Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in Design

Process engineering of liver cells for drug testing applications

Dissertação para obtenção do Grau de Doutor em Bioengenharia

A comparison between thin film solar cells made from co-evaporated CuIn1-xGaxSe2using a one-stage process versus a three-stage process

Until this day, the most efficient Cu(In,Ga)Se2 thin film solar cells have been prepared using a rather complex growth process often referred to as three-stage or multistage. This family of processes is mainly characterized by a first step deposited with only In, Ga and Se flux to form a first layer. Cu is added in a second step until the film becomes slightly Cu-rich, where-after the film is converted to its final Cu-poor composition by a third stage, again with no or very little addition of Cu. In this paper, a comparison between solar cells prepared with the three-stage process and a one-stage/in-line process with the same composition, thickness, and solar cell stack is made. The one-stage process is easier to be used in an industrial scale and do not have Cu-rich transitions. The samples were analyzed using glow discharge optical emission spectroscopy, scanning electron microscopy, X-ray diffraction, current–voltage-temperature, capacitance-voltage, external quantum efficiency, transmission/reflection, and photoluminescence. It was concluded that in spite of differences in the texturing, morphology and Ga gradient, the electrical performance of the two types of samples is quite similar as demonstrated by the similar J–V behavior, quantum spectral response, and the estimated recombination losses.

Comparing the performance of geostatistical models with additional information from covariates for sewage plume characterization

In this work, kriging with covariates is used to model and map the spatial distribution of salinity measurements gathered by an autonomous underwater vehicle in a sea outfall monitoring campaign aiming to distinguish the effluent plume from the receiving waters and characterize its spatial variability in the vicinity of the discharge. Four different geostatistical linear models for salinity were assumed, where the distance to diffuser, the west-east positioning, and the south-north positioning were used as covariates. Sample variograms were fitted by the Mat`ern models using weighted least squares and maximum likelihood estimation methods as a way to detect eventual discrepancies. Typically, the maximum likelihood method estimated very low ranges which have limited the kriging process. So, at least for these data sets, weighted least squares showed to be the most appropriate estimation method for variogram fitting. The kriged maps show clearly the spatial variation of salinity, and it is possible to identify the effluent plume in the area studied. The results obtained show some guidelines for sewage monitoring if a geostatistical analysis of the data is in mind. It is important to treat properly the existence of anomalous values and to adopt a sampling strategy that includes transects parallel and perpendicular to the effluent dispersion.

Geometria: um estudo sobre quadriláteros no 4.º ano de escolaridade com recurso ao geoplano e ao GeoGebra

O presente estudo foi desenvolvido no âmbito do Mestrado de Didática da Matemática e Ciências da Natureza, no 1.º e 2.º Ciclos, no domínio da Geometria. Tem como principal objetivo compreender e analisar, através da implementação de uma sequência de tarefas de investigação e exploração, de que forma o processo de ensino e aprendizagem dos alunos, na área dos quadriláteros, com os recursos GeoGebra e o Geoplano, contribui para o desenvolvimento do raciocínio geométrico. Neste sentido, definiram-se as seguintes questões de investigação: (1) Qual a imagem concetual que os alunos possuem de cada um dos quadriláteros? (2) Que conhecimentos têm os alunos sobre as propriedades dos quadriláteros: quadrados, retângulos e losangos? (3) Quais os contributos do Geoplano e do GeoGebra na compreensão e identificação das propriedades dos quadriláteros? A metodologia adotada foi de natureza qualitativa, do tipo interpretativo, baseada em dois estudos de caso. Na recolha de dados, foram utilizados os seguintes instrumentos: observação, questionário, documentos produzidos pelos alunos, entrevistas informais, registos áudio e fotografias aos trabalhos realizados. Na análise dos dados, procurou-se descrever e interpretar os dados recolhidos, no âmbito do objeto do estudo. Os resultados mostraram que a sequência de tarefas e o modo como foram desenvolvidas foram fundamentais na compreensão dos conteúdos trabalhados. Regista-se também que os recursos utilizados motivaram os alunos e contribuíram para a interação, como também para a compreensão dos conceitos geométricos. Por outro lado, a utilização do GeoGebra e do Geoplano contribuíram para o desenvolvimento do raciocínio espacial e geométrico.

Decision-making process in radiology: the magnetic resonance example in the TA context

Based on the report for “Project IV” unit of the PhD programme on Technology Assessment (Doctoral Conference) at Universidade Nova de Lisboa (December 2011). This thesis research has the supervision of António Moniz (FCT-UNL and ITAS-KIT) and Michael Decker (Karlsruhe Institute of Technology-ITAS). Other members of the thesis committee are Carlos Alberto da Silva (University of Évora), José Maria de Albuquerque (Institute of Welding and Quality), Lotte Steuten (University of Twente), Mário Forjaz Secca (FCT-UNL) and Nelson Chibeles Martins (FCT-UNL).

Spatial distribution of dengue in the city of Cruzeiro, São Paulo State, Brazil: use of geoprocessing tools

The aim of this article is to identify patterns in spatial distribution of cases of dengue fever that occurred in the municipality of Cruzeiro, State of São Paulo, in 2006. This is an ecological and exploratory study using the tools of spatial analysis in the preparation of thematic maps with data from Sinan-Net. An analysis was made by area, taking as unit the IBGE census, the analysis included four months in 2006 which show the occurrence of the disease in the city. The thematic maps were constructed by TerraView 3.3.1 software, the same software provided the values of the indicators of Global Moran (I M) every month and the Kernel estimation. In the year 2006, 691 cases of dengue were georeferenced (with a rate of 864.2 cases/100,000 inhabitants); the indicators of Moran and p-values obtained were I M = 0.080 (March) p = 0.11; I M = 0.285 (April) p = 0.01; I M = 0.201 (May) p = 0.01 and I M = 0.002 (June) p = 0.57. The first cases were identified in the Northeast and Central areas of Cruzeiro and the recent cases, in the North, Northeast and Central. It was possible to identify census tracts where the epidemic began and how it occurred temporally and spatially in the city.

Safety function analysis in an industrial production process

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

New mechanisms that regulate the expression of genes implicated in the process of ketogenesis

Dissertação para obtenção do Grau de Mestre em Biotecnologia

SPATIAL DISTRIBUTION OF PHLEBOTOMINAE IN PUERTO IGUAZU-MISIONES, ARGENTINA-BRAZIL-PARAGUAY BORDER AREA

SUMMARY The first Argentinian autochthonous human case of visceral leishmaniasis (VL) was confirmed in Posadas (Misiones) in 2006. Since then, the disease has increased its incidence and geographical distribution. In the 2006-2012 period, 107 human cases were detected (11 deaths). The presence of Lutzomyia longipalpis was detected in peridomiciles in Puerto Iguazú urban area in 2010; some of these findings were associated with households where cases of canine VL had already been reported. The objective of this study was to ascertain the abundance and spatial distribution of Lu. longipalpis in Puerto Iguazú City, on the Argentina-Brazil-Paraguay border. Lu. longipalpis proved to be exclusively urban and was found in 31% of the households sampled (n = 53), 67% of which belonged to areas of low abundance, 20% to areas of moderate abundance and 13% to areas of high abundance. Nyssomyia whitmani was the only species found both in urban and peri-urban environments, and Migonemyia migonei was registered only on the outskirts of the city. Due to the fact that Puerto Iguazú is considered to be at moderate risk at the moment, it is necessary to intensify human and canine case controls, as well as take integrated prevention and control measures regarding the environment, vectors and reservoirs on the Argentina-Brazil-Paraguay border area.

Gender Differences in Spatial Cognition: Wayfinding Performance and Sketch Mapping Activity of German Speakers

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies

Fasciola hepatica IN BOVINES IN BRAZIL: DATA AVAILABILITY AND SPATIAL DISTRIBUTION

Fasciolosis is a disease of importance for both veterinary and public health. For the first time, georeferenced prevalence data of Fasciola hepatica in bovines were collected and mapped for the Brazilian territory and data availability was discussed. Bovine fasciolosis in Brazil is monitored on a Federal, State and Municipal level, and to improve monitoring it is essential to combine the data collected on these three levels into one dataset. Data were collected for 1032 municipalities where livers were condemned by the Federal Inspection Service (MAPA/SIF) because of the presence of F. hepatica. The information was distributed over 11 states: Espírito Santo, Goiás, Minas Gerais, Mato Grosso do Sul, Mato Grosso, Pará, Paraná, Rio de Janeiro, Rio Grande do Sul, Santa Catarina and São Paulo. The highest prevalence of fasciolosis was observed in the southern states, with disease clusters along the coast of Paraná and Santa Catarina and in Rio Grande do Sul. Also, temporal variation of the prevalence was observed. The observed prevalence and the kriged prevalence maps presented in this paper can assist both animal and human health workers in estimating the risk of infection in their state or municipality.

Development of regional spatial data infrastructure (SDI) case study in hearth of Borneo

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

A qualitive reasoning approach for improving query results for sketch based queries by topological analysis of spatial aggregation

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Framework development for providing accessibility to qualitative spatial calculi

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.