Effect of PaCO(2) variation on standard base excess value in critically ill patients

Purpose: The aim of this study was to investigate the impact of acute PaCO(2) temporal variation on the standard base excess (SBE) value in critically ill patients. Methods: A total of 265 patients were prospectively observed; 158 were allocated to the modeling group, and 107 were allocated to the validation group. Two models were developed in the modeling group (one including and one excluding PaCO(2) as a variable determinant of SBE), and both were tested in the validation group. Results: In the modeling group, the mathematical model including SIDai, SIG, L-lactate, albumin, phosphate, and PaCO(2) had a predictive superiority in comparison with the model without PaCO(2) (R(2) = 0.978 and 0.916, respectively). In the validation group, the results were confirmed with significant F change statistics (R(2) change = 0.059, P < .001) between the model with and without PaCO(2). A high correlation (R = 0.99, P < .001) and agreement (bias = -0.25 mEq/L, limits of agreement 95% = -0.72 to 0.22 mEq/L) were found between the model-predicted SBE value and the SBE calculated using the Van Slyke equation. Conclusions: Acute PaCO(2), temporal variation is related to SBE changes in critically ill patients. (C) 2009 Elsevier Inc. All rights reserved.

Synthesis, spectroscopic characterization, DFT studies and biological assays of a novel gold(I) complex with 2-mercaptothiazoline

A new gold(I) complex with 2-mercaptothiazoline (MTZ) with the coordination formula [AuCN(C(3)H(5)NS(2))] was synthesized and characterized by chemical and spectroscopic measurements, OFT studies and biological assays. Infrared (IR) and (1)H, (13)C and (15)N nuclear magnetic resonance (NMR) spectroscopic measurements indicate coordination of the ligand to gold(I) through the nitrogen atom. Studies based on OFT confirmed nitrogen coordination to gold(I) as a minimum of the potential energy surface with calculations of the hessians showing no imaginary frequencies. Thermal decomposition starts at temperatures near 160 degrees C, leading to the formation of Au as the final residue at 1000 degrees C. The gold(I) complex with 2-mercaptothiazoline (Au-MTZ) is soluble in dimethyl sulfoxide (DMSO), and is insoluble in water, methanol, ethanol, acetonitrile and hexane. The antibacterial activities of the Au-MTZ complex were evaluated by an antibiogram assay using the disc diffusion method. The compound showed an effective antibacterial activity against Staphylococcus aureus (Gram-positive) and Escherichia coli and Pseudomonas aeruginosa (Gram-negative) bacterial cells. Biological analysis for evaluation of the cytotoxic effect of the Au-MTZ complex was performed using HeLa cells derived from human cervical adenocarcinoma. The complex presented a potent cytotoxic activity, inducing 85% of cell death at a concentration of 2.0 mu mol L(-1). (C) 2011 Elsevier Ltd. All rights reserved.

Bupivacaine 0.25% and methylene blue spread with epidural anesthesia in dog

Objective To evaluate the extent sensory and motor blocks produced by the epidural injection of different volumes of 0.25% bupivacaine (Bu) with methylene blue (MB), in dogs. Study design Prospective experimental trial. Animals Twenty healthy adult mongrel dogs, weighing 9.9 +/- 1.9 kg. Methods Dogs were randomly allocated into one of four groups that received 0.2, 0.4, 0.6 or 0.8 mL kg-1 of an epidural solution containing 0.25% Bu and MB. Sensory block was evaluated against time by pinching the tail, hind limb interdigital web, toenail bases and the skin over the vertebral dermatomes. Motor block was assessed by ataxia, hind limb weight-bearing ability and by loss of muscle tone of the tail and pelvic limbs. Data were collected at 2, 5, 10, 15 and 30 minutes after the end of epidural injection. After the final time point, dogs were euthanatized and laminectomies were conducted to expose the extent of the dural dye staining. Results The volumes 0.2, 0.4, 0.6 and 0.8 mL kg-1 of 0.25% Bu and MB blocked a mean of 5, 14.2, 20.2 and 21 dermatomes, respectively. The extent of the senory block increased up to a volume of 0.6 mL kg-1. Motor block was longer-lasting and more intense than sensory block. Complete dyeing of the spinal cord with MB was achieved in some dogs at 0.4 mL kg-1 and all dogs at 0.6 mL kg-1. Conclusions The volume of anesthetic injected into the epidural space plays an important role in the quality of the epidural anesthesia. At 0.25%, bupivacaine provided an efficient sensory block at 0.6 mL kg-1. Clinical relevance Relatively high volumes (0.6 mL kg-1) of 0.25%, BU and MB were needed to produce an effective sensory and motor block caudal to the umbilicus, but all spinal cord segments were reached by MB at this dose.

Prevention of toothbrushing abrasion of acid-softened enamel by CO(2) laser irradiation

Objective: The aim of the present study was to evaluate the effect of CO(2) laser irradiation (10.6 mu m) at 0.3 J/cm(2) (0.5 mu s; 226 Hz) on the resistance of softened enamel to toothbrushing abrasion, in vitro. Methods: Sixty human enamel samples were obtained, polished with silicon carbide papers and randomly divided into five groups (n = 12), receiving 5 different surface treatments: laser irradiation (L), fluoride (AmF/NaF gel) application (F), laser prior to fluoride (LF), fluoride prior to laser (FL), non-treated control (C). After surface treatment they were submitted to a 25-day erosive-abrasive cycle in 100 ml sprite light (90 s) and brushed twice daily with an electric toothbrush. Between the demineralization periods samples were immersed in supersaturated mineral solution. At the end of the experiments enamel surface loss was determined using a contact profilometer and morphological analysis was performed using scanning electron microscopy (SEM). For SEM analysis of demineralization pattern, cross-sectional cuts of cycled samples were prepared. The data were statistically analysed by one-way ANOVA model with subsequent pairwise comparison of treatments. Results: Abrasive surface loss was significantly lower in all laser groups compared to both control and fluoride groups (p < 0.0001 in all cases). Amongst the laser groups no significant difference was observed. Softened enamel layer underneath lesions was less pronounced in laser-irradiated samples. Conclusion: Irradiation of dental enamel with a CO(2) laser at 0.3 J/cm(2) (5 mu s, 226 Hz) either alone or in combination with amine fluoride gel significantly decreases toothbrushing abrasion of softened-enamel, in vitro. (C) 2011 Elsevier Ltd. All rights reserved.

Effect of Rosiglitazone on Insulin Sensitivity and Body Composition in Type 2 Diabetic Patients

Objective: To investigate the effects of rosiglitazone (RSG) on insulin sensitivity and regional adiposity (including intrahepatic fat) in patients with type 2 diabetes. Research Methods and Procedures: We examined the effect of RSG (8 mg/day, 2 divided doses) compared with placebo on insulin sensitivity and body composition in 33 type 2 diabetic patients. Measurements of insulin sensitivity (euglycemic hyperinsulinemic clamp), body fat (abdominal magnetic resonance imaging and DXA), and liver fat (magnetic resonance spectroscopy) were taken at baseline and repeated after 16 weeks of treatment. Results: There was a significant improvement in glycemic control (glycosylated hemoglobin -0.7 +/- 0.7%, p less than or equal to 0.05) and an 86% increase in insulin sensitivity in the RSG group (glucose-disposal rate change from baseline: 17.5 +/- 14.5 mumol glucose/min/kg free fat mass, P < 0.05), but no significant change in the placebo group compared with baseline. Total body weight and fat mass increased (p &LE; 0.05) with RSG (2.1 +/- 2.0 kg and 1.4 +/- 1.6 kg, respectively) with 95% of the increase in adiposity occurring in nonabdominal regions. In the abdominal region, RSG increased subcutaneous fat area by 8% (25.0 +/- 28.7 cm(2), p = 0.02), did not alter intra-abdominal fat area, and reduced intrahepatic fat levels by 45% (-6.7 +/- 9.7%, concentration relative to water). Discussion: Our data indicate that RSG greatly improves insulin sensitivity in patients with type 2 diabetes and is associated with an increase in adiposity in subcutaneous but not visceral body regions.

Quantitative trait loci for agronomic and seed quality traits in an F-2 and F-4 : 6 soybean population

Molecular breeding is becoming more practical as better technology emerges. The use of molecular markers in plant breeding for indirect selection of important traits can favorably impact breeding efficiency. The purpose of this research is to identify quantitative trait loci (QTL) on molecular linkage groups (MLG) which are associated with seed protein concentration, seed oil concentration, seed size, plant height, lodging, and maturity, in a population from a cross between the soybean cultivars 'Essex' and 'Williams.' DNA was extracted from F-2 generation soybean leaves and amplified via polymerase chain reaction (PCR) using simple sequence repeat (SSR) markers. Markers that were polymorphic between the parents were analyzed against phenotypic trait data from the F-2 and F-4:6 generation. For the F-2 population, significant additive QTL were Satt540 (MLG M, maturity, r(2)=0.11; height, r(2)=0.04, seed size, r(2)=0.061, Satt373 (MLG L, seed size, r(2)=0.04; height, r(2)=0.14), Satt50 (MLG A1, maturity r(2)=0.07), Satt14 (MLG D2, oil, r(2)=0.05), and Satt251 (protein r(2)=0.03, oil, r(2)=0.04). Significant dominant QTL for the F-2 population were Satt540 (MLG M, height, r(2)=0.04; seed size, r(2)=0.06) and Satt14 (MLG D2, oil, r(2)=0.05). In the F-4:6 generation significant additive QTL were Satt239 (MLG I, height, r(2)=0.02 at Knoxville, TN and r(2)=0.03 at Springfield, TN), Satt14 (MLG D2, seed size, r(2)=0.14 at Knoxville, TN), Satt373 (MLG L, protein, r(2)=0.04 at Knoxville, TN) and Satt251 (MLG B I, lodging r(2)=0.04 at Springfield, TN). Averaged over both environments in the F-4:6 generation, significant additive QTL were identified as Satt251 (MLG B 1, protein, r(2)=0.03), and Satt239 (MLG 1, height, r(2)=0.03). The results found in this study indicate that selections based solely on these QTL would produce limited gains (based on low r(2) values). Few QTL were detected to be stable across environments. Further research to identify stable QTL over environments is needed to make marker-assisted approaches more widely adopted by soybean breeders.

Water sorption into poly[(2-hydroxyethyl methacrylate)-co-(1-vinyl-2-pyrrolidone]at 310 K

Poly(2-hydroxyethyl methacrylate) and copolymers of 2-hydroxyethyl methacrylate (HEMA) and 1-vinyl-2-pyrrolidone (VP) in the form of cylindrical samples (approximate to8mm x 20mm) have been prepared and the sorption of water into these cylinders has been studied by the mass-uptake methods and by magnetic-resonance imaging. The equilibrium water contents for the cylinders were found to vary systematically with the copolymer composition. Diffusion of water into the cylinders was found to follow Fickian behaviour for cylinders with high HEMA contents, with the diffusion coefficients obtained from mass-uptake studies dependent on the copolymer composition, varying from 1.7 x 10(-11) m(2) s(-1) for poly(HEMA) to 2.0 x 10(-11) m(2) s(-1) for poly(HEMA-co-VP) with a composition of 1:1. However, NMR-imaging studies showed that, while the profiles of the water diffusion fronts for cylinders with high HEMA contents were Fickian, that for the 1:1 copolymer was not and indicated that the mechanism was Case III. The polymers which were rich in VP were characterized by a water-sorption process which follows Case-III behaviour. (C) 2003 Society of Chemical Industry.

Web marketing: desenvolvimento de uma presença online para uma unidade hoteleira – Projeto Oporto Invictus Hostel

O hotel, para muitos autores, tem como função oferecer abrigo para quem está distante da sua casa e atender às suas necessidades básicas. A hotelaria tem como função básica alojar as pessoas que estão longe da sua residência e que precisam de um quarto com uma cama para dormir e uma casa de banho (Duarte, 1996). Para Beni (2003), um hotel, além de ter a função básica de alojar, tem uma característica que nenhum outro estabelecimento comercial possui, que é o facto de o consumidor se deslocar até ao hotel para poder utilizar os serviços disponíveis. Outra característica muito especifica da atividade hoteleira, é o facto de o atendimento ser o mais importante na hora da prestação do serviço. O Hostel é uma designação muito usada atualmente como sinónimo de albergue. É um tipo de unidade hoteleira que se caracteriza pelos preços convidativos e pela possibilidade de socialização dos hóspedes, onde cada hóspede pode arrendar uma cama ou beliche, num dormitório partilhado, com casa de banho, lavandaria e, por vezes, cozinha, também em regime partilhado. Os Hostels são geralmente económicos praticando preços intitulados low-­‐cost. Definir uma estratégia para a Internet é hoje um imperativo para qualquer organização que pretenda utilizar este canal de comunicação para promover a sua atividade. As unidades hoteleiras também não são exceção; a necessidade de comunicar com os públicos alvo no sentido de aumentarem a captação de turistas exige uma presença na Internet que consiga simultaneamente informar e motivar à escolha pelos serviços prestados. A Internet evidencia um incontornável potencial informativo e comunicativo em questões de rapidez de circulação: número de pessoas que atinge e áreas geográficas que abarca; e devido às suas características de imaterialidade, instantaneidade e multimédia, democratiza o acesso à informação e a determinados tipos de bens, facilita a comunicação entre pessoas e instituições e universaliza as oportunidades, eliminando as barreiras espaciais, geográficas e temporais (Balsa, 2007). Rapidamente as unidades hoteleiras se aperceberam das vantagens e potencialidades da Internet: rápida, imediata, económica, integrada no dia-­‐a-­‐dia de trabalho e lazer e acessível a um cada vez maior número de pessoas. A nível geral, mas com especial incidência no caso das unidades hoteleiras, a Internet apresenta inúmeras vantagens ao nível da estruturação da informação em bases de dados e da sua apresentação dinâmica, tirando partido da inclusão de objetos multimédia em páginas HTML. Os objetos multimédia podem incluir áudio, vídeo,animações em tecnologia Flash e mesmo animações 3D tornando a visita a um sítio Web com este tipo de conteúdos, uma experiência muito gratificante. Por sua vez, a interatividade, característica do próprio funcionamento das páginas Web, facilita a interação entre a unidade hoteleira e o visitante. A interatividade permite ou facilita uma relação ativa entre o utilizador e o hotel. O utilizador passa de espectador passivo a interveniente ativo no processo de consulta da informação. Na web, os avanços tecnológicos têm sido constantes. Em 1980, Alvin Toffler’s no seu bestseller ‘The Third Wave’ previu um novo tipo de consumidor a quem chamou de ‘prosumer’ e que seria um misto de DIY (do-­it-­yourself) produtor e consumidor em mercados offline (Toffler, 1980). Foi sem dúvida de uma grande visão, mas sem os recentes avanços na web e nas tecnologias digitais, a maioria dos utilizadores não poderia ter dado o salto de espectador passivo para ator que participa ativamente na construção da web (Shuen, 2008). O aparecimento das redes sociais que permitem criar comunidades com interesses afins, o desenvolvimento de plataformas como o Youtube.com para a partilha de vídeos, a vulgarização de plataformas como o flickr.com para a partilha de imagens constituíram marcos determinantes para aquilo a que se designa por WEB 2.0 (tecnologia do século XXI). Enquanto no tempo da WEB 1.0 (tecnologia dos anos 90) os sites eram essencialmente estáticos e a interatividade não era levada aos limites, agora com a WEB 2.0 é possível construir modelos de negócio com conteúdos mais ricos simulando, com muito maior realismo, em ambientes virtuais, o que se passa em ambientes reais. Os sítios Web das unidades hoteleiras estão a evoluir rapidamente para um modelo que contemple as potencialidades da WEB 2.0 Tendo em consideração a importância das unidades hoteleiras no panorama do turismo, a relevância da Internet como meio de comunicação entre as instituições e os cidadãos e a necessidade das unidades hoteleiras disporem de uma estratégia de comunicação digital para difundir as suas valências e atividades, entendemos justificar-­se fazer uma revisão da literatura onde: procuraremos compreender a importância do turismo na sociedade atual assim como, o impacto das novas tecnologias da informação em atividades relacionadas com o turismo e ainda, procuraremos perceber quais os canais de comunicação digital que estão ao dispor dos profissionais de turismo, nomeadamente os gestores de unidades hoteleiras, para promover os seus serviços. O objetivo principal deste trabalho consiste em mostrar como foi desenvolvido uma estratégia de comunicação digital para promover online uma unidade hoteleira low cost, no caso presente o Oporto Invictus Hostel. Trata­‐se de um projeto integrado em que não só se criaram as diferentes peças de comunicação como se definiu e aplicou uma estratégia promocional com vista à divulgação do Hostel. O projeto apresentado evidencia como é possível, com recursos limitados, criar um sistema integrado de comunicação digital online que promova uma pequena unidade hoteleira, de forma a dar-­‐lhe visibilidade tanto a nível nacional como internacional. O projeto está dividido em cinco partes. Numa primeira parte é feita a apresentação do briefing que resultou de uma primeira reunião com o cliente. Numa segunda parte apresenta­‐se a fase de planeamento relativa ao desenvolvimento do projeto. Numa terceira parte descreve-­se o processo de implementação do projeto. Na quarta fase abordam-se os testes funcionais e na quinta e última fase faz-­se referencia a aspetos relacionados com a conclusão do projeto.

ZoomAzores project: implementation of a WebGIS for Nature and Adventure Tourism.

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

Myopia control with a novel peripheral gradient soft lens and orthokeratology: a 2-year clinical trial

Objective. To evaluate the degree of axial elongation with soft radial refractive gradient (SRRG) contact lenses, orthokeratology (OK), and single vision (SV) spectacle lenses (control) during a period of 1 year before treatment and 2 years after treatment. Methods. This was a prospective, longitudinal, nonrandomized study. The study groups consisted of 30, 29, and 41 children, respectively. The axial length (AL) was measured during 2 years after recruitment and lens fitting. Results. The baseline refractive sphere was correlated significantly (r 2 = 0.542; P < 0.0001) with the amount of myopia progression before baseline. After 2 years, the mean myopia progression values for the SRRG, OK, and SV groups were −0.56 ± 0.51, −0.32 ± 0.53, and −0.98 ± 0.58 diopter, respectively. The results represent reductions in myopic progression of 43% and 67% for the SRRG and OK groups, respectively, compared to the SV group. The AL increased more in the SV group compared to the SRRG and OK groups, with 27% and 38% lower axial elongation, respectively, compared to the SV group at the 2-year visit (P < 0.05). SRRG and OK showed no differences (P = 0.430). Conclusion. The SRRG lens significantly decreased AL elongation compared to the SV control group. The SRRG lens was similarly effective to OK in preventing myopia progression in myopic children and adolescent.

Measurement of the production of neighbouring jets in lead-lead collisions at √sNN=2.76 TeV with the ATLAS detector

This Letter presents measurements of correlated production of nearby jets in Pb+Pb collisions at sNN−−−√=2.76 TeV using the ATLAS detector at the Large Hadron Collider. The measurement was performed using 0.14 nb−1 of data recorded in 2011. The production of correlated jet pairs was quantified using the rate, RΔR, of ``neighbouring'' jets that accompany ``test'' jets within a given range of angular distance, ΔR, in the pseudorapidity--azimuthal angle plane. The jets were measured in the ATLAS calorimeter and were reconstructed using the anti-kt algorithm with radius parameters d=0.2, 0.3, and 0.4. RΔR was measured in different Pb+Pb collision centrality bins, characterized by the total transverse energy measured in the forward calorimeters. A centrality dependence of RΔR is observed for all three jet radii with RΔR found to be lower in central collisions than in peripheral collisions. The ratios formed by the RΔR values in different centrality bins and the values in the 40--80 % centrality bin are presented.