887 resultados para Fixed bed reactors
Resumo:
Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C
Resumo:
In the last decade, biological purification of gaseous waste has become an important alternative to many conventional methods of exhaust air treatment. More recently, biofiltration has proved to be an effective and inexpensive method for the treatment of air contaminated with volatile organic compounds (VOCs). A biofilter consists in a reactor packed with a porous solid bed material, where the microorganisms are fixed. During the biofiltration process, polluted air is transported through the biofilter medium where the contaminant is degraded. Within the biofilm, the pollutants in the waste gases are energy and carbon sources for microbial metabolism and are transformed into CO2, water and biomass. The bed material should be characterized by satisfactory mechanical and physical properties as structure, void fraction, specific area and flow resistance. The aim of this research was the biofilter construction and study of the biological degradation of ethanol and toluene, as well as the modeling of the process. Luffa cylindrica is a brazilian fiber that was used as the filtering material of the present work. The parameters and conditions studied were: composition of nutrients solution; effect of microflorae strains, namely Pseudomanas putida and Rhodococcus rhodochrous; waste gas composition; air flow rate; and inlet load of VOCs. The biofilter operated in diffusion regime and the best results for remotion capacity were obtained when a microorganisms consortion of Pseudomanas putida and Rhodococcus rhodochrous,were used, with a gas flow rate of 1 m3.h-1 and molar ratio nitrogene/phosphore N/P=2 in the nutrients solution. The maximum remotion capacity for ethanol was around 90 g.m-3.h-1 and 50 g.m-3.h-1 to toluene. It was proved that toluene has inhibitory effect on the ethanol remotion When the two VOCs were present in the same waste gas, there was a decrease of 40% in ethanol remotion capacity. Luffa cylindrica does not present considerable pressure drop. Ottengraf and van Lith models were used to represent the results obtained for ethanol and toluene, respectively. The application of the transient model indicated a satisfactory approximation between the experimental results obtained for ethanol and toluene vapors biofiltration and the ones predicted it
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A eficiência do reator de leito fluidizado com circulação em tubos concêntricos depende das condições hidrodinâmicas que influem na transferência de oxigênio ao biofilme. Este trabalho investigou a influência da relação entre diâmetros dos tubos e da concentração de meio suporte (areia), sobre o coeficiente global de transferência de oxigênio (K La). Os ensaios - em reatores de 2,6 m de altura, com diâmetro externo de 250 mm e internos de 100, 125, 150 e 200 mm - empregaram vazões de ar até 2.500 L.h-1 e concentrações de até 150 g.L-1 de areia. O K La aumentou ligeiramente com 30 g.L-1 e diminuiu para concentrações maiores, confirmando relatos da literatura em condições semelhantes. Um modelo para K La em meio bifásico foi ajustado para as diversas relações ensaiadas entre a área externa e a interna, postulando-se uma redução na razão entre a transferência na fase líquida e o diâmetro da bolha com o aumento da vazão de ar.
Resumo:
The hydrodynamic characterization and the performance evaluation of an aerobic three phase fluidized bed reactor in wastewater fish culture treatment are presented in this report. The objective of this study was to evaluate the organic matter, nitrogen and phosphorous removal efficiency in a physical and biological wastewater treatment system of an intensive Nile Tilapia laboratory production with recirculation. The treatment system comprised of a conventional sedimentation basin operated at a hydraulic detention time HDT of 2.94 h and an aerobic three phase airlift fluidized bed reactor AAFBR operated at an 11.9 min HDT. Granular activated carbon was used as support media with density of 1.64 g/cm(3) and effective size of 0.34 mm in an 80 g/L constant concentration. Mean removal efficiencies of BOD, COD, phosphorous, total ammonia nitrogen and total nitrogen were 47%, 77%, 38%, 27% and 24%, respectively. The evaluated system proved an effective alternative for water reuse in the recirculation system capable of maintaining water quality characteristics within the recommended values for fish farming and met the Brazilian standards for final effluent discharges with exception of phosphorous values. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C
Resumo:
Two experiments were designed to evaluate strategies to increase fertility of Bos indicus postpubertal heifers and nonlactating cows submitted to a fixed-time artificial insemination (TAI) protocol consisting of an intravaginal device containing 1.9 g of progesterone (CIDR) insertion + estradiol benzoate on Day 0, CIDR withdrawal + estradiol cypionate on Day 9, and TAI on Day 11. In Experiment 1, heifers (n = 1153) received a new or an 18-d previously used CIDR and, on Day 9, prostaglandin F(2 alpha) (PGF(2 alpha)) + 0, 200, or 300 IU equine chorionic gonadotropin (eCG). Heifers treated with a new CIDR had greater (least squares means +/- SEM) serum concentration of progesterone on Day 9 (3.06 +/- 0.09 ng/mL vs. 2.53 +/- 0.09 ng/mL; P < 0.05) and a smaller follicle at TAI (11.61 +/- 0.11 nim vs. 12.05 +/- 0.12 mm; P < 0.05). Heifers with smaller follicles at TAI had lesser serum progesterone, concentrations on Day 18 and reduced rates of ovulation, conception, and pregnancy (P < 0.05). Treatment with eCG improved (P < 0.05) follicle diameter at TAI (11.50 +/- 0.10 mm, 11.90 +/- 0.11 mm, and 12.00 +/- 0.10 mm, for 0, 100, and 200 IU, respectively), serum progesterone concentration on Day 18 (2.77 +/- 0.11 ng/mL, 3.81 +/- 0.11 ng/mL, and 4.87 +/- 0.11 ng/mL), and rates of ovulation (83.8%, 88.5%, and 94.3%) and pregnancy (41.3%, 47.0%, and 46.7%). In Experiment 2, nonlactating Nelore cows (n = 702) received PGF(2 alpha) treatment on Days 7 or 9 and, on Day 9, 0 or 300 IU cCG. Cows receiving PGF(2 alpha) on Day 7 had lesser serum progesterone concentrations on Day 9 (3.05 +/- 0.21 ng/mL vs. 4.58 +/- 0.21 ng/mL; P < 0.05), a larger follicle at TAI (11.54 +/- 0.21 mm vs. 10.84 +/- 0.21 mm; P < 0.05), and improved (P < 0.05) rates of ovulation (85.4% vs. 77.0%), conception (60.9% vs. 47.2%), and pregnancy (52.0% vs. 36.4%). Treatment with eCG improved (P < 0.05) serum progesterone concentration on Day 18 (3.24 +/- 0.14 ng/mL vs. 4.55 +/- 0.14 ng/mL) and the rates of ovulation (72.4% vs. 90.0%) and pregnancy (37.5% vs. 50.8%). In conclusion, giving PGF(2 alpha) earlier in the protocol in nonlactating cows and eCG treatment in postpubertal heifers and nonlactating cows improved fertility in response to a TAI (progesterone + estradiol) protocol. (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
In Experiments 1, 2, and 3, we evaluated the effects of temporary weaning (TW), equine chorionic gonadotropin (eCG), and follicle-stimulating hormone (FSH) treatments on results of it fixed-time artificial insemination (TAI) protocol in postpartum Bos indicus cows. In Experiment 1, treatment with 400 IU eCG or with TW for 48 h consistently improved pregnancy rates (PRs) at TAI, but, in Experiment 2, FSH treatment was less effective than eCG or TW. In Experiment 3, the inclusion of eCG treatment in cows subjected to TW did not improve PRs. We concluded that TW or 400 IU eCG should be included in the TAI protocol in postpartum Bos indicus cows to enhance fertility. In Experiment 4, we used records front heifers and cows treated with the proposed protocol during the 2006-2007 (n = 27,195) and 2007-2008 (n = 36,838) breeding seasons from multiple locations in Brazil to evaluate factors potentially affecting PRs. Overall PR at TAI was 49.6% (31,786 of 64,033). Pregnancy rate differed (P < 0.01) among farm within location (results ranging between 26.8% and 68.0%; P < 0.01), cow group within farm, by breed (Bos indicus, 48.3% [26,123 of 54,145]; Bos taurus, 61.7% [3652 of 5922]; and crossbred Bos indicus x Bos taurus, 50.7% [2011 of 3966]), category (nulliparous, 39.6% [2095 of 52901] suckled primiparous, 45.2% [3924 of 8677]; suckled multiparous, 51.8% [24,245 of 46,767]; and nonsuckled multiparous, 46.1% [1522 of 3299]), body condition score at TAI (<= 2.5 43.0% [3409 of 7923]; 3.0, 49.6% [18,958 of 38,229]; and >3.5, 52.7% [9419 of 17,881]). Days postpartum at beginning, of protocol did not affect PR (30 to 60 d, 47.6% [4228 of 8881]; 61 to 90 d, 51.7% 116,325 to 31,5721; and 91 to 150 d, 50.8% [7616 to 14,991]; P > 0.1). Pregnancy rate was also consistently affected (P < 0.01) by sire (results ranging from 7.2% to 77.3%) and artificial insemination technician (results ranging from 15.1% to 81.8%). (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
The objective was to determine whether the presence of fertility-associated antigen (FAA) on sperm collected from Nelore (Bos indicus) bulls can be used to assess potential fertility of sperm for use at first-service fixed-time AI (TAI). Six Nelore bulls were selected based on FAA status (FAA-negative: N = 3; FAA-positive: N = 3) and the ability to produce neat semen with >= 70% morphologically normal sperm and 60% estimated progressive motility before cryopmservation. In Experiment 1, suckled multiparous Nelore cows (N = 835) were evaluated for body condition score (BCS) and received an intravaginal progesterone device (CIDR) and 2.0 mg of estradiol benzoate (Day 0). on Day 9 the CIDR was removed, 12.5 mg of PGF(2 alpha) and 0.5 mg of estradiol cypionate were administered, and calves were removed for 48 h. All cows received TAI on Day II (48 h after CIDR removal). Pregnancy per TAI (P/TAI) was not different between FAA-positive and FAA-negative bulls (41.5% vs. 39.3%, respectively). There was an effect of AI technician on P/TAI (36.0% vs. 43.9%; P < 0.05) and BCS tended to affect P/TAI (P = 0.09), as cows with BCS >= 2.75 were 1.4 times more likely to become pregnant compared with cows with BCS < 2.75. In Experiment 2, nulliparous Nelore heifers (N = 617) were evaluated for BCS and received a CIDR and estradiol benzoate (2.0 mg) on Day 0. on Day 7, all heifers received PGF(2 alpha) (12.5 mg). on Day 9, CIDR inserts were removed and all heifers received estradiol cypionate (0.6 mg) and 200 IU eCG. All heifers received TAI on Day 11 (48 h after CIDR removal). Pregnancy/TAI was different (P = 0.04) between FAA-positive and FAA-negative bulls (33.7% vs. 40.7%, respectively). Presence of FAA on sperm was unsuccessful in assessing the potential fertility of sperm for use in TAI. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
Five experiments were conducted on commercial farms in Brazil aiming to develop a fixed-time artificial insemination (TAI) protocol that achieved pregnancy rates between 40% and 55% in Bos indicus cows. These studies resulted in the development of the following protocol: insertion of all intravaginal device containing 1.9 g of progesterone (CIDR) plus 2.0 mg im estradiol benzoate on Day 0; 12.5 mg im dinoprost tromethamine on Day 7 in cycling cows or oil Day 9 in anestrous cows; CIDR withdrawal plus 0.5 mg im estradiol cypionate plus temporary calf removal on Day 9; TAI (48 h after CIDR withdrawal) plus reuniting of calves with their dams on Day 11. Reduced dose of prostaglandin F(2 alpha) (PGF(2 alpha): 12.5 mg im dinoprost tromethamine) effectively caused luteolysis. In cycling cows, fertility was greater when the treatment with PGF(2 alpha) was administered on Day 7 than oil Day 9, but in anestrous cows, no effects of time of the PGF(2 alpha) treatment were found. Estradiol cypionate effectively replaced estradiol benzoate or gonadotropin-releasing hormone as the ovulatory stimulus, reducing labor and cost. In this protocol, CIDR inserts were successfully used four times (9 d each use) with no detrimental effects on fertility. (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
In Exp. 1, we evaluated the effects of 2 lengths of progesterone exposure [CIDR (controlled intravaginal drug release); 7 vs. 14 d] before a modified CO-Synch protocol [50.0-mu g injection of GnRH 6.5 d before a 25.0-mg injection of PGF(2 alpha) followed by another injection of GnRH and fixed-time AI (TAI) 2 d after PGF(2 alpha)], with or without temporary weaning (TW) before GnRH treatments, on fertility of suckled multiparous Bos indicus cows (n = 283) and on calf performance. Timed AI pregnancy rates for cows receiving 7 d CIDR + TW, 7 d CIDR, 14 d CIDR + TW, and 14 d CIDR were 53, 47, 46, and 41%, respectively (P > 0.10). Calves submitted to two 48-h TW 6 d apart had decreased mean BW at 240 d (187.9 +/- 2.7 vs. 195.5 +/- 2.7 kg; P < 0.05), but BW at 420 d was not affected by TW (240.1 +/- 5.1 kg). In Exp. 2, we evaluated the effect of no treatment and treatment with or without a CIDR insert between GnRH and PGF(2 alpha) treatments of a modified CO-Synch protocol on pregnancy rate to TAI, and throughout a 90-d breeding season in suckled multiparous Bos indicus cows (n = 453). The inclusion of a CIDR between first GnRH and PGF(2 alpha) treatments of a modified CO-Synch protocol did not improve pregnancy rate (29 and 33% for cows receiving CO-Synch + CIDR and CO-Synch protocol, respectively), and cycling cows had poorer TAI pregnancy rates than anestrous cows treated with either synchronization protocol (21.7 vs. 40.7%; P < 0.05). However, regardless of treatment with CIDR, cows submitted to TAI protocol had greater (P < 0.05) pregnancy rates at 30 (54.8 vs. 11.2%), 60 (72.1 vs. 38.8%), and 90 d (82.0 vs. 57.9%) of breeding season than untreated cows.