A model of school managerial control : the systematic analysis of managerial behaviors, processes, and indicators

The theoretical construct of control has been defined as necessary (Etzioni, 1965), ubiquitous (Vickers, 1967), and on-going (E. Langer, 1983). Empirical measures, however, have not adequately given meaning to this potent construct, especially within complex organizations such as schools. Four stages of theory-development and empirical testing of school building managerial control using principals and teachers working within the nation's fourth largest district are presented in this dissertation as follows: (1) a review and synthesis of social science theories of control across the literatures of organizational theory, political science, sociology, psychology, and philosophy; (2) a systematic analysis of school managerial activities performed at the building level within the context of curricular and instructional tasks; (3) the development of a survey questionnaire to measure school building managerial control; and (4) initial tests of construct validity including inter-item reliability statistics, principal components analyses, and multivariate tests of significance. The social science synthesis provided support of four managerial control processes: standards, information, assessment, and incentives. The systematic analysis of school managerial activities led to further categorization between structural frequency of behaviors and discretionary qualities of behaviors across each of the control processes and the curricular and instructional tasks. Teacher survey responses (N=486) reported a significant difference between these two dimensions of control, structural frequency and discretionary qualities, for standards, information, and assessments, but not for incentives. The descriptive model of school managerial control suggests that (1) teachers perceive structural and discretionary managerial behaviors under information and incentives more clearly than activities representing standards or assessments, (2) standards are primarily structural while assessments are primarily qualitative, (3) teacher satisfaction is most closely related to the equitable distribution of incentives, (4) each of the structural managerial behaviors has a qualitative effect on teachers, and that (5) certain qualities of managerial behaviors are perceived by teachers as distinctly discretionary, apart from school structure. The variables of teacher tenure and school effectiveness reported significant effects on school managerial control processes, while instructional levels (elementary, junior, and senior) and individual school differences were not found to be significant for the construct of school managerial control.

Determinants of internal and external R&D offshoring: Evidence from Spanish firms

This paper analyzes the determinants of R&D offshoring of Spanish firms using information from the Panel of Technological Innovation. We find that being an exporter, international technological cooperation, continuous R&D engagement, applying for patents, being a for-eign subsidiary, and firm size are factors that positively affect the decision to offshore R&D. In addition, we find that a lack of financing is an obstacle relatively more important for inde-pendent firms than for firms that belong to business groups. For these latter, we also obtain that the factors that influence the decision to offshore R&D differ depending on whether the firm purchases the R&D services within the group or through the market: a higher degree of importance assigned to internal sources of information for innovation as compared to mar-ket sources increases (decreases) the probability of R&D offshoring only through the group (market).

Emulsion-Based RIR-MAPLE Deposition of Conjugated Polymers: Primary Solvent Effect and Its Implications on Organic Solar Cell Performance.

Emulsion-based, resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) has been demonstrated as an alternative technique to deposit conjugated polymer films for photovoltaic applications; yet, a fundamental understanding of how the emulsion target characteristics translate into film properties and solar cell performance is unclear. Such understanding is crucial to enable the rational improvement of organic solar cell (OSC) efficiency and to realize the expected advantages of emulsion-based RIR-MAPLE for OSC fabrication. In this paper, the effect of the primary solvent used in the emulsion target is studied, both experimentally and theoretically, and it is found to determine the conjugated polymer cluster size in the emulsion as well as surface roughness and internal morphology of resulting polymer films. By using a primary solvent with low solubility-in-water and low vapor pressure, the surface roughness of deposited P3HT and PCPDTBT polymer films was reduced to 10 nm, and the efficiency of P3HT:PC61BM OSCs was increased to 3.2% (∼100 times higher compared to the first MAPLE OSC demonstration [ Caricato , A. P. ; Appl. Phys. Lett. 2012 , 100 , 073306 ]). This work unveils the mechanism of polymer film formation using emulsion-based RIR-MAPLE and provides insight and direction to determine the best ways to take advantage of the emulsion target approach to control film properties for different applications.

Performance of a single liquid column damper for the control of dynamic responses of a tension leg platform

Tuned liquid column dampers have been proved to be successful in mitigating the dynamic responses of civil infrastructure. There have been some recent applications of this concept on wind turbines and this passive control system can help to mitigate responses of offshore floating platforms and wave devices. The control of dynamic responses of these devices is important for reducing loads on structural elements and facilitating operations and maintenance (O&M) activities. This paper outlines the use of a tuned single liquid column damper for the control of a tension leg platform supported wind turbine. Theoretical studies were carried out and a scaled model was tested in a wave basin to assess the performance of the damper. The tests on the model presented in this paper correspond to a platform with a very low natural frequency for surge, sway and yaw motions. For practical purposes, it was not possible to tune the liquid damper exactly to this frequency. The consequent approach taken and the efficiency of such approach are presented in this paper. Responses to waves of a single frequency are investigated along with responses obtained from wave spectra characterising typical sea states. The extent of control is quantified using peak and root mean squared dynamic responses respectively. The tests present some guidelines and challenges for testing scaled devices in relation to including response control mechanisms. Additionally, the results provide a basis for dictating future research on tuned liquid column damper based control on floating platforms.

The effects of agglomeration economies on the productivity of manufacturing local units in Ireland

The purpose of this study is to examine the effects of agglomeration economies on the productivity of manufacturing local units in Ireland. Four types of agglomeration economies are considered in this study. These are internal economies of scale, localization economies, related variety and urbanization economies. This study makes a number of contributions to the literature. Firstly, this is the first study to conduct an investigation of the effects of agglomeration economies on the productivity of manufacturing local units operating in Ireland. Secondly, this study distinguishes between indigenous and foreign-owned local units which is important given the dual nature of the Irish economy (Krugman, 1997). Thirdly, in addition to considering the effects of agglomeration economies, this study examines the impact of spurious agglomeration on the productivity of foreign-owned local units. Using data from the Census of Industrial Local Units and a series of IV GMM estimators to control for endogeneity, the results of the analysis conducted in Chapter 6 reveal that there are differences in the effects of agglomeration economies on the productivity of indigenous and foreign-owned local units. In Chapter 7 the Census of Industrial Local Units is supplemented by additional data sources and more in-depth measures are generated to capture the features of each of the external agglomeration economies considered in this analysis. There is some evidence to suggest that the availability of local inputs has a negative and significant impact on productivity. The NACE based measures of related variety reveal that the availability of local inputs and knowledge spillovers for related sectors have a negative and significant impact on productivity. There is clear evidence to suggest that urbanization economies are important for increasing the productivity of indigenous local units. The findings reveal that a 1% increase in population density in the NUTS 3 region leads to an increase in the productivity of indigenous local units of approximately 0.07% to 0.08%. The results also reveal that there is a significant difference in the effects of agglomeration economies on the productivity of low-tech and medium/high-tech indigenous local units. The more in-depth measures of agglomeration economies used in Chapter 7 are also used in Chapter 8. A series of IV GMM regressions are estimated in order to identify the impact of agglomeration economies and spurious agglomeration on the productivity of foreign-owned local units operating in Ireland. There is some evidence found to suggest that the availability of a pool of skilled labour has a positive and significant on productivity of foreign-owned local units. There is also evidence to suggest that localization knowledge spillovers have a negative impact on the productivity of foreign-owned local units. There is strong evidence to suggest that the availability of local inputs has a negative impact on the productivity. The negative impact is not confined to the NACE 4-digit sector but also extends into related sectors as determined by Porter’s (2003) cluster classification. The cluster based skills measure of related variety has a positive and significant impact on the productivity of foreign-owned local units. Similar to Chapter 7, there is clear evidence to suggest that urbanization economies are important for increasing the productivity of foreign-owned local units. Both the summary measure and each of the more in-depth measures of agglomeration economies have a positive and significant impact on productivity. Spurious agglomeration has a positive and significant impact on the productivity of foreign-owned local units. The results indicate that the more foreign-owned local units of the same nationality in the country the greater the levels of productivity for the local unit. From a policy perspective, urbanization economies are clearly important for increasing the productivity of both indigenous and foreign-owned local units. Furthermore, the availability of a pool of skilled labour appears to be important for increasing the productivity of foreign-owned local units. Another policy implication that arises from these results relates to the differences observed between indigenous local units and foreign-owned local units and also between low-tech and medium/high-tech indigenous local units. These findings indicate that ‘one-size-fits-all’ type policies are not appropriate for increasing the productivity of local units operating in Ireland. Policies should be tailored to the needs of either indigenous or foreign-owned local units and also to specific sectors. This positive finding for own country spurious agglomeration is important from a policy perspective and is one that IDA Ireland should take on board.

Autonomy-Oriented Social Movements and the Politics of Affect

Abstract This dissertation explores damaging tendencies that exist within autonomy-oriented activism in the West. I examine how affect shapes the way that internal conflict is approached and internal strife is dealt with in radical communities. I adopt Sara Ahmed’s proposition “that our emotions are bound up with the securing of the social hierarchy” (Ahmed, 2004b: 4) and given that autonomy-oriented practices are committed to dismantling existing hierarchies, it follows that the less oppressive social configurations sought by autonomous social movements must have different emotional underpinnings. My thesis involves applying critical theory on affect and emotion in social movements to interview data gathered from activists both currently and historically involved in autonomy-oriented social movement communities in Kingston, Ontario. I ask whether anglophone, western-based, autonomy-oriented social movements reproduced understandings of affect/emotions/feelings that underwrite the social order they are working against? I also ask, “how are our emotions conditioned by capitalism?”. The research that I engage with provides responses to these questions by pointing out how the dominant discourse on emotions in the West encourages and informs certain modes of identity production that affect the diminishing and sad practices of autonomy-oriented communities and the (re)production of oppressive practices found in the dominant order. My work critically places this psychologizing view of emotions, and its damaging effects on resistance, within the context of neoliberal capitalism. I argue that the way we understand the politics of affect is an important dimension of radical struggle, and will inform and impact upon our individual and collective capacities to respond to, and refuse to reproduce relations of control and domination. I look for an understanding of “why” and to “what extent” these determinations exists, and look for hope in a politics of affect which supports an autonomy-oriented ethic.

Interface of the Environment and Occurrence of Botrytis cinerea in Pre-symptomatic Tomato Crops

Botrytis cinerea (Grey mould) is a necrotrophic fungus infecting over 230 plant species worldwide. It can cause major pre- and post-harvest diseases of many agronomic and horticultural crops. Botrytis cinerea causes annual economic losses of 10–100 billion US dollars worldwide and instability in the food supply (Jin and Wu, 2015). Grey mould losses, either at the farm gate or later in the food chain, could be reduced with improved knowledge of inoculum availability during production. In this paper, we report on the ability to monitor Botrytis spore concentration in glasshouse tomato production ahead of symptom development on plants. Using a light weight and portable air sampler (microtitre immunospore trap) it was possible to quantify inoculum availability within hours. Also, this study investigated the spatial aspect of the pathogen with an increase of B. cinerea concentration in bio-aerosols collected in the lower part of the glasshouse (0.5 m) and adjacent to the trained stems of the tomato plants. No obvious relationship was observed between B. cinerea concentration and the internal glasshouse environmental parameters of temperature and relative humidity. However the occurrence of higher outside wind speeds did increase the prevalence of B. cinerea conidia in the cropping environment of a vented glasshouse. Knowledge of inoculum availability at time periods when the environmental risk of pathogen infection is high should improve the targeted use and effectiveness of control inputs.

Improving the Accuracy of 3-D Reconstruction in Robotic Vision Applications

Thesis (Ph.D.)--University of Washington, 2016-08

“Enjoy your baby” Internet-based CBT for mothers with babies: a feasibility randomised control trial

Background: Postnatal depression is a global health problem with lasting effects on the family. Government policy is focussed on early intervention and increasing access to psychological therapies. There is a growing evidence base for the use of computerised CBT packages and this study investigated the feasibility of a CBT-based self-help internet intervention for new mothers. Objective: To assess the ability to recruit mothers, deliver an internet course, obtain follow-up data and evaluate what mothers think of the course. Design: A feasibility randomised control design was used to compare a waiting list control group (delayed access= DA) to the Enjoy Your Baby course (immediate access= IA). Measures were administered at baseline and 8 week follow-up. Methods: Adverts were placed in the Metro freesheet, on charity web pages, on social media, posters were put up in the community, and leaflets were handed out at mother and baby groups. Participants had to be 18 years old or over with a child less than 18 months old. The IA arm was given access to the course straight away. After 8 weeks all participants were asked to recomplete the original measures and those in the IA arm also gave feedback on the course. Participants in the DA arm were given access after recompleting the questionnaires. Due to a lack of follow-up data a small discussion group was conducted. Intervention: The course contains 4 core modules including helping mothers understand why they feel the way they do and helping them build closeness to their babies. Additional modules, worksheets and homework tasks were available. The DA group were given a list of additional support resources and services, and encouraged to seek additional help if required. All participants received weekly automated emails for 12 weeks as they worked through the course. It was not possible to deliver individualised support. 34 Results: Despite using a number of recruitment strategies, recruitment was lower and slower than anticipated, and attrition was high. 41 women, primarily recruited via the internet, were randomised (IA n=21, DA n=20). No significant differences were observed between participants in either arm at baseline and no statistically significant differences were identified when the demographics and baseline measures of participants who logged-on to the course were compared to those who did not, or when participants who completed follow-up measures were compared to those who did not. Pre and post intervention scores on the EPDS approached statistical significance (P=.059, r=.444) favouring the intervention arm. The discussion group suggested strengths of the course and recommended areas for improvement, including making the course more mobile friendly. Conclusion: Internet interventions show promise; however it is difficult to recruit mothers, engagement is low and attrition high. A number of recommendations are made and a further pilot or an internal pilot of a larger substantive study should be conducted to confirm recruitment and retention. Trial ID: ISRCTN90927910.

Administrative justice and the control of bureaucratic decision-making: A study investigating how decision-makers in local authority education departments respond to the work of redress mechanisms

This socio-legal thesis has explored the factors responsible for explaining whether and how redress mechanisms control bureaucratic decision-making. The research considered the three principal institutions of administrative justice: courts, tribunals, and ombudsman schemes. The field setting was the local authority education area and the thesis examined bureaucratic decision-making about admissions to school, home-to-school transport, and Special Educational Needs (SEN). The thesis adopted a qualitative approach, using interviews and documentary research, within a multiple embedded case study design. The intellectual foundations of the research were inter-disciplinary, cutting across law, socio-legal studies, public administration, organization studies, and social policy. The thesis drew on these scholarly fields to explore the nature of bureaucratic decision-making, the extent to which it can be controlled and the way that learning occurs in bureaucracies and, finally, the extent to which redress mechanisms might exercise control. The concept of control was studied across all its dimensions – in relation both to ex post control in specific cases and the more challenging notion of ex ante or structuring control. The aim of the thesis was not to measure the prevalence of bureaucratic control by redress mechanisms, but to understand the factors that might explain its presence or absence in a particular area. The findings of the research have allowed for a number of analytical refinements and extensions to be made to existing theoretical and empirical understandings. 14 factors, along with 87 supporting propositions, have been set out with the aim of making empirically derived suggestions which can be followed up in future research. In terms of the thesis’ contribution to existing knowledge, its comparative focus and its emphasis on the broad notion of control offered the potential for new insights to be developed. Overall, the thesis claims to have made three contributions to the conceptual framework for understanding the exercise of control by redress mechanisms: it emphasizes the importance of ‘feedback’ in relation to the nature of the cases referred to redress mechanisms; it calls attention to the structure of bureaucratic decision-making as well as its normative character; and it discusses how the operational modes of redress mechanisms relate to their control functions.

Supervisory control of (max,+) automata: extensions towards applications

International audience

ARL1 of the Attribute c Control Chart with Estimated Parameter

International audience

Evaluación al sistema de control interno del departamento de producción del Centro Gráfico Salesiano de la Editorial Don Bosco

El trabajo que hemos desarrollado es una Evaluación al Sistema de Control Interno del Centro Grafico Salesiano de la Editorial Don Bosco. Esta investigación se desarrolló por la importancia que el Departamento de Producción tiene dentro de la Editorial; esto nos permitirá exponer las falencias, y dar sugerencias para mejorar su funcionamiento. Este estudio se enfoca en los procesos, procedimientos y tareas a cumplir por parte del personal, con productos de calidad, tiempos apropiados, sin desperdicio de materias primas, reducción de tiempos muertos y de costos de producción. En el CAPITULO I, se desarrollaron los conceptos del COSO 1, que serán útiles para nuestro estudio que describe las generalidades de cada uno de sus componentes y métodos de evaluación. En el CAPITULO II, realizamos una breve descripción de los aspectos generales de la empresa, para tener un mayor conocimiento del entorno. En el CAPITULO III realizamos la evaluación, del SCI al departamento productivo, utilizado técnicas de evaluación como las del flujograma, cuestionarios, y con la información obtenida realizamos un diagnóstico y emitimos un informe con conclusiones y recomendaciones. En el CAPITULO IV se finaliza con un planteamiento de conclusiones y recomendaciones que ayuden a mejorar el control de las actividades dentro del departamento de producción. Este estudio no solo servirá como fuente de observación por parte de la Editorial Don Bosco, sino también a empresas del mismo giro comercial, siendo capaz de dar lineamientos de observación de producción.

Real-time load-side control of electric power systems

Two trends are emerging from modern electric power systems: the growth of renewable (e.g., solar and wind) generation, and the integration of information technologies and advanced power electronics. The former introduces large, rapid, and random fluctuations in power supply, demand, frequency, and voltage, which become a major challenge for real-time operation of power systems. The latter creates a tremendous number of controllable intelligent endpoints such as smart buildings and appliances, electric vehicles, energy storage devices, and power electronic devices that can sense, compute, communicate, and actuate. Most of these endpoints are distributed on the load side of power systems, in contrast to traditional control resources such as centralized bulk generators. This thesis focuses on controlling power systems in real time, using these load side resources. Specifically, it studies two problems.

(1) Distributed load-side frequency control: We establish a mathematical framework to design distributed frequency control algorithms for flexible electric loads. In this framework, we formulate a category of optimization problems, called optimal load control (OLC), to incorporate the goals of frequency control, such as balancing power supply and demand, restoring frequency to its nominal value, restoring inter-area power flows, etc., in a way that minimizes total disutility for the loads to participate in frequency control by deviating from their nominal power usage. By exploiting distributed algorithms to solve OLC and analyzing convergence of these algorithms, we design distributed load-side controllers and prove stability of closed-loop power systems governed by these controllers. This general framework is adapted and applied to different types of power systems described by different models, or to achieve different levels of control goals under different operation scenarios. We first consider a dynamically coherent power system which can be equivalently modeled with a single synchronous machine. We then extend our framework to a multi-machine power network, where we consider primary and secondary frequency controls, linear and nonlinear power flow models, and the interactions between generator dynamics and load control.

(2) Two-timescale voltage control: The voltage of a power distribution system must be maintained closely around its nominal value in real time, even in the presence of highly volatile power supply or demand. For this purpose, we jointly control two types of reactive power sources: a capacitor operating at a slow timescale, and a power electronic device, such as a smart inverter or a D-STATCOM, operating at a fast timescale. Their control actions are solved from optimal power flow problems at two timescales. Specifically, the slow-timescale problem is a chance-constrained optimization, which minimizes power loss and regulates the voltage at the current time instant while limiting the probability of future voltage violations due to stochastic changes in power supply or demand. This control framework forms the basis of an optimal sizing problem, which determines the installation capacities of the control devices by minimizing the sum of power loss and capital cost. We develop computationally efficient heuristics to solve the optimal sizing problem and implement real-time control. Numerical experiments show that the proposed sizing and control schemes significantly improve the reliability of voltage control with a moderate increase in cost.

Current knowledge on the role of the inferior frontal gyrus in Theory of Mind - a commentary on Schurz and Tholen (2016)

Schurz and Tholen (2016) argue that common approaches to studying the neural basis of “theory of mind” (ToM) obscure a potentially important role for inferior frontal gyrus (IFG) in managing conflict between perspectives, and urge new work to address this question: “to gain a full understanding of the IFG's role in ToM, we encourage future imaging studies to use a wider range of control conditions.” (p332). We wholeheartedly agree, but note that this observation has been made before, and has already led to a programme of work that provides evidence from fMRI, EEG, and TMS on the role of IFG in managing conflict between self and other perspectives in ToM. We highlight these works, and in particular we demonstrate how careful manipulation within ToM tasks has been used to act as an internal control condition, wherein conflict has been manipulated within-subject. We further add to the discussion by framing key questions that remain regarding IFG in the context of these. Using limitations in the existing research, we outline how best researchers can proceed with the challenge set by Schurz and Tholen (2016).