Mentoring first-year pre-service teachers of primary science

Twenty-nine first-year pre-service teachers' perceptions of mentoring and primary science teaching were collected through a literature-based survey. Frequencies, means, and standard deviations of these responses provided data for analysis on these mentoring practices. Results indicated that even though mentors may provide feedback, the majority of mentors do not provide specific primary science mentoring in the areas of pedagogical knowledge, system requirements, and the modeling of teaching practice. It appears that the mentor's personal attributes may also influence the quality of mentoring. There were tentative conclusions that first-year pre-service teachers may not have strong beliefs about specific primary science mentoring practices, and possibly because of inexperience, may not be critical enough to analyse their mentoring in primary science teaching. Identifying specific mentoring for developing primary science teaching may assist mentors in their practices with pre-service teachers.

Beyond Science Education: Embedding sustainability in teacher education systems

This chapter will report on a study that sought to develop a systemwide approach to embedding education for sustainability (EfS (the preferred term in Australia) in teacher education. The strategy for a coordinated and coherent systemic approach involved identifying and eliciting the participation of key agents of change within the‘teacher education system’ in one state in Australia, Queensland. This consisted of one representative from each of the eight Queensland universities offering pre-service teacher education, as well as the teacher registration authority, the key State Government agency responsible for public schools, and two national professional organisations. Part of the approach involved teacher educators at different universities developing an institutional specific approach to embedding sustainability education within their teacher preparation programs. Project participants worked collaboratively to facilitate policy and curriculum change while the project leaders used an action research approach to inform and monitor actions taken and to provide guidance for subsequent actions to effect change simultaneously at the state, institutional and course levels. In addition to the state-wide multi-site case study, which we argue has broader applications to national systems in other countries, the chapter will include two institutional level case studies of efforts to embed sustainability in science teacher education.

Clinoenstatite coatings have high bonding strength, bioactive ion release, and osteoimmunomodulatory effects that enhance in vivo osseointegration

A number of coating materials have been developed over past two decades seeking to improve the osseointegration of orthopedic metal implants. Despite the many candidate materials trialed, their low rate of translation into clinical applications suggests there is room for improving the current strategies for their development. We therefore propose that the ideal coating material(s) should possess the following three properties: (i) high bonding strength, (ii) release of functional ions, and (iii) favourable osteoimmunomodulatory effects. To test this proposal, we developed clinoenstatite (CLT, MgSiO3), which as a coating material has high bonding strength, cytocompability and immunomodulatory effects that are favourable for in vivo osteogenesis. The bonding strength of CLT coatings was 50.1 ± 3.2 MPa, more than twice that of hydroxyapatite (HA) coatings, at 23.5 ± 3.5 MPa. CLT coatings released Mg and Si ions, and compared to HA coatings, induced an immunomodulation more conducive for osseointegration, demonstrated by downregurelation of pro-inflammatory cytokines, enhancement of osteogenesis, and inhibition of osteoclastogenesis. In vivo studies demonstrated that CLT coatings improved osseointegration with host bone, as shown by the enhanced biomechanical strength and increased de novo bone formation, when compared with HA coatings. These results support the notion that coating materials with the proposed properties can induce an in vivo environment better suited for osseointegration. These properties could, therefore, be fundamental when developing high-performance coating materials.

Pre-service teachers’ perceptions of authentic learning in a capstone unit

Capstone units in higher education courses are learning experiences which are designed to bring reflection and focus to a whole course of study while, at the same time, leading students toward their entry into a new world of work (Humphrey, Brown, & Benson, 2005). The capstone experience described in this paper runs as a conference, called the Stepping Out Conference. The conference is delivered as one unit and is mandatory for all fourth year pre-service teachers. Participation in a capstone unit is an effective way for students to begin thinking of themselves as teaching professionals rather than as continuing students. Students engage in the assessment as part of their capstone experience. The assessment is designed to measure students’ knowledge and skills as they relate to ‘authentic’ real life situations (Darling-Hammond, 1991). This paper details pre-service teachers’ experiences of authentic learning through their participation in a capstone unit.

Australian pre-service teachers' Knowledge and understanding of cyberbullying: Implications for school climate

The beliefs, attitudes and understandings of pre-service teachers towards bullying and more recently, cyberbullying remains unclear. Previous studies have found them to be generally lacking confidence to address bullying, which could impact negatively on school climate if, when they enter the profession, these beliefs undermine existing anti-bullying initiatives. This study explores Australian pre-service teachers' (N= 717) understanding and knowledge of traditional bullying and cyberbullying and their confidence and capacity to deal with it. Findings from self-report, anonymous questionnaires from students attending three universities in Australia indicated that two thirds (66%) of current pre-service teachers felt informed to very informed and capable to very capable (62%) of dealing with school bullying and 90% could discern cyber and traditional bullying behaviours from other online and offline aggressive acts. Gender and Year level differences were found. The potential impact of their knowledge and understanding of bullying and cyberbullying on school climate, and sustaining and maintaining anti-bullying interventions as they enter the profession is discussed.

The discursive positioning of graduating teachers in accreditation of teacher education programs

This paper uses discourse analysis techniques associated with Foucauldian archaeology to examine a teacher education accreditation document from Australia to reveal how graduating teachers are constructed through the discourses presented. The findings reveal a discursive site of contestation within the document itself and a mismatch between the identified policy discourses and those from the academic archive. The authors suggest that rather than contradictory representations of what constitutes graduating teacher quality and professionalism, what is needed is an accreditation process that agrees on constructions of graduate identity and professional practice that enact an intellectual and reflexive form of professionalism.

Curriculum reform in testing and accountability contexts

Recent international educational developments have important implications for the skills and understandings in curriculum and assessment that teachers develop, both in pre-service and in practice. Global developments in curriculum and assessment reform require teachers to utilise a network of knowledges and develop a repertoire of assessment skills and understandings. In a context of testing, accountability and auditing, data analysis skills are increasingly required to examine pedagogic practices for the development of intervention teaching and learning strategies to improve learning outcomes for all students (Marsh, 2009). However, too often the data are used predominantly for accountability purposes that serve at national levels as a catalyst for measurement, comparison and allocation of funding (Lingard and Sellar, 2013). With increased accountability demands brought about by global competitiveness and programs for international measurement of educational attainment, there has also emerged an increase in the use of testing, which in some countries has become the dominant form of assessment. For example in Australia, national testing of students in Years 3, 5, 7 and 9 began in 2008 under the National Australia Program – Literacy and Numeracy (NAPLAN). The results from this program for each school are published on the My School website (www.myschool.edu.au), increasing the competitive nature of the testing and intensifying the demands on teachers and schools. In particular, there has been a shift in the enacted curriculum in Australia to a focus on literacy and numeracy because the curriculum is tested.

Beyond social justice agendas: Indigenous knowledges in pre-service teacher education and practice in Australia

The space and positioning of Indigenous knowledges (IK) within Australian curricula and pedagogy are often contentious, informed by the broader Australian socio-cultural, political and economic landscape. Against changing educational policy, historically based on the myth of terra nullius, we discuss the shifting priorities for embedding Indigenous knowledges in educational practice in university and school curricula and pedagogy. In this chapter, we argue that personal and professional commitment to social justice is an important starting point for embedding Indigenous knowledges in the Australian school curricula and pedagogy. Developing teacher knowledge around embedding IK is required to enable teachers’ preparedness to navigate a contested historical/colonising space in curriculum decision-making, teaching and learning. We draw one mpirical data from a recent research project on supporting pre-service teachers as future curriculum leaders; the project was funded by the Office of Learning and Teaching (OLT). This project aimed to support future curriculum leaders to develop their knowledge of embedding IK at one Australian university. We propose supporting the embedding of IK in situ with pre-service teachers and their supervising teachers on practicum in real, sustained and affirming ways that shifts the recognition of IK from personal commitment to social justice in education, to one that values Indigenous knowledges as content to educate (Connell, 1993). We argue that sustained engagement with and appreciation of IKhas the potential to decolonise Australian curricula, shift policy directions and enhance race relations between Indigenous and non-Indigenous Australians .

Evaluation of a school-based creative arts therapy programme for adolescents from refugee backgrounds

Creative arts therapy programs have been identified as effective interventions with adolescents affected by adversity. The current study provided a controlled trial of creative arts therapy to address the psychosocial needs of students from refugee backgrounds. Forty-two students participated in a therapy trial, comprising an intervention and control group. Mental health and behavioural difficulties were assessed pre and post intervention. Hopkins Symptoms Checklist-25 (HSCL-25) and the Strengths and Difficulties Questionnaire (SDQ) were used to assess wellbeing. Findings suggested an effect for a reduction in behavioural difficulties for the treatment group. A significant reduction in emotional symptoms was found for the treatment group. Findings provide empirical support for school-based creative arts therapy interventions specific to refugee young people.

Vertically-aligned graphene flakes on nanoporous templates: morphology, thickness, and defect level control by pre-treatment

Various morphologies of the vertically-aligned graphene flakes were fabricated on the nanoporous templates treated with metal ions in solutions, as well as coated with a thin gold layer and activated in the low-temperature Ar plasma. The thickness and level of structural defects in the graphene flakes could be effectively controlled by a proper selection of the pre-treatment method. We have also demonstrated that various combinations of the flake thickness and defect levels can be obtained, and the morphology and density of the graphene pattern can be effectively controlled. The result obtained could be of interest for various applications requiring fabrication of large graphene networks with controllable properties.

Pre-lithiation of onion-like carbon/MoS2 nano-urchin anodes for high-performance rechargeable lithium ion batteries

Hybrid urchin-like nanostructures composed of a spherical onion-like carbon (OLC) core and MoS2 nanoleaves were synthesized by a simple solvothermal method followed by thermal annealing treatment. Compared to commercial MoS2 powder, MoS2/OLC nanocomposites exhibit enhanced electrochemical performance as anode materials of lithium-ion batteries (LIBs) with a specific capacity of 853 mA h g−1 at a current density of 50 mA g−1 after 60 cycles, and a moderate initial coulombic efficiency of 71.1%. Furthermore, a simple pre-lithiation method based on direct contact of lithium foil with MoS2/OLC nano-urchins was used to achieve a very high coulombic efficiency of 97.6% in the first discharge/charge cycle, which is at least 26% higher compared to that of pristine MoS2/OLC nano-urchins. This pre-lithiation method can be generalized to develop other carbon-metal sulfide nanohybrids for LIB anode materials. These results may open up a new avenue for the development of the next-generation high-performance LIBs.

Evaluation of electrocoagulation for the pre-treatment of coal seam water

This work explored the applicability of electrocoagulation (EC) using aluminium electrodes for the removal of contaminants which can scale and foul reverse osmosis membranes from a coal seam (CS) water sample, predominantly comprising sodium chloride, and sodium bicarbonate. In general, the removal efficiency of species responsible for scaling and fouling was enhanced by increasing the applied current density/voltage and contact times (30–60 s) in the EC chamber. High removal efficiencies of species potentially responsible for scale formation in reverse osmosis units such as calcium (100%), magnesium (87.9%), strontium (99.3%), barium (100%) and silicates (98.3%) were achieved. Boron was more difficult to eliminate (13.3%) and this was postulated to be due to the elevated solution pH. Similarly, fluoride removal from solution (44%) was also inhibited by the presence of hydroxide ions in the pH range 9–10. Analysis of produced flocs suggested the dominant presence of relatively amorphous boehmite (AlOOH), albeit the formation of Al(OH)3 was not ruled out as the drying process employed may have converted aluminium hydroxide to aluminium oxyhydroxide species. Evidence for adsorption of contaminants on floc surface sites was determined from FTIR studies. The quantity of aluminium released during the electrocoagulation process was higher than the Faradaic amount which suggested that the high salt concentrations in the coal seam water had chemically reacted with the aluminium electrodes.

In vitro pre-vascularisation of tissue-engineered constructs: A co-culture perspective

In vitro pre-vascularization is one of the main vascularization strategies in the tissue engineering field. Culturing cells within a tissue-engineered construct (TEC) prior to implantation provides researchers with a greater degree of control over the fate of the cells. However, balancing the diverse range of different cell culture parameters in vitro is seldom easy and in most cases, especially in highly vascularized tissues, more than one cell type will reside within the cell culture system. Culturing multiple cell types in the same construct presents its own unique challenges and pitfalls. The following review examines endothelial-driven vascularization and evaluates the direct and indirect role other cell types have in vessel and capillary formation. The article then analyses the different parameters researchers can modulate in a co-culture system in order to design optimal tissue-engineered constructs to match desired clinical applications.

The trend toward pre-graduation professional work experience for Australian young planners: Essential experience or essentially exploitation

This paper explores the changing employment expectations that frame the early professional work experiences of young planners in Australia. In particular, it considers the rising popularity of pre-graduation professional work experience as a precursor to formal entry into the workforce as a practising planner. This shift is being driven in part by employer expectations that graduates will already have ‘real world’ and relevant work experience. However, an equally significant driver appears to be a growing desire for early career and graduate planners to find ways to distinguish themselves from their peers in an increasingly tight labour market. Using data from an ongoing research project into the formative work experiences of young people this paper describes the three main types of pre-graduation professional work experience undertaken by young planners. It highlights the potential challenges and benefits of pre-graduation work experience from a legal, social and ethical perspective as well as from the perspective of young planners themselves. The paper concludes by reflecting on the role of the planning profession – employers, peak bodies and planning educators – in managing the tensions between producing ‘work ready’ graduates and safeguarding the employment conditions of early career planning professionals.

Learner driver mentor programs: Stakeholder perspectives on an ideal program

This study investigated the development and operation of Learner Driver Mentor Programs (LDMPs). LDMPs are used throughout Australia to assist young learner drivers to gain supervised on-road driving experience through coordinated access to vehicles and supervisors. There is a significant lack of research regarding these programs. In this study, 41 stakeholders including representatives from existing or ceased LDMPs as well as representatives of other groups completed a questionnaire in either survey or interview format. The questionnaire sought information about the objectives of LDMPs, any social problems that were targeted as well as the characteristics of an ideal program and what could be done to improve them. Stakeholders indicated that LDMPs were targeted at local communities and, therefore, there should be a clear local need for the program as well as community ownership and involvement in the program. Additionally, the program needed to be accessible and provide clear positive outcomes for mentees. The most common suggestion to improve LDMPs related to the provision of greater funding and sponsorship, particularly in relation to the vehicles used within the programs. LDMPs appear to have an important role in facilitating young learner drivers to acquire the appropriate number of supervised hours of driving practice. However, while a number of factors appear related to a successful program, the program must remain flexible and suitable for its local community. There is a clear need to complete evaluations of existing programs to ensure that future LDMPs and modifications to existing programs are evidence-based.