Sistema autónomo de alimentação para monitorização ambiental

Este projecto tem como principal objectivo a criação de sistemas autónomos de^alimentação para redes de sensores sem fios (RSSF) que prolonguem a autonomia das mesmas. Considerando que, geralmente, a alimentação das RSSF é fornecida por baterias e devido à limitação que estas impõem a nível de durabilidade e autonomia é crucial desenvolver sistemas capazes de captar e armazenar energia ambiental de modo a disponibilizá-la aos nós sensores quando estes necessitarem. Assim sendo, este projecto apresenta três protótipos cujo intuito visa prolongar a longevidade dos nós sensores. Nesta conformidade recorreu-se ao aproveitamento da energia produzida pelo sol, vento e cursos de água. Foram estudados dois protótipos solares, um com ligação directa ao elemento de armazenamento e o outro com um circuito que deve transferir o máximo de potência fornecida pela fonte. Para o aproveitamento do fluxo de ar foi desenvolvido um pequeno gerador trifásico com uma estrutura de captação de energia segundo o modelo de pás do aerogerador Savonius. As características (tensão e corrente) foram analisadas com o objectivo de poder desenvolver um circuito de controlo de carga para as baterias. O último sistema de controlo foi dirigido ao aproveitamento da água proveniente das levadas ou ribeiras. Este sistema também é composto por um pequeno gerador trifásico ao qual foi associado um sistema de pás do tipo Pelton. Este protótipo foi proposto para situações em o caudal à saída de um reservatório se mantém constante evitando desta forma, a necessidade de utilização de elementos de armazenamento de energia Todos os sistemas possuem circuitos que permitem a monitorização de variáveis fundamentais para a avaliação dos mesmos. Para a transferência de dados foi utilizada uma rede de sensores sem fios, com recurso a um rádio XBee. Estes dados são encaminhados para uma base de dados presente na estação central. Após todo o tratamento de dados, a informação é disponibilizada através de uma página da Internet.

Design, desenvolvimento e avaliação de experiências para o ponto de venda baseadas numa abordagem centrada no utilizador: o projeto Q’FNAC! 2.0

Este projeto teve como principal objetivo continuar o desenvolvimento do quiosque multimédia FNAC. Filial do Grupo Pinault Printemps, a FNAC é líder europeu na distribuição de bens tecnológicos e culturais. Nesta fase do desenvolvimento, o foco do projeto centrou-se na procura da melhor forma de mostrar ao utilizador a localização de um produto na loja FNAC Madeira, expansão das funcionalidades aos restantes produtos e o redesenho da interface do quiosque multimédia FNAC. Por forma a identificar uma forma eficaz de dar a conhecer ao utilizador a localização de um produto dentro da loja FNAC Madeira, foi efetuado um estudo que consistiu em questionários e testes com utilizadores para comparar duas formas de localização, por planta da loja ou por vídeo em tempo real. A primeira versão do quiosque multimédia FNAC apenas possuía suporte a livros, pelo que foi necessário tornar a aplicação o mais abstrata possível por forma a gerar as categorias de produtos em runtime recorrendo a ficheiros XML. Por fim, para redesenhar a interface do quiosque multimédia FNAC, foram efetuadas análises às interfaces da primeira versão, utilizando as heurísticas de Nielsen e os “Principles of good form” de Larry Constantine. Após a fase de análise as interfaces foram redesenhadas tendo por base a análise efetuada, o guia de norma FNAC 2011 e breves testes de usabilidade com utilizadores. Do estudo realizado, na procura pela melhor forma de localização, foram identificados alguns problemas relacionados com a utilização de um vídeo em tempo real para a identificação, tal como as interferências externas por parte dos outros clientes do espaço comercial e foi possível constatar um melhor desempenho e aceitação da localização por planta. A localização por planta mostrou-se suficiente para os utilizadores conseguirem identificar o local onde o produto estava exposto, pois permitia-lhes identificar o local onde encontravam-se e obter uma localização mais precisa do local, necessitando apenas de olhar em volta para conseguir relacionar o que era possível visualizar na planta com aquilo que os rodeava na loja.

GreenEnergy: produção de energia eléctrica a partir de fontes de energia renovável para sistemas de microprodução

O uso de energias renováveis está cada vez mais presente no nosso quotidiano. A forte aposta por parte de várias empresas, grupos privados e habitações domésticas na produção de energia renovável tem vindo a crescer bastante nos últimos anos, porque além de ser uma energia limpa, é economicamente vantajosa. No âmbito residencial na Ilha da Madeira, tem havido um grande crescimento na microprodução de energia fotovoltaica. Para que se consiga converter energia garantindo os critérios e qualidade da energia elétrica maximizando a eficiência são necessários conversores eletrónicos de potência, responsáveis pela conversão e gestão da energia produzida a partir de uma fonte de energia renovável e conversão para a REE (Rede Elétrica de Energia). A oferta de soluções na área tem vindo a aumentar com o aumento dos pedidos do mercado, existindo cada vez mais concorrência, devido ao surgimento de sistemas mais compactos e eficientes. Neste trabalho é desenvolvido um sistema para microprodução de energia renovável, através de uma ou mais fontes de energia, de maneira a que este seja compacto e eficiente, além de adicionar várias soluções a nível de software (automatismos) de maneira a aumentar as funções do sistema sem utilizar hardware adicional. Apresentam-se também resultados de simulação de maneira a demonstrar todas as funcionalidades do sistema. Conseguiu-se demonstrar que é possível melhorar o rendimento, qualidade de energia e diminuir os custos dos sistemas de conversão de energia utilizando software, mantendo o hardware do sistema. Além das melhorias no sistema que o software permite, conseguiu-se adicionar novos modos de funcionamento ao sistema utilizando automatismos.

Modelação e estudo paramétrico do comportamento de vigas de betão armado com Varões de GFRP

A introdução de um novo material para a execução de estruturas, implica um amplo estudo sobre o mesmo, para que seja aceite como um material de utilização, ou solução, corrente na engenharia civil. Os varões plásticos reforçados com fibra de vidro, GFRP,apresentam-se com diversas vantagens para uma solução de substituição das tradicionais armaduras de aço no betão armado. Um Estado da Arte foi apurado para determinar o ponto de situação do conhecimento e dos estudos realizados por vários autores, desde o início das pesquisas até aos mais recentes estudos disponíveis. Neste seguimento, o presente estudo incide na análise do comportamento à flexão de vigas contínuas de betão armado com varões de GFRP, submetidas a um carregamento distribuído. O trabalho realiza-se com base em 18 modelos de elementos finitos para uma análise paramétrica, sendo os parâmetros estudados, o vão, a percentagem de armadura de flexão e a esbelteza da secção. Para validação do modelo foram, modeladas 7 vigas reais ensaiadas no âmbito de trabalhos de investigação de dois autores Os resultados das modelações das análises paramétricas foram comparados com uma análise elástica e uma análise plástica, utilizando a metodologia do ACI 440.1R-06, para a carga última de dimensionamento. Outras comparações foram feitas através dos limites de deformação do EN 1992-1-1, 2004. Analisa-se a distribuição de esforços, não elásticos, devido à perda de rigidez da viga. Os modelos das vigas mais esbeltas e com menor percentagem de armadura mostraram maior concordância com a análise realizada. As deformações comparadas com o limite L/250 mostram concordância de resultados.

Um olhar sobre o patrimônio histórico-arquitetônico de Assú/RN: análise com base na percepção dos usuários e no ponto de vista técnico

This research analyzes the actual Historic-Architectural Heritage of Assú City which is located in Rio Grande do Norte State, Brazil, the study is based on both Assú s residents perception and technician s viewpoint. It looks forward to expose this community s relationship with the existing number of historic buildings, the scale of people s identity to the place and the association of this perception toward the preservation and conservation s scale of the historic settlement. Since the contextualization of the degradation s process of central areas, the study draw nea initially the conceptual aspects, focusing on the debate about heritage and the preservationist practice. The work complements the discussion through an approach on people-environment relationship and environmental perception, considering relevant factors for planning process. The obtained and presented data had diagnosed the condition of the architectural pile and also allowed this work to formulate recommendations for the studied area and architectural set in order to contribute for future urban politics implementation that consider the building, which are not only important to the considered population, but to the Rio Grande do Norte s History, as well

Eutrofização e capacidade de carga de fósforo de seis reservatórios a bacia do Rio Seridó, região semi-árida do Estado do RN

The eutrofization is a natural process of accumulation of nutrients in aquatic´s body that it has been accelerated for the human´s actives, mainly the related with the activities of camp, industrial and the inadequate disposition of the domestic sewage. The enrichment of the aquatic´s body with nutrients, mainly the nitrogen and the phosphorus, and the consequent proliferation of algae and Cyanobacteria can commit the quality of the water for the public provisioning, for the fish farming and for other ends. The problem becomes more critical when there is a shortage of water naturally as in the semi-arid area of the Brazilian northeast. Before that problem this work had as objective evaluates the trophic state of six reservoirs of the basin of River Seridó of Rio Grande of Norte and also estimate the capacity of load of match of the reservoir and risk probabilities based on the established limits by the resolution Conama 357/05. The results demonstrate that the six reservoirs are eutrofization, with concentration of total phosphorus and cloro a in the water upster to 50 e 12 μg l-1. The results show that space homogeneity exists in the state trophic of the reservoirs, but a significant variation interanual in function of the increase of the concentrations of nutrients and decrease of the transparency of the water with the reduction of the body of water accumulated in the reservoirs.The results of the simulation risk estocastic show that the reservoirs could receive annually from 72 to 216 Kg of P, assuming a risk of 10% of increasing in more than 30 μg l-1 the annual medium concentrations of total match in the water of these reservoirs. This load could be high in until 360 kg of P a year in case the managers assume a risk of 10% of increasing in more than 50 μg l-1 the annual medium concentrations of total phosphorus in the waters of these reservoirs

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Avaliação do comportamento reológico de pastas de cimento para poços de petróleo com adição de plastificantes

The isolation of adjacent zones encountered during oilwell drilling is carried out by Portland-based cement slurries. The slurries are pumped into the annular positions between the well and the casing. Their rheological behavior is a very important component for the cementing process. Nowadays, several alternative materials are used in oilwell cementing, with goal the modification and the improvement of their properties, mainly the increase of the fluidity. And this can be reached by using plasticizers additives able to account for different oilwell conditions, yielding compatible cement slurries and allowing enough time for the complete cementing operation. If the rheological properties of the slurry are properly characterized, the load loss and flow regime can be correctly predicted. However, this experimental characterization is difficult. Rheological models capable of describing the cement slurry behavior must be capable of predicting the slurry cement deformation within reasonable accuracy. The aim of this study was to characterize rheologically the slurries prepared with a especial class of Portland cement, water and plasticizers based on lignosulfonate, melamine and polycarboxylate at temperatures varying from 27°C to 72°C. The tests were carried out according to the practical recommendations of the API RP 10B guidelines. The results revealed a great efficiency and the dispersive power of the polycarboxylate, for all temperatures tested. This additive promoted high fluidity of the slurries, with no sedimentation. High lignosulfonate and melamine concentrations did not reduce the rheological parameters (plastic viscosity and yield stress) of the slurries. It was verified that these additives were not compatible with the type of cement used. The evaluated rheological models were capable of describing the behavior of the slurries only within concentration and temperature ranges specific for each type of additive

Análise do desempenho de um queimador infravermelho funcionando com gás liquefeito de petróleo e glicerina

The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with greater control of emissions due to the passage of exhaust gases through a macro-porous ceramic bed. This paper presents an infrared burner commercial, which was adapted an experimental ejector, capable of promoting a mixture of liquefied petroleum gas (LPG) and glycerin. By varying the percentage of dual-fuel, it was evaluated the performance of the infrared burner by performing an energy balance and atmospheric emissions. It was introduced a temperature controller with thermocouple modulating two-stage (low heat / high heat), using solenoid valves for each fuel. The infrared burner has been tested and tests by varying the amount of glycerin inserted by a gravity feed system. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by a data acquisition system which recorded real-time measurements of the thermocouples attached. The burner had a stable combustion at levels of 15, 20 and 25% of adding glycerin in mass ratio of LPG gas, increasing the supply of heat to the plate. According to data obtained showed that there was an improvement in the efficiency of the 1st Law of infrared burner with increasing addition of glycerin. The emission levels of greenhouse gases produced by combustion (CO, NOx, SO2 and HC) met the environmental limits set by resolution No. 382/2006 of CONAMA

Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)

The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Ecologia do fitoplâncton impactado por cultivo de tilápia do Nilo, oreochromis niloticus, em tanques-rede no açude Ministro João Alves, Parelhas, Rio Grande do Norte

The dams are limnic ecosystems of great importance for its multiple uses, among them, water supply for the public and to culture of artisanal fish are most relevant. The aim of the present study is to evaluate the physical-chemical characteristics and the phytoplankton community in two chosen sites (Point 1 littoral zone of point source; Point 2 pelagic zone of non-point source) of the Minister João Alves dam, which is also known as Boqueirão de Parelhas/RN. This represents the spatial distribution of the phytoplankton species in order to understand any possible alterations of the water quality and the phytoplankton composition in relation to the water quality originating from the impact of the tilapia, Oreochromis niloticus, culture. The study period also encompasses temporal variations exhibited in two seasons of an annual cycle, one during the dry season (Oct, Nov and Dec of 2008 and Jan of 2009), and the other rainy season (Mar, Apr, May and June of 2008) to extend the observation. The physicalchemical parameters, such as pH, temperature, electrical conductivity, concentration of dissolved oxygen were measured in situ and the values of the inorganic nutrients (nitrate, ammonium and orto-phosfato) and chlorophyll in the laboratory. The quali-quantitative analyses of the phytoplankton had been carried through sedimentation technique and the enumeration of the random of 400 cells, colonies and filaments counted using Sedgwick-Rafter counting chamber. The results of pH varied widely from the acidic to alkaline range with the minimum of 5.8 (± 0.8) and the maximum of 9.2 (± 0.7-0.8), at point 1 and 2. The dissolved oxygen content was higher in the rainy period than that in the dry period. The maximum electrical conductivity was of 1409 μScm-1 in point 1 and 431 minim of μScm-1, in point 2. There was a considerable alteration in the levels of inorganic nutrients such as nitrate-nitrogen, ammoniacal nitrogen and orthophosphate during the two cycles of study period. Phytoplankton assemblages presented a picture of alternate dominance among species Cyanobacteria, Bacillariophyceae and Chlorophyceae. The trophic state index diagnosed to the category of mesotrophic, which is based on the values of chlorophyll, total phosphorus and Secchi-disc measurements. The wind driven turbulence of the water column and the fresh inflow of water (flushing and dilution) during rainy season acted as constraint and did-not allow an exaggerated growth of the species of cyanobacteria. On the basis of the present we conclude that the culture of tilapias in cage-culture fails to produce pollution load that could compromise the quality of the water of the dam, probably be due to small dimension of the culture in relation to the size, volume of the water and the reservoir capacity support its own environment

Papel da localização da carga em determinação dos parâmetros do canal iônico

To aureus α-HL channel, we used the cysteine-scanning mutagenesis technique. Twenty-four mutants were produced from the substitution of a single aminoacid of the primary structure of the α-HL pro this yzed after the incorporation of a mutant channel in planar lipid bilayer membranes. The modified proteins were studied in the absence and presence of watersoluble specific sulphydryl-specific reagents, in order to introduce a strong positive or negative harge at positions of substitution. The introduction of a negative charge in the stem region onverted the selectivity of the channel from weak anionic to more cationic. However, the troduction of a positive charge increased its selectivity to the anion. The degree of these alterations was inversely dependent on the channel radius at the position of the introduced harge (selectivity). As to the asymmetry of the conductance-voltage, the influence of the harge was more complex. The introduction of the negative charge in the stem region (the trans art of the pore) provoked a decrease. The intensity of these alterations depended on the radius, and on the type of free charge at the pore entrance. These results suggest that the free charge at surrounds the pore wall is responsible for the cation-anion selectivity of the channel. The istribution of the charges between the entrances is crucial for determining the asymmetry of e conductance-voltage curves. We hope that these results serve as a model for studies with other nanometric channels, in biological or planar lipid bilayer membranes or in iotechnological applications

Desenpenho funcional, carga alostática e biomarcadores do estresse em idosos residentes na comunidade

Conselho Nacional de Desenvolvimento Científico e Tecnológico