Rejeito de xisto como adsorvente para remoção de fenol em águas produzidas na indústria de petróleo

Produced water is the main effluent linked to the activity of extraction of oil and their caring management is necessary due to the large volume involved, to ensure to minimize the negative impacts of discharges of these waters in the environment. This study aimed to analyze the use of retorted shale, which is a reject from the pyrolysis of pirobituminous shale, as adsorbent for the removal of phenols in produced water. The material was characterized by different techniques (grain sized analysis, thermal analysis, BET, FRX, FT-IR, XRD and SEM), showing the heterogeneity in their composition, showing its potential for the removal of varied compounds, as well as the phenols and their derivatives. For the analysis of the efficiency of the oil shale for the adsorption process, assays of adsorption balance were carried through, and also kinetic studies and dynamics adsorption, in the ETE of the UTPF of Petrobras, in Guamaré-RN. The balance assays shown a bigger conformity with the model of Langmuir and the kinetic model more adjusted to describe the adsorption of phenols in retorted shale was of pseudo-second order. The retorted shale presented a low capacity of adsorption of phenols (1,3mg/g), when related to others conventional adsorbents, however it is enough to the removal of these composites in concentrations presented in the produced water of the UTPF of Guamaré. The assays of dynamics adsorption in field had shown that the concentration of phenol in the effluent was null until reaching its rupture (58 hours). The results showed the possibility of use of the reject for removal of phenols in the final operations of the treatment process, removing as well, satisfactorily, the color and turbidity of the produced water, with more than 90% of removal

Contribuição ao desenvolvimento de ontologias para processos petroquímicos : estudo de caso em uma planta DEA

In the last decades, the oil, gas and petrochemical industries have registered a series of huge accidents. Influenced by this context, companies have felt the necessity of engaging themselves in processes to protect the external environment, which can be understood as an ecological concern. In the particular case of the nuclear industry, sustainable education and training, which depend too much on the quality and applicability of the knowledge base, have been considered key points on the safely application of this energy source. As a consequence, this research was motivated by the use of the ontology concept as a tool to improve the knowledge management in a refinery, through the representation of a fuel gas sweetening plant, mixing many pieces of information associated with its normal operation mode. In terms of methodology, this research can be classified as an applied and descriptive research, where many pieces of information were analysed, classified and interpreted to create the ontology of a real plant. The DEA plant modeling was performed according to its process flow diagram, piping and instrumentation diagrams, descriptive documents of its normal operation mode, and the list of all the alarms associated to the instruments, which were complemented by a non-structured interview with a specialist in that plant operation. The ontology was verified by comparing its descriptive diagrams with the original plant documents and discussing with other members of the researchers group. All the concepts applied in this research can be expanded to represent other plants in the same refinery or even in other kind of industry. An ontology can be considered a knowledge base that, because of its formal representation nature, can be applied as one of the elements to develop tools to navigate through the plant, simulate its behavior, diagnose faults, among other possibilities

Uma metodologia para a análise do desempenho sustentável dos postos de revenda de combustível na cidade de Natal/RN, com o uso de data envelopment analysis-DEA

The increasing use of fossil fuels in line with cities demographic explosion carries out to huge environmental impact in society. For mitigate these social impacts, regulatory requirements have positively influenced the environmental consciousness of society, as well as, the strategic behavior of businesses. Along with this environmental awareness, the regulatory organs have conquered and formulated new laws to control potentially polluting activities, mostly in the gas stations sector. Seeking for increasing market competitiveness, this sector needs to quickly respond to internal and external pressures, adapting to the new standards required in a strategic way to get the Green Badge . Gas stations have incorporated new strategies to attract and retain new customers whom present increasingly social demand. In the social dimension, these projects help the local economy by generating jobs and income distribution. In this survey, the present research aims to align the social, economic and environmental dimensions to set the sustainable performance indicators at Gas Stations sector in the city of Natal/RN. The Sustainable Balanced Scorecard (SBSC) framework was create with a set of indicators for mapping the production process of gas stations. This mapping aimed at identifying operational inefficiencies through multidimensional indicators. To carry out this research, was developed a system for evaluating the sustainability performance with application of Data Envelopment Analysis (DEA) through a quantitative method approach to detect system s efficiency level. In order to understand the systemic complexity, sub organizational processes were analyzed by the technique Network Data Envelopment Analysis (NDEA) figuring their micro activities to identify and diagnose the real causes of overall inefficiency. The sample size comprised 33 Gas stations and the conceptual model included 15 indicators distributed in the three dimensions of sustainability: social, environmental and economic. These three dimensions were measured by means of classical models DEA-CCR input oriented. To unify performance score of individual dimensions, was designed a unique grouping index based upon two means: arithmetic and weighted. After this, another analysis was performed to measure the four perspectives of SBSC: learning and growth, internal processes, customers, and financial, unifying, by averaging the performance scores. NDEA results showed that no company was assessed with excellence in sustainability performance. Some NDEA higher efficiency Gas Stations proved to be inefficient under certain perspectives of SBSC. In the sequence, a comparative sustainable performance and assessment analyzes among the gas station was done, enabling entrepreneurs evaluate their performance in the market competitors. Diagnoses were also obtained to support the decision making of entrepreneurs in improving the management of organizational resources and promote guidelines the regulators. Finally, the average index of sustainable performance was 69.42%, representing the efforts of the environmental suitability of the Gas station. This results point out a significant awareness of this segment, but it still needs further action to enhance sustainability in the long term

Mapeamento das formas do relevo para estimativa de custos de fertilização em cana-de-açúcar

A modelagem matemática associada ao conhecimento da variabilidade dos atributos do solo e mapeamento das formas do relevo pode auxiliar no manejo da fertilidade do solo em usinas sucroalcooleiras. O presente trabalho teve como objetivo avaliar o uso da geoestatística e da modelagem matemática na estimativa de custos de fertilização, em diferentes formas do relevo. em uma área de 200 ha, foram identificadas duas formas de relevo, uma côncava e outra convexa, sendo os solos coletados nos pontos de cruzamento de uma malha, com intervalos regulares de 50 m, perfazendo um total de 623 pontos. As amostras foram submetidas a análises químicas, e, posteriormente, os dados foram avaliados por meio da estatística descritiva, geoestatística e modelagem matemática. Os resultados mostraram que, quando as formas do relevo são incorporadas às análises geoestatística e de modelagem matemática, ocorre aumento na eficiência de aplicação do calcário, fósforo e potássio no solo.

A Eficácia dos direitos fundamentais nos contratos civis e de consumo: uma teoria contratual baseada na colisão dos direitos ou bens constitucionalmente protegidos

The apparent virtuosity that if could wait of the globalization and the neoliberalism has given signals of deterioration in the contractual relations, especially in contracts of mass consumption, generating innumerable offensive situations to the basic rights and the goods constitutionally protected of the contractors. In the world of today, still that it does not reveal any desire, the individual practically is compelled to contract, for force of necessities and customs completely imposed, mainly in face of the essentiality of the services or agreed to goods. Ahead of as much and unexpected changes in the civil liames and of consumption, dictated for the globalization, it comes to surface the reflection if the private law e, more specifically, the civil law, meet prepared adequately to deal with these new parameters of the economy. The present dissertation has the intention to investigate if the globalization and the consequent neoliberalism, in this beginning of third millennium, will imply to revive of the principles and the basics paradigms of the contracts that consolidated and had kept, for more than two centuries, the liberal State. One notices that the study of this phenomenon it gains importance to the measure where if it aggravates the decline of the social State (Welfare State), with the embrittlement and the loss of the autonomy of the state authority, over all in countries of delayed modernity, as it is the case of Brazil, that presents deep deficiencies to give or to promote, with a minimum of quality and efficiency, essential considered public services to the collective and that if they find consecrated in the Federal Constitution, as basic rights or as goods constitutionally protecting, the example of the health, the education, the housing, the security, the providence, the insurance, the protection the maternity, the infancy and of aged and deficient. To the end, the incidence of constant basic rights of the man in the Constitution is concluded that, in the process of interpretation of the right contractual conflicts that have as object rights or goods constitutionally proteges, in the universe of the globalized perhaps economy and of the neoliberalismo, it consists in one of the few ways - unless the only one - that still they remain to over all deal with more adequately the contractual relations, exactly that if considers the presence of clauses generalities in the scope of the legislation infraconstitutional civil and of consumption, front the private detainers of social-economic power. To be able that it matters necessarily in disequilibrium between the parts, whose realignment depends on the effect and the graduation that if it intends to confer to the basic right in game in the private relation. The Constitution, when allowing the entailing of the basic rights in the privates relations, would be assuming contours of a statute basic of all the collective, giving protection to the man against the power, if public or independently private

A eficiência do gasto e da qualidade da saúde pública: uma análise nos municípios do estado do Rio Grande do Norte (2004 e 2008)

The overall objective of this study is to analyze the efficiency in the use of resources and the quality of public health in the municipalities of Rio Grande do Norte, from 2004 to 2008. It also seeks to identify the determinants of municipal inefficiency and measure the productivity of public spending on health. To this end, three methods of analysis are used: the DEA, the Malmquist index and the Tobit regression model. Among other findings, it appears that municipalities considered more inefficient in the measurement of expenditure on health make the largest expense in this function. On the other hand, from 2004 to 2008, only 13 municipalities showed an increase in the productivity of public spending. It is also noted that municipalities considered efficient in quality of health, although having more physical and human resources, offer fewer health services to the population. In all, the major determinants of health spending inefficiencies are the variables: age of the mayor, coalition, population density, literacy race and budget revenues. Regarding the inefficiency of the health quality, variables such as: coalition, literacy race have strong influence on this behavior. Thereby, the hypotheses proposed by the study have been fully accepted. In other words, for the efficiency of the quality and health spending it is needed more than resources, i.e., the expenditure shows itself as essential, but not enough, for political and economic aspects also interfere with the performance of spent and in the quality of health care offered to the population

Eficiência nos gastos públicos em educação fundamental: uma análise nos municípios do estado do Rio Grande do Norte, 2007 e 2011

This paper aims to measure the degree of efficiency in the allocation of public resources in education from the FUNDEB in elementary education in the towns of Rio Grande do Norte in 2007 and 2011. To do so, we must determine to evaluate the efficiency in the allocation of public resources in municipal education in the early and last grades of elementary education; verify that the towns that achieved higher levels of efficiency that were allocated the largest volumes of resources in primary education and analyze which towns reached the worst and the best levels of efficiency in the allocation of public resources in education. This is on the assumption that the relation between the educational policies of local governments and concern for efficiency in the allocation of resources in education is limited only to increase spending on education. It is intended from the model of Data Envelopment analysis, (DEA), with Variable Returns to Scale (VRS), estimate the efficiency of spending on education and municipal pubic purging the problem of outliers. Estimations show that the municipalities of Rio Grande do Norte do not allocate their resources in public elementary education efficiently

Eficiência de um hidrociclone de geometria rietema para pré-filtragem de água para irrigação

O hidrociclone é um equipamento amplamente utilizado pela indústria em processos envolvendo separação sólido-líquido, porém ainda pouco utilizado na agricultura irrigada no Brasil. Neste trabalho, avaliou-se o desempenho deste equipamento como pré-filtrante de partículas sólidas, oriundas dos processos erosivos e do assoreamento dos recursos hídricos. Os testes foram realizados com um hidrociclone de geometria Rietema, possuindo diâmetro de 19,2 cm na parte cilíndrica, operando com vazões variando entre 10 m³ h-1 e 27 m³ h-1. Os materiais particulados usados em suspensão foram: solo franco-argiloso e areia de rio. Os resultados mostraram que a perda de carga máxima média foi de 52 kPa e 47 kPa para as suspensões aquosas de areia e solo, respectivamente. Seu melhor desempenho ocorreu operando com suspensão aquosa de areia, apresentando eficiência total de 92,3% para a vazão de 26,9 m³ h-1. Concluiu-se que o equipamento avaliado é mais eficiente para remoção de partículas de areia, podendo ser utilizado como pré-filtro em sistemas de irrigação.

Desenvolvimento de um sistema de planejamento, gestão de serviços e controle de custos em obras de construção civil

The increasing competitiveness of the construction industry, set in an economic environment in which the offer is now greater than the demand , causes the prices of many products and services, are strongly influenced by the processes of production and the final consumer. Thus, to become more competitive in the market and construction companies are seeking new alternatives to reduce and control costs, production processes and tools that allow for close monitoring of the construction schedule, with the consequent compliance deadline with the client. Based on this scenario, the creation of control tools, service management and planning work emerges as an investment opportunity and an area that can promote great benefits to construction companies. The goal of this work is to present a system of planning, service management and costs control that through worksheets provide information relating to the production phase of the work, allowing the visualization of possible irregularities in the planning and cost of the enterprise, enabling the company to take steps to achieve the goals of the enterprise in question, and correct them when necessary. The developed system has been used in a piece of real estate in Rio Grande do Norte, and the results showed that its use together allowed the construction company to accompany their results and take corrective and preventive actions during the production process, efficiently and effective

Avaliação de economias de escala e escopo no desempenho de equipes de serviços aplicando Análise de Envoltória de Dados DEA: um estudo em Empresa de Telecomunicações no Brasil

This Master s Thesis proposes the application of Data Envelopment Analysis DEA to evaluate economies of scale and economies of scope in the performance of service teams involved with installation of data communication circuits, based on the study of a major telecommunication company in Brazil. Data was collected from the company s Operational Performance Division. Initial analysis of a data set, including nineteen installation teams, was performed considering input oriented methods. Subsequently, the need for restrictions on weights is analyzed using the Assurance Region method, checking for the existence of zero-valued weights. The resulting returns to scale are then verified. Further analyses using the Assurance Region Constant (AR-I-C) and Variable (AR-I-V) models verify the existence of variable, rather than constant, returns to scale. Therefore, all of the final comparisons use scores obtained through the AR-I-V model. In sequence, we verify if the system has economies of scope by analyzing the behavior of the scores in terms of individual or multiple outputs. Finally, conventional results, used by the company in study to evaluate team performance, are compared to those generated using the DEA methodology. The results presented here show that DEA is a useful methodology for assessing team performance and that it may contribute to improvements on the quality of the goal setting procedure.

Análise de retorno de escala e tamanho do mercado no desempenho de equipes de vendas aplicando análise de envoltória de dados DEA: um estudo em empresa de Telecomunicações no Brasil

This Master s Thesis proposes the application of Data Envelopment Analysis DEA to evaluate the performance of sales teams, based on a study of their coverage areas. Data was collected from the company contracted to distribute the products in the state of Ceará. Analyses of thirteen sales coverage areas were performed considering first the output-oriented constant return to scale method (CCR-O), then this method with assurance region (AR-O-C) and finally the method of variable returns to scale with assurance region (AR-O-V). The method used in the first approach is shown to be inappropriate for this study, since it inconveniently generates zero-valued weights, allowing that an area under evaluation obtain the maximal score by not producing. Using weight restrictions, through the assurance region methods AR-O-C and AR-O-V, decreasing returns to scale are identified, meaning that the improvement in performance is not proportional to the size of the areas being analyzed. Observing data generated by the analysis, a study is carried out, aiming to design improvement goals for the inefficient areas. Complementing this study, GDP data for each area was compared with scores obtained using AR-O-V analysis. The results presented in this work show that DEA is a useful methodology for assessing sales team performance and that it may contribute to improvements on the quality of the management process.

Avaliação da eficiência dos investimentos do programa Inova-RN em micro e pequenas empresas Uma integração da análise envoltória de dados e índice Malmquist

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Fabricação de malha de trama utilizada como pré-formas na indústria de compósitos e avaliação das propriedades mecânicas

In the manufacture of composite, textile materials are being used as reinforcement. Generally, the combination of the matrix with the textile material in the form of fibres or yarns is used depending on their distribution in the web. In the present work, in place of fibres or yarns, a knitted structure in the form of the final product which is defined as preform. The preform is weft knit manufactured with polyester filaments. In the manufacture of composite, polyester resin was used as matrix. The physical and mechanical properties as well as the formability of the weft knit were analysed. The physical and mechanical properties as well as the formability of the knitted structure were analysed. The results obtained on the analysis show that the courses and wales of the weft knit structure and the tensile properties help the formability of the structure and the impregnation of the resin. It could be clearly observed that composite structure in the direction of the courses support more tension than in the direction of the wales. In relation to the three points flexural tests it was possible to note that there was more flexion in the direction of wales, what was expected. It was also possible to note that there are other advantages such as reduction in the loss of materials used, homogeneity in the distribution of the knitted structure in the mould, reduction in the preparation time and also in the reduction in the cost of manufacture

Análise da eficiência de aquecedor solar espiral com e sem efeito estufa para piscinas

The technical and economic viability of solar heating for swimming pools is unquestionable, besides there it replaces the high costs and environmental impacts of conventional supply of energy, and it improves an optimization in the pool heating uses. This work applies the principles of the greenhouse effect: advanced thermodynamics, heat retention and equalization of temperature, to optimize the solar heating equipment, reducing the area required by collectors as much as 40% (still estimated value) for commercial collectors, with minor architectural and aesthetic impacts on the environment. It features a solar heating alternative in pools, whose main characteristics: low cost, simplicity in manufacturing and assembly and a faster heating. The system consists of two collectors spiral hoses made of polyethylene with a hundred meters each, and working on a forced flow, with only one pass of the working fluid inside the coils, and is used to pump itself treatment of pool water to obtain the desired flow. One of the collectors will be exposed to direct solar radiation, and the other will be covered by a glass slide and closed laterally, so providing the greenhouse effect. The equipment will be installed in parallel and simultaneously exposed to the sun in order to obtain comparative data on their effectiveness. Will be presented results of thermal tests for this the two cases, with and without transparent cover. Will be demonstrated, by comparison, the thermal, economic and material feasibility of these systems for heating swimming pools.

Tubulações de PRFV com adição de areia quartzosa visando sua aplicação na indústria do petróleo

Fillers are often added in composites to enhance performance and/or to reduce cost. Fiberglass pipes must meet performance requirements and industrial sand is frequently added for the pipe to be cost competitive. The sand is added to increase pipe wall thickness, thus increase pipe stiffness. The main goal of the present work is to conduct an experimental investigation between pipes fabricated with and without de addition of sand, to be used in the petroleum industry. Pipes were built using E-glass fibers, polyester resin and siliceous sand. The fabrication process used hand lay up and filament winding and was divided in two different parts: the liner and the structural wall. All tested pipes had the same liner, but different structural wall composition, which is the layer where siliceous sand may be added or not. The comparative investigation was developed considering the results of longitudinal tensile tests, hoop tensile tests, hydrostatic pressure leak tests and parallel-plate loading stiffness tests. SEM was used to analyze if the sand caused any damage to the glass fibers, during the fabrication process, because of the fiber-sand contact. The procedure was also used to verify the composite conditions after the hydrostatic pressure leak test. The results proved that the addition of siliceous sand reduced the leak pressure in about 17 %. In the other hand, this loss in pressure was compensated by a stiffness increment of more than 380 %. MEV analyses show that it is possible to find damage on the fiber-sand contact, but on a very small amount. On most cases, the contact occurs without damage evidences. In summary, the addition of sand filler represented a 27.8 % of cost reduction, when compared to a pipe designed with glass fiber and resin only. This cost reduction combined to the good mechanical tests results make siliceous sand filler suitable for fiberglass pressure pipes