Improvement of open innovation processes: case Nokia

Open innovation is becoming increasingly popular in academic literature and in business life, but even if people heard about it, they might not understand what it really is, they may over-estimate it thinking that it is savior or underestimate it, concentrating on limitations and risks. Current work sheds light on most important concepts of open innovation theory. Goal of current research is to offer business processes improvement for both inbound and outbound modes in case company. It is relevant as open innovation proved to affect firms‘ performance in general case and in case company, and Nokia planned to develop open innovation implementation since 2008 but still competitors succeed in it more, therefore analysis of current situation with open innovation in Nokia and recommendations how to improve it are topical. Case study method was used to answer the question ―How open innovation processes can be improved?‖. 11 in-depth interviews with Nokia senior managers and independent consultants were used to reach the goal of the thesis, as well as secondary sources. Results of current work are as-is and to-be models (process models of today and best practices models) of several open innovation modes, and recommendation for case company, which will be presented to company representatives and checked for practical applicability.

The effectiveness of financial innovation support tools. Comparative study of Latvia and Finland

In the Innovation Union Scoreboard of 2011, Latvia ranked last amongst the EU countries in innovation performance. Even though there is sufficient scientific and technological basis, the results remain modest or low in most of the indicators concerning innovations. Several aspects influence the performance a national innovation system. In Latvia, the low effectiveness is often attributed to lack of financial support tools. As a comparison, Finland was chosen because of its well-established and documented innovation system. The aim of this study is to research the efficiency and effectiveness of the current financial innovation support tool system in Latvia from the point of view of an innovating company. It also attempts to analyze the support tool system of Latvia and compare to the relevant parts of the Finnish system. The study found that it is problematic for innovative companies in Latvia to receive the necessary funding especially for start-ups and SMEs due to the low number of grant programs, funds and lacking offer from banks, venture capital and business angels. To improve the situation, the Latvian government should restructure the funding mechanisms putting a bigger emphasis on innovative start-ups and SMEs. That would lay a foundation for future growth and boost research and scientific activities in Latvia.

The Finnish Paper Workers' Union at a crossroads: Labor union representativeness in a changing environment, 1980-2008

This thesis consists of four articles and an introductory section. The main research questions in all the articles refer to the changes in the representativeness of the Finnish Paper Workers' Union. Representativeness stands for the entire entity of external, internal, legal and reputational factors that enable the labor union to represent its members and achieve its goals. This concept is based on an extensive reading of quantitative and qualitative industrial relations literature, which includes works based on Marxist labor-capital relations (such as Hyman's industrial relations studies), and more recent union density studies as well as gender- and ethnic diversity-based 'union revitalization' studies. Müller-Jentsch's German studies of industrial relations have been of particular importance as well as Streeck's industrial unionism and technology studies. The concept of representativeness is an attempt to combine the insights of these diverse strands of literature and bring the scientific discussion of labor unions back to the core of a union's function: representing its members. As such, it can be seen as a theoretical innovation. The concept helps to acknowledge both the heterogeneity of the membership and the totality of a labor union organization. The concept of representativeness aims to move beyond notions of 'power'. External representativeness can be expressed through the position of the labor union in the industrial relations system and the economy. Internal representativeness focuses on the aspects of labor unions that relate to the function of the union as an association with members, such as internal democracy. Legal representativeness lies in the formal legal position of the union – its rights and instruments. This includes collective bargaining legislation, co-decision rules and industrial conflict legislation. Reputational representativeness is related to how the union is seen by other actors and the general public, and can be approximated using data on strike activity. All these aspects of representativeness are path-dependent, and show the results of previous struggles over issues. The concept of representativeness goes beyond notions of labor union power and symbolizes an attempt to bring back the focus of industrial relations studies to the union's basic function of representing its members. The first article shows in detail the industrial conflict of the Finnish paper industry in 2005. The intended focus was the issue of gender in the negotiations over a new collective agreement, but the focal point of the industrial conflict was the issue of outsourcing and how this should be organized. Also, the issue of continuous shifts as an issue of working time was very important. The drawn-out conflict can be seen as a struggle over principles, and under pressure the labor union had to concede ground on the aforementioned issues. The article concludes that in this specific conflict, the union represented its' female members to a lesser extent, because the other issues took such priority. Furthermore, because of the substantive concessions. the union lost some of its internal representativeness, and the stubbornness of the union may have even harmed the reputation of the union. This article also includes an early version of the representativeness framework, through which this conflict is analyzed. The second article discusses wage developments, union density and collective bargaining within the context of representativeness. It is shown that the union has been able to secure substantial benefits for its members, regardless of declining employment. Collective agreements have often been based on centralized incomes policies, but the paper sector has not always joined these. Attention is furthermore paid to the changing competition of the General Assembly, with a surprisingly strong position of the Left Alliance still. In an attempt to replicate analysis of union density measures, an analysis of sectoral union density shows that similar factors as in aggregate data influence this measure, though – due to methodological issues – the results may not be robust. On this issue, it can be said that the method of analysis for aggregate union density is not suitable for sectoral union density analysis. The increasingly conflict-ridden industrial relations predicted have not actually materialized. The article concludes by asking whether the aim of ever-increasing wages is a sustainable one in the light of the pressures of globalization, though wage costs are a relatively small part of total costs. The third article discusses the history and use of outsourcing in the Finnish paper industry. It is shown using Hyman's framework of constituencies that over time, the perspective of the union changed from 'members of the Paper Workers' Union' to a more specific view of who is a core member of the union. Within the context of the industrial unionism that the union claims to practice, this is an important change. The article shows that the union more and more caters for a core group, while auxiliary personnel is less important to the union's identity and constituencies, which means that the union's internal representativeness has decreased. Maintenance workers are an exception; the union and employers have developed a rotating system that increases the efficient allocation of these employees. The core reason of the exceptional status of maintenance personnel is their high level of non-transferable skills. In the end it is debatable whether the compromise on outsourcing solves the challenges facing the industry. The fourth article shows diverging discourses within the union with regard to union-employer partnership for competitiveness improvements and instruments of local union representatives. In the collective agreement of 2008, the provision regulating wage effects of significant changes in the organization or content of work was thoroughly changed, though this mainly reflected decisions by the Labor Court on the pre-2008 version of the provision. This change laid bare the deep rift between the Social Democratic and Left Alliance (ex-Communist) factions of the union. The article argues that through the changed legal meaning of the provision, the union was able to transform concession bargaining into a basis for partnership. The internal discontent about this issue is nonetheless substantial and a threat to the unity of the union, both locally and at the union level. On the basis of the results of the articles, other factors influencing representativeness, such as technology and EU law and an overview of the main changes in the Finnish paper industry, it is concluded that, especially in recent years, the Finnish Paper Workers' Union has lost some of its representativeness. In particular, the loss of the efficiency of strikes is noted, the compromise on outsourcing which may have alienated a substantial part of the union's membership, and the change in the collective agreement of 2008 have caused this decline. In the latter case, the internal disunion on that issue shows the constraints of the union's internal democracy. Furthermore, the failure of the union to join the TEAM industrial union (by democratic means), the internal conflicts and a narrow focus on its own sector may also hurt the union in the future, as the paper industry in Finland is going through a structural change. None of these changes in representativeness would have been so drastic without the considerable pressure of globalization - in particular changing markets, changing technology and a loss of domestic investments to foreign investments, which in the end have benefited the corporations more than the Finnish employees of these corporations. Taken together, the union risks becoming socially irrelevant in time, though it will remain formally very strong on the basis of its institutional setting and financial situation.

Innovation management of biorefineries in Finnish forest sector

The aim of this report is to give a comprehensive overview of the opportunities integrated biorefining can offer to Finnish forest industry companies and to assess what changes it would require from these companies to implement biorefining into their business. Also the strengths and weaknesses of the Finnish forest industry companies connected to biorefining are examined through innovation management theory frames, industry comparisons, company examples and couple of case-examples. The conclusions of the report include the statement that the Finnish forest industry has a good starting point for biorefinering and many advantages compared to other countries and industries. Unfortunately the history of the industry is holding it back and the thinking patterns would have to be altered to a more innovative and co-operational direction.

Improving product profitability control in continuous IT-services

The target of the thesis is to improve product profitability control in continuous IT-services. Accurate product cost accounting and correctly allocated revenues are a necessity for good product profitability control. The focus of the study is on costs and revenues that are not traced directly to services. The thesis is focused on revenue allocations as revenue allocation methods have not been used in the case company before. In order to achieve the target revenue allocation methods, which improve the product profitability accounting and control, are presented. The research methods used in the thesis are literature review and empirical case study. The research approach is constructive. The theoretical part is composed of literature and articles that create a base for the empirical part. Internal interviews describe the current situation in the company and based on it development actions are planned. The part of the empirical case study is seen mostly in the limitations as the research is limited to concern only one department in the company. Problems in the revenue tracing are caused by customer specific services and lack of service definitions because of which the revenues are not traced correctly. Methods to allocate revenues are presented in the thesis and stand-alone revenue allocation method is the most suitable one because it is fair and it can be modified. Approximate product profitability analysis is done in the thesis and the results of it indicate that some services are profitable and some unprofitable.

Innovation Project Portfolio Management

Companies today are forced to innovate in order to remain within business. Such innovation projects undertaken by the companies are defined in this study as creative ideas which have been managed through “Stage-Gate” innovation process. This process is used to manage innovation projects as they proceed from being newly created to ready for launching/implementing. This has ensured that the companies manage the innovation project right. However, with so many new creative ideas the companies can come up within limited resources, the companies must rely on Innovation Project Portfolio Management (IPPM) to ensure that they are managing only the right innovation projects. Although, there are many tools and techniques available for use within Project Portfolio Management, there is still no consensus on which are the most effective and no standard framework has been established especially for IPPM. Thus, this study proposes a practical framework for which individual innovative organization can follow as a guideline to manage its innovation project portfolio. The study theoretically first addresses the key differences between project portfolio management of innovation projects and other traditional projects - one of which is the stage nature of innovation projects due to their unclear objectives from the beginning compare to clearly established objectives of traditional projects. Secondly, different tools and techniques which can be used are examined based on the three goals of IPPM: (1) Maximizing the Value of Innovation Project Portfolio: Financial Methods, Decision Trees, Scoring Models and Checklists; (2) Balancing Innovation Project Portfolio: Visual Representations; and (3) Aligning Innovation Project Portfolio with Strategy: Bottom-Up (Scoring Models with Strategic Criteria) and Top-Down (Strategic Buckets). Finally, the two approaches in which IPPM can be integrated with Stage-Gate innovation process are discussed: (1) Gates- Dominated; and (2) Portfolio Reviews-Dominated. Practically, this study investigates IPPM of a case organization, and through analysis of the case study results proposes a practical framework for case organization to improve its current management of innovation project portfolio. This framework is then generalized to propose a final practical framework or guideline for which an innovative organization can follow to manage its innovation project portfolio.

Application of the scrum framework in non-software project management

Scrum is an agile project management approach that has been widely practiced in the software development projects. It has proven to increase quality, productivity, customer satisfaction, transparency and team morale among other benefits from its implementation. The concept of scrum is based on the concepts of incremental innovation strategies, lean manufacturing, kaizen, iterative development and so on and is usually contrasted with the linear development models such as the waterfall method in the software industry. The traditional approaches to project management such as the waterfall method imply intensive upfront planning and approval of the entire project. These sort of approaches work well in the well-defined stable environments where all the specifications of the project are known in the beginning. However, in the uncertain environments when a project requires continuous development and incorporation of new requirements, they do not tend to work well. The scrum framework was inspiraed by Nonaka’s article about new product developement and was later adopted by software development practitioners. This research explores conditions for and benefits of the application of scrum framework beyond software development projects. There are currently a few case studies on the scrum implementation in non-software projects, but there is a noticeable trend of it in the scrum practitioners’ community. The research is based on the real-life context multiple case study analysis of three different non-software projects. The results of the research showed that in order to succeed within scrum projects need to satisfy certain conditions – necessary and sufficient. Among them the key factors are uncertainty of the project environment, not well defined outcomes, commitment of the scrum teams and management support. The top advantages of scrum implementation identified in the present research include improved transparency, accountability, team morale, communications, cooperation and collaboration. Further researches are advised to be carried out in order to validate these findings on a larger sample and to focus on more specific areas of scrum project management implementation.

Reflexive model of research-based theatre – processing innovation at the crossroads of theatre, reflection and practice-based innovation activities

Contemporary organisations have to embrace the notion of doing ‘more with less’. This challenges knowledge production within companies and public organisations, forcing them to reorganise their structures and rethink what knowledge production actually means in the context of innovation and how knowledge is actually produced among various professional groups within the organisation in their everyday actions. Innovations are vital for organisational survival, and ‘ordinary’ employees and customers are central but too-often ignored producers of knowledge for contemporary organisations. Broader levels of participation and reflexive practices are needed. This dissertation discusses the missing links between innovation research conducted in the context of industrial management, arts, and culture; applied drama and theatre practices (specifically post-Boalian approaches); and learning – especially organising reflection – in organisational settings. This dissertation (1) explores and extends the role of research-based theatre to organising reflection and reflexive practices in the context of practice-based innovation, (2) develops a reflexive model of RBT for investigating and developing practice-based organisational process innovations in order to contribute to the development of a tool for innovation management and analysis, and (3) operationalises this model within private- and publicsector organisations. The proposed novel reflexive model of research-based theatre for investigating and developing practice-based organisational process innovations extends existing methods and offers a different way of organising reflection and reflexive practices in the context of general innovation management. The model was developed through five participatory action research processes conducted in four different organisations. The results provide learning steps – a reflection path – for understanding complex organisational life, people, and relations amid renewal and change actions. The proposed model provides a new approach to organising and cultivating reflexivity in practice-based innovation activities via research-based theatre. The results can be utilised as a guideline when processing practice-based innovation within private or public organisations. The model helps innovation managers to construct, together with their employees, temporary communities where they can learn together through reflecting on their own and each others’ experiences and to break down assumptions related to their own perspectives. The results include recommendations for practical development steps applicable in various organisations with regard to (i) application of research-based theatre and (ii) related general innovation management. The dissertation thus contributes to the development of novel learning approaches in knowledge production. Keywords: practice-based innovation, research-based theatre, learning, reflection, mode 2b knowledge production

On Innovative Search: the use of internal and external sources of innovation among Finnish innovators

This dissertation explores the use of internal and external sources of knowledge in modern innovation processes. It builds on a framework that combines theories such as a behavioural theory of the firm, the evolutionary theory of economic change, and modern approaches to strategic management. It follows the recent increase in innovation research focusing on the firm-level examination of innovative activities instead of traditional industry-level determinants. The innovation process is seen as a problem- and slack- driven search process, which can take several directions in terms of organizational boundaries in the pursuit of new knowledge and other resources. It thus draws on recent models of technological change, according to which firms nowadays should build their innovative activities on both internal and external sources of innovation rather than relying solely on internal resources. Four different research questions are addressed, all of which are empirically investigated via a rich dataset covering Finnish innovators collected by Statistics Finland. Firstly, the study examines how the nature of problems shapes the direction of any search for new knowledge. In general it demonstrates that the nature of the problem does affect the direction of the search, although under resource constraints firms tend to use external rather than internal sources of knowledge. At the same time, it shows that those firms that are constrained in terms of finance seem to search both internally and externally. Secondly, the dissertation investigates the relationships between different kinds of internal and external sources of knowledge in an attempt to find out where firms should direct their search in order to exploit the potential of a distributed innovation process. The concept of complementarities is applied in this context. The third research question concerns how the use of external knowledge sources – openness to external knowledge – influences the financial performance of firms. Given the many advantages of openness presented in the current literature, the focus is on how it shapes profitability. The results reveal a curvilinear relationship between profitability and openness (taking an inverted U-shape), the implication being that it pays to be open up to a certain point, but being too open to external sources may be detrimental to financial performance. Finally, the dissertation addresses some challenges in CISbased innovation research that have received relatively little attention in prior studies. The general aim is to underline the fact that comprehensive understanding of the complex process of technological change requires the constant development of methodological approaches (in terms of data and measures, for example). All the empirical analyses included in the dissertation are based on the Finnish CIS (Finnish Innovation Survey 1998-2000).

Service innovation development and knowledge integration practices - a comparative case study on KIBS sector

Academic research on services and innovations on services has significantly grown during recent years. So far research concerning management of knowledge intensive work on service development activities is very limited. The objective of this study was to examine knowledge integration practices that support service innovation development and to the best of knowledge such studies have not been previously published in academic literature. In the theoretical part of the study a review of state‐of‐the‐art literature was conducted, research gap was indicated and a framework for analysis was built. In the empirical part an explorative comparative multi‐case study was carried out in KIBS sector. Four companies were selected and four service development projects were inspected. The service development activities and knowledge integration practices were identified. The cases were carefully compared and results formed. The empirical results indicated that service innovation development is partly linear and partly incremental flow of activities where knowledge integration practices have important role supporting the planning and execution of tasks. Knowledge integration practices supporting planning and workshops are close interaction, interpretation, project planning and sequencing of work tasks. The identified knowledge integration practices supporting building service solution were careful role and competence management, routines and common knowledge. The main implication is that to manage knowledge intensive service innovation development a firm should carefully develop and choose relevant knowledge integration practices to support the service development activities.

Strategic Innovation Management Based on Three Dimensions

This thesis examines innovation development needs of firms in a remote rural region. The perspective of the study is in strategic innovation management and three dimensions of innovation development: innovation environment, value delivery and innovation capability. The framework is studied with a theoretical and methodological approach in the context of the development of a regional innovation system and the defining of innovation development needs. The thesis is based on existing innovation management literature, expanding it by examining the features of the three dimensions. The empirical data of the study comprise 50 purposefully selected firms within the region of Pielinen Karelia located in Eastern Finland. Most of the firms (70%) included in the study represent manufacturing firms, and over 90% are small and medium-sized enterprises. The research data consist of two questionnaires and an interview, which were done during 2011 in the connection of a regional development project. The point of view of the research is in regional development and harnessing the innovation capability of the firms within the region. The principal research approach applies soft systems methodology. The study explores the means to foster the innovativeness of firms from the viewpoints of innovation environment, innovation capability and value delivery. In closer detail, the study examines relations between the innovation capability factors, differences in innovation development needs within the value delivery system, between sectors and between firm size categories. The thesis offers three major contributions. First, the study extends earlier research on strategic innovation management by connecting the frameworks of innovation capability, innovation environment and value delivery process to the defining of innovation development needs at the regional level. The results deepen knowledge especially concerning practice-based innovation, peripheral regions and smaller firms. Second, the empirical work, based on a case study, confirms the existence of a structural connection integrating five factors of innovation capability. Statistical evidence is provided especially for the positive impacts of the improvement of absorption capability, marketing capability and networking capability, which are the main weaknesses of firms according to the study. Third, the research provides a methodological contribution by applying the innovation matrix in the defining of the innovation development needs of firms. The study demonstrates how the matrix improves possibility to target policy instruments and innovation services more efficiently through indicating significant differences between the innovation support needs regarding various time horizons and phases of innovation process.

The Impact of National Innovation System on Entrepreneurial Venture Creation Process

The important role of entrepreneurship in countries’ economic development and overall society well-being is widely recognized by researchers, experts as well as policy makers. Every phase of the process of starting a new business is related to the interaction with at least one player of country innovation system and therefore the efficiency of this interaction may have an influence on the success of whole entrepreneurial process and consequently on the willingness of potential entrepreneurs to engage into this process. The study proposes a System Dynamics model for studying the impact of National Innovation System (NIS) on the entrepreneurial venture creation process. The developed model also takes country population aspect into account and provides results for estimation the effect various demographic tendencies on the process performance. The special impact is made on possible ways to facilitate the development of entrepreneurial framework conditions. Business incubators are seen as one of the effective tool for accomplishing such task. The study also provides the result for estimation of possible impact arising from properly functioned Business Incubators.