Chromosome aberration and micronucleus frequencies in Allium cepa cells exposed to petroleum polluted water - A case study

In the present study, we applied Chromosome Aberration (CA) and Micronucleus (MN) tests to Allium cepa root cells, in order to evaluate the water quality of Guaeca river. This river, located in the city of Sao Sebastiao, SP, Brazil, had been affected by an oil pipeline leak. Chemical analyses of Total Petroleum Hydrocarbons (TPHs) and Polycyclic Aromatic Hydrocarbons (PAHs) were also carried out in water samples, collected in July 2005 (dry season) and February 2006 (rainy season) in 4 different river sites. The largest CA and MN incidence in the meristematic cells of A. cepa was observed after exposure to water sample collected during the dry season, at the spring of the river, where the oil leak has arisen. The F, cells from roots exposed to such sample (non-merismatic region) were also analyzed for the incidence of MN, showing a larger frequency of irregularities, indicating a possible development of CA into MN. Lastly, our study reveals a direct correlation between water chemical analyses (contamination by TPHs and PAHs) and both genotoxic and mutagenic effects observed in exposed A. cepa cells. (C) 2007 Elsevier B.V. All rights reserved.

Shell beds as paleoecological puzzles: A case study from the Upper Permian of the Parana Basin, Brazil

Microstratigraphic, sedimentological, and taphonomic features of the Ferraz Shell Bed, from the Upper Permian (Kazanian-Tatarian?) Corumbatai Formation of Rio Claro Region (the Parana Basin, Brazil), indicate that the bed consists of four distinct microstratigraphic units. They include, from bottom to top, a lag concentration (Unit 1), a partly reworked storm deposit (Unit 2), a rapidly deposited sandstone unit with three thin horizons recording episodes of reworking (Unit 3), and a shell-rich horizon generated by reworking/winnowing that was subsequently buried by storm-induced obrution deposit (Unit 4). The bioclasts of the Ferraz Shell Bed represent exclusively bivalve mollusks. Pinzonella illusa and Terraia aequilateralis are the dominant species. Taphonomic analysis indicates that mollusks are heavily time-averaged (except for some parts of Unit 3). Moreover, different species are time-averaged to a different degree (disharmonious time-averaging). The units differ statistically from one another in their taxonomic and ecological composition, in their taphonomic pattern, and in the size-frequency distributions of the two most common species. Other Permian shell beds of the Parana Basin are similar to the Ferraz Shell Bed in their faunal composition (they typically contain similar sets of 5 to 10 bivalve species) and in their taphonomic, sedimentologic, and microstratigraphic characteristics. However, rare shell beds that include 2-3 species only and are dominated by articulated shells preserved in life position also occur. Diversity levels in the Permian benthic associations of the Parana Basin were very low, with the point diversity of 2-3 species and with the within-habitat and basin-wide (alpha and gamma) diversities of 10 species, at most. The Parana Basin benthic communities may have thus been analogous to low-diversity bivalve-dominated associations of the present-day Baltic Sea. The 'Ferraz-type' shell beds of the Parana Basin represent genetically complex and highly heterogeneous sources of paleontological data. They are cumulative records of spectra of benthic ecosystems time-averaged over long periods of time (10(2)-10(4) years judging from actualistic research). Detailed biostratinomic reconstructions of shell beds can not only offer useful insights into their depositional histories, but may also allow paleoecologists to optimize their sampling designs, and consequently, refine paleoecological and paleoenvironmental interpretations.

Sampling mobility index: Case study in Assis - Brazil

The objective of this work is to present an index which may synthesize a set of indicators of mobility for medium size cities urban centers. Three great areas were selected to compose the mobility index: pedestrians, motor vehicles and cycling. The Sampling Mobility Index is given by the sum of the punctuation the indicators selected and can to result in 700 points, the best result to mobility, and 0 points, the worse to mobility. The result obtained is given by the Sampling Mobility Index equal to 390. This result indicates a critical situation in Assis, as far as mobility is concerned. (c) 2005 Elsevier Ltd. All rights reserved.

Macrobenthic intertidal communities from wave to tide dominated beach environments. A case study in two Brazilian beaches

Modification showed by intertidal macrofaunal communities between two nearby sites that change from a wave to a tide dominated beach environment, was analyzed on the present study. At each site, eleven intertidal sampling stations were distributed along a transect, from the drift line to the spring low tide water level. Four macrofaunal samples one meter long-shore spaced were collected at, each station with an iron core of 0.05 m(2) surface area, taken to a depth of 20 cm. Major,differences on sediments between sites were the offshore decrease of mean particle size diameter and increase of kurtosis and water content at the tide dominated site. KIDS ordination showed major similarities between the lowest stations of this site, that represents the dissipative low tide-terrace portion of the beach. Two lower station of the wave dominated site presented similarities with this group. The other stations of the tide-dominated site, that represents the reflective high tide beach portion, grouped distant from the former. (canonical Correspondence Analysis (CCA) showed a similar spatial distribution of stations, suggesting the importance of environmental factors on the explanation of species distribution patterns. Sediment water content and water table depth, with the highest inertia value, seems to be the principal physical factor. Increase on water content affects the macrofaunal distribution by the expansion of typical infralitoral species, as was the case of Bathyporeiapus ruffoi, on the dissipative low tide terrace beach portion. A disrupted distribution with the lost of a gradate zonation along a physical gradient is one of the major modification presented by macrobenthic communities on the transition from a wave to a tide dominated beach environment.

A case study of convective organization into precipitating lines in the Southwest Amazon during the WETAMC and TRMM-LBA

A case study of convective development in the Southwest Amazon region during the Wet Season Atmospheric Mesoscale Campaign (WETAMC) and Tropical Rainfall Measuring Mission (TRMM)/Large-Scale Biosphere-Atmosphere (LBA) Experiment in Amazonia is presented. The convective development during 7 February 1999 is shown to occur during a period of very weak large-scale forcing in the presence of topography and deforestation. The available data include dual Doppler radar analysis, radiosonde launches, and surface and boundary layer observations. The observational analysis is complemented with a series of model simulations using the RAMS with 2-km resolution over a 300 km 300 km area forced by a morning radiosonde profile. A comparison of the observed and simulated thermodynamic transformation of the boundary layer and of the formation of convective lines, and of their kinematic and microphysical properties is presented. It is shown that only a few very deep and intense convective cells are necessary to explain the overall precipitating line formation and that discrete propagation and coupling with upper atmosphere circulations may explain the appearance of several lines. The numerical simulation indicates that topography may be the cause of initial convective development, although later on the convective line is parallel to the midlevel shear. There are indications that small-scale deforestation may have an effect on increasing rainfall in the wet season when the large-scale forcing is very weak.

Coastal Marine Mapping as an Ecosystem Based Management - the case study of the Baixada Santista Region - São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Technology assessment for power quality mitigation devices - Micro-DVR case study

This work presents a case study on technology assessment for power quality improvement devices. A system compatibility test protocol for power quality mitigation devices was developed in order to evaluate the functionality of three-phase voltage restoration devices. In order to validate this test protocol, the micro-DVR, a reduced power development platform for DVR (dynamic voltage restorer) devices, was tested and the results are discussed based on voltage disturbances standards. (C) 2011 Elsevier B.V. All rights reserved.

Discharge pulses of hydroelectric dams and their effects in the downstream limnological conditions: A case study in a large tropical river (SE Brazil)

To address daily fluctuations in electricity demands, the quantities of water passing through the turbines of hydropower plants can vary significantly (up to fourfold) during a 24-h cycle. This study evaluates the effects of hourly variations in water discharges on the limnological conditions observed in two below-dam river stretches. The study reservoirs, Capivara and Taquaruçu, are the 9th and 10th reservoirs in a cascade of dams in the Paranapanema River in south-east Brazil. The reservoirs exhibit different trophic conditions, water retention times, thermal regimes and spillway positions. Capivara Reservoir is deeper, meso-eutrophic, with a high water retention time and hypolimnetic discharges (32 m) varying between 500 and 1400 m3 s-1. In contrast, Taquaruçu Reservoir is relatively shallow, oligo-mesotrophic, and has a low retention time, with water discharges varying between 500 and 2000 m3 s-1. Its turbine water intake zone also is more superficial (7 m). For two periods of the year, winter and summer, profiles of limnological measurements were developed in the lacustrine (above-dam site) zones of the reservoirs, as well as in the downstream river stretches (below-dam site). In both cases, the sampling was carried out at 4-h intervals over a complete nictemeral cycle. The results demonstrated that the reservoir operating regime (water discharge variations) promoted significant differences in the conditions of the river below the dams, especially for water velocity, turbidity, and nutrient and suspended solids concentrations. The reservoir physical characteristics, including depth, thermal stratification and outlet structure, are also key factors influencing the limnology and water quality at the below-dam sampling sites. In the case of Capivara Reservoir, for example, the low dissolved oxygen concentration (<5.0 mg L-1) in its bottom water layer was transferred to the downstream river stretches during the summer. These study results demonstrated that it is important to continue such investigations as a means of verifying whether or not these high-amplitude/low-frequency variations could negatively affect the downstream river biota. © 2009 The Authors. Journal compilation © 2009 Blackwell Publishing Asia Pty Ltd.

Operations strategy and supply chain management: A Brazilian case study

The objective of this study is to understand how an assembly company, that is considered a focal company in the chain of Brazilian white goods sector, can influence the supply chain management established with its first tier suppliers. This is an exploratory qualitative study in which the information was gathered through direct observations, documents' retention, and data from interviews held with management-level employees of the sales and product development areas of the focal company and of the production area of the suppliers' companies. This study indicates that the operations strategy of the focal company influences the supply chain management and that the common business processes shared by its suppliers are a way to verify the truth of such statement. The suppliers cooperate closely with the focal company when complementing their business processes and consequently supporting the company to pursue its operations strategy. A set of mechanisms to aid the comprehension of how the operations strategy can affect the business processes and therefore to achieve the result of this research were adopted. © EuroJournals Publishing, Inc. 2012.

First-best technological strategy in an Nth-BEST economic context: a case-study of the evolution of the Acindar steelplant in Rosario, Argentina""

Includes bibliography

Towards a strategic CSR: A Brazilian case study

Purpose - Organisations may be considered, at the same time, either part of the problem or part of the solution for the social-environmental crisis that is occurring. To be part of the solution, they must head for a strategic management of corporate social responsibility (CSR). The objective of the present study is to identify and analyse the interfaces between theoretical models of strategic implementation of CSR and the variables and major players involved in this process. Design/methodology/approach - This is a qualitative research using a case study strategy. The company chosen for this case study has been highlighted as one of the best national companies to work for, with significant social responsibility indices. Findings - The case study found some results, such as the importance of aligning with human resource management for strategic implementation of CSR and the integrative characteristic between different workers, that are essential for this process. Originality/value - Only a few international articles discuss CSR in Brazil. The results could be useful for classes focusing on Doing business in Brazil. © Emerald Group Publishing Limited.

Information on disaster risk management: case study of five countries: Jamaica

Incluye Bibliografía

Large-Scale Water Productivity Assessments with MODIS Images in a Changing Semi-Arid Environment: A Brazilian Case Study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Plant iononne diagnosis using sound balances: case study with mango (Mangifera Indica)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A Fuzzy Goal Programming model for solving aggregate production-planning problems under uncertainty: A case study in a Brazilian sugar mill

This paper proposes a Fuzzy Goal Programming model (FGP) for a real aggregate production-planning problem. To do so, an application was made in a Brazilian Sugar and Ethanol Milling Company. The FGP Model depicts the comprehensive production process of sugar, ethanol, molasses and derivatives, and considers the uncertainties involved in ethanol and sugar production. Decision-makings, related to the agricultural and logistics phases, were considered on a weekly-basis planning horizon to include the whole harvesting season and the periods between harvests. The research has provided interesting results about decisions in the agricultural stages of cutting, loading and transportation to sugarcane suppliers and, especially, in milling decisions, whose choice of production process includes storage and logistics distribution. (C)2014 Elsevier B.V. All rights reserved.