Infrequent p53 gene alterations in ulcerative colitis

The purpose of this study was to determine whether point mutations and loss of the p53 gene take place in ulcerative colitis which is histologically negative for dysplasia. DNA was extracted from 13 frozen rectal or colon biopsies and blood samples. Ulcerative colitis was classified histologically as active (10 cases) and inactive (3 cases). Exons 5-8 were amplified by PCR, treated with exonuclease and shrimp alkaline phosphatase and sequenced by the dideoxy chain termination method with the Sequenase Version 2.0 DNA sequencing kit. PCR products of intron 6 and exon 4 were digested with MspI and AccII, respectively, for RFLP analysis. No p53 gene mutation was detected in these cases. The number of informative patients for loss of heterozygosity (LOH) at the p53 intron 6 was high, 11 out of 12 (92%), whereas no LOH was observed. LOH affecting p53 exon 4 was not detected in lesions from 5 of 12 patients (42%). In ulcerative colitis, tumor progression is similar to that in sporadic colon cancer, and other oncogenes and tumor suppressor genes are likely to be mutated before the p53 gene.

Standardization of a fluorimetric assay for the determination of tissue angiotensin-converting enzyme activity in rats

The tripeptide Hip-His-Leu was used to standardize a fluorimetric method to measure tissue angiotensin-converting enzyme (ACE) activity in rats. The fluorescence of the o-phthaldialdehyde-His-Leu adduct was compared in the presence and absence of the homogenate (25 µl) to determine whether the homogenate from different tissues interfered with the fluorimetric determination of the His-Leu product. Only homogenates from lung and renal medulla and cortex showed significantly altered fluorescence intensity. To overcome this problem, the homogenate from these tissues were diluted 10 times with assay buffer. The specificity of the assay was demonstrated by the inhibition of ACE activity with 3 µM enalaprilat (MK-422). There was a linear relationship between product formation and incubation time for up to 90 min for homogenates of renal cortex and medulla and liver, for up to 60 min for ventricles and adrenals and for up to 30 min for the aorta, lung and atrium homogenates. In addition, there was a linear relationship between product formation and the amount of protein in the homogenates within the following range: lung, 30-600 µg; renal cortex and medulla, 40-400 µg; atrium and ventricles, 20-200 µg; adrenal, 20-100 µg; aorta, 5-100 µg; liver, 5-25 µg. No peptidase activity against the His-Leu product (31 nmol), assayed in borate buffer (BB), was detected in the different homogenates except the liver homogenate, which was inhibited by 0.1 mM r-chloromercuribenzoic acid. ACE activity in BB was higher than in phosphate buffer (PB) due, at least in part, to a greater hydrolysis of the His-Leu product in PB. ACE activity of lung increased 20% when BB plus Triton was used. Enzyme activity was stable when the homogenates were stored at -20o or -70oC for at least 30 days. These results indicate a condition whereby ACE activity can be easily and efficiently assayed in rat tissue samples homogenized in BB using a fluorimetric method with Hip-His-Leu as a substrate.

Käänteisen huutokaupan hyödyt ja haitat

Työn tavoitteena on selvittää mitkä ovat käänteisen huutokaupan hyödyt ja haitat kilpailutuksessa ja onko menetelmän käyttö suositeltavaa. Kirjallisuutta hyödyntämällä työssä tarkastellaan mitä käänteinen huutokauppa on, miten se soveltuu eri tilanteisiin (tuotteen, ostaja organisaation, myyjän ja huutokaupan järjestelyjen suhteen) ja mitkä ovat sen hyödyt ja haitat (taloudelliset, operatiiviset ja strategiset vaikutukset). Kirjallisuudessa esiintulleita hyötyjä ja haittoja verrataan rakennus ja projektinkehityspalveluita tarjoavan Skanskan kokemuksiin käänteisestä huutokaupasta käytännössä. Käänteisestä huutokaupasta todetaan olevan hyötyä markkinahinnan löytämisessä ja kustannussäästöjen saavuttamisessa. Ei kuitenkaan ole pystytty erottamaan, olisiko vastaava kustannussäästö saatu aikaseksi myös muilla kilpailutustavoilla. Käänteinen huutokauppa on työkalu joka sopii vain hyvin standardisoituihin tuotteisiin markkinoilla joilla on paljon kilpailua. Sitä ei myöskään yleensä vaikuta käytettävän useammin kuin kerran saman tuotteen kilpailuttamiseen. Käänteisen huutokaupan operatiivisista vaikutuksista on ristiriitaista tietoa. Kiertoaika on osassa tutkimuksista lyhentynyt ja osassa pidentynyt. Käänteisen huutokaupan vaikutuksista tuotteiden laatuun ei ole empiiristä näyttöä. Käänteisen huutokaupan suurimpia heikkouksia on toimittajasuhteiden heikkeneminen, joka ilmeni sekä läpi kirjallisuuden, että tämän työn empiriassa. On kuitenkin kyseenalaista konkretisoituuko toimittajien ärtymys kilpailutustavasta ostajalle merkittävillä tavoilla. Kokonaisuudessaan käänteinen huutokauppa on työläs ja rajoitettu kilpailutusmekanismi. Sen tuomat hyödyt eivät ole erityisen suuret verrattuna toisenlaisiin kilpailutustapoihin.

Uniform decrease of alpha-global field power induced by intermittent photic stimulation of healthy subjects

Nineteen-channel EEGs were recorded from the scalp surface of 30 healthy subjects (16 males and 14 females, mean age: 34 years, SD: 11.7 years) at rest and under trains of intermittent photic stimulation (IPS) at rates of 5, 10 and 20 Hz. Digitalized data were submitted to spectral analysis with fast fourier transformation providing the basis for the computation of global field power (GFP). For quantification, GFP values in the frequency ranges of 5, 10 and 20 Hz at rest were divided by the corresponding data obtained under IPS. All subjects showed a photic driving effect at each rate of stimulation. GFP data were normally distributed, whereas ratios from photic driving effect data showed no uniform behavior due to high interindividual variability. Suppression of alpha-power after IPS with 10 Hz was observed in about 70% of the volunteers. In contrast, ratios of alpha-power were unequivocal in all subjects: IPS at 20 Hz always led to a suppression of alpha-power. Dividing alpha-GFP with 20-Hz IPS by alpha-GFP at rest (R = alpha-GFP IPS/alpha-GFPrest) thus resulted in ratios lower than 1. We conclude that ratios from GFP data with 20-Hz IPS may provide a suitable paradigm for further investigations.

DNA topoisomerase inhibitors: biflavonoids from Ouratea species

Topoisomerase inhibitors are agents with anticancer activity. 7"-O-Methyl-agathisflavone (I) and amentoflavone (II) are biflavonoids and were isolated from the Brazilian plants Ouratea hexasperma and O. semiserrata, respectively. These biflavonoids and the acetyl derivative of II (IIa) are inhibitors of human DNA topoisomerases I at 200 µM, as demonstrated by the relaxation assay of supercoiled DNA, and only agathisflavone (I) at 200 µM also inhibited DNA topoisomerases II-alpha, as observed by decatenation and relaxation assays. The biflavonoids showed concentration-dependent growth inhibitory activities on Ehrlich carcinoma cells in 45-h culture, assayed by a tetrazolium method, with IC50 = 24 ± 1.4 µM for I, 26 ± 1.1 µM for II and 10 ± 0.7 µM for IIa. These biflavonoids were assayed against human K562 leukemia cells in 45-h culture, but only I showed 42% growth inhibitory activity at 90 µM. Our results suggest that biflavonoids are targets for DNA topoisomerases and their cytotoxicity is dependent on tumor cell type.

Paperi- ja selluteollisuus: Kestävän kehityksen rooli alalla ja alan tulevaisuus: Delfoi-tutkimus

Tutkimuksen tavoitteena oli hahmottaa paperi- ja selluteollisuuden nykytilaa ja tulevaisuutta kirjallisuuden sekä empiirisen tutkimuksen avulla. Tutkimuksen avulla hahmotettiin erityisesti kestävän kehityksen ja CSR:n merkitystä paperi- ja selluteollisuudessa, paperi- ja selluteollisuuden tämänhetkistä tilannetta sekä kilpailuedun lähteitä ja liiketoiminnan mahdollisuuksia alalla tulevaisuudessa. Tutkimuksen tutkimusmenetelmä oli kvalitatiivinen ja tutkimusmenetelmänä käytettiin Delfoi-menetelmää. Tutkimuksen perusteella voidaan todeta, että kestävä kehitys on tärkeä aihe paperi- ja selluteollisuudessa ja sen voidaan olettaa tulevaisuudessa olevan alalla vieläkin merkityksellisempi. Ympäristöllisistä tekijöistä ja näkökulmista on metsäteollisuudessa puhuttu jo vuosikymmenten ajan ja alan kansainvälistyminen sekä alalla viime aikoina tapahtuneet muutokset ovat nostaneet kiinnostusta kestävää kehitystä kohtaan entisestään. Tutkimuksen mukaan paperi- ja selluteollisuuden nykytilanne on tällä hetkellä haastava ja kilpailu alalla on kovaa. Syitä alan haastavaan tilanteeseen ovat alalla viime aikoina tapahtuneet muutokset ja kilpailun kiristyminen. Tulevaisuuden kilpailuedun lähteinä alalla voidaan nähdä muun muassa kestävään kehitykseen liittyvät tekijät, uudet tuotteet sekä materiaalit, markkinarakojen hyödyntäminen sekä kannattavuuden parantaminen. Uusia liiketoiminnan mahdollisuuksia alalla tulevaisuudessa ovat erikoistuotteet, bioenergia, innovaatiot, sivutuotteiden käyttö, kierrätettävät materiaalit, pakkausmateriaalit sekä biotalous.

Analyzing the Effects of the New Renewable Energy Policy in Russia on Investments into Wind, Solar and Small Hydro Power

This thesis presents an analysis of recently enacted Russian renewable energy policy based on capacity mechanism. Considering its novelty and poor coverage by academic literature, the aim of the thesis is to analyze capacity mechanism influence on investors’ decision-making process. The current research introduces a number of approaches to investment analysis. Firstly, classical financial model was built with Microsoft Excel® and crisp efficiency indicators such as net present value were determined. Secondly, sensitivity analysis was performed to understand different factors influence on project profitability. Thirdly, Datar-Mathews method was applied that by means of Monte Carlo simulation realized with Matlab Simulink®, disclosed all possible outcomes of investment project and enabled real option thinking. Fourthly, previous analysis was duplicated by fuzzy pay-off method with Microsoft Excel®. Finally, decision-making process under capacity mechanism was illustrated with decision tree. Capacity remuneration paid within 15 years is calculated individually for each RE project as variable annuity that guarantees a particular return on investment adjusted on changes in national interest rates. Analysis results indicate that capacity mechanism creates a real option to invest in renewable energy project by ensuring project profitability regardless of market conditions if project-internal factors are managed properly. The latter includes keeping capital expenditures within set limits, production performance higher than 75% of target indicators, and fulfilling localization requirement, implying producing equipment and services within the country. Occurrence of real option shapes decision-making process in the following way. Initially, investor should define appropriate location for a planned power plant where high production performance can be achieved, and lock in this location in case of competition. After, investor should wait until capital cost limit and localization requirement can be met, after that decision to invest can be made without any risk to project profitability. With respect to technology kind, investment into solar PV power plant is more attractive than into wind or small hydro power, since it has higher weighted net present value and lower standard deviation. However, it does not change decision-making strategy that remains the same for each technology type. Fuzzy pay-method proved its ability to disclose the same patterns of information as Monte Carlo simulation. Being effective in investment analysis under uncertainty and easy in use, it can be recommended as sufficient analytical tool to investors and researchers. Apart from described results, this thesis contributes to the academic literature by detailed description of capacity price calculation for renewable energy that was not available in English before. With respect to methodology novelty, such advanced approaches as Datar-Mathews method and fuzzy pay-off method are applied on the top of investment profitability model that incorporates capacity remuneration calculation as well. Comparison of effects of two different RE supporting schemes, namely Russian capacity mechanism and feed-in premium, contributes to policy comparative studies and exhibits useful inferences for researchers and policymakers. Limitations of this research are simplification of assumptions to country-average level that restricts our ability to analyze renewable energy investment region wise and existing limitation of the studying policy to the wholesale power market that leaves retail markets and remote areas without our attention, taking away medium and small investment into renewable energy from the research focus. Elimination of these limitations would allow creating the full picture of Russian renewable energy investment profile.

Effect of salbutamol on innervated and denervated rat soleus muscle

The objective of the present investigation was to perform a 14-day time-course study of treatment with salbutamol, a ß2 adrenoceptor agonist, on rat soleus muscle in order to assess fiber type selectivity in the hypertrophic response and fiber type composition. Male Wistar rats were divided into four groups: control (N = 10), treated with salbutamol (N = 30), denervated (N = 30), and treated with salbutamol after denervation (N = 30). Salbutamol was injected intraperitoneally in the rats of the 2nd and 4th groups at a concentration of 0.3 mg/kg twice a day for 2 weeks. The muscles were denervated using the crush method with pean. The animals were sacrificed 3, 6, 9, 12, and 14 days after treatment. Frozen cross-sections of soleus muscle were stained for myosin ATPase, pH 9.4. Cross-sectional area and percent of muscle fibers were analyzed morphometrically by computerized image analysis. Treatment with salbutamol induced hypertrophy of all fiber types and a higher percentage of type II fibers (21%) in the healthy rat soleus muscle. Denervation caused marked atrophy of all fibers and conversion from type I to type II muscle fibers. Denervated muscles treated with salbutamol showed a significantly larger cross-sectional area of type I muscle fibers, 28.2% compared to the denervated untreated muscle. Moreover, the number of type I fibers was increased. These results indicate that administration of salbutamol is able to induce changes in cross-sectional area and fiber type distribution in the early phase of treatment. Since denervation-induced atrophy and conversion from type I to type II fibers were improved by salbutamol treatment we propose that salbutamol, like other ß2 adrenoceptor agonists, may have a therapeutic potential in improving the condition of skeletal muscle after denervation.

Lean-projektin kannattavuuden ennalta-arviointi soveltamalla tuottojakauma-menetelmää

Tämän Pro Gradu-tutkielman tavoitteena on muodostaa työkalu Lean-projektin kannattavuuden ennalta-arvioinnin toteuttamiseen soveltamalla tuottojakauma-menetelmää. Lisäksi tutkimus pyrkii selvittämään, minkälaista siihen liittyvää akateemista tutkimusta on aikaisemmin toteutettu sekä mitä haasteita tämänkaltaisen arvion toteuttamiselle on. Tutkimuksen syntymistä on motivoinut Lean-pro-jektien kannattavuuden ennalta-arvioimisen akateemisesta tutkimuksesta tunnistettu tutkimusaukko. Empiirinen tutkimus on toteutettu kvalitatiivisena tapaustutkimuksena, yhteistyössä Lean-projekteihin erikoistuneen konsultointiyrityksen kanssa. Empiiristä tutkimusta on ohjannut sille valittu metodologia, jonka tavoitteena on ollut systemaattisesti muodostaa tutkimuksen tavoitteen mukainen työkalu. Aineistonkeruumenetelmänä on toiminut teemahaastattelu, joka on toteutettu kaksiosaisena. Niiden pohjalta saadut aineistot on analysoitu Grounded theory-menetelmää käyttäen. Tutkimuksen tulokset osoittavat, että muodostetulla tuottojakauma-menetelmää soveltavalla työkalulla on mahdollista toteuttaa Lean-pro¬jektin kannattavuuden ennalta-arviointi. Tulosten perusteella, sen avulla pystytään myös vastaamaan tutkimuksessa tunnistettuihin haasteisiin, jotka ovat aikaisemmin rajoittaneet tämän arvion toteuttamista. Työkalulla on mahdollista, tutkimuksen perusteella, myös tukea sen yhteistyöyrityksen Lean-projektien myyntiä.

Rankapuun ja -hakkeen laadun vaihtelu terminaalivarastoinnissa

Työssä tutkittiin polttoaineterminaalissa varastoitavan puupolttoaineen laadunmuutoksia. Tutkimuksessa tarkasteltiin hakettamattomien rankapuiden ja rankapuuhakkeen kosteuden ja lämpöarvon muutosta. Myös kuiva-ainetappiota tutkittiin aikaisempien tutkimusten perusteella. Tutkimusaineisto kerättiin Etelä-Savon Energian polttoaineterminaaleista. Kosteus-pitoisuuksia mitattiin Hydromette M2050 -pikakosteusmittarilla ja uunikuivaus-menetelmällä standardin SFS-EN 14774 mukaisesti. Tutkimuksessa huomattiin pikakosteusmittarin toimivan riittävän luotettavalla tasolla rankapuiden mittauksissa, mutta hakkeen mittauksissa mittari osoittautui toimimattomaksi. Varastointiaika ei vaikuttanut polttoaineiden lämpöarvoihin, mutta kosteuspitoisuus vaihteli suuresti. Tutkimustuloksista pääteltiin rangan kuivuvan terminaalivarastossa ja hakkeen kosteuden pysyvän vakiona. Energiasisällön puolesta rankapuuta voidaan varastoida yli 2 vuotta, mutta hakkeen varastointiaika tulisi pitää mahdollisimman lyhyenä.

Novel control, haptic and calibration methods for teleoperated electrohydraulic servo systems

The aim of this thesis is to propose a novel control method for teleoperated electrohydraulic servo systems that implements a reliable haptic sense between the human and manipulator interaction, and an ideal position control between the manipulator and the task environment interaction. The proposed method has the characteristics of a universal technique independent of the actual control algorithm and it can be applied with other suitable control methods as a real-time control strategy. The motivation to develop this control method is the necessity for a reliable real-time controller for teleoperated electrohydraulic servo systems that provides highly accurate position control based on joystick inputs with haptic capabilities. The contribution of the research is that the proposed control method combines a directed random search method and a real-time simulation to develop an intelligent controller in which each generation of parameters is tested on-line by the real-time simulator before being applied to the real process. The controller was evaluated on a hydraulic position servo system. The simulator of the hydraulic system was built based on Markov chain Monte Carlo (MCMC) method. A Particle Swarm Optimization algorithm combined with the foraging behavior of E. coli bacteria was utilized as the directed random search engine. The control strategy allows the operator to be plugged into the work environment dynamically and kinetically. This helps to ensure the system has haptic sense with high stability, without abstracting away the dynamics of the hydraulic system. The new control algorithm provides asymptotically exact tracking of both, the position and the contact force. In addition, this research proposes a novel method for re-calibration of multi-axis force/torque sensors. The method makes several improvements to traditional methods. It can be used without dismantling the sensor from its application and it requires smaller number of standard loads for calibration. It is also more cost efficient and faster in comparison to traditional calibration methods. The proposed method was developed in response to re-calibration issues with the force sensors utilized in teleoperated systems. The new approach aimed to avoid dismantling of the sensors from their applications for applying calibration. A major complication with many manipulators is the difficulty accessing them when they operate inside a non-accessible environment; especially if those environments are harsh; such as in radioactive areas. The proposed technique is based on design of experiment methodology. It has been successfully applied to different force/torque sensors and this research presents experimental validation of use of the calibration method with one of the force sensors which method has been applied to.

Thick Section Laser Beam Welding of Structural Steels: Methods for Improving Welding Efficiency

Laser beam welding (LBW) is applicable for a wide range of industrial sectors and has a history of fifty years. However, it is considered an unusual method with applications typically limited to welding of thin sheet metal. With a new generation of high power lasers there has been a renewed interest in thick section LBW (also known as keyhole laser welding). There was a growing body of publications during 2001-2011 that indicates an increasing interest in laser welding for many industrial applications, and in last ten years, an increasing number of studies have examined the ways to increase the efficiency of the process. Expanding the thickness range and efficiency of LBW makes the process a possibility for industrial applications dealing with thick metal welding: shipbuilding, offshore structures, pipelines, power plants and other industries. The advantages provided by LBW, such as high process speed, high productivity, and low heat input, may revolutionize these industries and significantly reduce the process costs. The research to date has focused on either increasing the efficiency via optimizing process parameters, or on the process fundamentals, rather than on process and workpiece modifications. The argument of this thesis is that the efficiency of the laser beam process can be increased in a straightforward way in the workshop conditions. Throughout this dissertation, the term “efficiency” is used to refer to welding process efficiency, specifically, an increase in efficiency refers an increase in weld’s penetration depth without increasing laser power level or decreasing welding speed. These methods are: modifications of the workpiece – edge surface roughness and air gap between the joining plates; modification of the ambient conditions – local reduction of the pressure in the welding zone; modification of the welding process – preheating of the welding zone. Approaches to improve the efficiency are analyzed and compared both separately and combined. These experimentally proven methods confirm previous findings and contribute additional evidence which expand the opportunities for laser beam welding applications. The focus of this research was primarily on the effects of edge surface roughness preparation and pre-set air gap between the plates on weld quality and penetration depth. To date, there has been no reliable evidence that such modifications of the workpiece give a positive effect on the welding efficiency. Other methods were tested in combination with the two methods mentioned above. The most promising - combining with reduced pressure method - resulted in at least 100% increase in efficiency. The results of this thesis support the idea that joining those methods in one modified process will provide the modern engineering with a sufficient tool for many novel applications with potential benefits to a range of industries.

Application of the Hsu model to soybean grain hydration

A comparative analysis of the theoretical-experimental study, developed by Hsu on the hydration of Amsoy 71 soybean grain, was performed through several soaking experiments using CD 202 soybean at 10, 20, 30, 40, and 50 °C, measuring moisture content over time. The results showed that CD 202 soybean equilibrium moisture content, Xeq, does not depend on temperature and is 21% higher than that found by Hsu, suggesting that soybean cultivar exerts great influence on Xeq. The Hsu model was numerically solved and its parameters were adjusted by the least squares method, with maximum deviations of +/- 10% relative to the experimental values. The limiting step in the mass transfer process during hydration corresponds to water diffusion inside the grain, leading to radial moisture gradients that decrease over time and with an increase in temperature. Regardless of the soybean cultivar, diffusivity increases as temperature or moisture content increases. However, the values of this transport property for Amsoy 71 were superior to those of CD 202, very close at the beginning of hydration at 20 °C and almost three times higher at the end of hydration at 50 °C.

Drying of sicilian lemon residue: influence of process variables on the evaluation of the dietary fiber produced

In this study, the effect of the process variables of the air-drying of Sicilian lemon residues on some technological properties of the fibers produced was studied. The determination and modeling of desorption isotherms were used to establish the equilibrium moisture content at 60, 75, and 90 °C using the static method with 8 saturated salt solutions. The best fit was obtained with BET and GAB models. The drying process was conducted in a vertical tray dryer and delineated according to a central composite experimental design (2²) using the following as factors: air velocity (0.5, 0.75 and 1 m/s) and temperature (60, 75, and 90 °C), and it presented a good fit to the exponential model (R² > 99.9%). The experimental design responses evaluated were the technological properties of the fibers: water-holding, oil-holding, and swelling capacity. Since these properties were present in high levels, the lemon residues could be used to increase content of fibers in foods resulting in the addition of nutritional benefits for the consumers.

Ascorbic acid and pectin in different sizes and parts of citric fruits

Citric fruits - in natura, as frozen pulp or even as juice - are one of the most important Brazilian exportation products. They are a source of ascorbic acid - a potent antioxidant, and pectin, which is used in the food industry and is an important dietary fiber. This project aims to quantify ascorbic acid and pectin contents in citric fruits, commercial oranges and tangerines, comparing them in sizes and varieties. Ascorbic acid amount was measured in juice comparing sizes, varieties and storage conditions, using a tritimetric method with 2.6-dichlorobenzenoindophenol indicator. Total and soluble pectin in each part of the fruits (peel, albedo, pulp and juice) were quantified using the polygalacturonic acid as a standard. Differences were found between the sizes. The highest content of vitamin C was found in the oranges (Bahia variety). Comparing the storage temperatures, the biggest loss was at room temperature. Albedo presented the highest content of pectin in all fruits. In juice, the total and soluble pectin contents increased as fruits size decreased. Oranges and tangerines differed in the amount of pectin