Robust infraestructure design in rapid transit rail systems

Incidents and rolling stock breakdowns are commonplace in rapid transit rail systems and may disrupt the system performance imposing deviations from planned operations. A network design model is proposed for reducing the effect of disruptions less likely to occur. Failure probabilities are considered functions of the amount of services and the rolling stock’s routing on the designed network so that they cannot be calculated a priori but result from the design process itself. A two recourse stochastic programming model is formulated where the failure probabilities are an implicit function of the number of services and routing of the transit lines.

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

O projeto de arquitetura de espaços temporários com o uso de sistema construtivo remontável: um estudo exploratório

The purpose of this research is to study the portable or reassemblable architectures, which, different from conventional architecture (whose designs are of permanent buildings), corresponds to the designing of spaces with temporary purposes. The focus of the study is the architectural design of spaces that are produced from building systems that can to be moved to different places (process of assembly / disassembly / reassembly) in order to identify the types of spaces generated and the processes used in their design / projecting. The aim is to investigate relationships between the initial project conceived based on a Reassemblable Construction System (RCS) and its application in the architectural design of professionals and students in order to contribute to the understanding of the specificities of this type of design activity. To this end it was developed the exploratory research based on multimedia methods, which includes: documentary analysis, technical visits, interviews, surveys, academic exercise and documentation by images. Although the study is not conclusive, the results indicate significant differences between the point of view of the RCS´s designers and its users (architects and architecture students) since the users demonstrated to have some difficulty to access the features provided for the first group, in particular the students. It is also demonstrated that the use of RCSs seems to change the appreciation / hierarchization of the conditions of project design, since, unlike what happens in traditional architectural design, the designers who use them seem to be more concerned with constructive issues, especially the structural elements (support and covering), instead of functionality, aesthetics and even physical characteristics of the site

A influência de decisões arquitetônicas na eficiência energética do Campus vol. 1/UFRN

Building design is an effective way to achieve HVAC energy consumption reduction. However, this potentiality is often neglected by architects due to the lack of references to support design decisions. This works intends to propose architectural design guidelines for energy efficiency and thermal performance of Campus/UFRN buildings. These guidelines are based on computer simulations results using the software DesignBuilder. The definition of simulation models has begun with envelope variables, partially done after a field study of thirteen buildings at UFRN/Campus. This field study indicated some basic envelope patterns that were applied in simulation models. Occupation variables were identified with temperature and energy consumption monitoring procedures and a verification of illumination and equipment power, both developed at the Campus/UFRN administration building. Three simulation models were proposed according to different design phases and decisions. The first model represents early design decisions, simulating the combination of different types of geometry with three levels of envelope thermal performance. The second model, still as a part of early design phase, analyses thermal changes between circulation halls lateral and central and office rooms, as well as the heat fluxes and monthly temperatures in each circulation hall. The third model analyses the influence of middle-design and detail design decisions on energy consumption and thermal performance. In this model, different solutions of roofs, shading devices, walls and external colors were simulated. The results of all simulation models suggest a high influence of thermal loads due to the incidence of solar radiation on windows and surfaces, which highlights the importance of window shading devices, office room orientation and absorptance of roof and walls surfaces

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Design de equipamento médico

Dissertação de Mestrado para obtenção do grau de Mestre em Design de Produto, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Todo Brasileiro merece nível A : habitação multifamiliar para o programa minha casa minha vida energeticamente eficiente

This thesis describes the theoretical, methodological and programmatic proposal for a multifamily residential building located in the urban expansion area of Parnamirim/RN, inserted in the program Minha Casa Minha Vida and level of energy efficiency "A", as the RegulamentoTécnico de Qualidade (RTQ-R/INMETRO) for residential buildings. The development project initially consists of procedures as the study of theoretical, architectural programming and cases studies. With the delimitation of a field solution, situated between the reference and the context, proposals are studied to determine the solution and architectural detailing of the proposal. The architectural program was built based on the method of Problem Seeking (Peña and Parshall, 2001) and research has highlighted aspects of reducing the environmental impact and of the program Minha Casa Minha Vida , among others. The design process was characterized by the incorporation of aspects reviewed and programmed, seeking them compatible and have an economically viable building, socio-spatial quality and energy efficient. The results show that it is possible to obtain a building that meets the constraints of the program that provides housing and energy efficiency level A - and many other environmental qualities and constructive, particularly through architectural design

A organização do processo de projeto de arquitetura no meio profissional: uma análise da produção em escritórios

This paper examines, through case studies, the organization of the production process of architectural projects in architecture offices in the city of Natal, specifically in relation to building projects. The specifics of the design process in architecture, the production of the project in a professional field in Natal, are studied in light of theories of design and its production process. The survey, in its different phases, was conducted between March 2010 and September 2012 and aimed to identify, understand, and analyze comparatively, by mapping the design process, the organization of production of building projects in two offices in Natal, checking as well the relationships of their agents during the process. The project was based on desk research and exploration, adopting, for both, data collection tools such as forms, questionnaires, and interviews. With the specific aim of mapping the design process, we adopted a technique that allows obtaining the information directly from employee agents involved in the production process. The technique consisted of registering information by completing daily, during or at the end of the workday, an individual virtual agenda, in which all agent collaborators described the tasks performed. The data collected allowed for the identification of the organizational structure of the office, its hierarchy, the responsibilities of agents, as well as the tasks performed by them during the two months of monitoring at each office. The research findings were based on analyses of data collected in the two offices and on comparative studies between the results of these analyses. The end result was a diagnostic evaluation that considered the level of organization and elaborated this perspective, as well as proposed solutions aimed at improving both the organization of the process and the relationships between the agents under the lens analyzed

Design Optimization of Modern Machine-drive Systems for Maximum Fault Tolerant and Optimal Operation

Modern electric machine drives, particularly three phase permanent magnet machine drive systems represent an indispensable part of high power density products. Such products include; hybrid electric vehicles, large propulsion systems, and automation products. Reliability and cost of these products are directly related to the reliability and cost of these systems. The compatibility of the electric machine and its drive system for optimal cost and operation has been a large challenge in industrial applications. The main objective of this dissertation is to find a design and control scheme for the best compromise between the reliability and optimality of the electric machine-drive system. The effort presented here is motivated by the need to find new techniques to connect the design and control of electric machines and drive systems. A highly accurate and computationally efficient modeling process was developed to monitor the magnetic, thermal, and electrical aspects of the electric machine in its operational environments. The modeling process was also utilized in the design process in form finite element based optimization process. It was also used in hardware in the loop finite element based optimization process. The modeling process was later employed in the design of a very accurate and highly efficient physics-based customized observers that are required for the fault diagnosis as well the sensorless rotor position estimation. Two test setups with different ratings and topologies were numerically and experimentally tested to verify the effectiveness of the proposed techniques. The modeling process was also employed in the real-time demagnetization control of the machine. Various real-time scenarios were successfully verified. It was shown that this process gives the potential to optimally redefine the assumptions in sizing the permanent magnets of the machine and DC bus voltage of the drive for the worst operating conditions. The mathematical development and stability criteria of the physics-based modeling of the machine, design optimization, and the physics-based fault diagnosis and the physics-based sensorless technique are described in detail. To investigate the performance of the developed design test-bed, software and hardware setups were constructed first. Several topologies of the permanent magnet machine were optimized inside the optimization test-bed. To investigate the performance of the developed sensorless control, a test-bed including a 0.25 (kW) surface mounted permanent magnet synchronous machine example was created. The verification of the proposed technique in a range from medium to very low speed, effectively show the intelligent design capability of the proposed system. Additionally, to investigate the performance of the developed fault diagnosis system, a test-bed including a 0.8 (kW) surface mounted permanent magnet synchronous machine example with trapezoidal back electromotive force was created. The results verify the use of the proposed technique under dynamic eccentricity, DC bus voltage variations, and harmonic loading condition make the system an ideal case for propulsion systems.

The Academic-enterprise experiences framework as a guide for design education

The establishment of support platforms for the development of a new culture in design education, in order to achieve both research exploitation and its results, as an approach to the industrial community, challenges higher education institutions to rethink their functioning, divided between investigation on their own initiative or on demand, and its usefulness / practical application. At the same time, through design education, how can they be the engine that aggregates all these frequently antagonistic interests? Polytechnic institutes are predisposed to collaboration and interdisciplinarity. In our course of Technology and Design of Furniture, the availability of a production unit, testing laboratories, and expertise in engineering, design and marketing, encourage the development of a holistic project. In order to develop such knowledge, we adapt three important ways of thinking in designing interactions influenced by the traditional approach, namely, 1) identifying and understanding a design problem, i.e. a market need, 2) defining the design process and knowing what can be used for design education, i.e. opportunities for design education, and 3) sustainability of this framework and design projects' alignment with education in the same field. We explain our approach by arguing from the academicenterprise experiences perspective. This concept is proposed as a way to achieve those three ways of thinking in design education. Then, a set of interaction attributes is defined to explain how engineering and product design education can enhance meaningful relations with manufacturers, stakeholders and society in general. A final discussion is presented with the implications and benefits of this approach. The results suggest that through academic-enterprise partnerships in design, several goals such as students' motivation, product design innovation and potential for knowledge transfer to industries can be achieved.

A Arquitetura como Processo Social

Desde o decorrer dos séculos que a arquitetura se tem apresentado de diferentes formas perante o seu público. As sucessivas mudanças na mentalidade social foram em consequência provocando alterações no posicionamento do arquiteto na relação com o utilizador, resultando no distanciamento entre ambos. O processo social da arquitetura acabou por sofrer continuas alterações na sua forma de atuar, perdendo o seu caráter de serviço prestado à sociedade, e funcionando como um instrumento de afirmação e demonstração de poder. Através de uma análise da complexidade nas componentes da sociologia e da espacialidade, pretende-se chegar à essência da conceção do espaço e da forma como este organiza e estrutura a sociedade. A questão primordial encontra-se no assumir do utilizador como um elemento primordial para a modelação do espaço, expondo os efeitos da componente participativa na conceção do programa e do projeto. Na presente dissertação tenta-se perceber de que forma a participação na conceção do projeto arquitetónico, pode exponenciar o processo social da arquitetura. Através da análise de três obras internacionais, procura-se compreender de que forma o pensamento arquitetónico e a metodologia de trabalho dos seus autores representam instrumentos importantes para restabelecer a conexão perdida entre o arquiteto e o utilizador. O que se pretende não é obtenção de uma resposta Universal, mas a exposição de um caminho, e dos instrumentos que podem constituir uma importante ferramenta para a afirmação do processo social da arquitetura, dando a origem a um projeto arquitetónico que represente a visão da sua sociedade e responda às suas necessidades. Uma arquitetura estruturada pela sociedade, onde o arquiteto assume não como um criador, mas como um gestor de recursos.

Repensar=Reutilizar. o abandono como oportunidade. Fábrica Robinson: o instante na construção de um tempo provisório

Esta investigação procura mostrar/problematizar programas que questionem a reutilização de lugares, através de uma proposta de projeto provisório de arquitetura, no panorama do Património Industrial, num processo de revitalização. O intuito é procurar modelos/ações que possam responder às transformações, partindo do problema do abandono, dos espaços pós-industriais. O objetivo principal consiste em criar um processo de aproximação à problemática da reutilização cujo processo de elaboração de projeto encontra nas suas formas de produção e operação um discurso que faz a síntese entre prática artística, posição curatorial e arquitetura, na elaboração de um programa para um lugar revitalizando-o. O objeto deste estudo faz parte de uma investigação de pesquisa por projeto e encontra lugar no conjunto arquitetónico da Fábrica Robinson, em Portalegre, cuja apropriação inicial de parte do Convento de S. Francisco dá hoje lugar ao Espaço Robinson. O reconhecimento deste conjunto, como lugar de encontro entre um passado recente e um futuro pendente, marcou a proposta projetual. Proposta de projeto temporário cujo conceito estabelece a viabilidade de apropriação como forma de atuação provisória, subjacente ao ato de reutilizar, criando novos programas de ocupação, promovendo novas ideias e definições de património e assim devolvendo o significado às estruturas industriais vazias. O que preservar e como conservar pode demarcar a importância de salvaguarda deste património e a previsão da sua transmissão para o futuro, fixada pela ideia de preservação. A Fábrica Robinson e a revitalização urbana deste espaço configura, hoje, uma nova oportunidade para estes conjuntos arquitetónicos, e a importância da sua salvaguarda, na valorização do Património Industrial. O trabalho pretende demonstrar a ordem de relação entre programa e lugar no debate interdisciplinar e a hipótese de concretização projetual que preencha um vazio temporalmente suspenso; ABSTRACT: Rethinking = Reuse: The abandonment as opportunity Robinson Factory: The instant in the construction of a provisory time This research aims to show architectural programs that question the reuse of places in the context of industrial heritage, through an architectural design, in a revitalization process. The aim is to look to models / actions that, starting with the abandonment problem, may answer to the post-industrial spaces transformations. The main goal is to create an approximation process to the problem of reuse, whose project design process finds in its production and operations forms a symbiosis between artistic practice, curatioral approach and architecture, in the development of a program to revitalize a place. The object of this study is part of a research project / research by design concerning the architectural complex Fábrica Robinson located in Portalegre, whose original appropriation of part of Convento de S. Francisco is today occupied by Espaço Robinson. The acknowledgment of this complex as a space placed in-between a recent past and a pending future marked the design proposed. A temporary design proposal whose concept establishes the validity of the temporary action, underlying to the act of reuse, creating new occupation programs, promoting new ideas and heritage definitions and thus given back meaning to the empry industrial structures. What to preserve and how to save may mark the importance of safeguarding this heritage and the prediction of its transmission to the future, set by the idea of preservation. The Fábrica Robinson and the urban regeneration of this area sets itself as a new opportunity to safeguard these architectural ensembles and enhance the value of the industrial heritage. This study intend to show the relationship between the program and a vacant place, through a temporary proposal, supported by the interdisciplinary debate and the hypothesis of design implementation that completes a void temporarily suspended.

John Frazer

John Frazer, Professor, trained at the Architectural Association, taught first at Cambridge University and then the AA in the 1970s and again in the '90s. He was Head of School of Design Research History and Criticism at the University of Ulster in the 1980s, he also ran a systems and design consultancy with his wife Julia (including projects for Cedric Price and Walter Segal) and was founder and chairman of Autographics software. He is currently Swire Chair Professor and Head of School of Design in Hong Kong.----- This is a very personal perspective on a concept of universal and future significance. It is personal, both is the sense that it is an unashamedly biased view of both the significance of the project, and the nature of that significance and because the author was personally involved as one of the consultants on GENERATOR and subsequently involved Cedric Price in its educational application at the Architectural Association. GENERATOR is still very much alive and was still developing whilst this chapter was being written.

The generation of virtual prototypes for performance optimization

I am suspicious of tools without a purpose - tools that are not developed in response to a clearly defined problem. Of course tools without a purpose can still be useful. However the development of first generation CAD was seriously impeded because the solution came before the problem. We are in danger of repeating this mistake if we do not clarify the nature of the problem that we are trying to solve with the next generation of tools. Back in the 1980s I used to add a postscript slide at the end of CAD conference presentations and the applause would invariably turn to concern. The slide simple asked: can anyone remember what it was about design that needed aiding before we had computer aided design?

Tangible interfaces to explain Gaudi's use of ruled-surface geometries

This paper summarises the development of a machine-readable model series for explaining Gaudi's use of ruled surface geometry in the Sagrada Familia in Barcelona, Spain. The first part discusses the modeling methods underlying the columns of the cathedral and the techniques required to translate them into built structures. The second part discusses the design and development of a tangible machine-readable model to explain column-modeling methods interactively in educational contexts such as art exhibitions. It is designed to explain the principles underlying the column design by means of physical interaction without using mathematical terms or language.