The influence of lone-pair repulsions on C–C bond lengths: a critical evaluation of the experimental and theoretical evidence

X-Ray structural data, as well as semiempirical and ab initio molecular orbital calculations, reveal no systematic and substantial difference between the C–C bond lengths of cis and trans 1,2-diketones. Additional results on various conformations of 1,2-diimines and 1,2-dithiones follow the same pattern. Therefore, lone-pair repulsions cannot be implicated in the observed lengthening of C–C bonds in isatin and several related molecules. Conjugation in these systems occurs peripherally avoiding the participation of the central C–C bond. Negative hyperconjugative interaction between the oxygen lone pairs and the adjacent C–C σ* orbital is suggested to be the principal reason for the relatively long C–C bond in diketones. This effect is found in both the cis and trans conformations.

Experimental analysis of thermo-physical processes in acoustically levitated heated droplets

An experimental setup using radiative heating has been used to understand the thermo-physical phenomena and chemical transformations inside acoustically levitated cerium nitrate precursor droplets. In this transformation process, through infrared thermography and high speed imaging, events such as vaporization, precipitation and chemical reaction have been recorded at high temporal resolution, leading to nanoceria formation with a porous morphology. The cerium nitrate droplet undergoes phase and shape changes throughout the vaporization process. Four distinct stages were delineated during the entire vaporization process namely pure evaporation, evaporation with precipitate formation, chemical reaction with phase change and formation of final porous precipitate. The composition was examined using scanning and transmission electron microscopy that revealed nanostructures and confirmed highly porous morphology with trapped gas pockets. Transmission electron microscopy (TEM) and high speed imaging of the final precipitate revealed the presence of trapped gases in the form of bubbles. TEM also showed the presence of nanoceria crystalline structures at 70 degrees C. The current study also looked into the effect of different heating powers on the process. At higher power, each phase is sustained for smaller duration and higher maximum temperature. In addition, the porosity of the final precipitate increased with power. A non-dimensional time scale is proposed to correlate the effect of laser intensity and vaporization rate of the solvent (water). The effect of acoustic levitation was also studied. Due to acoustic streaming, the solute selectively gets transported to the bottom portion of the droplet due to strong circulation, providing it rigidity and allows it become bowl shaped. (C) 2010 Elsevier Ltd. All rights reserved.

Microbiological characterisation of soils : Evaluation of some critical steps in data collection and experimental design

The study of soil microbiota and their activities is central to the understanding of many ecosystem processes such as decomposition and nutrient cycling. The collection of microbiological data from soils generally involves several sequential steps of sampling, pretreatment and laboratory measurements. The reliability of results is dependent on reliable methods in every step. The aim of this thesis was to critically evaluate some central methods and procedures used in soil microbiological studies in order to increase our understanding of the factors that affect the measurement results and to provide guidance and new approaches for the design of experiments. The thesis focuses on four major themes: 1) soil microbiological heterogeneity and sampling, 2) storage of soil samples, 3) DNA extraction from soil, and 4) quantification of specific microbial groups by the most-probable-number (MPN) procedure. Soil heterogeneity and sampling are discussed as a single theme because knowledge on spatial (horizontal and vertical) and temporal variation is crucial when designing sampling procedures. Comparison of adjacent forest, meadow and cropped field plots showed that land use has a strong impact on the degree of horizontal variation of soil enzyme activities and bacterial community structure. However, regardless of the land use, the variation of microbiological characteristics appeared not to have predictable spatial structure at 0.5-10 m. Temporal and soil depth-related patterns were studied in relation to plant growth in cropped soil. The results showed that most enzyme activities and microbial biomass have a clear decreasing trend in the top 40 cm soil profile and a temporal pattern during the growing season. A new procedure for sampling of soil microbiological characteristics based on stratified sampling and pre-characterisation of samples was developed. A practical example demonstrated the potential of the new procedure to reduce the analysis efforts involved in laborious microbiological measurements without loss of precision. The investigation of storage of soil samples revealed that freezing (-20 °C) of small sample aliquots retains the activity of hydrolytic enzymes and the structure of the bacterial community in different soil matrices relatively well whereas air-drying cannot be recommended as a storage method for soil microbiological properties due to large reductions in activity. Freezing below -70 °C was the preferred method of storage for samples with high organic matter content. Comparison of different direct DNA extraction methods showed that the cell lysis treatment has a strong impact on the molecular size of DNA obtained and on the bacterial community structure detected. An improved MPN method for the enumeration of soil naphthalene degraders was introduced as an alternative to more complex MPN protocols or the DNA-based quantification approach. The main advantage of the new method is the simple protocol and the possibility to analyse a large number of samples and replicates simultaneously.

Experimental evaluation of the aeroacoustic characteristics of a source of pulsating gas flow

Amongv arioums ethodtsh,e t ransmissliionne o r thei mpedantcueb em ethohda sb eenm ospt opulafro r thee xperimenetavla luatioonf thea cousticiaml pedanocef a terminatioTnh. ee xistinmg ethodisn,c luding theo nesre porteeda rlierb, y thea uthorrse quirleo catioonf thes oundp ressumrei nima nd/orm axima, or elsem akeu se0 f somei terativep rocedureTsh. e presenpt aperd ealsw ith a methodo f analysios f standinwga vews hichd oesn otd epenodn anyo f thesein volvepdr ocedureIts i.s applicabtloe thec aseo f stationarays w ella sm ovingm ediaI.t enableosn to evaluatteh e impedancoef anyp assivbel ackb ox,a s well as the aeroacoustcich aracteristicosf a sourceo f pulsatingg asf low, with the leaste xperimentawl ork andc omputatiotinm ea ndw itht hee xtraa dvantagoef usinga givenim pedanctueb ef or wavelengtahss largea s fourt imesit s lengthA. methodo f externaml easuremenntost, involvinugs eo f anyi mpedance tubef, or evaluatintgh ea eroacouscthica racteristoicf as sourcoef pulsatingga sf lowi s alsod ealtw ith, based on the definition of attenuation or insertion loss of a muffler.

Making Music, Making Muslims : A Case Study of Islamic Hip Hop and the Discursive Construction of Muslim Identities on the Internet

Hip-hopin juuret juontavat 1970-luvulle Yhdysvaltoihin, mutta hip-hop-kulttuuri ja musiikkityyli ovat sen jälkeen levinneet ympäri maailmaa osana globalisaatiokehitystä. Myös monet nuoret muslimit tekevät nykyään hip-hop-musiikkia, ja yhä useampi tuo myös sanoituksiinsa vaikutteita Islamista ja elämästään muslimina. Musiikin asema on islamissa varsin kiistelty, eikä sitä ole selvästi sallittu (halal) tai kielletty (haram) muslimeilta. Muslimien tekemää hip-hoppia on toistaiseksi tutkittu hyvin vähän. Tutkielmassa tarkastellaan diskurssianalyysin keinoin, miten tapaustutkimuksena toimivalla muslimhiphop.com-internetsivustolla argumentoidaan ja konstruoidaan käsityksiä muslimi-identiteetistä. Teoreettisena ja analyyttisenä viitekehyksenä toimii sosiaalikonstruktivistinen näkemys identiteetistä kontekstisidonnaisena sekä puheessa ja teksteissä diskursiivisesti rakentuvana. Tutkielma kyseenalaistaa aiempien tutkimusten oletuksen hip-hopista vaikutuksiltaan yksinomaan positiivisena muslimi-identiteetille sekä muslimeja yhdentävänä tekijänä. Aineisto on kerätty edellä mainitulta sivustolta syksyn 2010 ja kevään 2011 aikana, josta analyysiin on rajattu vain itse sivusto ja sen hip-hoppia käsittelevät osiot. Sivusto ja sen perustaja ovat yhdysvaltalaisia, mutta sivustolla esiteltävien artistien tausta on hyvin monikulttuurinen. Moni on myös maahanmuuttajana nykyisessä kotimaassaan. Aineistossa esiintyviä teemoja ja diskursseja eritellään ja analysoidaan tutkielmassa lainauksien avulla. Sivuston periaatteissa ja artistien esillepääsyn kriteereissä määritellään tarkasti asennoituminen Islamin ja musiikin yhdistämiseen: mikäli sanoitukset ja artistit noudattavat Islamin oppeja, on muslimin sallittua tehdä ja kuunnella tällaista musiikkia. Islam-aiheisen hip-hopin perustellaan olevan ennen kaikkea vaihtoehto valtavirran hip-hopille, jota konstruoidaan aineistossa moraalisesti arveluttavaksi. Hip-hopille sekä muslimeille sallittuja ja kiellettyjä elementtejä erottelevan halal-haram-diskurssin ohella aineistosta nousee esiin opetusdiskurssi. Muslimien tekemän hip-hopin perustellaan edistävän Islamin opettamista erityisesti nuorille muslimeille ja siten vahvistavan positiivista muslimi-identiteettiä. Myös positiivisen muutoksen diskurssia käytetään aineistossa runsaasti liittyen mm. muslimiyhteisöihin sekä muslimeihin kohdistuviin taloudellisiin ja sosiaalipoliittisiin epäkohtiin ja stereotypioihin; musiikin sisältöä ja sen tekemistä perustellaan sen voimalla muuttaa asioita parempaan suuntaan. Monet muslimiartistit kamppailevat yhdistääkseen toisaalta Islamin ja taiteellisen luovuuden ja ilmaisuvapauden, toisaalta menestyäkseen kaupallisesti unohtamatta uskonnollista vakaumustaan. Monilla heistä hip-hop on ollut vahvasti läsnä kasvuympäristössä, mutta sen yhdistäminen Islamin periaatteisiin aiheuttaa kysymyksiä ja kyseenalaistuksia oman musiikillisen ja uskonnollisen identiteetin muodosta ja sisällöstä. Aineiston perusteella monet muslimiartistit ja Islam-aiheista hip-hoppia kuuntelevat muslimit joutuvat jatkuvasti puolustamaan musiikkia siihen kielteisesti suhtautuville muslimeille sekä ei-muslimeille, jotka vierastavat sen uskonnollisuutta. Muslimi-identiteettiä neuvotellaan jatkuvasti, ja se näyttäytyy aineistossa moniulotteisena ja tilanteisesti rakentuvana. Avainsanat: Muslimit, Islam, hip-hop, identiteetti, Internet, diskurssi, diskurssianalyysi

Nature of Cl center dot center dot center dot Cl Intermolecular Interactions via Experimental and Theoretical Charge Density Analysis:Correlation of Polar Flattening Effects with Geometry

The experimental charge density distribution in three compounds, 2-chloro-3-quinolinyl methanol, 2-chloro-3-hydroxypyridine, and 2-chloro-3-chloromethyl-8-methylquinoline, has been obtained using high-resolution X-ray diffraction data collected at 100 K based on the aspherical multipole modeling of electron density. These compounds represent type I (cis), type I (trans), and type II geometries, respectively, as defined for short Cl center dot center dot center dot Cl interactions. The experimental results are compared with the theoretical charge densities using theoretical structure factors obtained from a periodic quantum calculation at the B3LYP/6-31G** level. The topological features derived from the Bader's theory of atoms in molecules (AIM) approach unequivocally suggest that both cis and trans type I geometries show decreased repulsion, whereas type II geometry is attractive based on the nature of polar flattening of the electron density around the Cl atom.

Numerical and experimental study of the thermal behaviour of coining and upsetting processes

A numerical simulation technique has been employed to study the thermal behavior of hot-forging type forming processes. Experiments on the coining and upsetting of an aluminum billet were conducted to validate the numerical predictions. Typical forming conditions for both the coining and upsetting processes were then studied in detail. an electrical analogy scheme was used to determine the thermal contact resistance. This scheme can conviniently provide the interface characteristics for typical processing conditions, which normally involve high pressures and temperatures. A single forging cycle was first considered, and then a batch of twenty-five forgings was studied. Each forging cycle includes the billet mounting, ascent, loading, dwelling, unloading, descent, and billet removal stages. The temperature distribution in the first forging to be formed is found to be significantly different from that at the end of the batch. In industry, forging is essentially a batch operation. The influence of forming speed and reduction on thermal characteristics was investigated also. The variations that can occur in the process design by considering differences in temperature characteristics are discussed also.

Studies on helium flow in experimental loops with different impedances operated with fountain effect pumps

An experimental flow loop with He II flow driven by fountain effect pumps (FEPs) is studied with respect to operation at different flow impedances and with thermal loads applied at different positions. The measured values of temperature, flow rate and pressure drop are compared with calculations resulting from a simplified model which assumes ideal performance of the porous plug and of the heat exchangers and which does not take into account Gorter-Mellink (GM) conduction. The main features of the loop are shown to be well described by this model. Refined calculations with a more complex model, including GM conduction of the He II, are only required for predicting the temperature distribution in some discrete regions of the loop.

Theoretical and experimental investigation of framed structure-layered soil interaction problems

The plane stress solution for the interaction analysis of a framed structure, with a foundation beam, resting on a layered soil has been studied using both theoretical and photoelastic methods. The theoretical analysis has been done by using a combined analytical and finite element method. In this, the analytical solution has been used for the semi-infinite layered medium and finite element method for the framed structure. The experimental investigation has been carried out using two-dimensional photoelasticity in which modelling of the layered semi-infinite plane and a method to obtain contact pressure distribution have been discussed. The theoretical and experimental results in respect of contact pressure distribution between the foundation beam and layered soil medium, the fibre stresses in the foundation beam and framed structure have been compared. These results have also been compared with theoretical results obtained by idealizing the layered semi-infinite plane as (a) a Winkler model and (b) an equivalent homogeneous semi-infinite medium