901 resultados para GDP elasticity
Resumo:
In this work, we use the rule of mixtures to develop an equivalent material model in which the total strain energy density is split into the isotropic part related to the matrix component and the anisotropic energy contribution related to the fiber effects. For the isotropic energy part, we select the amended non-Gaussian strain energy density model, while the energy fiber effects are added by considering the equivalent anisotropic volumetric fraction contribution, as well as the isotropized representation form of the eight-chain energy model that accounts for the material anisotropic effects. Furthermore, our proposed material model uses a phenomenological non-monotonous softening function that predicts stress softening effects and has an energy term, derived from the pseudo-elasticity theory, that accounts for residual strain deformations. The model’s theoretical predictions are compared with experimental data collected from human vaginal tissues, mice skin, poly(glycolide-co-caprolactone) (PGC25 3-0) and polypropylene suture materials and tracheal and brain human tissues. In all cases examined here, our equivalent material model closely follows stress-softening and residual strain effects exhibited by experimental data
Resumo:
We estimate the determinants of capital intensity in Japan and the US, characterized by striking different paths. We augment an otherwise standard Constant Elasticity of Substitution (CES) model with demand-side considerations, which we find especially relevant in the US. In this augmented setting, the elasticity of substitution between capital and labor is placed around 0.85 in Japan, and 0.30 in the US. We also find evidence of biased technical change, which is capital-saving in Japan but labor-saving in the US. These differences help us explain the diverse experience in the capital deepening process of these economies, and lead us to conclude that demand-side drivers may also be relevant to account for different growth experiences. A close look at the nature of technological change is also needed before designing one-size-fits-all industrial, economic growth, and/or labor market policies.
Resumo:
Edible films are thin materials based on biopolymers and food additives. The aim of this work is a review on the application of dynamic mechanical analysis in edible film technology. After a brief review of the linear visco-elasticity theory, a description of some practical aspects related to dynamic mechanical analysis, such as sample fixation and sample dehydration during analysis and types and modes of tests are presented. Thus, the use of temperature scanning analysis for glass transition and for plasticizer-biopolymer compatibility studies and frequency scanning tests, less common in edible film technology, are critically reviewed.
Resumo:
Los cambios conceptuales y metodológicos en los sistemas empleados para la construcción de la Contabilidad Nacional de todos los países, especialmente a causa de la implantación en la UE del SEC 95, así como la revisión y corrección de los datos de población más actuales obligan a introducir modificaciones muy sustanciales en las series históricas de Cuentas Nacionales por medio de la técnica de la retropolación. La realización de los nuevos cálculos, que pueden ser calificados de auténticas estimaciones de segunda generación, ofrece para España, Francia, Italia y Portugal resultados muy interesantes. Las tasas de crecimiento acumulativo anual para el conjunto del período son muy semejantes entre sí, aunque identifican a la economía española como la que más creció, tanto en la producción de bienes y servicios como en la dimensión demográfica y también en PIB por habitante.
Resumo:
Deflection compensation of flexible boom structures in robot positioning is usually done using tables containing the magnitude of the deflection with inverse kinematics solutions of a rigid structure. The number of table values increases greatly if the working area of the boom is large and the required positioning accuracy is high. The inverse kinematics problems are very nonlinear, and if the structure is redundant, in some cases it cannot be solved in a closed form. If the structural flexibility of the manipulator arms is taken into account, the problem is almost impossible to solve using analytical methods. Neural networks offer a possibility to approximate any linear or nonlinear function. This study presents four different methods of using neural networks in the static deflection compensation and inverse kinematics solution of a flexible hydraulically driven manipulator. The training information required for training neural networks is obtained by employing a simulation model that includes elasticity characteristics. The functionality of the presented methods is tested based on the simulated and measured results of positioning accuracy. The simulated positioning accuracy is tested in 25 separate coordinate points. For each point, the positioning is tested with five different mass loads. The mean positioning error of a manipulator decreased from 31.9 mm to 4.1 mm in the test points. This accuracy enables the use of flexible manipulators in the positioning of larger objects. The measured positioning accuracy is tested in 9 separate points using three different mass loads. The mean positioning error decreased from 10.6 mm to 4.7 mm and the maximum error from 27.5 mm to 11.0 mm.
Resumo:
Russia has been one of the fastest developing economic areas in the world. Based on the GDP, the Russian economy grew evenly since the crisis in 1998 up till 2008. The growth in the gross domestic product has annually been some 5–10%. In 2007, the growth reached 8.1%, which is the highest figure after the 10% growth in 2000. Due to the growth of the economy and wage levels, purchasing power and consumption have been strongly increasing. The growing consumption has especially increased the imports of durables, such as passenger cars, domestic appliances and electronics. The Russian ports and infrastructure have not been able to satisfy the growing needs of exports and imports, which is why quite a large share of Russian foreign trade is going through third countries as transit transports. Finnish ports play a major role in transit transports to and from Russia. About 15% of the total value of Russian imports was transported through Finland in 2008. The economic recession that started in autumn 2008 and continues to date has had an impact on the economic development of Russia. The export income has decreased, mainly due to the reduced world market prices of energy products (oil and gas) and raw minerals. Investments have been postponed, getting credit is more difficult than before, and the ruble has weakened in relation to the euro and the dollar. The imports are decreasing remarkably, and are not forecast to reach the 2008 volumes even in 2012. The economic crisis is reflected in Finland's transit traffic. The volume of goods transported through Finland to and from Russia has decreased almost in the same proportion as the imports of goods to Russia. The biggest risk threatening the development of the Russian economy over long term is its dependence on export income from oil, gas, metals, minerals and forest products, as well as the trends of the world market prices of these products. Nevertheless, it is expected that the GDP of Russia will start to grow again in the forthcoming years due to the increased demand for energy products and raw minerals in the world. At the same time, it is obvious that the world market prices of these products will go up with the increasing demand. The increased income from exports will lead to a growth of imports, especially those of consumer goods, as the living standard of Russian citizens rises. The forecasts produced by the Russian Government concerning the economic development of Russia up till 2030 also indicate a shift in exported goods from raw materials to processed products, which together with energy products will become the main export goods of Russia. As a consequence, Russia may need export routes through third countries, which can be seen as an opportunity for increased transit transports through the ports of Finland. The ports competing with the ports of Finland for Russian foreign trade traffic are the Russian Baltic Sea ports and the ports of the Baltic countries. The strongest competitors are the Baltic Sea ports handling containers. On the Russian Baltic Sea, these ports include Saint Petersburg, Kaliningrad and, in the near future, the ports of Ust-Luga and possibly Vyborg. There are plans to develop Ust-Luga and Vyborg as modern container ports, which would become serious competitors to the Finnish ports. Russia is aiming to redirect as large a share as possible of foreign trade traffic to its own ports. The ports of Russia and the infrastructure associated with them are under constant development. On the other hand, the logistic capacity of Russia is not able to satisfy the continually growing needs of the Russian foreign trade. The capacity problem is emphasized by a structural incompatibility between the exports and imports in the Russian foreign trade. Russian exports can only use a small part of the containers brought in with imports. Problems are also caused by the difficult ice conditions and narrow waterways leading to the ports. It is predicted that Finland will maintain its position as a transit route for the Russian foreign trade, at least in the near future. The Russian foreign trade is increasing, and Russia will not be able to develop its ports in proportion with the increasing foreign trade. With the development of port capacity, cargo flows through the ports of Russia will grow. Structural changes in transit traffic are already visible. Firms are more and more relocating their production to Russia, for example as regards the assembly of cars and warehousing services. Simultaneously, an increasing part of transit cargoes are sent directly to Russia without unloading and reloading in Finland. New product groups have nevertheless been transported through Finland (textile products and tools), replacing the lost cargos. The global recession that started in autumn 2008 has influenced the volume of Russian imports and, consequently, the transit volumes of Finland, but the recession is not expected to be of long duration, and will thus only have a short-term impact on transit volumes. The Finnish infrastructure and services offered by the logistic chain should also be ready to react to the changes in imported product groups as well as to the change in Russian export products in the future. If the development plans of the Russian economy are realized, export products will be more refined, and the share of energy and raw material products will decrease. The other notable factor to be taken into consideration is the extremely fast-changing business environment in Russia. Operators in the logistic chain should be flexible enough to adapt to all kinds of changes to capitalise on business opportunities offered by the Russian foreign trade for the companies and for the transit volumes of Finnish ports, also in the future.
Resumo:
The purpose of this study is to examine macroeconomic indicators‟ and technical analysis‟ ability to signal market crashes. Indicators examined were Yield Spread, The Purchasing Managers Index and the Consumer Confidence Index. Technical Analysis indicators were moving average, Moving Average Convergence-Divergence and Relative Strength Index. We studied if commonly used macroeconomic indicators can be used as a warning system for a stock market crashes as well. The hypothesis is that the signals of recession can be used as signals of stock market crash and that way a basis for a hedging strategy. The data is collected from the U.S. markets from the years 1983-2010. Empirical studies show that macroeconomic indicators have been able to explain the future GDP development in the U.S. in research period and they were statistically significant. A hedging strategy that combined the signals of yield spread and Consumer Confidence Index gave most useful results as a basis of a hedging strategy in selected time period. It was able to outperform buy-and-hold strategy as well as all of the technical indicator based hedging strategies.
Resumo:
The objective of this study was to obtain estimates of longitudinal growth stresses in standing trees of the Eucalyptus dunnii Maiden at eight, thirteen, fifteen and nineteen years of age and to determine their relationships with wood characteristics. The longitudinal growth stresses were indirectly measured by the "CIRAD-Forêt" method and estimated from both the dynamic modulus of elasticity and the modulus of elasticity in tension parallel to the grain. The longitudinal residual strain (LRS) and the estimates of the longitudinal growth stresses tended to increase with the age of the material. The LRS correlated positively and significantly with all the growth stresses estimates. The largestes magnitudes were at 13, 15 and 19 years of age. The basic density presented high, positive and significant correlations with the dynamic modulus of elasticity, estimated in the longitudinal direction, for wood saturated and at 12% moisture content, for all the ages assessed. All the growth stresses estimates presented high, positive and significant correlations between themselves.
Resumo:
ABSTRACT One of the fastest growing sectors in the domestic industry is the forestry, which has contributed significantly to economic development, job creation, income taxes, putting Brazil in a prominent position in the world market. This paper analyzes the evolution of the technological intensity of 12 main products exported by the sector, from 2000 to 2011. For that, utilizes an indicator called PRODY, which allows classifying different products according to their technological intensity or income content and considers the GDP per capita of exporting countries of each product, weighted by its revealed comparative advantage. It can be seen by the results, a continuous growth in all products' technology indicators and their decomposition into income effects, comparative advantage and joint effects, allowed to verify the main causes of this growth. Products with lower PRODY values are those that presented a higher evolution during the period studied. Products of higher processing, and those from pulp and paper industry, had greater technological advances, thanks to a joint effect, while the ones of lower processing, had a technological improvement due to the increase in GDP per capita in exporting countries. Sawn wood was the standout product, being the only one who proved to be dependent of comparative advantage effect, confirming that this industry has been reinventing itself and incorporating, in fact, more technology. This study revealed the importance of technological intensification to generate comparative advantage and be able to stand against international competition.
Resumo:
Background: Metabolic syndrome (MetS) is a cluster of cardiovascular risk factors including central obesity, insulin resistance, impaired glucose tolerance, hypertension and dyslipidemia. The prevalence of MetS is increasing worldwide in all age groups. MetS is associated with increased risk of cardiovascular disease and type 2 diabetes mellitus. Aims: The aim of the present study was to investigate the prevalence, secular trends and childhood predictors of MetS in young adults. Furthermore, the relations between MetS and subclinical atherosclerosis were studied and whether apolipoproteins (apo) B and A-I, C-reactive protein (CRP) and type II secretory phospholipase A2 (sPLA2) were associated with MetS, and to what extent the atherogenicity of MetS was explained by these factors. Participants and Methods: The present thesis is part of the large scale population-based, prospective study, the Cardiovascular Risk in Young Finns Study. The first cross-sectional study was conducted in 1980 and included 3,596 participants aged 3-18 years. Carotid and brachial ultrasound studies were performed for 2,283 of these participants in 2001 and 2,200 of these participants in 2007. Results: The overall prevalence of MetS in young adults aged 24-39 years in 2001 was 10-15 % and 6 years later in 30-45 year-old adults it was 15-23 % depending on the MetS definition used. Between the years 1986 and 2001, MetS prevalence increased from 1.0 % to 7.5 % (p<0.0001) in 24-year-old participants that was mostly driven by the increased central obesity. Participants with MetS had increased carotid intima-media thickness (cIMT) and decreased carotid elasticity compared to those without the syndrome. Impaired brachial flow-mediated dilatation (FMD) was not related to MetS but it modified the relationship between MetS and cIMT (P for interaction 0.023). High levels of apoB, CRP, sPLA2 and low levels of apoA-I associated with MetS in young adults. In prospective analysis both MetS and high apoB predicted (P<0.0001) incident high cIMT, defined as cIMT>90th percentile and/or plaque. The association between MetS and incident high cIMT was attenuated by ~40 % after adjustment with apoB. Conclusions: MetS is common in young adults and increases with age. Screening for risk factors, especially obesity, at an early life stage could help identify children and adolescents at increased risk of developing MetS and cardiovascular disease later in life. MetS identifies a population of young adults with evidence of increased subclinical atherosclerosis. Impaired brachial endothelial response is not a hallmark of MetS in young adults, but the status of endothelial function modifies the association between metabolic risk factors and atherosclerosis. In addition, the atherogenicity of MetS in this population assessed by incident high cIMT appears to be substantially mediated by elevated apoB.
Resumo:
This thesis focuses on tissue inhibitor of metalloproteinases 4 (TIMP4) which is the newest member of a small gene and protein family of four closely related endogenous inhibitors of extracellular matrix (ECM) degrading enzymes. Existing data on TIMP4 suggested that it exhibits a more restricted expression pattern than the other TIMPs with high expression levels in heart, brain, ovary and skeletal muscle. These observations and the fact that the ECM is of special importance to provide the cardiovascular system with structural strength combined with elasticity and distensibility, prompted the present molecular biologic investigation on TIMP4. In the first part of the study the murine Timp4 gene was cloned and characterized in detail. The structure of murine Timp4 genomic locus resembles that in other species and of the other Timps. The highest Timp4 expression was detected in heart, ovary and brain. As the expression pattern of Timp4 gives only limited information about its role in physiology and pathology, Timp4 knockout mice were generated next. The analysis of Timp4 knockout mice revealed that Timp4 deficiency has no obvious effect on the development, growth or fertility of mice. Therefore, Timp4 deficient mice were challenged using available cardiovascular models, i.e. experimental cardiac pressure overload and myocardial infarction. In the former model, Timp4 deficiency was found to be compensated by Timp2 overexpression, whereas in the myocardial infarct model, Timp4 deficiency resulted in increased mortality due to increased susceptibility for cardiac rupture. In the wound healing model, Timp4 deficiency was shown to result in transient retardation of re-epithelialization of cutaneous wounds. Melanoma tumor growth was similar in Timp4 deficient and control mice. Despite of this, lung metastasis of melanoma cells was significantly increased in Timp4 null mice. In an attempt to translate the current findings to patient material, TIMP4 expression was studied in human specimens representing different inflammatory cardiovascular pathologies, i.e. giant cell arteritis, atherosclerotic coronary arteries and heart allografts exhibiting signs of chronic rejection. The results showed that cardiovascular expression of TIMP4 is elevated particularly in areas exhibiting inflammation. The results of the present studies suggest that TIMP4 has a special role in the regulation of tissue repair processes in the heart, and also in healing wounds and metastases. Furthermore, evidence is provided suggesting the usefulness of TIMP4 as a novel systemic marker for vascular inflammation.
Resumo:
OBJETIVOS: A gastroduodenopancreatectomia (GDP) é atualmente a única forma de tratamento segura e eficaz para pacientes selecionados com doenças benignas e malignas do pâncreas e da região periampular. Entre as complicações pós-operatórias, a fístula pancreática continua sendo a mais importante, com uma incidência que varia de 5 a 25% nas grandes séries. Os objetivos deste trabalho são os de avaliar a morbimortalidade relacionada a duas técnicas de anastomoses pancreatojejunais (ducto-mucosa X telescopagem), e comparar seus resultados. MÉTODO: Foram analisados retrospectivamente 64 pacientes submetidos à GDP, no Serviço de Cirurgia Abdômino-Pélvica, do INCA, no período de 1987 a 2002. Destes doentes, 42 foram submetidos à anastomose tipo ducto-mucosa e 22 à telescopagem. A análise estatística foi realizada através do teste de Fischer. RESULTADOS: A taxa de fístula pancreática no grupo ducto-mucosa foi de 12% e no telescopagem foi 36%. Esta diferença percentual se mostrou estatisticamente significativa (p = 0,02). A mortalidade operatória relacionada à fístula pancreática foi de 2,4% para o grupo ducto-mucosa e 4,5% para o telescopagem, com nível de significância estatística > 5%. CONCLUSÕES: A técnica de anastomose pancreatojejunal tipo ducto-mucosa é associada a menores índices de fístula pancreática em relação a técnica de telescopagem, enquanto que a mortalidade operatória relacionada a fístula não mostrou diferença estatística entre os dois grupos estudados.
Resumo:
OBJETIVO: Avaliar a morbi-mortalidade cirúrgica e a evolução dos pacientes submetidos a gastroduodenopancreatectomia (GDP) ampliada para tumores não periampulares. MÉTODO: Foram analisados retrospectivamente 15 pacientes submetidos a GDP para tumores não periampulares, no Serviço de Cirurgia Abdômino-Pélvica do INCa-RJ, no período de 1990 a 2005. RESULTADOS: Os tipos histológicos dos tumores primários incluíam o adenocarcinoma de cólon (n=9), adenocarcinoma gástrico (n=3), tumor estromal gastro-intestinal (GIST) de delgado (n=2) e carcinoma de células renais (n=1). A mediana de tempo de internação foi de 13,5 dias (6 a 36), a mediana de tempo de cirurgia foi de 360 minutos, a média de hemotransfusão foi de 307ml, a mediana de linfonodos ressecados foi de 19, sendo três pacientes com linfonodos positivos, a mediana do tamanho do tumor foi de 7,8cm (2,5 a 24), a morbidade cirúrgica foi de 53%, a mortalidade operatória foi de 6,6% (1/15) e a mediana de sobrevida global foi de 38 meses. CONCLUSÃO: A gastroduodenopancreatectomia ampliada para tumores não periampulares é um procedimento de excessão e deve ser considerada somente para paciente selecionados.
Resumo:
OBJETIVO: O objetivo deste trabalho foi relatar a morbimortalidade associada à técnica de reconstrução pancreática utilizando anastomose pancreato-jejunal tipo ducto-mucosa, sem cateter transanastomótico, em pâncreas de consistência mole e ducto de Wirsung menor que três mm. MÉTODOS: Analisamos consecutivamente os resultados de 16 pacientes submetidos à GDP com técnica de anastomose pancreato-jejunal tipo ducto-mucosa no Serviço de Cirurgia Abdômino-pélvica do INCA. Todos pacientes eram portadores de pâncreas de consistência mole e ducto pancreático fino (< 3mm). RESULTADOS: Dos 16 pacientes analisados, oito eram do sexo masculino e com mediana de idade de 55 anos. No período pós-operatório um paciente apresentou fístula pancreática e houve um caso que evoluiu para óbito. CONCLUSÃO: Acreditamos que é possível a realização de anastomose pancreática tipo ducto-mucosa, sem cateter transanastomótico, em pacientes com ducto pancreático menor que três mm sem aumento da morbimortalidade.
Resumo:
OBJETIVO: avaliar a morbidade e a mortalidade cirúrgica em pacientes submetidos a gastroduodenopancreatectomia (GDP) com linfadenectomia padrão e radical para adenocarcinoma de papila, analisando os fatores prognósticos com relação à sobrevida global e livre de doença. MÉTODOS: foram analisados retrospectivamente no período de 1999 a 2007, no Serviço de Cirurgia Abdômino-Pélvica do INCa-RJ, 50 casos de GDP para adenocarcinoma da papila duodenal divididos em dois grupos de acordo com a linfadenectomia (grupo A: linfadenectomia padrão e grupo B: linfadenectomia radical). RESULTADOS: A mediana de idade foi semelhante nos dois grupos, assim como a distribuição entre os sexos. Na comparação entre as linfadenectomias somente o número de linfonodos ressecados (grupo A: 12,3 e grupo B: 26,5) e o tempo operatório (grupo A: 421 e grupo B: 474) foram significativamente diferentes. Não ocorreram diferenças estatisticamente significativas nos dois grupos com relação a morbi-mortalidade operatória e tempo de internação. A sobrevida livre de doença (grupo A: 35 meses e grupo B: 51 meses) e sobrevida global (grupo A: 38 meses e grupo B: 53 meses) foi maior no grupo da linfadenectomia radical, porém não foram significantes estatisticamente. CONCLUSÃO: no presente estudo não ocorreram casos de linfonodos metastáticos para outros grupos nodais sem o acometimento linfonodal das cadeias pancreato-duodenais (13 e 17), sugerindo um padrão de disseminação linfonodal. Apesar da linfadenectomia radical apresentar taxas de sobrevida livre de doença e sobrevida global maiores esses dados não foram significativos estatisticamente. Novos estudos devem ser realizados para avaliar o real papel da linfadenectomia radical no adenocarcinoma da papila duodenal.