Descriptive study of production factors affecting performance traits in growing-finishing pgis in Spain.

The objective of this study was to build up a data set including productive performance and production factors data of growing-finishing (GF) pigs in Spain in order to perform a representative and reliable description of the traits of Spanish growing-finishing pig industry. Data from 764 batches from 452 farms belonging to nine companies (1,157,212 pigs) were collected between 2008 and 2010 through a survey including five parts: general, facilities, feeding, health status and performance. Most studied farms had only GF pigs on their facilities (94.7%), produced ‘industrial’ pigs (86.7%), had entire male and female (59.5%) and Pietrain-sired pigs (70.0%), housed between 13-20 pigs per pen (87.2%), had  50% of slatted floor (70%), single-space dry feeder (54.0%), nipple drinker (88.7%) and automatic ventilation systems (71.2%). A 75.0% of the farms used three feeding phases using mainly pelleted diets (91.0%), 61.3% performed three or more antibiotic treatments and 36.5% obtained water from the public supply. Continuous variables studied had the following average values: number of pigs placed per batch, 1,515 pigs; initial and final body weight, 19.0 and 108 kg; length of GF period, 136 days; culling rate, 1.4%; barn occupation, 99.7%; feed intake per pig and fattening cycle, 244 kg; daily gain, 0.657 kg; feed conversion ratio, 2.77 kg kg-1 and mortality rate, 4.3%. Data reflecting the practical situation of the Spanish growing and finishing pig production and it may contribute to develop new strategies in order to improve the productive and economic efficiency of GF pig units.

The spanish professional soccer foundations. (Las fundaciones clubes de futbol profesionales en España)

Sports foundations aiming at promoting sports activities partly outline the nonprofit area with specific concern. This study attempts to know the functions, general interests of professional soccer foundations in Spain, to describe their main characteristics and to ascertain if there are significant differences among them, according to their descriptive features. A document survey and analysis was carried out, with an assistance of own establishment of documental database. The findings not only indicate a significant difference between the classification of Spanish soccer foundations and their antiquities, but also manifest the tendency of the existence of physical person in members of founders with regard to its antiquity. The results of the present work implied that there were great dissimilarities of the elaboration of regulations depending on different regions in Spain.

Development and implementation of a virtual laboratory for training process improvement in the mechanics of continuous media

The project arises from the need to develop improved teaching methodologies in field of the mechanics of continuous media. The objective is to offer the student a learning process to acquire the necessary theoretical knowledge, cognitive skills and the responsibility and autonomy to professional development in this area. Traditionally the teaching of the concepts of these subjects was performed through lectures and laboratory practice. During these lessons the students attitude was usually passive, and therefore their effectiveness was poor. The proposed methodology has already been successfully employed in universities like University Bochum, Germany, University the South Australia and aims to improve the effectiveness of knowledge acquisition through use by the student of a virtual laboratory. This laboratory allows to adapt the curricula and learning techniques to the European Higher Education and improve current learning processes in the University School of Public Works Engineers -EUITOP- of the Technical University of Madrid -UPM-, due there are not laboratories in this specialization. The virtual space is created using a software platform built on OpenSim, manages 3D virtual worlds, and, language LSL -Linden Scripting Language-, which imprints specific powers to objects. The student or user can access this virtual world through their avatar -your character in the virtual world- and can perform practices within the space created for the purpose, at any time, just with computer with internet access and viewfinder. The virtual laboratory has three partitions. The virtual meeting rooms, where the avatar can interact with peers, solve problems and exchange existing documentation in the virtual library. The interactive game room, where the avatar is has to resolve a number of issues in time. And the video room where students can watch instructional videos and receive group lessons. Each audiovisual interactive element is accompanied by explanations framing it within the area of knowledge and enables students to begin to acquire a vocabulary and practice of the profession for which they are being formed. Plane elasticity concepts are introduced from the tension and compression testing of test pieces of steel and concrete. The behavior of reticulated and articulated structures is reinforced by some interactive games and concepts of tension, compression, local and global buckling will by tests to break articulated structures. Pure bending concepts, simple and composite torsion will be studied by observing a flexible specimen. Earthquake resistant design of buildings will be checked by a laboratory test video.

Teaching art and history to photonics students

The case to be reported in this paper is the teaching of topics involving the relation among Photonics, its history, the international situation and the artistic movements in each period. These kind of new studies correspond to a new tendency in teaching interdisciplinary topics to students coming from different areas. Two main courses, one in History and other one in Art, will be taken as examples. Theses two courses have been taught for several years in Madrid, Spain, for Telecomm students and the results have been very satisfactory

A water footprint assessment of a pair of jeans: the influence of agricultural policies on the sustainability of consumer products.

This study reports the results of a water footprint (WF) assessment of five types of textiles commonly used for the production of jeans, including two different fibres (cotton and Lyocell fibre) and five corresponding production methods for spinning, dyeing and weaving. The results show that the fibre production is the stage with the highest water consumption, being cotton production particularly relevant. Therefore, the study pays particular attention to the water footprint of cotton production and analyses the effects of external factors influencing the water footprint of a product, in this case, the incentives provided by the EU Common Agricultural Policy (CAP), and the relevance of agricultural practices to the water footprint of a product is emphasised. An extensification of the crop production led to higher WF per unit, but a lower overall pressure on the basins water resources. This study performs a sustainability assessment of the estimated cotton WFs with the water scarcity index, as proposed by Hoekstra et al. (2011), and shows their variations in different years as a result of different water consumption by crops in the rest of the river basin. In our case, we applied the assessment to the Guadalquivir, Guadalete and Barbate river basins, three semi-arid rivers in South Spain. Because they are found to be relevant, the available water stored in dams and the outflow are also incorporated as reference points for the sustainability assessment. The study concludes that, in the case of Spanish cotton production, the situation of the basin and the policy impact are more relevant for the status of the basin s water resources than the actual WF of cotton production. Therefore, strategies aimed at reducing the impact of the water footprint of a product need to analyse both the WF along the value chain and within the local context.

One or two poles of attraction in the international technological cooperation process?

In recent years, international cooperation processes have become a key mechanism for companies to internationalise their innovative activities, par ticularly in the case of small businesses whose size reduces their possibilities of developing internationalisation strategies autonomously in the same way as larger companies. In Spain, the existence of two parallel programmes with similar structures oriented towards Europe (EUREKA) and Latin America (IBEROEKA) raises the question as to whether the fact that companies participate in only one (unipolar) or both (bipolar) of these programmes is the result of a selection process, which, in turn, results in the existence of different collectives with different efficiency parameters. The aim of this study is to provide a comparative analysis based on the final reports of Spanish companies that have participated in the EUREKA programme. Two groups of companies were compared: one comprising companies that have only had international experience in Europe (EUREKA); and another formed by companies that have also carried out IBEROEKA projects. The conclusions confirm that the behaviour of both groups of companies differs substantially and reveal the importance of geographical perspective in the analysis of international cooperation in technology. This disparate behaviour is a relevant aspect that must be taken into account when designing policies to promote international technological cooperation.

An Analysis Of The Recommended Knowledge For The Software Project Management Discipline

According to the PMBOK (Project Management Body of Knowledge), project management is “the application of knowledge, skills, tools, and techniques to project activities to meet the project requirements” [1]. Project Management has proven to be one of the most important disciplines at the moment of determining the success of any project [2][3][4]. Given that many of the activities covered by this discipline can be said that are “horizontal” for any kind of domain, the importance of acknowledge the concepts and practices becomes even more obvious. The specific case of the projects that fall in the domain of Software Engineering are not the exception about the great influence of Project Management for their success. The critical role that this discipline plays in the industry has come to numbers. A report by McKinsey & Co [4] shows that the establishment of programs for the teaching of critical skills of project management can improve the performance of the project in time and costs. As an example of the above, the reports exposes: “One defense organization used these programs to train several waves of project managers and leaders who together administered a portfolio of more than 1,000 capital projects ranging in Project management size from $100,000 to $500 million. Managers who successfully completed the training were able to cut costs on most projects by between 20 and 35 percent. Over time, the organization expects savings of about 15 percent of its entire baseline spending”. In a white paper by the PMI (Project Management Institute) about the value of project management [5], it is stated that: “Leading organizations across sectors and geographic borders have been steadily embracing project management as a way to control spending and improve project results”. According to the research made by the PMI for the paper, after the economical crisis “Executives discovered that adhering to project management methods and strategies reduced risks, cut costs and improved success rates—all vital to surviving the economic crisis”. In every elite company, a proper execution of the project management discipline has become a must. Several members of the software industry have putted effort into achieving ways of assuring high quality results from projects; many standards, best practices, methodologies and other resources have been produced by experts from different fields of expertise. In the industry and the academic community, there is a continuous research on how to teach better software engineering together with project management [4][6]. For the general practices of Project Management the PMI produced a guide of the required knowledge that any project manager should have in their toolbox to lead any kind of project, this guide is called the PMBOK. On the side of best practices 10 and required knowledge for the Software Engineering discipline, the IEEE (Institute of Electrical and Electronics Engineers) developed the SWEBOK (Software Engineering Body of Knowledge) in collaboration with software industry experts and academic researchers, introducing into the guide many of the needed knowledge for a 5-year expertise software engineer [7]. The SWEBOK also covers management from the perspective of a software project. This thesis is developed to provide guidance to practitioners and members of the academic community about project management applied to software engineering. The way used in this thesis to get useful information for practitioners is to take an industry-approved guide for software engineering professionals such as the SWEBOK, and compare the content to what is found in the PMBOK. After comparing the contents of the SWEBOK and the PMBOK, what is found missing in the SWEBOK is used to give recommendations on how to enrich project management skills for a software engineering professional. Recommendations for members of the academic community on the other hand, are given taking into account the GSwE2009 (Graduated Software Engineering 2009) standard [8]. GSwE2009 is often used as a main reference for software engineering master programs [9]. The standard is mostly based on the content of the SWEBOK, plus some contents that are considered to reinforce the education of software engineering. Given the similarities between the SWEBOK and the GSwE2009, the results of comparing SWEBOK and PMBOK are also considered valid to enrich what the GSwE2009 proposes. So in the end the recommendations for practitioners end up being also useful for the academic community and their strategies to teach project management in the context of software engineering.

Plaster reinforcement with fibers by mineral wool obtained from the recycle of construction and demolition waste

The use of mineral wool is becoming more widespread due to increased acoustic and thermal demands of Spanish Technical Building Code. This increase affects both in rehabilitation and new construction projects. Therefore, waste generation of this type of insulating material is having more importance. The main objective of this research is to study the possibility of recycling fiber obtained from mineral wool of the C&DW as an alternative material to chopped glass fibers that are currently used as reinforcing elements in the prefabricated plaster. To achieve this objective, series are made of plaster E-35 additived with rock wool residue and glass wool residue at different rates of addition. These series are repeated by changing the additive by E fiberglass (length of 25mm) to make a comparative analysis with respect to the series additived with mineral wool waste. All the series are subjected to the test to determine Shore C surface hardness and mechanical testing to determine the compressive and flexural strength. From the results it can be concluded that: with rock wool residue, increases Shore C hardness up to 15% with respect to the glass fiber and 9% with respect to the glass wool, with a percentage of addition 2%. With rock wool residue, weight is decreased by 5% with respect to the glass fiber and 4% with respect to the glass wool waste, with an addition percentage of 4%. For an addition rate of 4%, results in the flexural strength test with fiberglass are 85% higher than those obtained with glass wool residue. However, for a percentage of 1% addition, the results obtained with glass wool residue are 35% higher than those obtained with fiberglass. For an addition rate of 3% results in the compressive strength test with fiberglass are 54% lower than those obtained with rock wool waste and 70% lower than those obtained with glass wool waste. Comparing the two mineral wools, it can be concluded that up to 3% of the addition, the glass wool series results obtained are 10% higher than those additived with rock wool. However, higher percentages of addition show that the results obtained with rock wool are 35% higher than those obtained with glass wool. The general conclusion is that the series additived with mineral wool from C&DW show better results in tests than the ones used nowadays as plaster reinforcement.

Funciones de la lectura en la enseñanza del inglés profesional y académico y estrategias de comprensión lectora

Este artículo analiza las funciones de la lectura en la enseñanza-aprendizaje del inglés profesional y académico, desde el marco de la comunicación, considerándola como un proceso interactivo entre lector y texto. El lector, alumno universitario que necesita desarrollar sus habilidades lingüísticas en inglés, como vehículo de transmisión del conocimiento científico. El texto, con la estructura propia de los géneros científicos, constituye para el alumno de habla española, además de un reto para el aprendizaje del IPA, una fuente de información. Para ello, se proponen unas actividades pedagógicas relacionadas con la didáctica de las estrategias lectoras previas, simultáneas y posteriores a la lectura de un texto. Abstract This article analyses the role of reading in the teaching of English for Professional and Academic Purposes from a communicative perspective, considering it as an interactive process between reader and text. The reader is a university student who needs to develop his linguistic abilities in English as a vehicle for the transmission of scientific knowledge. The text, with a structure proper of scientific genres, represents for the Spanish speaking student a stimulus for the learning of Academic English as well as a source of information. Several pedagogical activities, related to the methodology of teaching reading strategies: previous, simultaneous and after the reading process, are proposed.

La competencia lingüística en el uso de los grupos nominales en inglés académico y profesional y su didáctica: estudio empírico

Esta tesis doctoral consiste en un estudio empírico de la competencia lingüística del alumnado de la Escuela Técnica Superior de Ingenieros Industriales (ETSII), de la Universidad Politécnica de Madrid (UPM) en el uso de los grupos nominales (GN) en inglés profesional y académico (IPA). Mediante el análisis estadístico de los datos de las pruebas de nivel de inglés general y de conocimiento de los rasgos lingüísticos diferenciadores del IPA, se ha buscado constatar que los GN, tan presentes en los textos ingleses de carácter científico-técnico, son uno de los rasgos IPA que más dificultad presenta para el alumnado de ingeniería de habla española, cuya enseñanza es necesario abordar de forma diferenciada para que se puedan usar correctamente. El trabajo comienza presentando las características lingüísticas generales del IPA, entre las que destaca la frecuente presencia de los GN en las comunicaciones de carácter científico y técnico. Comprueba la hipótesis de que la comprensión y el uso de los GN es el rasgo lingüístico que ofrece mayor dificultad para esta población. Se detiene en explicar las propiedades de los GN en inglés y de las palabras que lo forman; es decir, muestra clases de palabras, regularidades y excepciones que están presentes en los textos científico-técnicos. También expone y razona el comportamiento de las distintas categorías gramaticales que pueden figurar como premodificadoras y se centra en ejemplos reales y datos objetivos, para llegar a conclusiones cuantitativas sobre el uso y la frecuencia de los GN en el discurso científico-técnico, así como en los diferentes grados de dificultad que dichas construcciones presentan al alumnado. El método de investigación seguido consiste en la recopilación y análisis estadístico de los datos procedentes de una muestra de población de alumnos de 5º curso de la ETSII de la UPM utilizando el análisis de la varianza ANOVA. Los datos se han tratado teniendo en cuenta el nivel general de inglés de cada alumno, según el Marco Común Europeo de Referencia para las Lenguas (MCERL), que oscila entre el nivel A2 y el C1, con una mayor frecuencia de B1 y B2. Las conclusiones se basan en el análisis de los datos empíricos obtenidos, que nos permiten deducir unos principios generales relevantes respecto al uso de los GN –simples y complejos- en el inglés para la ciencia y la tecnología (ICT) y al grado de dificultad que sus distintos tipos presentan al alumnado, con un grado de confianza superior al 95%. A partir de estos datos se ofrece un planteamiento didáctico que facilite la comprensión y elaboración de los distintos tipos de GN. La estructura general de la tesis se divide en seis capítulos. El capítulo 1 es una introducción en la que se presentan las razones que han motivado esta tesis, las hipótesis, los objetivos y la metodología de la misma. En el capítulo 2 se recogen los rasgos lingüísticos distintivos del ICT, incidiendo en la relación competencia comunicativa/competencia lingüística. En el capítulo 3 se analizan los GN profundizando en aspectos lingüísticos. El capítulo 4 se centra en el estudio empírico propiamente dicho y en el análisis estadístico de los datos. Del análisis se extraen las conclusiones objetivas sobre la dificultad que presentan los diferentes rasgos IPA analizados, con detenimiento en los GN simples y complejos. El capítulo 5 ofrece un planteamiento didáctico práctico sobre la enseñanza de los GN en el contexto del ICT, con una investigación sobre el terreno y el análisis estadístico de los resultados obtenidos antes y después de la aplicación didáctica. En el capítulo 6 se comentan los resultados obtenidos a lo largo del estudio, aportando las conclusiones, las limitaciones y las recomendaciones para futuros trabajos de investigación sobre el tema de la tesis. ABSTRACT This doctoral thesis consists of an empirical study of the linguistic competence of the Technical University of Madrid (UPM) industrial engineering students on the use of nominal groups (NG) in English for Academic and Professional Purposes (EAPP). In order to confirm that NG is the EAPP linguistic feature that presents the greatest difficulty to Spanish engineering students, a statistical analysis of the data obtained from the application of a general English test and the EAPP linguistic features tests -developed for this purpose- was carried out. Consequently, this linguistic feature needs to be specifically taught in order to be used correctly by Spanish engineering students. The study begins by presenting the general language characteristics of EAPP, among which the frequent presence of NG in scientific and technical writings stands out. It verifies the hypothesis that the understanding and use of NG in English is the most difficult linguistic feature for Spanish engineering students. It explains the features of English NG analyzing the words they are composed of by depicting the types of words, regularities and exceptions that are present in technical and scientific English. It also explains the behavior of the different grammar categories that act as pre-modifiers of the noun and focuses on real examples taken from authentic publications and quantitative data, to reach objective conclusions about the use and degree of difficulty of the NG for the students. The research methodology includes the gathering of data from the 5th year industrial engineering students´ tests and analyzing them by means of the ANOVA statistical application. The data have been treated in relation to the students’ Common European Framework of Reference for Languages (CEFRL) levels, which range from A2 to C1, although the majority lye between B1 and B2 levels. The conclusions are based on the results, which allow us to obtain relevant information about the understanding and use of NG –simple and complex- by the focus group, with a 95% confidence level. From these data, a methodological approach to NG teaching has been tested to help students to acquire such linguistic feature. The general structure of this thesis is divided into six chapters. The first is an introduction containing the reasons that have motivated this piece of research, the hypotheses, objectives and methodology employed. The second deals with the distinctive linguistic features of EST underlying the concepts of linguistic and communicative competence. Chapter three focuses on the grammar aspects of NG. Chapter four contains the empirical study and the statistical analysis of the data. Results allow us to reach objective conclusions about the degree of difficulty of the EAPP linguistic features studied, focusing on simple and complex NG. Chapter five discusses a methodological approach to the teaching of NG in an EST context, comparing students’ test results before and after the NG teaching application. Finally, chapter six discusses the findings obtained along the study, presenting the conclusions, limitations and recommendations for future research in this area.

How Can Local Manufacturing Improve Economic Sustainability? Saint Brissant: a case study of local manufacturing in Spain

Fast-fashion retailers and mass production dominate the fashion and apparel industry. Increased globalization, labor intensity and outsourcing to developing countries are fostering the interest in sustainability within the industry. There is a growth of a new movement attempting to offset the demand for fast fashion, "Slow Fashion" movement. Slow fashion is not time-based but quality-based approach in which designers, buyers, retailers and consumers are more aware of the impacts on workers, communities and ecosystems (Fletcher 2007). European Union has also some critical targets to reach by 2020. Spain, specifically, has to meet some requirements in terms of economy and sustainability. This exploratory study analyzed how slow fashion concept, precisely manufacturing locally, could improve economic development. Local manufacturing, its impact on economic development and the challenges of Spanish market are illustrated through a case study of one Spanish fashion brand, Saint Brissant.

Application of Vegetation Indices to Estimate Acorn Production at Iberian

The Iberian pig valued natural resources of the pasture when fattened in mountain. The variability of acorn production is not contained in any line of Spanish agricultural insurance. However, the production of arable pasture is covered by line insurance number 133 for loss of pasture compensation. This scenario is only contemplated for breeding cows and brave bulls, sheep, goats and horses, although pigs are not included. This insurance is established by monitoring ten-day composites Normalized Difference Vegetation Index (NDVI) measured by satellite over treeless pastures, using MODIS TERRA satellite. The aim of this work is to check if we can use a satellite vegetation index to estimate the production of acorns.

The influence of sensor placement on in-situ ultrasound wave velocity measurement.

Ultrasound wave velocity was measured in 30 pieces of Spanish Scots pine (Pinus sylvestris L.), 90 x 140 mm in cross-section and 4 m long. Five different sensor placement arrangements were used: end to end (V0), face to opposite face, edge to opposite edge, face to same face and edge to same edge. The pieces were successively shortened to 3, 2 and 1 m, in order to obtain these velocities and their ratios to reference value V0 for different lengths and angles with respect to the piece axis for the crossed measurements. The velocity obtained in crossed measurements is lower than V0. A correction coefficient for crossed velocities is proposed, depending on the angle, to adjust them to the V0 benchmark. The velocities measured on a surface, are also lower than V0, and their ratio with respect to V0 is close to 0.97 for distances equal to or greater than 18 times the depth of the beam.

Evolución del conocimiento del hormigón estructural hasta 1973

Esta tesis analiza los criterios con que fueron proyectadas y construidas las estructuras de hormigón hasta 1973, fecha coincidente con la Instrucción EH-73, que en contenido, formato y planteamiento, consagró la utilización de los criterios modernamente utilizados hasta ahora. Es heredera, además, de las CEB 1970. Esos años marcan el cambio de planteamiento desde la Teoría Clásica hacia los Estados Límite. Los objetivos perseguidos son, sintéticamente: 1) Cubrir un vacío patente en el estudio de la evolución del conocimiento. Hay tratados sobre la historia del hormigón que cubren de manera muy completa el relato de personajes y realizaciones, pero no, al menos de manera suficiente, la evolución del conocimiento. 2) Servir de ayuda a los técnicos de hoy para entender configuraciones estructurales, geometrías, disposiciones de armado, formatos de seguridad, etc, utilizados en el pasado, lo que servirá para la redacción más fundada de dictámenes preliminares sobre estructuras existentes. 3) Ser referencia para la realización de estudios de valoración de la capacidad resistente de construcciones existentes, constituyendo la base de un documento pre-normativo orientado en esa dirección. En efecto, esta tesis pretende ser una ayuda para los ingenieros de hoy que se enfrentan a la necesidad de conservar y reparar estructuras de hormigón armado que forman parte del patrimonio heredado. La gran mayoría de las estructuras, fueron construidas hace más de 40 años, por lo que es preciso conocer los criterios que marcaron su diseño, su cálculo y su construcción. Pretende determinar cuáles eran los límites de agotamiento y por tanto de seguridad, de estructuras dimensionadas con criterios de antaño, analizadas por la metodología de cálculo actual. De este modo, se podrá determinar el resguardo existente “real” de las estructuras dimensionadas y calculadas con criterios “distintos” a los actuales. Conocer el comportamiento de las estructuras construidas con criterios de la Teoría Clásica, según los criterios actuales, permitirá al ingeniero de hoy tratar de la forma más adecuada el abanico de necesidades que se puedan presentar en una estructura existente. Este trabajo se centra en la evolución del conocimiento por lo que no se encuentran incluidos los procesos constructivos. En lo relativo a los criterios de proyecto, hasta mediados del siglo XX, éstos se veían muy influidos por los ensayos y trabajos de autor consiguientes, en los que se basaban los reglamentos de algunos países. Era el caso del reglamento prusiano de 1904, de la Orden Circular francesa de 1906, del Congreso de Lieja de 1930. A partir de la segunda mitad del siglo XX, destacan las aportaciones de ingenieros españoles como es el caso de Alfredo Páez Balaca, Eduardo Torroja y Pedro Jiménez Montoya, entre otros, que permitieron el avance de los criterios de cálculo y de seguridad de las estructuras de hormigón, hasta los que se conocen hoy. El criterio rector del proyecto de las estructuras de hormigón se fundó, como es sabido, en los postulados de la Teoría Clásica, en particular en el “momento crítico”, aquel para el que hormigón y acero alcanzan sus tensiones admisibles y, por tanto, asegura el máximo aprovechamiento de los materiales y sin pretenderlo conscientemente, la máxima ductilidad. Si el momento solicitante es mayor que el crítico, se dispone de armadura en compresión. Tras el estudio de muchas de las estructuras existentes de la época por el autor de esta tesis, incluyendo entre ellas las Colecciones Oficiales de Puentes de Juan Manuel de Zafra, Eugenio Ribera y Carlos Fernández Casado, se concluye que la definición geométrica de las mismas no se corresponde exactamente con la resultante del momento crítico, dado que como ahora resultaba necesario armonizar los criterios de armado a nivel sección con la organización de la ferralla a lo largo de los diferentes elementos estructurales. Los parámetros de cálculo, resistencias de los materiales y formatos de seguridad, fueron evolucionando con los años. Se fueron conociendo mejor las prestaciones de los materiales, se fue enriqueciendo la experiencia de los propios procesos constructivos y, en menor medida, de las acciones solicitantes y, consiguientemente, acotándose las incertidumbres asociadas lo cual permitió ir ajustando los coeficientes de seguridad a emplear en el cálculo. Por ejemplo, para el hormigón se empleaba un coeficiente de seguridad igual a 4 a finales del siglo XIX, que evolucionó a 3,57 tras la publicación de la Orden Circular francesa de 1906, y a 3, tras la Instrucción española de 1939. En el caso del acero, al ser un material bastante más conocido por cuanto se había utilizado muchísimo previamente, el coeficiente de seguridad permaneció casi constante a lo largo de los años, con un valor igual a 2. Otra de las causas de la evolución de los parámetros de cálculo fue el mejor conocimiento del comportamiento de las estructuras merced a la vasta tarea de planificación y ejecución de ensayos, con los estudios teóricos consiguientes, realizados por numerosos autores, principalmente austríacos y alemanes, pero también norteamericanos y franceses. En cuanto a los criterios de cálculo, puede sorprender al técnico de hoy el conocimiento que tenían del comportamiento del hormigón desde los primeros años del empleo del mismo. Sabían del comportamiento no lineal del hormigón, pero limitaban su trabajo a un rango de tensióndeformación lineal porque eso aseguraba una previsión del comportamiento estructural conforme a las hipótesis de la Elasticidad Lineal y de la Resistencia de Materiales, muy bien conocidas a principios del s. XX (no así sucedía con la teoría de la Plasticidad, aún sin formular, aunque estaba implícita en los planteamientos algunos ingenieros especializados en estructuras de fábrica (piedra o ladrillo) y metálicas. Además, eso permitía independizar un tanto el proyecto de los valores de las resistencias reales de los materiales, lo que liberaba de la necesidad de llevar a cabo ensayos que, en la práctica, apenas se podían hacer debido a la escasez de los laboratorios. Tampoco disponían de programas informáticos ni de ninguna de las facilidades de las que hoy se tienen, que les permitiera hacer trabajar al hormigón en un rango no lineal. Así, sabia y prudentemente, limitaban las tensiones y deformaciones del material a un rango conocido. El modus operandi seguido para la elaboración de esta tesis, ha sido el siguiente: -Estudio documental: se han estudiado documentos de autor, recomendaciones y normativa generada en este ámbito, tanto en España como con carácter internacional, de manera sistemática con arreglo al índice del documento. En este proceso, se han detectado lagunas del conocimiento (y su afección a la seguridad estructural, en su caso) y se han identificado las diferencias con los procedimientos de hoy. También ha sido necesario adaptar la notación y terminología de la época a los criterios actuales, lo que ha supuesto una dificultad añadida. -Desarrollo del documento: A partir del estudio previo se han ido desarrollando los siguientes documentos, que conforman el contenido de la tesis: o Personajes e instituciones relevantes por sus aportaciones al conocimiento de las estructuras de hormigón (investigación, normativa, docencia). o Caracterización de las propiedades mecánicas de los materiales (hormigón y armaduras), en relación a sus resistencias, diagramas tensión-deformación, módulos de deformación, diagramas momento-curvatura, etc. Se incluye aquí la caracterización clásica de los hormigones, la geometría y naturaleza de las armaduras, etc. o Formatos de seguridad: Se trata de un complejo capítulo del que se pretende extraer la información suficiente que permita a los técnicos de hoy entender los criterios utilizados entonces y compararlos con los actuales. o Estudio de secciones y piezas sometidas a tensiones normales y tangenciales: Se trata de presentar la evolución en el tratamiento de la flexión simple y compuesta, del cortante, del rasante, torsión, etc. Se tratan también en esta parte del estudio aspectos que, no siendo de preocupación directa de los técnicos de antaño (fisuración y deformaciones), tienen hoy mayor importancia frente a cambios de usos y condiciones de durabilidad. o Detalles de armado: Incluye el tratamiento de la adherencia, el anclaje, el solapo de barras, el corte de barras, las disposiciones de armado en función de la geometría de las piezas y sus solicitaciones, etc. Es un capítulo de importancia obvia para los técnicos de hoy. Se incluye un anejo con las referencias más significativas a los estudios experimentales en que se basaron las propuestas que han marcado hito en la evolución del conocimiento. Finalmente, junto a las conclusiones más importantes, se enuncian las propuestas de estudios futuros. This thesis analyzes the criteria with which structures of reinforced concrete have been designed and constructed prior to 1973. Initially, the year 1970 was chosen as starting point, coinciding with the CEB recommendations, but with the development of the thesis it was decided that 1973 was the better option, coinciding with the Spanish regulations of 1973, whose content, format and description introduced the current criteria. The studied period includes the Classic Theory. The intended goals of this thesis are: 1) To cover a clear gap in the study of evolution of knowledge about reinforced concrete. The concept and accomplishments achieved by reinforced concrete itself has been treated in a very complete way by the main researchers in this area, but not the evolution of knowledge in this subject area. 2) To help the engineers understand structural configurations, geometries, dispositions of steel, safety formats etc, that will serve as preliminary judgments by experts on existing structures. To be a reference to the existing studies about the valuation of resistant capacity of existing constructions, constituting a basic study of a pre-regulation document. This thesis intends to be a help for the current generation of engineers who need to preserve and repair reinforced concrete structures that have existed for a significant number of years. Most of these structures in question were constructed more than 40 years ago, and it is necessary to know the criteria that influenced their design, the calculation and the construction. This thesis intends to determine the safety limits of the old structures and analyze them in the context of the current regulations and their methodology. Thus, it will then be possible to determine the safety of these structures, after being measured and calculated with the current criteria. This will allow the engineers to optimize the treatment of such a structure. This work considers the evolution of the knowledge, so constructive methods are not included. Related to the design criteria, there existed until middle of the 20th century a large number of diverse European tests and regulations, such as the Prussian norm of 1904, the Circular French Order of 1906, the Congress of Liège of 1930, as well as individual engineers’ own notes and criteria which incorporated the results of their own tests. From the second half of the 20th century, the contributions of Spanish engineers as Alfredo Páez Balaca, Eduardo Torroja and Pedro Jiménez Montoya, among others, were significant and this allowed the advancement of the criteria of the calculation of safety standards of concrete structures, many of which still exist to the present day. The design and calculation of reinforced concrete structures by the Classic Theory, was based on the ‘Critical Bending Moment’, when concrete and steel achieve their admissible tensions, that allows the best employment of materials and the best ductility. If the bending moment is major than the critical bending moment, will be necessary to introduce compression steel. After the study of the designs of many existing structures of that time by the author of this thesis, including the Historical Collections of Juan Manuel de Zafra, Eugenio Ribera and Carlos Fernandez Casado, the conclusion is that the geometric definition of the structures does not correspond exactly with the critical bending moment inherent in the structures. The parameters of these calculations changed throughout the years. The principal reason that can be outlined is that the materials were improving gradually and the number of calculated uncertainties were decreasing, thus allowing the reduction of the safety coefficients to use in the calculation. For example, concrete used a coefficient of 4 towards the end of the 19th century, which evolved to 3,57 after the publication of the Circular French Order of 1906, and then to 3 after the Spanish Instruction of 1939. In the case of the steel, a much more consistent material, the safety coefficient remained almost constant throughout the years, with a value of 2. Other reasons related to the evolution of the calculation parameters were that the tests and research undertaken by an ever-increasing number of engineers then allowed a more complete knowledge of the behavior of reinforced concrete. What is surprising is the extent of knowledge that existed about the behavior of the concrete from the outset. Engineers from the early years knew that the behavior of the concrete was non-linear, but they limited the work to a linear tension-deformation range. This was due to the difficulties of work in a non-linear range, because they did not have laboratories to test concrete, or facilities such as computers with appropriate software, something unthinkable today. These were the main reasons engineers of previous generations limited the tensions and deformations of a particular material to a known range. The modus operandi followed for the development of this thesis is the following one: -Document study: engineers’ documents, recommendations and regulations generated in this area, both from Spain or overseas, have been studied in a systematic way in accordance with the index of the document. In this process, a lack of knowledge has been detected concerning structural safety, and differences to current procedures have been identified and noted. Also, it has been necessary to adapt the notation and terminology of the Classic Theory to the current criteria, which has imposed an additional difficulty. -Development of the thesis: starting from the basic study, the next chapters of this thesis have been developed and expounded upon: o People and relevant institutions for their contribution to the knowledge about reinforced concrete structures (investigation, regulation, teaching). Determination of the mechanical properties of the materials (concrete and steel), in relation to their resistances, tension-deformation diagrams, modules of deformation, moment-curvature diagrams, etc. Included are the classic characterizations of concrete, the geometry and nature of the steel, etc. Safety formats: this is a very difficult chapter from which it is intended to provide enough information that will then allow the present day engineer to understand the criteria used in the Classic Theory and then to compare them with the current theories. Study of sections and pieces subjected to normal and tangential tensions: it intends to demonstrate the evolution in the treatment of the simple and complex flexion, shear, etc. Other aspects examined include aspects that were not very important in the Classic Theory but currently are, such as deformation and fissures. o Details of reinforcement: it includes the treatment of the adherence, the anchorage, the lapel of bars, the cut of bars, the dispositions of reinforcement depending on the geometry of the pieces and the solicitations, etc. It is a chapter of obvious importance for current engineers. The document will include an annex with the most references to the most significant experimental studies on which were based the proposals that have become a milestone in the evolution of knowledge in this area. Finally, there will be included conclusions and suggestions of future studies. A deep study of the documentation and researchers of that time has been done, juxtaposing their criteria and results with those considered relevant today, and giving a comparison between the resultant safety standards according to the Classic Theory criteria and currently used criteria. This thesis fundamentally intends to be a guide for engineers who have to treat or repair a structure constructed according to the Classic Theory criteria.

Los contenidos de expresión corporal en el titulo de grado en ciencias del deporte

La Expresión Corporal como materia educativa tiene su origen en España, de forma ligada a la Educación Física y su desarrollo en el ámbito universitario, durante la segunda mitad del siglo XX. Pero su corpus teórico no se encuentra definitivamente asentado, dando lugar a diferentes interpretaciones y consideraciones sobre cuáles deben ser considerados contenidos propios de la materia y sobre cómo deben ser estructurados. La presente tesis tiene por objeto de estudio precisamente los contenidos de la Expresión Corporal como materia perteneciente a las Ciencias de la Actividad Física y del Deporte, tratando de dar una respuesta fundamentada al planteamiento anterior. Para lo cual se seleccionaron y analizaron las principales obras de referencia para la materia en base a las cuales establecer una estructura de bloques de contenido y categorías asociadas. Se analizó la oferta formativa que, desde las universidades públicas españolas, se realizaba sobre el título de licenciado en Ciencias de la Actividad Física y del Deporte, comprobando por una parte la heterogeneidad en el tratamiento dado y por otra su adecuación a la estructura generada. Y en tercer lugar se examinó la normativa que articula y desarrolla el tratamiento de la Expresión Corporal en la Ley Orgánica de Educación, concretando el análisis en la etapa de Secundaria, en un proceso de triangulación sobre las fuentes documentales de mayor influencia, constatando una aparente falta de estructura en la selección y planteamiento de los contenidos a desarrollar dentro de la asignatura de Educación Física. En base a estas investigaciones, a la propia experiencia docente del doctorando y a la contribución de diferentes expertos en la materia se desarrolla una propuesta estructurada de contenidos de Expresión Corporal, la cual es implementada en el título de grado en Ciencias de la Actividad Física y del Deporte ofertado por la Universidad Politécnica de Madrid, analizando finalmente el nivel de relevancia que perciben los alumnos respecto de los contenidos de la materia planteados, infiriendo de los resultados obtenidos que se produce un aprendizaje significativo por parte de los futuros titulados. Se organizó la investigación en torno a cinco fases, utilizando en las tres primeras como metodología principal en análisis de contenido de las principales fuentes documentales (obras de referencia, programas docentes universitarios y normativa educativa), la cual es apoyada por otras herramientas como el grupo de discusión. La cuarta fase consistente en la elaboración de una propuesta estructurada de contenidos, contó con la valoración de un grupo de expertos en la materia. Mientras que en la fase de implementación y evaluación se recurrió al formato de entrevista colectiva mediante el empleo de cuestionario auto cumplimentado. La principal contribución de este trabajo es por tanto la presentación de una propuesta de estructuración de contenidos en Expresión Corporal, como parte de las manifestaciones básicas de la motricidad humana y enmarcada en el ámbito de las Ciencias de la Actividad Física y del Deporte; que tiene respaldo en las obras de referencia de la materia, en la formación inicial de los licenciados en Ciencias de la Actividad Física y del Deporte y en el desarrollo normativo de la Ley Orgánica de Educación; y que ha sido implementada en el actual título de Grado en Ciencias de la Actividad Física y del Deporte de la Universidad Politécnica de Madrid con resultados satisfactorios. ABSTRACT Corporal Expression as an educational subject has it origin s in Spain, linked to physical education and its development at University context, during the second half of the twentieth century. But his academic corpus has not been definitively settled, leading to different interpretations and considerations about what should be considered as proper contents of subject and how they should be structured. This thesis aims to study precisely the contents of the Corporal Expression as a subject belonging to Sciences of Physical Activity and Sport, trying to give a reasoned response to the previous approach. Taking this objective into consideration, main reference works were selected and analyzed to set a content structure and associated categories. The training offer of Spanish public universities in the Science of Physical Activity and Sport degree was analyzed, checking on the one hand the heterogeneity in the treatment and on the other their suitability to the structure generated. Thirdly, normative related to the treatment of Corporal Expression in the Ley Orgánica de Educación was examined paying special attention to the Secondary School stage. The process of triangulation which was performed using the most influential documentary sources suggested an apparent lack of structure and approach in the selection of contents to be developed in the subject of Physical Education. Based on these investigations, on the own teaching experience of the candidate and on the contribution of various experts in the field, a structured proposal of Corporal Expression contents is offered. This proposal has been implemented in the bachelor's degree in Sports Science offered by the Technical University of Madrid. Level of importance of the implemented contents perceived by students was analyzed and results suggested the presence of meaningful learning among graduates. Research was split into five phases. In the first three phases content analysis of the main documentary sources (reference books, university programs and educational standards), which was supported by other tools like the discussion group was the principal methodology. The fourth phase consisted in the development of a proposal structured content, involving the assessment of a group of experts in the field. In the implementation and evaluation phase collective interview using self-completed questionnaire was conducted The main contribution of this work is therefore presenting a proposal for structuring content in Corporal Expression, as a part of the basic manifestations of human motorskill and framed in the field of Sciences of Physical Activity and Sport; which draws on the support of reference works, initial training of graduates in Science of Physical Activity and Sport and the development of the normative of the Ley Orgánica de Educación; and has been implemented in the current Degree in Sports Science of the Technical University of Madrid with satisfactory results.