970 resultados para Proximity Voting
Resumo:
[spa] En este trabajo analizamos la hipótesis que las transferencias asignadas a los municipios políticamente alineados generan un mayor apoyo político que las transferencias asignada a los municipios gobernados por la oposición. Para contrastar esta hipótesis utilizamos datos de las transferencias recibidas por 617 municipios españoles procedentes de dos niveles de gobierno superiores (Regional o Autonómico y Supra-Local o Diputaciones) durante el período 1993-2003, así como datos de los votos obtenidos en las tres elecciones celebradas en los diferentes niveles de gobierno durante este período.
Resumo:
We report a spectroscopic study about the energy transfer mechanism among silicon nanoparticles (Si-np), both amorphous and crystalline, and Er ions in a silicon dioxide matrix. From infrared spectroscopic analysis, we have determined that the physics of the transfer mechanism does not depend on the Si-np nature, finding a fast (< 200 ns) energy transfer in both cases, while the amorphous nanoclusters reveal a larger transfer efficiency than the nanocrystals. Moreover, the detailed spectroscopic results in the visible range here reported are essential to understand the physics behind the sensitization effect, whose knowledge assumes a crucial role to enhance the transfer rate and possibly employing the material in optical amplifier devices. Joining the experimental data, performed with pulsed and continuous-wave excitation, we develop a model in which the internal intraband recombination within Si-np is competitive with the transfer process via an Auger electron"recycling" effect. Posing a different light on some detrimental mechanism such as Auger processes, our findings clearly recast the role of Si-np in the sensitization scheme, where they are able to excite very efficiently ions in close proximity to their surface. (C) 2010 American Institute of Physics.
Resumo:
A microstructural analysis of silicon-on-insulator samples obtained by high dose oxygen ion implantation was performed by Raman scattering. The samples analyzed were obtained under different conditions thus leading to different concentrations of defects in the top Si layer. The samples were implanted with the surface covered with SiO2 capping layers of different thicknesses. The spectra measured from the as-implanted samples were fitted to a correlation length model taking into account the possible presence of stress effects in the spectra. This allowed quantification of both disorder effects, which are determined by structural defects, and residual stress in the top Si layer before annealing. These data were correlated to the density of dislocations remaining in the layer after annealing. The analysis performed corroborates the existence of two mechanisms that generate defects in the top Si layer that are related to surface conditions during implantation and the proximity of the top Si/buried oxide layer interface to the surface before annealing.
Resumo:
The purpose of this research is to assess the vulnerabilities of a high resolution fingerprint sensor when confronted with fake fingerprints. The study has not been focused on the decision outcome of the biometric device, but essentially on the scores obtained following the comparison between a query (genuine or fake) and a template using an AFIS system. To do this, fake fingerprints of 12 subjects have been produced with and without their cooperation. These fake fingerprints have been used alongside with real fingers. The study led to three major observations: First, genuine fingerprints produced scores higher than fake fingers (translating a closer proximity) and this tendency is observed considering each subject separately. Second, scores are however not sufficient as a single measure to differentiate these samples (fake from genuine) given the variation due to the donors themselves. That explains why fingerprint readers without vitality detection can be fooled. Third, production methods and subjects greatly influence the scores obtained for fake fingerprints.
Resumo:
En este artículo se analizan los determinantes de la localización de la actividad industrial en España durante la segunda mitad del siglo XIX. El objetivo es estudiar la existencia de cambios en los factores explicativos de la localización, con el fin de identificar los efectos de la integración económica sobre la geografía industrial española. Para hacerlo, en primer lugar se analiza la literatura histórica existente. En segundo lugar, se describen las teorías que explican la localización de l'actividad. En tercer lugar, se realiza un análisis empírico de la localización y la concentración de la industria española al siglo XIX. A continuación, se propone un estudio econométrico de los determinantes de la localización industrial en dos cortes temporales, 1856 y 1893. Los resultados son consistentes con las teorías del comercio. Durante el decurso de la segunda mitad del siglo XIX, España paso a ser una economía integrada, la movilidad del trabajo y del capital se vio favorecida y como resultado, las diferencias relativas en las dotaciones de factores perdieron importancia en la explicación de las pautas de especialización industrial. Por el contrario, la integración económica favoreció la significación relativa de las economías de escala o de la proximidad a los mercados como elementos explicativos de la localización de la industria, favoreciendo, de esta manera, la aglomeración de la actividad industrial
Resumo:
[spa] En este trabajo analizamos la hipótesis que las transferencias asignadas a los municipios políticamente alineados generan un mayor apoyo político que las transferencias asignada a los municipios gobernados por la oposición. Para contrastar esta hipótesis utilizamos datos de las transferencias recibidas por 617 municipios españoles procedentes de dos niveles de gobierno superiores (Regional o Autonómico y Supra-Local o Diputaciones) durante el período 1993-2003, así como datos de los votos obtenidos en las tres elecciones celebradas en los diferentes niveles de gobierno durante este período.
Resumo:
In this paper we use a gravity model to study the trade performance of French and Spanishborder regions relatively to non-border regions, over the past two decades. We find that,controlling for their size, proximity and location characteristics, border regions trade onaverage between 62% and 193% more with their neighbouring country than other regions,and twice as much if they are endowed with good cross border transport infrastructures.Despite European integration, however, this trade outperformance has fallen for the mostperipheral regions within the EU. We show that this trend was linked in part to a shift in the propensity of foreign investors to move their affiliates from the regions near their home market to the regions bordering the EU core.
Resumo:
Lethal chromosomal frequencies were obtained from three Drosophila subobscura samples from the Mt. Avala (Serbia) population in September 2003 (0.218), June 2004 (0.204) and September 2004 (0.250). These values and those from other Balkan populations studied previously (Petnica, Kamariste, Zanjic and Djerdap) were used to analyze the possible effect of population, year, month and altitude above sea level on lethal chromosomal frequencies. According to ANOVAS no effect were observed. Furthermore, the lethal frequencies of the Balkan populations did not vary according to latitude. This is probably due to the relative proximity and high gene flow between these populations. From a joint study of all the Palearctic D. subobscura populations so far analyzed, it can be deduced that the Balkan populations are located in the central area of the species distribution. Finally, it seems that lethal chromosomal frequencies are a consequence of the genetic structure of the populations.
Resumo:
The sandstone-hosted Beverley uranium deposit is located in terrestrial sediments in the Lake Frome basin in the North Flinders Ranges, South Australia. The deposit is 13 km from the U-rich Mesoproterozoic basement of the Mount Painter inlier, which is being uplifted 100 to 200 m above the basin by neotectonic activity that probably initiated in the early Pliocene. The mineralization was deposited mainly in organic matter-poor Miocene lacustrine sands and partly in the underlying reductive strata comprising organic matter-rich clays and silts. The bulk of the mineralization consists of coffinite and/or uraninite nodules, growing around Co-rich pyrite with an S isotope composition (delta S-34 = 1.0 +/- 0.3 parts per thousand), suggestive of an early diagenetic lacustrine origin. In contrast, authigenic sulfides in the bulk of the sediments have a negative S isotope signature (delta S-34 ranges from -26.2 to -35.5 parts per thousand), indicative of an origin via bacterially mediated sulfate reduction. Minor amounts of Zn-bearing native copper and native lead also support the presence of specific, reducing microenvironments in the ore zone. Small amounts of carnotite are associated with the coffinite ore and also occur beneath a paleosoil horizon overlying the uranium deposit. Provenance studies suggest that the host Miocene sediments were derived from the reworking of Early Cretaceous glacial or glaciolacustrine sediments ultimately derived from Paleozoic terranes in eastern Australia. In contrast, the overlying Pliocene strata were in part derived from the Mesoproterozoic basement inlier. Mass-balance and geochemical data confirm that granites of the Mount Painter domain were the ultimate source of U and BEE at Beverley. U-Pb dating of coffinite and carnotite suggest that the U mineralization is Pliocene (6.7-3.4 Ma). The suitability of the Beverley deposit for efficient mining via in situ leaching, and hence its economic value, are determined by the nature of the hosting sand unit, which provides the permeability and low reactivity required for high fluid flow and low chemical consumption. These favorable sedimentologic and geometrical features result from a complex conjunction of factors, including deposition in lacustrine shore environment, reworking of angular sands of glacial origin, deep Pliocene weathering, and proximity to an active fault exposing extremely U rich rocks.
Resumo:
OBJECTIVE: To compare the management of invasive candidiasis between infectious disease and critical care specialists. DESIGN AND SETTING: Clinical case scenarios of invasive candidiasis were presented during interactive sessions at national specialty meetings. Participants responded to questions using an anonymous electronic voting system. PATIENTS AND PARTICIPANTS: Sixty-five infectious disease and 51 critical care physicians in Switzerland. RESULTS: Critical care specialists were more likely to ask advice from a colleague with expertise in the field of fungal infections to treat Candida glabrata (19.5% vs. 3.5%) and C. krusei (36.4% vs. 3.3%) candidemia. Most participants reported that they would change or remove a central venous catheter in the presence of candidemia, but 77.1% of critical care specialists would start concomitant antifungal treatment, compared to only 50% of infectious disease specialists. Similarly, more critical care specialists would start antifungal prophylaxis when Candida spp. are isolated from the peritoneal fluid at time of surgery for peritonitis resulting from bowel perforation (22.2% vs. 7.2%). The two groups equally considered Candida spp. as pathogens in tertiary peritonitis, but critical care specialists would more frequently use amphotericin B than fluconazole, caspofungin, or voriconazole. In mechanically ventilated patients the isolation of 10(4) Candida spp. from a bronchoalveolar lavage was considered a colonizing organism by 94.9% of infectious disease, compared to 46.8% of critical care specialists, with a marked difference in the use of antifungal agents (5.1% vs. 51%). CONCLUSIONS: These data highlight differences between management approaches for candidiasis in two groups of specialists, particularly in the reported use of antifungals.
Resumo:
Lychnophora pohlii Sch. Bip. (Asteraceae), known as "Arnica mineira", is widely used in folk medicine and very abundant in the altitude vegetation of rocky grassland. The aim of this work was to study the density of this species and its relationship with soil parameters in rocky grassland in Diamantina, in the Upper Jequitinhonha region, Minas Gerais. Ten contiguous 20 x 50 m plots were marked (total sampled area 10,000 m²) on the campus Juscelino Kubitschek of the Federal University of Jequitinhonha and Mucuri Valleys (UFVJM). The plants in these plots were evaluated for frequency, dominance and density. The relationship between the density of this species with nine soil physical and chemical properties was analyzed by means of canonical correspondence analysis (CCA). The highest plant abundance (I) of the species Lychnophora pohlii Sch. Bip. was found in the vegetation sampling areas: plot 6 with 255 plants, plot 7 with 173, plot 8 with 189, plot 9 with 159, and plot 1 with 151 plants. In these areas, the floristic soil characteristics were similar, resulting in spatial proximity in the ACC diagrams. The density of Lychnophora pohlii was higher in plots with higher pH, P-rem and base saturation, the variables most strongly correlated with the first axis of canonical correspondence analysis.
Resumo:
This paper presents the segmentation of bilateral parotid glands in the Head and Neck (H&N) CT images using an active contour based atlas registration. We compare segmentation results from three atlas selection strategies: (i) selection of "single-most-similar" atlas for each image to be segmented, (ii) fusion of segmentation results from multiple atlases using STAPLE, and (iii) fusion of segmentation results using majority voting. Among these three approaches, fusion using majority voting provided the best results. Finally, we present a detailed evaluation on a dataset of eight images (provided as a part of H&N auto segmentation challenge conducted in conjunction with MICCAI-2010 conference) using majority voting strategy.
Resumo:
Introduction: Giant cell tumour (GCT) is a benign but locally aggressive primary osteolytic bone tumour, prone to local recurrence after surgery. Denosumab is a human antibody against RANKL, an over-expressed ligand present on normal multinucleated cells, responsible for bone destruction in GCT. We report the case of a patient with an advanced GCT of the distal radius. The lesion was treated with adjuvant denosumab , followed by curettage. Clinical case: A 28 years old patient presented with a classical honeycomb osteolytic lesion in the left distal radius. Core-needle biopsy confirmed the diagnosis of GCT. Due to the proximity to the radio-carpal joint and advanced scalloping of the metaphyseal cortical bone, joint-salvage surgery was not possible. We initiated a neo-adjuvant treatment with denosumab (XGEVA), 120mg/ week for 1 month, followed by monthly injections for 6 months. During this time, a substantial bone recorticalization, without progression of the size of the tumour was noted. No local or systemic side effects were observed. We performed intra-lesional (curettage) excision and bone grafting after 6 months. Histological analysis revealed islets (10%) of viable tumour cells within fibrous tissue. Post-op evolution was eventless. Discussion: While surgery remains the treatment of choice for GCT, joint-salvage may not always be possible in case of extensive epiphyseal involvement. The presence of osteoclast-like giant cells seems to make those lesions prone to the specific anti-RANKL treatment with denosumab. Denosumab appears to slow down tumour growth and promote recorticalization of eroded bone. It might allow less aggressive surgery in selected cases.
Resumo:
Understanding the structure of interphase chromosomes is essential to elucidate regulatory mechanisms of gene expression. During recent years, high-throughput DNA sequencing expanded the power of chromosome conformation capture (3C) methods that provide information about reciprocal spatial proximity of chromosomal loci. Since 2012, it is known that entire chromatin in interphase chromosomes is organized into regions with strongly increased frequency of internal contacts. These regions, with the average size of ∼1 Mb, were named topological domains. More recent studies demonstrated presence of unconstrained supercoiling in interphase chromosomes. Using Brownian dynamics simulations, we show here that by including supercoiling into models of topological domains one can reproduce and thus provide possible explanations of several experimentally observed characteristics of interphase chromosomes, such as their complex contact maps.