Heavy metal nutrients in tomato plants cultivated in soil amended with biosolid composts

The use of biosolids in horticulture could contribute to recycle residues produced by men. This study analyzed concentrations of Cu, Mn and Zn in the compost during fermentation, in the soil amended with the composts and in the tomato plant materials. Five composts were produced using sugar-cane bagasse, biosolid and cattle manure in the proportions: 75-0-25; 75-12.5-12.5; 75-25-0; 50-50- 0 and 0-100-0 (composts with 0; 12.5; 25; 50 and 100% biosolid), respectively. These composts were used in an experiment with 6 treatments (the 5 composts and a control with mineral fertilization) in a design of randomized blocks with a split plot design. The control and the treatment of 0% biosolid received inorganic nitrogen. All the treatments received the same amount of N, P and K. Two tomato plants were cultivated in each 24 L pot, in a greenhouse at the Technology Department of the Faculdade de Ciências Agrárias e Veterinárias of the Universidade Estadual Paulista in Jaboticabal County, São Paulo State, Brazil. The concentrations of Cu, Mn and Zn were evaluated in the compost 7, 27, 57, 97 and 127 days after composting began, in the soil 0 and 164 days after the compost applied, and in the plants. Compost, soil and plant samples were subjected to digestion with HNO3, H 2O2 and HCl and the metals were determined by AAS. There were positive and significant correlations between Mn in the compost and Mn uptake by the plant (0.46 p>0.05), and between Zn in the compost and Zn concentration in the plant (0.78 p>0.05). Cu, Mn and Zn concentrations increased during composting. The biosolid in the compost supplied Cu and Zn to tomato plants, and the cattle manure supplied Mn to the plants.

Genetic control of fruit-setting percentage of tomatoes tolerant to high temperatures

The aim of present work was to study, through means and variances of generations, the genetic control of fruit-set percentage in tomatoes, in a biparental cross between line Jab-95 (resistant to fruit-set) and 'Caribe' cultivar (susceptible to fruit-set) after being subjected to high temperatures. F1, F2, and backcross generations for both parents (P 1, P2) were produced in a greenhouse at FCAVUNESP, Jaboticabal-SP, Brazil. A randomized complete block experimental design with four replications was used to evaluate the different generations. Estimates of genetic parameters were obtained according to Mather and Jinks (1982). An additive-dominant model was fitted to explain the variation observed. The mean degree of dominance (0.54), indicated incomplete dominance in the direction of increasing fruit-set percentage at high temperatures. The genetic control of fruit-set percentage, at high temperatures, for tomato was found to be oligogenic or polygenic (3.54 genes). The heritability in a limited sense was 83.91%, suggesting that the selection of individuals based on the characteristic evaluated can be efficient.

Comportamento do cafeeiro apoatã em consórcio com culturas anuais

This study was conducted in Adamantina, region of Alta Paulista, São Paulo State, Brazil, from 1989 to 1993. Yield of Apoatã coffee (Coffea canephora Pierre ex Froehner) was evaluated during four years of intercropping with five plant species: IAC 20 - cotton (Gossypium hirsutum L.); cv. Tatu - peanut (Arachis hypogaea L.); IAC 165 - rice (Oryza sativa L.); cv. Guarani - castor bean (Ricinus communis L.) and IAC 100-B - corn (Zea mays L.). The crops were seeded 50 cm apart from coffee canopy. The treatments were arranged in randomized complete block design with five replications. Yield was significantly decreased when coffee was intercropped with castor bean, corn, cotton and peanut, but height and diameter of orthotropic branches were not affected. Linear correlation analysis showed that coffee yield was inversely correlated with the dry biomass of the intercrops.

Yield and fruit size distribution of processing tomato cultivars

The productivity and fruit size distribution of 28 processing tomato cultivars were analyzed to determine the ones with potential for fresh market. The experiment was done in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), in a Haplorthox soil, from June to December. The cultivars H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511 were evaluated. The experimental design was randomized blocks, with four repetitions, and five plants per experimental unit. Fruits harvested from each experimental unit were counted, classified by transversal diameter (large, medium, small, very small and cull) and then weighed. Cultivars AG 72, H 9498, Hypeel 45, RPT 1095 and Curicó yielded more than 70 fruits per plant, on average. The total production per plant of cultivars AG 72, H 9498, Hypeel 45, H 7155, Hypeel 108, Halley, Hitech, RPT 1095, H 9494, H 9036 and Curicó was greater than 4 kg. Considering the weight of large and medium fruits, categories which are important for fresh market, the cultivars H 2710, Botu 13, U 573, Hypeel 45, Yuba, RPT 1294 and Ipa 6 presented values above 50% for production.

Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Physical-chemical characterization of processing tomato fruit

Fruit of 28 tomato cultivars for industrial processing were characterized to identify cultivars with potential for in natura consumption. The experiment was carried out in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), on a Haplorthox soil during June-December. The cultivars used in this study were: H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511. The experimental design was randomized blocks, replicated four times. Ten fruits per plot were analyzed, evaluating the following characteristics: shape (oblong or round); length and diameter (mm); external and internal coloration; presence of fissures; number of loci; pulp thickness (mm); soluble solids content (Brix) and total acidity. Only cultivars Hypeel 108, AG 72, NK 1570, RPT 1570 had oblong fruit. Cultivars which had pulp thicker than 5.5 mm, a characteristic which is directly related to fruit yield for industrial purposes were: Ipa 6, Andino, U 646, H 9553, RPT 1294 and Hypeel 108. Cultivars Ipa 6 and Andino also presented elevated values for length, diameter and pulp thickness, indicating them as quality material for industry or, alternatively, for in natura market. Among the cultivars which presented better values for acidity (higher or equal to 0.3 g citric acid 100 g-1) were RPT 1095, AG 45, H 9553 and Hypeel 45.

Métodos de coleta de fezes e determinação dos coeficientes de digestibilidade da fração protéica e da energia de alimentos para o pacu, Piaractus mesopotamicus (Holmberg, 1887)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Non-nutrient heavy metals in tomato plants cultivated in soil amended with biosolid and sugar-cane bagasse compost

In this study, non-nutrient heavy metal concentrations (Cd, Cr, Ni and Pb) were measured in composts during the composting process, in compost/Red-yellow Latosol mixtures, and in tomato plants. Composts were produced using sugar-cane bagasse, biosolids and cattle manure in the proportions 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 or 0-100-0 (composts with 0, 12.5, 25, 50 and 100% biosolids). The composts were applied to the soil, in 6 treatments and a control (mineral fertilization). Control and the 0% biosolids treatments received inorganic nitrogen and all the treatments received the same amount of N, P and K. Tomato plants were cultivated in 24-L pots, in a green house in Jaboticabal, SP, Brazil. The experiment had a split plot design, in randomized blocks. Cadmium, Cr, Ni and Pb concentrations were determined during the composting process (7, 27, 57, 97 and 127 days after compost mounting), in soil (0 and 164 days after mixing) and plants. The samples were subjected to digestion with HNO 3, H2O2 and HCl and the metals were determined by AAS. Negative correlations were observed between Cd, Cr and Pb in the compost and Cd, Cr and Pb plant uptake, as well as Ni in the compost and Ni concentration in the plants. The concentrations of Cd, Cr, Ni and Pb increased during composting. Only Cd levels increased when compost was applied to the soil. The roots accumulated Cr, Ni and Pb, the stems and leaves, Cd and Ni and the fruits did not accumulate any of the metals studied. The composts with biosolids did not increase Cd, Cr, Ni and Pb uptake by plants.

Fatores que afetam a oviposição de Bemisia tabaci (Genn.) biótipo B (Hemiptera: Aleyrodidae) na cultura algodoeira

The objective of this work was to evaluate the oviposition behavior of the whitefly Bemisia tabaci (Genn.) biotype B in relation to leaf position, plant age, and adult density on cotton plants. The genotype IAC 22 was used to do the tests. In free-choice tests, 20, 30 and 40 day-old plants were used to evaluate age efects and 40 day-old plants to study egg distribution in the plant and on the leaf surface. In a no-choice test, 20 day-old plants were used to evaluate densities of 50, 100 and 150 adults per plant. The lobe areas on the leaf surface and apical leaves were preferred for whitefly egg laying and therefore more suitable for egg sampling in cotton plants. The 20 day-old plants were preferred for oviposition, and the densities of 100 and 150 adults per plant ensured the number of eggs enough to discriminate cotton genotypes with different whitefly resistance degrees.

Efeito da calagem e sulfato de amônio no algodão. I - Transporte de cátions e ânions no solo

Applying lime on the soil surface in soils managed under no-tillage has caused an excess of basic cations in the most superficial layers of the soil profile. On the other hand, subsoil acidity is considered a constraint to the development of deep plant roots. The objective of this study was to evaluate Ca 2+, Mg 2+, NO 3- and SO 4 2- leaching in the soil profile as affected by liming and top dressing nitrogen fertilization in cotton, grown with straw cover on the soil surface. Cotton plants (Gossypium hirsutum) were grown for 60 days in PVC columns filled with a Distroferric Red Latosol (sand loam Rhodic Oxisol) with liming applied over the straw on the soil surface, incorporated liming 0-20 cm deep, or without liming. Nitrogen was applied at rates of 0, 50, 100 and 150 kg ha -1 as ammonium sulfate. The PVC columns were set up in layers of 0-5, 5-10, 10-20, 20-30 and 30-30 cm, totaling 15.71 dm 3. The ammonium sulfate application caused intense leaching of SO 4 2- in the soil, irrespective of the lime application method. Liming increased the concentration of NO 3 in the 0-20 cm soil layer, whereas the correction of the soil acidity did not affect the NO 3- concentration in the 30-50 cm soil layer. The influence of ammonium sulfate on Ca 2+ leaching below 20 cm was only observed in the soil with incorporated lime. Nitrogen application resulted in extensive Mg 2+ leaching from the soil, regardless of the lime application method. In the soil layer below 30 cm, SO 4 2- presented a higher correlation than NO 3- in the formation of ionic pairs with Ca 2+ and Mg 2+.

Central nifedipine-induced alterations in salivary flow and compounds: Role of nitric oxide

The aim of this study was to examine the role of nifedipine and Nitric Oxide (NO) on salivary flow and compounds (salivary amylase, saliva total proteins, saliva calcium, sodium and potassium). Male Holtzman rats weighting 200-250 g were anesthetized with zoletil 50 mg kg -1 (tiletamine chloridrate 125.0 mg and zolazepan chloridrate 125.0 mg) into quadriceps muscle and stainless steel cannulas were implanted into their lateral ventricle of the brain (LV). Animals in divided group were injected with nifedipine (50 μg μL -1) alone and in combination with 7-nitroindazol (7-NIT) (40 μg μL -1), neuronal NO Sinthase Inhibitor (nNOSI) and Sodium Nitroprussate (SNP) (30 μg μL -1) NO donor agent. As a secretory stimuli, pilocarpine dissolved in isotonic was administered intraperitoneally (ip) at a dosage of 10 mg kg -1 body weight. Saliva was collected for 7 min with four cotton balls weighing approximately 20 mg each, two of which were placed on either side of the oral cavity, with the other two placed under the tongue. Nifedipine treatment induced a reduction in saliva secretion rate and concentration of amylase, total protein and calcium without changes in sodium and potassium concentration in comparison with controls. Co-treatment of animals with nifedipine and SNP retained flow rate and concentration of amylase, total protein and calcium in normal levels. Co-treatment of animals with nifedipine and 7-NIT potentiated the effect of nifedipine on the reduction of saliva secretion and concentrations of amylase, total protein and calcium. Nifedipine (dihydroperidine) calcium-channel blocker widely in use is associated with salivary dysfunction acting in the central nervous system structures. NO might be the mechanism for protective effect against the nifedipine-induce salivary dysfunction, acting in the CNS. © 2006 Asian Network for Scientific Information.

Productivity of cherry tomatoes under protected cultivation carried out with different types of pruning and spacing

The aim of the study was to evaluate production and determine the level of total soluble solids for cherry tomatoes, under protected cultivation carried out with different types of spacing and pruning. The experiment was performed according to a randomized block design in a 2×2 factorial scheme, with two types of spacing between plants and two types of pruning, and with five repetitions. The cultivar 'Sindy' (De Ruiter) was utilized. Each experimental parcel contained seven plants, and fruits were collected from the five central plants. The seedlings were produced in Styrofoam trays of 128 cells and transplanted at 33 days after planting using two types of spacing between plants (0.3 and 0.5 m) and 1 m spacing between rows. The plants were grown as single-or double-stem form and staked individually. The parameters evaluated were the number of fruit per plant, fresh weight of fruit and the level of total soluble solids expressed in °Brix. There was no evidence of significant interaction between the treatments. For fresh weight of fruit per plant, there was a significant effect when the plants were grown with a spacing of 1 × 0.5 m, with 4.12 kg per plant, compared to a production of 3.00 kg per plant with a spacing of 1 × 0.3 m. With regard to the number of fruit per plant, a significant difference was seen between the two types of spacing, where a spacing of 1 × 0.3 m yielded a lower number of fruit per plant (188.8), compared to that observed with a spacing of 1 × 0.5 m (238.1). With regard to the two types of pruning, there was a significant effect for only the number of fruit per plant, where the mean number of fruit was 188.4 with one stem and 238.4 with two stems. No significant difference was observed between the treatments for the level of total soluble solids. It is concluded that for the cultivar 'Sindy', under protected cultivation, production is better with a spacing of 0.5 m between plants and the use of two stems per plant.

Condutividade hidráulica e resistência à penetraçao do solo influenciada por diferentes sistemas de manejo

Soil management measures that increase the efficiency of organic matter cycling and maintain favorable soil structure are needed for improving soil quality. On the other hand, soil structure degradation due to inadequate soil management systems is widespread. Among the indicators of soil physical quality, saturated hydraulic conductivity and penetration resistance are thought to be sensitive to soil management system. The aim of this work was to study the influence of soil tillage system and organic fertilization on selected soil physical properties after the first year of treatment. The field work was conducted in Selviria, MS, Brazil on an Oxisol. The experimental design was randomized complete blocks with split-plots, with 12 treatments and 4 repetitions. Tillage treatments included conventional ploughing (CT) and direct drilling (DD). Fertilizer treatments were: 1) manure, 2) manure plus mineral, 3) traditional mineral 4) plant residues of Crotalaria juncea, 5) plant residues of Pennisetum americanum and 6) control plot. The plots were cropped to bean in winter and to cotton in summer, and both cultures were irrigated. After one year no significant differences between treatments in mechanical resistance and porosity were found. However, saturated hydraulic conductivity and infiltration were higher in the conventional tillage treatment at the 0.00-0.10 m depth. Moreover, an improvement in soil physical condition by organic fertilizers was shown.

Comparación de tres métodos para estimar estabilidad del rendimiento en nueve variedades de algodón

With the purpose of selecting and recommending promissory cultivars of cotton, Gossypium hirsutum (L) with high yield potential and stability, for crop areas in Venezuela, the yield (seed included) of nine cotton varieties was evaluated. The data from the 1995-96 and 1996-97 cycles was used. The experimental design was a randomized completed block design with four repetitions on twelve environments. Parameters of stability offered by the methods of Eberhart and Russell, (1966), Cruz et al. (1989) and the AMMI model were estimated and compared to determine the best method or combination. There was no coincidence between the best yield varieties, Unellez-2 and the commercial variety Delta Pine 16, in relation to stability criteria. According to Eberhart and Russell, these were classified as stable, while according to Cruz et al. they were adaptive to favorable environments and according to AMMI they were unstable with high interaction,.Of the three methods studied, the AMMI model allowed associating the response of high yield varieties to specific environments, gave more information and was easier to interpret.