How to Create Posters

This morning Ms. Hayden will introduce you to a computer program designed to help you create a poster for presentation tomorrow.

Range of motion after computed tomography-based simulation of intertrochanteric corrective osteotomy in cases of slipped capital femoral epiphysis: comparison of uniplanar flexion osteotomy and multiplanar flexion, valgisation, and rotational osteotomies

BACKGROUND: Various osteotomy techniques have been developed to correct the deformity caused by slipped capital femoral epiphysis (SCFE) and compared by their clinical outcomes. The aim of the presented study was to compare an intertrochanteric uniplanar flexion osteotomy with a multiplanar osteotomy by their ability to improve postoperative range of motion as measured by simulation of computed tomographic data in patients with SCFE. METHODS: We examined 19 patients with moderate or severe SCFE as classified based on slippage angle. A computer program for the simulation of movement and osteotomy developed in our laboratory was used for study execution. According to a 3-dimensional reconstruction of the computed tomographic data, the physiological range was determined by flexion, abduction, and internal rotation. The multiplanar osteotomy was compared with the uniplanar flexion osteotomy. Both intertrochanteric osteotomy techniques were simulated, and the improvements of the movement range were assessed and compared. RESULTS: The mean slipping and thus correction angles measured were 25 degrees (range, 8-46 degrees) inferior and 54 degrees (range, 32-78 degrees) posterior. After the simulation of multiplanar osteotomy, the virtually measured ranges of motion as determined by bone-to-bone contact were 61 degrees for flexion, 57 degrees for abduction, and 66 degrees for internal rotation. The simulation of the uniplanar flexion osteotomy achieved a flexion of 63 degrees, an abduction of 36 degrees, and an internal rotation of 54 degrees. CONCLUSIONS: Apart from abduction, the improvement in the range of motion by a uniplanar flexion osteotomy is comparable with that of the multiplanar osteotomy. However, the improvement in flexion for the simulation of both techniques is not satisfactory with regard to the requirements of normal everyday life, in contrast to abduction and internal rotation. LEVEL OF EVIDENCE: Level III, Retrospective comparative study.

Software als Schutzgegenstand des Europäischen Urheberrechts

After 20 years of silence, two recent references from the Czech Republic (Bezpečnostní softwarová asociace, Case C-393/09) and from the English High Court (SAS Institute, Case C-406/10) touch upon several questions that are fundamental for the extent of copyright protection for software under the Computer Program Directive 91/25 (now 2009/24) and the Information Society Directive 2001/29. In Case C-393/09, the European Court of Justice held that “the object of the protection conferred by that directive is the expression in any form of a computer program which permits reproduction in different computer languages, such as the source code and the object code.” As “any form of expression of a computer program must be protected from the moment when its reproduction would engender the reproduction of the computer program itself, thus enabling the computer to perform its task,” a graphical user interface (GUI) is not protected under the Computer Program Directive, as it does “not enable the reproduction of that computer program, but merely constitutes one element of that program by means of which users make use of the features of that program.” While the definition of computer program and the exclusion of GUIs mirror earlier jurisprudence in the Member States and therefore do not come as a surprise, the main significance of Case C-393/09 lies in its interpretation of the Information Society Directive. In confirming that a GUI “can, as a work, be protected by copyright if it is its author’s own intellectual creation,” the ECJ continues the Europeanization of the definition of “work” which began in Infopaq (Case C-5/08). Moreover, the Court elaborated this concept further by excluding expressions from copyright protection which are dictated by their technical function. Even more importantly, the ECJ held that a television broadcasting of a GUI does not constitute a communication to the public, as the individuals cannot have access to the “essential element characterising the interface,” i.e., the interaction with the user. The exclusion of elements dictated by technical functions from copyright protection and the interpretation of the right of communication to the public with reference to the “essential element characterising” the work may be seen as welcome limitations of copyright protection in the interest of a free public domain which were not yet apparent in Infopaq. While Case C-393/09 has given a first definition of the computer program, the pending reference in Case C-406/10 is likely to clarify the scope of protection against nonliteral copying, namely in how far the protection extends beyond the text of the source code to the design of a computer program and where the limits of protection lie as regards the functionality of a program and mere “principles and ideas.” In light of the travaux préparatoires, it is submitted that the ECJ is also likely to grant protection for the design of a computer program, while excluding both the functionality and underlying principles and ideas from protection under the European copyright directives.

UsedSoft and the Big Bang Theory: Is the e-Exhaustion Meteor about to Strike?

Since the UsedSoft ruling of the CJEU in 2012, there has been the distinct feeling that – like the big bang - UsedSoft signals the start of a new beginning. As we enter this brave new world, the Copyright Directive will be read anew: misalignments in the treatment of physical and digital content will be resolved; accessibility and affordability for consumers will be heightened; and lock-in will be reduced as e-exhaustion takes hold. With UsedSoft as a precedent, the Court can do nothing but keep expanding its own ruling. For big bang theorists, it is only a matter of time until the digital first sale meteor strikes non-software downloads also. This paper looks at whether the UsedSoft ruling could indeed be the beginning of a wider doctrine of e-exhaustion, or if it is simply a one-shot comet restrained by provisions of the Computer Program Directive on which it was based. Fighting the latter corner, we have the strict word of the law; in the UsedSoft ruling, the Court appears to willingly bypass the international legal framework of the WCT. As far as expansion goes, the Copyright Directive was conceived specifically to implement the WCT, thus the legislative intent is clear. The Court would not, surely, invoke its modicum of creativity there also... With perhaps undue haste in a digital market of many unknowns, it seems this might well be the case. Provoking the big bang theory of e-exhaustion, the UsedSoft ruling can be read as distinctly purposive, but rather than having copyright norms in mind, the standard for the Court is the same free movement rules that underpin the exhaustion doctrine in the physical world. With an endowed sense of principled equivalence, the Court clearly wishes the tangible and intangible rules to be aligned. Against the backdrop of the European internal market, perhaps few legislative instruments would staunchly stand in its way. With firm objectives in mind, the UsedSoft ruling could be a rather disruptive meteor indeed.

Vergleich von Softwarelösungen für die Ökobilanzierung – eine softwareergonomische Analyse

Ökobilanzierung von Produktsystemen dient der Abschätzung ihrer Wirkung auf die Umwelt. Eine vollständige Lebenswegbetrachtung erfordert auch die Einbeziehung intralogistischer Transportprozesse bzw. -mittel. Für die Erstellung von Ökobilanzen wird i. d. R. ein Computerprogramm verwendet. Die Demoversionen dreier kommerzieller Softwarelösungen (SimaPro, GaBi und Umberto NXT LCA) und die Vollversion einer Open Source Software (openLCA) wurden aus softwareergonomischer Sicht analysiert. Hierzu erfolgte u. a. der Nachbau der bereitgestellten Tutorials bzw. die Modellierung eigener Produktsysteme. Im Rahmen der Analyse wurden die Punkte • Entstehung, Verbreitung, Zielgruppe, • Eignung der Tutorials, Erlernbarkeit, • Grafische Benutzeroberfläche, Individualisierbarkeit der Software, • Umsetzung der Anforderungen aus den Ökobilanzierungsnormen, • Notwendige Arbeitsschritte zur Erstellung einer Ökobilanz einer vergleichenden Betrachtung unterzogen. Der Beitrag beinhaltet eine Einführung in die wesentlichen Prinzipien der Ökobilanzierung und die Grundsätze der Softwareergonomie. Diese werden zu softwareergonomischen Eigenschaften für Ökobilanzsoftwarelösungen subsumiert. Anschließend werden die Ergebnisse des Softwarevergleiches dargestellt. Abschließend erfolgt eine Zusammenfassung der Erkenntnisse.

Design and implementation of a multicriteria medical decision support system for diagnosis and treatment

Health care providers face the problem of trying to make decisions with inadequate information and also with an overload of (often contradictory) information. Physicians often choose treatment long before they know which disease is present. Indeed, uncertainty is intrinsic to the practice of medicine. Decision analysis can help physicians structure and work through a medical decision problem, and can provide reassurance that decisions are rational and consistent with the beliefs and preferences of other physicians and patients. ^ The primary purpose of this research project is to develop the theory, methods, techniques and tools necessary for designing and implementing a system to support solving medical decision problems. A case study involving “abdominal pain” serves as a prototype for implementing the system. The research, however, focuses on a generic class of problems and aims at covering theoretical as well as practical aspects of the system developed. ^ The main contributions of this research are: (1) bridging the gap between the statistical approach and the knowledge-based (expert) approach to medical decision making; (2) linking a collection of methods, techniques and tools together to allow for the design of a medical decision support system, based on a framework that involves the Analytic Network Process (ANP), the generalization of the Analytic Hierarchy Process (AHP) to dependence and feedback, for problems involving diagnosis and treatment; (3) enhancing the representation and manipulation of uncertainty in the ANP framework by incorporating group consensus weights; and (4) developing a computer program to assist in the implementation of the system. ^

Automatic identification of discourse markers in dialogues: An in-depth study of like and well

The lexical items like and well can serve as discourse markers (DMs), but can also play numerous other roles, such as verb or adverb. Identifying the occurrences that function as DMs is an important step for language understanding by computers. In this study, automatic classifiers using lexical, prosodic/positional and sociolinguistic features are trained over transcribed dialogues, manually annotated with DM information. The resulting classifiers improve state-of-the-art performance of DM identification, at about 90% recall and 79% precision for like (84.5% accuracy, κ = 0.69), and 99% recall and 98% precision for well (97.5% accuracy, κ = 0.88). Automatic feature analysis shows that lexical collocations are the most reliable indicators, followed by prosodic/positional features, while sociolinguistic features are marginally useful for the identification of DM like and not useful for well. The differentiated processing of each type of DM improves classification accuracy, suggesting that these types should be treated individually.

Incidence of breast cancer in first-degree female relatives of men with newly diagnosed prostate cancer

Prostate cancer is the most common incident cancer and the second leading cause of death in men in the United States. Although numerous attempts have been made to identify risk factors associated with prostate cancer, the results have been inconsistent and conflicting. The only established risk factors are age and ethnicity. A positive family history of prostate cancer has also been shown to increase the risk two- to three-fold among close relatives.^ There are several similarities between breast and prostate cancer that make the relationship between the two of interest. (1) Histologically, both cancers are predominantly adenocarcinomas, (2) both organs have a sexual and/or reproductive role, (3) both cancers occur in hormone-responsive tissue, (4) therapy often consists of hormonal manipulation, (5) worldwide distribution patterns of prostate and breast cancer are positively correlated.^ A family history study was conducted to evaluate the aggregation of prostate cancer and co-aggregation of breast cancer in 149 patients referred to The University of Texas, M.D. Anderson Cancer Center with newly diagnosed prostate cancer. All patients were white, less than 75 years of age at diagnosis and permanent residents of the United States. Through a personal interview with the proband, family histories were collected on 1,128 first-degree relatives. Cancer diagnoses were verified through medical records or death certificate. Standardized incidence ratios were calculated using a computer program by Monson incorporating data from Connecticut Tumor Registry.^ In this study, familial aggregation of prostate cancer was verified only among the brothers, not among fathers. Although a statistically significant excess of breast cancer was not found, the increased point estimates in mothers, sisters and daughters are consistent with a co-aggregation hypothesis. Rather surprising was the finding of a seven-fold increased risk of prostate cancer and a three-fold increased risk of breast cancer among siblings in the presence of a maternal history of any cancer. Larger family history studies including high risk (African-Americans) and lower-risk groups (Hispanics) and incorporating molecular genetic evaluations should be conducted to determine if genetic differences play a role in the differential incidence rates across ethnic groups. ^

Spatial distribution of orofacial cleft birth defects and uranium-radium concentrations in tap water in Atascosa, Bee, Brooks, Calhoun, Duval, Goliad, Hidalgo, Jim Hogg, Jim Wells, Karnes, Kleberg, Live Oak, McMullen, Nueces, San Patricio, Refugio, Starr, Victoria, Webb, and Zavala Counties, Texas

Background Past and recent evidence shows that radionuclides in drinking water may be a public health concern. Developmental thresholds for birth defects with respect to chronic low level domestic radiation exposures, such as through drinking water, have not been definitely recognized, and there is a strong need to address this deficiency in information. In this study we examined the geographic distribution of orofacial cleft birth defects in and around uranium mining district Counties in South Texas (Atascosa, Bee, Brooks, Calhoun, Duval, Goliad, Hidalgo, Jim Hogg, Jim Wells, Karnes, Kleberg, Live Oak, McMullen, Nueces, San Patricio, Refugio, Starr, Victoria, Webb, and Zavala), from 1999 to 2007. The probable association of cleft birth defect rates by ZIP codes classified according to uranium and radium concentrations in drinking water supplies was evaluated. Similar associations between orofacial cleft birth defects and radium/radon in drinking water were reported earlier by Cech and co-investigators in another of the Gulf Coast region (Harris County, Texas).50, 55 Since substantial uranium mining activity existed and still exists in South Texas, contamination of drinking water sources with radiation and its relation to birth defects is a ground for concern. ^ Methods Residential addresses of orofacial cleft birth defect cases, as well as live births within the twenty Counties during 1999-2007 were geocoded and mapped. Prevalence rates were calculated by ZIP codes and were mapped accordingly. Locations of drinking water supplies were also geocoded and mapped. ZIP codes were stratified as having high combined uranium (≥30μg/L) vs. low combined uranium (<30μg/L). Likewise, ZIP codes having the uranium isotope, Ra-226 in drinking water, were also stratified as having elevated radium (≥3 pCi/L) vs. low radium (<3 pCi/L). A linear regression was performed using STATA® generalized linear model (GLM) program to evaluate the probable association between cleft birth defect rates by ZIP codes and concentration of uranium and radium via domestic water supply. These rates were further adjusted for potentially confounding variables such as maternal age, education, occupation, and ethnicity. ^ Results This study showed higher rates of cleft births in ZIP codes classified as having high combined uranium versus ZIP codes having low combined uranium. The model was further improved by adding radium stratified as explained above. Adjustment for maternal age and ethnicity did not substantially affect the statistical significance of uranium or radium concentrations in household water supplies. ^ Conclusion Although this study lacks individual exposure levels, the findings suggest a significant association between elevated uranium and radium concentrations in tap water and high orofacial birth defect rates by ZIP codes. Future case-control studies that can measure individual exposure levels and adjust for contending risk factors could result in a better understanding of the exposure-disease association.^

Sediment and porewater geochemistry of core GIK13725, Wester Baltic Sea

Based on chemical-thermodynamical balances the species distributions and mineral stabilities of the chemical compositions of the pressed pore solutions taken from a Baltic Sea mudsediment are evualuated by means of the computer program WATEQF (PLUMMER et al., 1976). According to these evaluations calcite and aragonite are to be found in supersaturation throughout the whole profile. The SiO2 concentration of the pore solutions is mainly controlled by the dissolutions of amorphous silica present in minimal undersaturation. By means of SEM pictures idiomorph quartzcrystals as well as presumptive clay minerals transformation and reformations could be proved as stable transformation phases of the dissolved SiO2 species. The stability of the solid phases containing Al-components as of feldspars and clayminerals decreases with increasing dept and is mainly controlled by AIF3 complexes higher concentrated with increasing depth.

Estructuras espaciales desmontables y desplegables. Estudio de la obra del arquitecto Emilio Pérez Pinero.

La presente tesis estudia las realizaciones del arquitecto Emilio Pérez Pinero, todas dentro de las estructuras espaciales de barras desmontables y desplegables, elabora la documentación que hace transmisible su investigación y generaliza el estudio del comportamiento en la parcela de las desplegables. La obra de este arquitecto forma un conjunto original, atractivo y sin continuadores, y por otra parte, no abundan las" investigaciones sobre este tipo de estructuras ( mucho menos las realizaciones), en las que hay que resolver tanto su definición como su movilidad y comportamiento estructural. El contenido de la parte correspondiente a las estructuras desmontables se limita a las cúpulas reticuladas de una capa, con el sistema de reticulado y montaje ideado por Pinero, por considerar que se debe documentar su aportación pero no incidir mas en un campo de investigación que cuenta con abundantes estudios. Se aporta la solución matemática y un programa de ordenador para la definición geométrica completa del reticulado empleado. Las estructuras desplegables se caracterizan por el empleo de barras dispuestas en "x" en el espesor de la estructura, con generación de superficies tanto planas como curvas. En ambos casos se analiza la movilidad en fase de mecanismo, tanto a las soluciones de Pinero como a las complementarlas que se exponen. Se estudian las relaciones geométricas que deben de cumplirse para que sea posible el movimiento de las barras, relaciones particularmente complejas en las desplegables según superficies esféricas, y que determinan su definición geométrica. En la fase de estructura, además de analizar lo realizado por Pinero, documentando y definiendo sus componentes, se proponen varias estructuras posibles para cada mecanismo, y se desarrolla en detalle el tipo de los emparrillados de canto constante, donde se incluye un estudio comparativo de nueve variantes distintas. Se muestra el amplio campo de uso posible para estas estructuras. ABSTRACT The • present doctoral dissertation studies the work of de spanish architect Emilio Pérez Pinero, all of it within de field of spatial demountable and deployable structures. This contribution compiles the necessary documentation for research in this field and, besides, generalizes the theoretical background for the analysis of this type of structures. Pérez Pinero's contributions are original and attractive, but, so far, he has not any followers ; on the other hand research in this field is scarce (much less actual realizations). In the part corresponding to demountable structures the research is limited to reticulated domes of only one layer, following Pérez Pinero's sys~ tem, trying to give a comprehensive documentation of it. The mathematical solution is given and so is a computer program for the complete definition of the geometry of the structure. One characteristic of deployable structures is the use of struts placed - formix "X" in the thickness of the structure, making possible the generation of plañe as well as curved surfaces. In both cases, the operation in the phase of mechanism is studied, both fot Pinero's solution and for the other schemes presented. The geometrical relationships that must be maintained in order to guarantee strut's movements, are studied; these relationships are particularly complex in the case of spherical surfaces, and, in this last casey determine completely its geometrical definition. In regard of the structure behaviour, besides analysing Pinero's works, a variety of solutions are proposed for each mechanism. Particularly, the configuration for double layer grids of constant thickness is developed with great detall, and a comparative study of nine different solutions of this special case is included. A wide range of the possible applications of this structural type is shown.

P-Adaptive Boundary Elements

This paper presents the implementation of an adaptive philosophy to plane potential problems, using the direct boundary element method. After some considerations about the state of the art and a discussion of the standard approach features, the possibility of separately treating the modelling of variables and their interpolation through hierarchical shape functions is analysed. Then the proposed indicators and estimators are given, followed by a description of a small computer program written for an IBM PC. Finally, some examples show the kind of results to be expected.

Improvements for B.E.M. implementation in micros

This paper presents a computer program developed to run in a micro I.B.M.-P.C. wich incorporates some features in order to optimize the number of operations needed to compute the solution of plane potential problems governed by Laplace's equation by using the Boundary Integral Equation Method (B.I.E.M.). Also incorporated is a routine to plot isolines inside the domain under study.

Estimación de la peligrosidad sísmica mediante protocolos de juicios de expertos

Este trabajo estudia la aportación que los métodos de agregación de juicios de expertos pueden realizar en el cálculo de la peligrosidad sísmica de emplazamientos. Se han realizado cálculos en dos emplazamientos de la Península Ibérica: Mugardos (La Coruña) y Cofrentes (Valencia) que están sometidos a regímenes tectónicos distintos y que, además, alojan instalaciones industriales de gran responsabilidad. Las zonas de estudio, de 320 Km de radio, son independientes. Se ha aplicado un planteamiento probabilista a la estimación de la tasa anual de superación de valores de la aceleración horizontal de pico y se ha utilizado el Método de Montecarlo para incorporar a los resultados la incertidumbre presente en los datos relativos a la definición de cada fuente sismogenética y de su sismicidad. Los cálculos se han operado mediante un programa de ordenador, desarrollado para este trabajo, que utiliza la metodología propuesta por el Senior Seismic Hazard Analysis Commitee (1997) para la NRC. La primera conclusión de los resultados ha sido que la Atenuación es la fuente principal de incertidumbre en las estimaciones de peligrosidad en ambos casos. Dada la dificultad de completar los datos históricos disponibles de esta variable se ha estudiado el comportamiento de cuatro métodos matemáticos de agregación de juicios de expertos a la hora de estimar una ley de atenuación en un emplazamiento. Los datos de partida se han obtenido del Catálogo de Isosistas del IGN. Los sismos utilizados como variables raíz se han elegido con el criterio de cubrir uniformemente la serie histórica disponible y los valores de magnitud observados. Se ha asignado un panel de expertos particular a cada uno de los dos emplazamientos y se han aplicado a sus juicios los métodos de Cooke, equipesos, Apostolakis_Mosleh y Morris. Sus propuestas se han comparado con los datos reales para juzgar su eficacia y su facilidad de operación. A partir de los resultados se ha concluido que el método de Cooke ha mostrado el comportamiento más eficiente y robusto para ambos emplazamientos. Este método, además, ha permitido identificar, razonadamente, a aquellos expertos que no deberían haberse introducido en un panel. The present work analyses the possible contribution of the mathematical methods of aggregation in the assessment of Seismic Hazzard. Two sites, in the Iberian Peninsula, have been considered: Mugardos ( La Coruña) and Cofrentes (Valencia).Both of them are subjected to different tectonic regimes an both accommodate high value industrial plants. Their areas of concern, with radius of 320 Km, are not overlapping. A probabilistic approach has been applied in the assessment the annual probability of exceedence of the horizontal peak acceleration. The Montecarlo Method has allowed to transfer the uncertainty in the models and parameters to the final results. A computer program has been developed for this purpose. The methodology proposed by the Senior Seismic Analysis Committee (1997) for the NRC has been considered. Attenuation in Ground motion has been proved to be the main source of uncertainty in seismic hazard for both sites. Taking into account the difficulties to complete existing historical data in this subject the performance of four mathematical methods of aggregation has been studied. Original data have been obtained from the catalogs of the Spanish National Institute of Geography. The seismic events considered were chosen to cover evenly the historical records and the observed values of magnitude. A panel of experts have been applied to each site and four aggregation methods have been developed : equal weights, Cooke, Apostolakis-Mosleh and Morris The four proposals have been compaired with the actual data to judge their performance and ease of application. The results have shown that the Method of Cooke have proved the most efficient and robust for both sites. This method, besides, allow the reasoned identification of those experts who should be rejected from the panel