Chemical composition and accumulation rates of chemical elements in metalliferous sediments from axial zones of the East Pacific Rise and the Mid-Atlantic Ridge

In the monograph metalliferous sediments of the East Pacific Rise near 21°S are under consideration. Distribution trends of chemical, mineral and grain size compositions of metalliferous sediments accumulated near the axis of this ultrafast spreading segment of the EPR are shown. On the basis of lithological and geochemical investigations spatial and temporal variations of hydrothermal activity are estimated. Migration rates of hydrothermal fields along the spreading axis are calculated. The model of cyclic hydrothermal process is suggested as a result of tectono-magmatic development of the spreding centre.

Chemical, isotope and mineral composition of hydrothermally altered upper oceanic crust drilled at ODP Site 129-801C

ODP Hole 801C penetrates >400 m into 170-Ma oceanic basement formed at a fast-spreading ridge. Most basalts are slightly (10-20%) recrystallized to saponite, calcite, minor celadonite and iron oxyhydroxides, and trace pyrite. Temperatures estimated from oxygen isotope data for secondary minerals are 5-100°C, increasing downward. At the earliest stage, dark celadonitic alteration halos formed along fractures and celadonite, and quartz and chalcedony formed in veins from low-temperature (<100°C) hydrothermal fluids. Iron oxyhydroxides subsequently formed in alteration halos along fractures where seawater circulated, and saponite and pyrite developed in the host rock and in zones of restricted seawater flow under more reducing conditions. Chemical changes include variably elevated K, Rb, Cs, and H2O; local increases in FeT, Ba, Th, and U; and local losses of Mg and Ni. Secondary carbonate veins have 87Sr/86Sr = 0.706337 - 0.707046, and a negative correlation with d18O results from seawater-basalt interaction. Carbonates could have formed at any time since the formation of Site 801 crust. Variable d13C values (-11.2? to 2.9?) reflect the incorporation of oxidized organic carbon from intercalated sediments and changes in the d13C of seawater over time. Compared to other oceanic basements, a major difference at Site 801 is the presence of two hydrothermal silica-iron deposits that formed from low-temperature hydrothermal fluids at the spreading axis. Basalts associated with these horizons are intensely altered (60-100%) to phyllosilicates, calcite, K-feldspar, and titanite; and exhibit large increases in K, Rb, Cs, Ba, H2O, and CO2, and losses of FeT, Mn, Mg, Ca, Na, and Sr. These effects may be common in crust formed at fast-spreading rates, but are not ubiquitous. A second important difference is that the abundance of brown oxidation halos along fractures at Site 801 is an order of magnitude less than at some other sites (2% vs. 20-30%). Relatively smooth basement topography (<100 m) and high sedimentation rate (8 m/Ma) probably restricted the access of oxygenated seawater. Basement lithostratigraphy and early low-temperature hydrothermal alteration and mineral precipitation in fractures at the spreading axis controlled permeability and limited later flow of oxygenated seawater to restricted depth intervals.

Description and chemical composition of manganese nodules sampled during the R/V "Vityaz" Expedition Vityaz-35

This paper presents data on the chemical composition of iron-manganese nodules and associated sediments collected during the 35th voyage of the R/V "Vityaz" in 1962. The samples were made available to the author by Prof, P. L. Bezrukov. Data on the general distribution of manganese nodules at the bottom of the Indian Ocean were already given by P. L. Bezrukov (1962, 1963). Here the author analyzed the geochemistry of nodules samples from seven stations and four samples from the associated sediments. The analysis separates the outer layer of nodules from their apparent internal core.

Sulfur concentrations and isotopic composition of serpentinized oceanic peridotites

The mineralogy, contents, and isotopic compositions of sulfur in oceanic serpentinites reflect variations in temperatures and fluid fluxes. Serpentinization of <1 Ma peridotites at Hess Deep occurred at high temperatures (200°-400°C) and low water/rock ratios. Oxidation of ferrous iron to magnetite maintained low fO2 and produced a reduced, low-sulfur assemblage including NiFe alloy. Small amounts of sulfate reduction by thermophilic microbes occurred as the system cooled, producing low-delta34S sulfide (1.5? to -23.7?). In contrast, serpentinization of Iberian Margin peridotites occurred at low temperatures(~20°-200°C) and high water/rock ratios. Complete serpentinization and consumption of ferrous iron allowed evolution to higher fO2. Microbial reduction of seawater sulfate resulted in addition of low-delta34S sulfide (~15 to ~43?) and formation of higher-sulfur assemblages that include valleriite and pyrite. The high SO4/total S ratio of Hess Deep serpentinites (0.89) results in an increase of total sulfur and high delta34S of total sulfur (mean ~8?). In contrast, Iberian Margin serpentinites gained large amounts of 34S-poor sulfide (mean total S = 3800 ppm), and the high sulfide/total S ratio (0.61) results in a net decrease in delta34S of total sulfur (mean ~ -5?). Thus serpentinization is a net sink for seawater sulfur, but the amount fixed and its isotopic composition vary significantly. Serpentinization may result in uptake of 0.4-14 * 10**12 g S/yr from the oceans, comparable to isotopic exchange in mafic rocks of seafloor hydrothermal systems and approaching global fluxes of riverine sulfate input and sedimentary sulfide output.

(Table 1) Chemical composition of volcanic rocks from the Mariisky sequence and extrusive vent rocks of the Mary Cape, Schmidt Peninsula (North Sakhalin)

Early Cretaceous volcanic rocks of the Mariisky sequence and Early Cenozoic extrusive-vent rocks of the Mary Cape are exposed at the most northwest of the Schmidt Peninsula, North Sakhalin. In chemical composition, all the rocks are subdivided into four groups. Three groups include volcanic rocks of the Mariisky sequence, which consists, from bottom to top, of calc-alkaline rocks, transitional calc-alkaline-tholeiite rocks, and incompatible element-depleted tholeiites. These rocks show subduction geochemical signatures and are considered as a fragment of the Moneron-Samarga island arc system. Trace-element modeling indicates their derivation through successive melting of a garnet-bearing mantle and garnet-free shallower mantle sources containing amphibole; pyroxene; and, possibly, spinel. The mixed subduction and intra-plate characteristics of the extrusive vent rocks of the Mary Cape attest to their formation in a transform continental margin setting.

Biogenic and mineral composition and foraminiferal stratigraphy of sediment cores obtained in northern Germany

The Ratekau boring ended in clays of the so-called Asterigerina-Zone; these clays have shallow-water features in the uppermost samples. The clays are overlain by deep-water clays with pteropods; this formation is split into two parts by a shallow-water deposit. The fossiliferous series ends upward in sandy deposits with shallow-water fossils. The question is raised whether the two deep-water deposits might correspond to the Lower Doberg Beds (Eochattian) and the Upper Doberg Beds (Neochattian) at the Doberg hill, closer to the rim of the basin. All fossiliferous samples from this boring are thought to be of Late Oligocene age; the boundary towards the Middle Oligocene, however, could not be ascertained. The Vaale boring ended in rather typical Septaria clay of the Middle Oligocene. This clay is capped by some metres of unfossiliferous glauconite clays, which in turn are overlain by silts and silty clays with planktonic fossils identical to those found at Dingden locality. These deposits are tentatively dated as Early Miocene. The next higher series of samples consists of sands and clays deposited in shallower waters. They contain a rich fauna of benthic molluscs, which, according to the current notion in stratigraphy, would have a Reinbek Age. In addition, they contain a set of planktonic fossils which differs from the 'Lower Miocene' assemblages. These sands and clays are overlain by a thick series of marine sands very poor in fossils. Finally, four metres of clay with foraminifera, having Younger Miocene affinities, form the top of the fossiliferous sequence. The borings at Wulksfelde and Langenhorn were not far apart and their sediments are easily correlated. Both wells start below in continental 'Lignite Sands' and contain overlying shallow water sands and clays. These yielded Hemmoor benthic mollusca, supposed to indicate Lower Miocene in the relevant literature; however, we encountered their planktonic foraminifera in the uppermost Miocene as well. The same planktonic species were found in all samples of both borings. These deposits under discussion furthermore contain a particular pteropod species. They are overlain by a thick series of gypsiferous clays, with scarce fossils. The uppermost fossiliferous clays (probably Langenfelde Age) contain another pteropod species, not met with in other samples. The discrepancies between the plankton zonation and the traditional subdivision according to benthic molluscs in the borings of Vaale, Wulksfelde and Langenhorn (and in samples from Twistringen, Dingden and Antwerp localities as well) renders the time-stratigraphic value of the denominations Reinbek and Hemmoor rather doubtful. The samples of the Westerland boring can be placed in the Gram and Sylt stages of local chronostratigraphy on the strength of the Astarte series established by HINSCH. The Gram samples contain a typical pteropod species; both groups of samples contain the same planktonic foraminifera as the borings Wulksfelde and Langenhorn. Our material did not bring the problem of the Miocene-Pliocene boundary in this region any closer to a solution. In conclusion, it can be claimed that this investigation provides strong arguments that the usual recognition of Hemmoor and Reinbek does not correspond to well-defined chronostratigraphical units. A better chronostratigraphic subdivision has to be based on the examination of many more samples, and on a better understanding of the paleoecology of the fossils involved.

(Table 1) Composition of bottom sediments and pore waters from the West Africa shelf

Organic and mineral phosphorus (P_org and P_min) have been determined in pore waters of terrigenous, biogenous, as well as weakly phosphatic and phosphatic sediments from the shelf of the West Africa (in 30 samples). Concentrations of P_min in the pore waters have been examined in close relation to grain size and chemical composition (amounts of P and N_org) of solid phase of the sediments. It has been demonstrated that among sands and coarse silts, maximum concentrations of P_min (up to 1.7 mg/l) in the pore waters have been observed in weakly phosphatic and phosphatic sediments rich in organic matter of the highly productive shelf of the Southwest Africa. Concentrations of P_min in the pore waters are most clearly associated with contents of N_org in the solid phase of the sediments (correlation coefficient R = 0.71) and P_org in the pore waters (R = 0.78).

Isotopic ratios, concentration of noble gases and mineral and bulk composition of extraterrestrial dust particles in Dome Fuji ice core, East Antarctica

Two silicate-rich dust layers were found in the Dome Fuji ice core in East Antarctica, at Marine Isotope Stages 12 and 13. Morphologies, textures, and chemical compositions of constituent particles reveal that they are high-temperature melting products and are of extraterrestrial origin. Because similar layers were found ~2000 km east of Dome Fuji, at EPICA (European Project for Ice Coring in Antarctica)-Dome C, particles must have rained down over a wide area 434 and 481 ka. The strewn fields occurred over an area of at least 3 × 10**6 km**2. Chemical compositions of constituent phases and oxygen isotopic composition of olivines suggest that the upper dust layer was produced by a high-temperature interaction between silicate-rich melt and water vapor due to an impact explosion or an aerial burst of a chondritic meteoroid on the inland East Antarctic ice sheet. An estimated total mass of the impactor, on the basis of particle flux and distribution area, is at least 3 × 10**9 kg. A possible parent material of the lower dust layer is a fragment of friable primitive asteroid or comet. A hypervelocity impact of asteroidal/cometary material on the upper atmosphere and an explosion might have produced aggregates of sub-µm to µm-sized spherules. Total mass of the parent material of the lower layer must exceed 1 × 10**9 kg. The two extraterrestrial horizons, each a few millimeters in thickness, represent regional or global meteoritic events not identified previously in the Southern Hemisphere.