Active Learning in Nursing Education

ALINE is a pedagogical model developed to aid nursing faculty transition from passive to active learning. Based on constructionist theory, ALINE serves as a tool for organizing curriculum for online and classroom based interaction and permits positioning the student as the active player and the instructor, the facilitator to nursing competency.

Modified 3+3 design for phase I clinical trials

Phase I clinical trial is mainly designed to determine the maximum tolerated dose (MTD) of a new drug. Optimization of phase I trial design is crucial to minimize the number of enrolled patients exposed to unsafe dose levels and to provide reliable information to the later phases of clinical trials. Although it has been criticized about its inefficient MTD estimation, nowadays the traditional 3+3 method remains dominant in practice due to its simplicity and conservative estimation. There are many new designs that have been proven to generate more credible MTD estimation, such as the Continual Reassessment Method (CRM). Despite its accepted better performance, the CRM design is still not widely used in real trials. There are several factors that contribute to the difficulties of CRM adaption in practice. First, CRM is not widely accepted by the regulatory agencies such as FDA in terms of safety. It is considered to be less conservative and tend to expose more patients above the MTD level than the traditional design. Second, CRM is relatively complex and not intuitive for the clinicians to fully understand. Third, the CRM method take much more time and need statistical experts and computer programs throughout the trial. The current situation is that the clinicians still tend to follow the trial process that they are comfortable with. This situation is not likely to change in the near future. Based on this situation, we have the motivation to improve the accuracy of MTD selection while follow the procedure of the traditional design to maintain simplicity. We found that in 3+3 method, the dose transition and the MTD determination are relatively independent. Thus we proposed to separate the two stages. The dose transition rule remained the same as 3+3 method. After getting the toxicity information from the dose transition stage, we combined the isotonic transformation to ensure the monotonic increasing order before selecting the optimal MTD. To compare the operating characteristics of the proposed isotonic method and the other designs, we carried out 10,000 simulation trials under different dose setting scenarios to compare the design characteristics of the isotonic modified method with standard 3+3 method, CRM, biased coin design (BC) and k-in-a-row design (KIAW). The isotonic modified method improved MTD estimation of the standard 3+3 in 39 out of 40 scenarios. The improvement is much greater when the target is 0.3 other than 0.25. The modified design is also competitive when comparing with other selected methods. A CRM method performed better in general but was not as stable as the isotonic method throughout the different dose settings. The results demonstrated that our proposed isotonic modified method is not only easily conducted using the same procedure as 3+3 but also outperforms the conventional 3+3 design. It can also be applied to determine MTD for any given TTL. These features make the isotonic modified method of practical value in phase I clinical trials.^

Comparison of machine learning approaches and statistical methods for estimation of airborne chemical exposures

Accurate quantitative estimation of exposure using retrospective data has been one of the most challenging tasks in the exposure assessment field. To improve these estimates, some models have been developed using published exposure databases with their corresponding exposure determinants. These models are designed to be applied to reported exposure determinants obtained from study subjects or exposure levels assigned by an industrial hygienist, so quantitative exposure estimates can be obtained. ^ In an effort to improve the prediction accuracy and generalizability of these models, and taking into account that the limitations encountered in previous studies might be due to limitations in the applicability of traditional statistical methods and concepts, the use of computer science- derived data analysis methods, predominantly machine learning approaches, were proposed and explored in this study. ^ The goal of this study was to develop a set of models using decision trees/ensemble and neural networks methods to predict occupational outcomes based on literature-derived databases, and compare, using cross-validation and data splitting techniques, the resulting prediction capacity to that of traditional regression models. Two cases were addressed: the categorical case, where the exposure level was measured as an exposure rating following the American Industrial Hygiene Association guidelines and the continuous case, where the result of the exposure is expressed as a concentration value. Previously developed literature-based exposure databases for 1,1,1 trichloroethane, methylene dichloride and, trichloroethylene were used. ^ When compared to regression estimations, results showed better accuracy of decision trees/ensemble techniques for the categorical case while neural networks were better for estimation of continuous exposure values. Overrepresentation of classes and overfitting were the main causes for poor neural network performance and accuracy. Estimations based on literature-based databases using machine learning techniques might provide an advantage when they are applied to other methodologies that combine `expert inputs' with current exposure measurements, like the Bayesian Decision Analysis tool. The use of machine learning techniques to more accurately estimate exposures from literature-based exposure databases might represent the starting point for the independence from the expert judgment.^

Design, synthesis and cellular and molecular pharmacology of 2$\sp\prime$-bromo-4$\sp\prime$-epidaunorubicin (WP401): A novel non-cross-resistant anthracycline antibiotic with the intrinsic ability to circumvent P -glycoprotein-mediated drug resistance

We designed and synthesized a novel daunorubicin (DNR) analogue that effectively circumvents P-glycoprotein (P-gp)-mediated drug resistance. The fully protected carbohydrate intermediate 1,2-dibromoacosamine was prepared from acosamine and effectively coupled to daunomycinone in high yield. Deprotection under alkaline conditions yielded 2$\sp\prime$-bromo-4$\sp\prime$-epidaunorubicin (WP401). The in vitro cytotoxicity and cellular and molecular pharmacology of WP401 were compared with those of DNR in a panel of wild-type cell lines (KB-3-1, P388S, and HL60S) and their multidrug-resistant (MDR) counterparts (KB-V1, P388/DOX, and HL60/DOX). Fluorescent spectrophotometry, flow cytometry, and confocal laser scanning microscopy were used to measure intracellular accumulation, retention, and subcellular distribution of these agents. All MDR cell lines exhibited reduced DNR uptake that was restored, upon incubation with either verapamil (VER) or cyclosporin A (CSA), to the level found in sensitive cell lines. In contrast, the uptake of WP401 was essentially the same in the absence or presence of VER or CSA in all tested cell lines. The in vitro cytotoxicity of WP401 was similar to that of DNR in the sensitive cell lines but significantly higher in resistant cell lines (resistance index (RI) of 2-6 for WP401 vs 75-85 for DNR). To ascertain whether drug-mediated cytotoxicity and retention were accompanied by DNA strand breaks, DNA single- and double-strand breaks were assessed by alkaline elution. High levels of such breaks were obtained using 0.1-2 $\mu$g/mL of WP401 in both sensitive and resistant cells. In contrast, DNR caused strand breaks only in sensitive cells and not much in resistant cells. We also compared drug-induced DNA fragmentation similar to that induced by DNR. However, in P-gp-positive cells, WP401 induced 2- to 5-fold more DNA fragmentation than DNR. This increased DNA strand breakage by WP401 was correlated with its increased uptake and cytotoxicity in these cell lines. Overall these results indicate that WP401 is more cytotoxic than DNR in MDR cells and that this phenomenon might be related to the reduced basicity of the amino group and increased lipophilicity of WP401. ^

Learning -dependent plasticity of movement representations in the primate primary motor cortex

Primary motor cortex (M1) is involved in the production of voluntary movement and contains a complete functional representation, or map, of the skeletal musculature. This functional map can be altered by pathological experiences, such as peripheral nerve injury or stroke, by pharmacological manipulation, and by behavioral experience. The process by which experience-dependent alterations of cortical function occur is termed plasticity. In this thesis, plasticity of M1 functional organization as a consequence of behavioral experience was examined in adult primates (squirrel monkeys). Maps of movement representations were derived under anesthesia using intracortical microstimulation, whereby a microelectrode was inserted into the cortex to electrically stimulate corticospinal neurons at low current levels and evoke movements of the forelimb, principally of the hand. Movement representations were examined before and at several times after training on behavioral tasks that emphasized use of the fingers. Two behavioral tasks were utilized that dissociated the repetition of motor activity from the acquisition of motor skills. One task was easy to perform, and as such promoted repetitive motor activity without learning. The other task was more difficult, requiring the acquisition of motor skills for successful performance. Kinematic analysis indicated that monkeys used a consistent set of forelimb movements during pellet extractions. Functional mapping revealed that repetitive motor activity during the easier task did not produce plastic changes in movement representations. Instead, map plasticity, in the form of selective expansions of task-related movement representations, was only produced following skill acquisition on the difficult task. Additional studies revealed that, in general, map plasticity persisted without further training for up to three months, in parallel with the retention of task-related motor skills. Also, extensive additional training on the small well task produced further improvements in performance, and further changes in movement maps. In sum, these experiments support the following three conclusions regarding the role of M1 in motor learning. First, behaviorally-driven plasticity is learning-dependent, not activity-dependent. Second, plastic changes in M1 functional representations represent a neural correlate of acquired motor skills. Third, the persistence of map plasticity suggests that M1 is part of the neural substrate for the memory of motor skills. ^

Educational orientation regarding vocabulary and literacy access : Evaluating the impact of an intervention program designed to promote early learning at home

El estudio evalúa el impacto de un programa de promoción del desarrollo lingüístico y cognitivo para niños de 5 años implementado según dos modalidades: una que implicó acciones de alfabetización familiar en los hogares de los niños (modalidad intensiva) y otra que incluyó la participación de los niños en las salas de jardín de infantes (modalidad extensiva). La evaluación del impacto se realizó por medio de un diseño pre-test ? post-test. Se tomaron pruebas de vocabulario receptivo (VR), producción de categorías (PC) y escritura a una muestra de 214 niños participantes de la modalidad intensiva, 69 participantes de la modalidad extensiva y un grupo control de no participó del programa (49 niños). Los resultados mostraron que la participación en la modalidad intensiva implicó un mayor incremento en las habilidades infantiles de VR, PC que en la modalidad extensiva. A su vez ambas modalidades experimentales mostraron un mayor incremento en las variables examinadas respecto de las observadas en el grupo control. No se detectaron efectos de la escolaridad de la madre y la asistencia previa al jardín. Los resultados mostraron correlaciones significativas entre todas las variables analizadas y el valor predictivo de los puntajes en VR a principio de año respecto de los puntajes en VR y escritura a fin de año.

Society, family and learning. The role of home literacy environments

This paper explores the relation between society, family, and learning. In particular, it addresses the features of home literacy environments in low income families and their impact on children's pre-literacy skills and knowledge. Sixty-two four/five-year-old children and their mothers were randomly selected for this study. The mothers were interviewed using an adaptation of a family literacy environment survey (Whitehurst, 1992). The children were assessed with specific tests to examine the scope of their 'early literacy'. The results revealed significant variability in the features and practices of home literacy environments as well as in the children's emerging pre-literacy skills and knowledge. The correlation between the two variables shows low to moderate statistical significance. The implications of such findings are discussed. Additionally, the purpose of isolating relevant features of the children and their home environments is to identify specific indicators related to the literacy fostering process. Ultimately, the goal is to design adequate, timely, and systematic intervention strategies aimed at preventing difficulties related to written language learning in children that could be considered at risk.

Educational orientation regarding vocabulary and literacy access : Evaluating the impact of an intervention program designed to promote early learning at home

El estudio evalúa el impacto de un programa de promoción del desarrollo lingüístico y cognitivo para niños de 5 años implementado según dos modalidades: una que implicó acciones de alfabetización familiar en los hogares de los niños (modalidad intensiva) y otra que incluyó la participación de los niños en las salas de jardín de infantes (modalidad extensiva). La evaluación del impacto se realizó por medio de un diseño pre-test ? post-test. Se tomaron pruebas de vocabulario receptivo (VR), producción de categorías (PC) y escritura a una muestra de 214 niños participantes de la modalidad intensiva, 69 participantes de la modalidad extensiva y un grupo control de no participó del programa (49 niños). Los resultados mostraron que la participación en la modalidad intensiva implicó un mayor incremento en las habilidades infantiles de VR, PC que en la modalidad extensiva. A su vez ambas modalidades experimentales mostraron un mayor incremento en las variables examinadas respecto de las observadas en el grupo control. No se detectaron efectos de la escolaridad de la madre y la asistencia previa al jardín. Los resultados mostraron correlaciones significativas entre todas las variables analizadas y el valor predictivo de los puntajes en VR a principio de año respecto de los puntajes en VR y escritura a fin de año.

Society, family and learning. The role of home literacy environments

This paper explores the relation between society, family, and learning. In particular, it addresses the features of home literacy environments in low income families and their impact on children's pre-literacy skills and knowledge. Sixty-two four/five-year-old children and their mothers were randomly selected for this study. The mothers were interviewed using an adaptation of a family literacy environment survey (Whitehurst, 1992). The children were assessed with specific tests to examine the scope of their 'early literacy'. The results revealed significant variability in the features and practices of home literacy environments as well as in the children's emerging pre-literacy skills and knowledge. The correlation between the two variables shows low to moderate statistical significance. The implications of such findings are discussed. Additionally, the purpose of isolating relevant features of the children and their home environments is to identify specific indicators related to the literacy fostering process. Ultimately, the goal is to design adequate, timely, and systematic intervention strategies aimed at preventing difficulties related to written language learning in children that could be considered at risk.

Educational orientation regarding vocabulary and literacy access : Evaluating the impact of an intervention program designed to promote early learning at home

El estudio evalúa el impacto de un programa de promoción del desarrollo lingüístico y cognitivo para niños de 5 años implementado según dos modalidades: una que implicó acciones de alfabetización familiar en los hogares de los niños (modalidad intensiva) y otra que incluyó la participación de los niños en las salas de jardín de infantes (modalidad extensiva). La evaluación del impacto se realizó por medio de un diseño pre-test ? post-test. Se tomaron pruebas de vocabulario receptivo (VR), producción de categorías (PC) y escritura a una muestra de 214 niños participantes de la modalidad intensiva, 69 participantes de la modalidad extensiva y un grupo control de no participó del programa (49 niños). Los resultados mostraron que la participación en la modalidad intensiva implicó un mayor incremento en las habilidades infantiles de VR, PC que en la modalidad extensiva. A su vez ambas modalidades experimentales mostraron un mayor incremento en las variables examinadas respecto de las observadas en el grupo control. No se detectaron efectos de la escolaridad de la madre y la asistencia previa al jardín. Los resultados mostraron correlaciones significativas entre todas las variables analizadas y el valor predictivo de los puntajes en VR a principio de año respecto de los puntajes en VR y escritura a fin de año.

Society, family and learning. The role of home literacy environments

This paper explores the relation between society, family, and learning. In particular, it addresses the features of home literacy environments in low income families and their impact on children's pre-literacy skills and knowledge. Sixty-two four/five-year-old children and their mothers were randomly selected for this study. The mothers were interviewed using an adaptation of a family literacy environment survey (Whitehurst, 1992). The children were assessed with specific tests to examine the scope of their 'early literacy'. The results revealed significant variability in the features and practices of home literacy environments as well as in the children's emerging pre-literacy skills and knowledge. The correlation between the two variables shows low to moderate statistical significance. The implications of such findings are discussed. Additionally, the purpose of isolating relevant features of the children and their home environments is to identify specific indicators related to the literacy fostering process. Ultimately, the goal is to design adequate, timely, and systematic intervention strategies aimed at preventing difficulties related to written language learning in children that could be considered at risk.

Multidisciplinary Learning, Another way of Teaching Maths in Engineering

Multidisciplinary training is widely appreciated in industry and business, and nevertheless usually is not addressed in the early stages of most undergraduate programs. We outline here a multidisciplinary course for undergraduates studying engineering in which mathematics would be the common language, the transverse tool. The goal is motivating students to learn more mathematics and as a result, improve the quality of engineering education. The course would be structured around projects in four branches in engineering: mechanical, electrical, civil and bio-tech. The projects would be chosen among a wide variety of topics in engineering practice selected with the guidance of professional engineers. In these projects mathematics should interact with at least two other basic areas of knowledge in engineering: chemistry, computers science, economics, design or physics.

Simulation techniques for design of overhead conductor rail lines for speeds over 140 km/h

In overhead conductor rail lines, aluminium beams are usually mounted with support spacing between 8 and 12 meters, to limit the maximum vertical deflection in the center of the span. This small support spacing limits the use of overhead conductor rail to tunnels, therefore it has been used almost exclusively in metropolitan networks, with operation speeds below 110 km/h. Nevertheless, due to the lower cost of maintenance required for this electrification system, some railway administrations are beginning to install it in some tunnels on long-distance lines, requesting higher operation speeds [1]. Some examples are the Barcelona and Madrid suburban networks (Spain), and recent lines in Turkey and Malaysia. In order to adapt the design of the overhead conductor for higher speeds (V > 160 km/h), particular attention must be paid to the geometry of the conductor rail in critical zones as overlaps, crossings and, especially, transitions between conductor rail and conventional catenary, since the use of overhead conductor rail is limited to tunnels, as already mentioned. This paper describes simulation techniques developed in order to take into account these critical zones. Furthermore, some specific simulations results are presented that have been used to analyze and optimizes the geometry of this special zones to get a better current collection quality, in a real suburban network. This paper presents the work undertaken by the Railways Technology Research Centre (CITEF), having over 10 years of experience in railways research [1-4].

Integrated learning of computer applications for production engineering

A high productivity rate in Engineering is related to an efficient management of the flow of the large quantities of information and associated decision making activities that are consubstantial to the Engineering processes both in design and production contexts. Dealing with such problems from an integrated point of view and mimicking real scenarios is not given much attention in Engineering degrees. In the context of Engineering Education, there are a number of courses designed for developing specific competencies, as required by the academic curricula, but not that many in which integration competencies are the main target. In this paper, a course devoted to that aim is discussed. The course is taught in a Marine Engineering degree but the philosophy could be used in any Engineering field. All the lessons are given in a computer room in which every student can use each all the treated software applications. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using Ms-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity, ending up with the case of vessel construction. The second part of the course is dedicated to the use of a database manager, Ms-ACCESS, for managing production related information. A series of increasing complexity examples is treated ending up with the management of the pipe database of a real vessel. This database consists of a few thousand of pipes, for which a production timing frame is defined, which connects this part of the course with the first one. Finally, the third part of the course is devoted to the work with FORAN, an Engineering Production package of widespread use in the shipbuilding industry. With this package, the frames and plates where all the outfitting will be carried out are defined through cooperative work by the studens, working simultaneously in the same 3D model. In the paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feed-back from their experience as well as to assess their satisfaction with the learning process. Results from these surveys are discussed in the paper