MTA Fillapex (G1) or Fillapex plus 10% in weight of calcium hydroxide powder (G2), compared to AH Plus (G3) and Sealapex (G4). Materials and methods:The flow test was performed according to ISO 6876:2001 requirements. The sealers were placed into plastic tubes and immersed in deionized water. After 24 hours, 7, 14 and 28 days, the water of each tube was removed and tested to evaluate the pH values and the level of released calcium. Calcium release values were analyzed statistically by Kruskal Wallis and Dunn tests and pH values analyzed by ANOVA and Tukey tests (? = 5%). Results:G1 presented higher flow among all sealers. The addition of 10% calcium hydroxide into MTA Fillapex reduced the flow (p < 0.05) but, in a level, that is lower than the one recommended for ISO norms. G2 and G4 presented pH values and calcium release higher than G3 (p < 0.05) in all periods. G1 presented pH value higher than G3 (p < 0.05), except in 7 days period (p > 0.05). G4 presented higher pH values than G1 and G2, but the calcium release was similar for all periods (p > 0.05). G3 presented lower calcium release among all groups (p < 0.05). Conclusion: The addition of 10% calcium hydroxide in MTA Fillapex caused reduction in flow and no negative interference in pH and/or calcium release. However, the obtained flow is different from ISO requirements. Clinical relevance: MTA Fillapex presents levels of flow above the ISO norms. The addition of calcium hydroxide is a suggestion for solving this problem, but the impact of these procedures should be carefully evaluated.

Addition of Chlorhexidine Gluconate to a Glass Ionomer Cement: A Study on Mechanical, Physical and Antibacterial Properties

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Envelhecimento ativo de professores de um programa de atividades físicas da UnATI/ESALQ/USP

Pós-graduação em Ciências da Motricidade - IBRC

Should phylogenetic and functional diversity metrics compose macroinvertebrate multimetric indices for stream biomonitoring?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aloe vera bathing improved physical and humoral protection in breeding stock after induced spawning in matrinxa (Brycon amazonicus)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biology and reproductive capacity of Spodoptera eridania (Cramer) (Lepidoptera, Noctuidae) in different soybean cultivars

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Colleters on the inflorescence axis of croton glandulosus (euphorbiaceae): structural and functional characterization

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological characterization by SEM, TEM and AFM of nanoparticles and functional nanocomposites based on natural rubber filled with oxide nanopowders

Nanocomposites were prepared from mixture of different concentrations of ferroelectric nanoparticles in an elastomeric matrix based on the vulcanized natural rubber. The morphological characterization of nanocomposites was carried out using Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Atomic force microscopy (AFM). The nanocrystalline ferroelectric oxide is potassium strontium niobate (KSN) with stoichiometry KSr2Nb5O15, and was synthesized by the chemical route using a modified polyol method, obtaining particle size and microstrain equal to 20 nm and 0.32, respectively. These ferroelectric nanoparticles were added into the natural rubber in concentrations equal to 1, 3, 5, 10, 20 and 50 phr (parts per hundred of rubber) forming ferroelectric nanocomposites (NR/KSN). Using morphological characterization, we identified the maximum value of surface roughness at low concentrations, in particular, sample with 3 phr of nanoparticles and factors such as encapsulation and uniformity in the distribution of nanoparticles into the natural rubber matrix are investigated and discussed.

Soil physical and microbiological attributes cultivated with the common bean under two management systems

Agricultural management systems can alter the physical and biological soil quality, interfering with crop development. The objective of this study was to evaluate the physical and microbiological attributes of a Red Latosol, and its relationship to the biometric parameters of the common bean (Phaseolus vulgaris), irrigated and grown under two management systems (conventional tillage and direct seeding), in Campinas in the state of Sao Paulo, Brazil. The experimental design was of randomised blocks, with a split-plot arrangement for the management system and soil depth, analysed during the 2006/7 and 2007/8 harvest seasons, with 4 replications. The soil physical and microbiological attributes were evaluated at depths of 0.00-0.05, 0.05-0.10, 0.10-0.20 and 0.20-0.40 m. The following were determined for the crop: density, number of pods per plant, number of beans per pod, thousand seed weight, total weight of the shoots and harvest index. Direct seeding resulted in a lower soil physical quality at a depth of 0.00-0.05 m compared to conventional tillage, while the opposite occurred at a depth of 0.05-0.10 m. The direct seeding showed higher soil biological quality, mainly indicated by the microbial biomass nitrogen, basal respiration and metabolic quotient. The biometric parameters in the bean were higher under the direct seeding compared to conventional tillage.